Tender For Electrification Work At Honourable Balasaheb Thackeray Haridra Research And Training Centre,Vasmat,Dist.Hingoli, Basmat-Maharashtra

TDR : 49830125

Tender Notice
Corrigendum Details
BOQ

Expired

Basmat , Maharashtra

Tender Brief : Corrigendum : Tender For Electrification Work At Honourable Balasaheb Thackeray Haridra Research And Training Centre,Vasmat,Dist.Hingoli

Document Fees
₹ 5900 /-

EMD
₹ 10600000.0 /-

Tender Value
₹ 198.37 Crore /-

Submission Date
21-07-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	14-07-2025	Corrigendum	Date	21-07-2025

Name of Work:-HoNourable Balasaheb Thackeray Haridra Research & Training Centre, Vasmat, Dist-Hingoli.

Sl. No.	Item Description
1	HoNourable Balasaheb Thackeray Haridra Research & Training Centre, Vasmat, Dist-Hingoli.
2	Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. Number : As directed by Engineer-in-charge Ground Floor
3	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-40oftrap/granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Ground Floor
4	1st Floor & above
5	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-40oftrap/granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or asdirectedincludingsteelcentering,formwork,coverblocks,laying/pumping, compactionandrougheningthesurfaceifspecialfinishistobeprovidedandcuringetc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 1st Floor & above
6	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-40oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 1st Floor & above
7	Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, caNopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Ground Floor.
8	1st Floor & above
9	Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) – 1972) Ground Floor
10	1st Floor & above
11	Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. 1st Floor & above
12	Providing waterproofing in W.C. and bath including brick bat coba in all position including providingandlaying12mmbeddingincementmortor1:3onverginconcreteslabwith waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba ofrequired thickness in cm 1:5withwaterproofing compound1Kilogram/bag ofcement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years\" guarantee on requisite stamp paper including curing etc. Complete. Ground Floor
13	1st Floor
14	Providing and laying cement concrete flooring 50mm thick with M20 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/ square etc. finishing smooth (with extra cement) in any colour as directed and curing etc. complete.with Crushed sand VSI Grade. 1st Floor
15	Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Ground Floor
16	1st Floor & above
17	Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for Not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Ground Floor
18	1st Floor & above
19	Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 with fine cement finish 1.5 mm thick without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. Complete. Ground Floor
20	1st Floor & above
21	Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. Ground Floor
22	1st Floor & above
23	Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. Ground Floor
24	1st Floor & above
25	ProvidingandapplyingTextureplasterwithfinishingwithtexturematerial ofapproved makein 3 to 4 millimeterthickness on previously plastered surface, including Plaster Groove 6mmthicknessorTapeGrooves35to45mmthicknessorasrequired,inallposition including preparing the surface, scaffolding etc. complete. 1st Floor & above
26	Providing andapplying Twocoats ofwall care Putty onplastered surface andCeiling and Walls to prepare surface even and smooth of approved make, etc complete. Ground Floor
27	1st Floor & above
28	Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. Ground Floor
29	1st Floor & above
30	Providing and laying vitrified matt fininsh tileshaving size 590 mm to 605 mm x to 605 mm of8to10mmthicknessandconfirmingIS.15622-2006(GroupBla)ofapprovedmake, shadeandpatternforflooringinrequiredpositionlaidonabedof1:4cementmorar including neat cement float, filling joints, curing and cleaning etc. complete. Ground Floor
31	1st Floor & above
32	Providing and laying vitrified matt finish tileshaving size 590 mm to 605 mm x to 605 mm of8to10mmthicknessandconfirmingIS.15622-2006(GroupBla)ofapprovedmake, shadeandpatternfordadoandskirtinginrequiredpositionfixedin1:4cementmortar including neat cement float, filling joints, curing and cleaning etc. complete. Ground Floor
33	1st Floor & above
34	Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Rubyred / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. Ground Floor
35	Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade withfullmoulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaningetc. complete. Ground Floor
36	Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete. Ground Floor
37	1st Floor & above
38	Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. Ground Floor
39	1st Floor & above
40	Providing leatherfinishedpolishing to Kota/ Marble / Shahabad/ KadappaStone slabby continuous grinding in 4 coats of different bits to receive roughandmatty finish including buffingprocessbeforelayingandfixingofstoneasperdrawinganddesign,including cleaning, washing and finishingetc. complete. Ground Floor
41	1st Floor & above
42	Providing and laying telephone black / Amba White / Cadbury brown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler Noing/moulding the sharp edges wherever necessary, curing,etc. complete. Ground Floor
43	1st Floor & above
44	Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 mm to 30 mm thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. Ground Floor
45	1st Floor & above
46	Providing and applying two coats of textured synthetic paint of approved shade and quality andonecoatofprimerbeforeapplyingtexturedpaintincludingscaffoldingifnecessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. 1st Floor & above
47	Providing andapplyingimpression 24 carrat Luxury paint of approved make &approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surfaceintwocoats,includingsubsurfaceprparationbyAcrylicputtyandAcrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC). Ground Floor
48	1st Floor & above
49	Providing andapplying twocoatsofHighAlbedopainthavingminimum SolarReflective Index (SRI) 108 (with solar reflectance & thermal emittance tested as per ASTM) C 1549 and ASTMC1371respectively,VOClessthan10cc/gm.Thecoatingthicknessandthe methodology of application shall strctly as per manufacturer\"s specifitions and as approved by engineer in charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc, washing with water all complete.The contractor shall give guarantee for the performanceofSRIandalsothedurabitityofcoating,allcompleteasperdirectionof Engineer - in- incharge. 1st Floor & above
50	Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. Complete. Ground Floor
51	1st Floor & above
52	Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. Ground Floor
53	1st Floor & above
54	Providing High performance SGU (SHGC- 0.5, VLT-50%) for (as per 1868/1982) For UPVCSliding windows of Two track as per detail drawings and as directed ny Engineer in Charge. Ground Floor
55	1st Floor & above
56	Providing High performance SGU (SHGC- 0.5, VLT-50%) for (as per 1868/1982) For UPVCSliding windows of Three track as per detail drawings and as directed ny Engineer in Charge. Ground Floor
57	1st Floor & above
58	Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. Ground Floor
59	1st Floor & above
60	Providing High performance SGU (SHGC- 0.5, VLT-50%) for (as per 1868/1982) For UPVCSliding windows of Three track as per detail drawings and as directed ny Engineer in Charge. Ground Floor
61	1st Floor & above
62	Providing and fixing solid core flush door shutter in double leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium platedfixturesandfastenings,withbrassmortiselock,chromiumplatedhandlesonboth sides, and finishing with French Polish etc. Complete. Ground Floor
63	1st Floor & above
64	Providing & Fixing in position Acoustical Doors along with 150 x 150 mm teak wood frame, doors made from 50mm Teak wood frame 600 x600 c to c filled with 1000 Gsm synthetic wool 50mm thick.1st Floor & above
65	Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts, etc. of the required size on the top of the floor of the side of waiste slab with suitable arrangement as per approval of engineer in charge (for payment purpose, only the weight of the stainless steel members shall be considered excluding fixing accessories such as nut bolts, fasteners etc.). 50mm dia. pipe, 1.5mm thickness and weight 1.92Kilogram/ r. Metre. Ground Floor
66	Providing and fixing 40mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Gradeincludingfabricating,fixtures,errecting,necessarywelding,grinding, finishing, buffing to stainless steel pipe etc. complete. Ground Floor
67	Providing and fixing mild steel grill work for windows, ventilators, etc. 20 Kilogram/Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. Ground Floor
68	1st Floor & above
69	Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) Ground Floor
70	1st Floor & above
71	Providingandfixing90cmx60cm Graniteplateengraving10cm.Height letter,figures including painting the lefters/figures with approved colour and shade complete. Ground Floor
72	Providing and fixing factory made door/Window frames of required colour made with wood Polymer composite (WPC) extuded internal ribbed sections conforming to American Society for testing and materials (ASTM) in regard with density, tensile strength, flexural strength, Izod impact, water absorption and screw withdrawal strength with wall thickness of 5mm (+/1mm) and with frames having mitred joints at each corner, joined together by two No. of 10 x 8 mm & 40 mm long PVC dovetail keys including hard wood piece support along the full vertical and horizontal length in rebate portion hole for fixing hinges and fixtures and the frames fixed to Walls/columns with 15 mm long dash fasteners/holdfasts (dash fasteners/holdfasts to be paid separately) etc. complete as per the direction of Engineer in charge,with prior approval of concerned Superitending Engineer. 1.3 For Profile size of 125 x 50 mm with 38 x 12 mm rebate. Ground Floor
73	1st Floor & above
74	Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and iNorganic gases(Nox, VOC?s, CO, Sox, for maldehydes, etc.) in presence of natural or artificial light. It contains Graphene and naNoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company techNologist. Ground Floor
75	Providing & laying Terracotta tile of minimum thickness 10mm having size 300 mm. x 75 mm. confirming to corresponding I.S.for dadoin required position with readymade adhesive Kerakoll H40/ equivalent mortar of approved qualityincluding joint filling with approved colour Epoxy grout, cleaning curing, scaffolding, at all heights, etc. complete. Ground Floor
76	ProvidingandFixingof MineralFibreBoardAcousticalSuspendedCeilingSystemwith ultima(BevelledTegular)Edge Tilesofsize 15mm ExposedGRID.The tilesshouldhave Humidity Resistance (RH) of 99%, NRC 0.7, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 20mm , suitable for Green Building application, with Recycled content of 32%. The tile shall be laid on precoated G.I.channel onXL2 Clip having a web height of 32 mm with15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32 mm anda load carrying capacity of 7.7 Kilograms/M2 andminimum pull out strength of 100 Kilograms.. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 10 year warranty. products approved as per GRIHA and BS 476 etc. complete. Ground Floor
77	1st Floor & above
78	ProvidingandfixinginpositionGypsum boardfalseceilingwith12.5mm thickGypsum boards, screwed/fixedtotheunderstructureofsuspendedG.I.Gridconstructedand suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum centertocenterdistanceof600milimetreperimeterchannelandintermediatechannelsat maximumcentertocenterdistance1200milimetregalvanizedgridshouldbefixedto reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws.The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels.Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed inall respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. Ground Floor
79	1st Floor & above
80	Providing & Supplying, Design, Fabrication, Installation, Testing, Protection & Handover of Aluminium Semi-Unitized glazing system comprises of aluminium mullion, transoms and aluminium sash and subframe to with stand the design Wind Pressure of 1.50 Kpa (The system must pass the proof test at 1.5 times designed wind pressure without any failure). The system shall be fixed to the RCC structure (structural support only) withscrews, brackets and anchor fasteners. All Mild steel brackets shall be Hot dip galvanized minimum 80 micronsAll aluminium extrudedsections shall be of 6063 T6. (SGHC Value-0.27 & VLT-40%). The System should be designed to resist wind pressure 1.50 KPA as per IS codes and also to accommodate the building movements. All screws shall be stainless steel of SS 304 grade. All Anchor, bolts, nuts and washers used shall be only stainless steel of 304 grade. 1st Floor & above
81	Providing and fixing in position to the exact profile and prestressing the high tensile strands to specified ultimate strength, standard end anchorages, cable ducts, grouting ducts after prestressing and bearing plates with wedges as per detailed drawings including necessary plant and machinery for prestressing etc. Complete. 1st Floor & above
82	Providing and fixing ISI marked double swing flush door shutters conforming to IS :2202 (Part I) Non-decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel L- hinges with necessary screws Fittings & Fixturesper leaf SS kick plates on both sides of the door of 300mm height Heavy Duty satin finish butt SS Hinges (100mm x 75mm x 3mm in size)-4 No. SS finishedlever handle with mortise lock- 1 One Number Floor spring- 1 One Number 100mm x 100mm safety glass at the specified location. Ground Floor
83	1st Floor & above
84	Directional signageDesign, supply, fabrication and fixing acrylic multilingual Braille (raised dots) directional signboards of size 6\" x 9\"designed as per accessibility standards and having 4mm thick acrylic base plate with Upper Case San Serif words made of white acrylic Non glare cut out letters of height 15mm raised Not less than 0.8mm above base plate and the equivalent word written in Hindi with Devnagri Non glare acrylic letters of height 15mm raised Not less than 0.8mm above base plate and having a Non glare acrylic cut arrow pointing in the required direction. Each signboard to be fixed as per manufacturers specifications on the wall at the approved location and at a height of 1200mm from FFL and as per the directions by the engineer in charge. Ground Floor
85	1st Floor & above
86	Providing and fixing in position U.P.V.C.(Unplasticized Poly Vinyl Chloride) having multi- chambered outer frame section (73 x 50)mm with an outer wall thickness of 2mm & steel reinforcement, multi-chambered slider frame (73x 60) mm with steel reinforcement, multi- chambered slider sash (46x 82) mm with steel reinforcement designed to give optimum strength, 5 mm thick toughened double glass with 12 mm spacer of good quality including alluminium track, Inter-locking profile, coextruded beadings, EPDM gaskets,silicon sealent,sliding handle, fixtures and fastenings (couplings, hinges) including with all required screws and nuts with all necessary U.P.V.C. sections as per the detailed drawing and as directed by Engineer-In-Charge etc. Complete. Two track Window. Ground Floor
87	1st Floor & above
88	Providing and fixing in position U.P.V.C.(Unplasticized Poly Vinyl Chloride) having multi- chambered outer frame section (73 x 50)mm with an outer wall thickness of 2mm & steel reinforcement, multi-chambered slider frame (73x 60) mm with steel reinforcement, multi- chambered slider sash (46x 82) mm with steel reinforcement designed to give optimum strength, 5 mm thick toughened double glass with 12 mm spacer of good quality including alluminium track, Inter-locking profile, coextruded beadings, EPDM gaskets,silicon sealent,sliding handle, fixtures and fastenings (couplings, hinges) including with all required screws and nuts with all necessary U.P.V.C. sections as per the detailed drawing and as directed by Engineer-In-Charge etc. Complete. Three track Window. Ground Floor
89	1st Floor & above
90	Providing and fixing in position U.P.V.C.(Unplasticized Poly Vinyl Chloride) having multi- chambered outer frame section (73 x 50)mm with an outer wall thickness of 2mm & steel reinforcement, multi-chambered slider frame (73x 60) mm with steel reinforcement, multi- chambered slider sash (46x 82) mm with steel reinforcement designed to give optimum strength, 5 mm thick toughened double glass with 12 mm spacer of good quality including alluminium track, Inter-locking profile, coextruded beadings, EPDM gaskets,silicon sealent,sliding handle, fixtures and fastenings (couplings, hinges) including with all required screws and nuts with all necessary U.P.V.C. sections as per the detailed drawing and as directed by Engineer-In-Charge etc. Complete. Ventilators. Ground Floor
91	1st Floor & above
92	Supplying and spreading geofabric filter layer of Geotextile of Polypropylene multifilament woven to the line, level and grade with pore size less than 0.075 mm and permeability greater than 9.0 litre/ One Square Metre/second confirming specification IS:1969 and ASTM standard including conveying to the site, joining and stitching with proper overlap and laying at excavated surface in tidal condition as directed by Engineerin- Charge etc. complete.1st Floor & above
93	WATERPROOFING CUM INSULATION COMPOSITE SYSTEM:-Cleaning the surface to make it dust free andsludge free, removing any extended portions by grinding and if required using suitable equipment’s and should be totally dry & have proper slope for free flow of water Preparing the surface by spray applying a coat of Bitumen primer @0.25-0.35Kg/Sqm over the entire dust free surface. Providing and applying single layer of Ultraplast B APP- 4mm (Atactic Polypropylene Polymer) modified water proofing membrane reinforced with Non-woven polyester matt 160+20 g/m2 having polymer film as a top surface. Minimum tensile strength in longitudinal and transverse direction as 750N +150 / 600N +120/5cm (ASTM D 5147). Minimum nail shank tear resistance in longitudinal and transverse direction as 300/300N + 100 N (ASTM D 4073) elongation in Longitudinal and transverse direction 40+8% / 45+9%. Softening point of membrane Not less than 150 + 5 Degree Celsius consisting of a coat of TechNonicol Bitumen Primer No 01 primer @ 0.25- 0.35 ltr./sq.mtr with a relative viscosity of 15-40 s,. Over the primer coat, the layer of membrane shall be laid using Butane / LPG torch and sealing all joints with minimum 75 mm side laps & 100 mm end laps to form a moNolithic system. The laying of membrane shall be got done through the authorized applicator of the manufacturer of membrane.Providing and laying LEED certified Carbon Prof 300 Extruded Polystyrene 50mm thick having thermal conductivity of 0.028 W/mK (ASTM C 177) with compressive strength of > 300 Kpa (ASTM D 1621 EN 826) and density of 30-35 Kg/m3. Long term water immersion ASTM C 272 (EN12087) < 0.7% over the waterproofing membrane having Shiplap arrangement. Work shall be done through the authorized authorized applicator of the manufacturer of the Insulation Board. 1st Floor & above
94	Providing and laying LEED certified Carbon Prof 300 Extruded Polystyrene 50mm thick having thermal conductivity of 0.028 W/mK (ASTM C 177) with compressive strength of > 300 Kpa (ASTM D 1621 EN 826) and density of 30-35 Kg/m3. Long term water immersion ASTM C 272 (EN12087) < 0.7% over the waterproofing membrane having Shiplap arrangement. Work shall be done through the authorized applicator of the manufacturer of the Insulation Board. 1st Floor & above
95	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite /quartzite/gneissmetalforR.C.C.columnsasperdetaileddesignsanddrawingsoras directedincludingsteelcentering,formwork,coverblocks,laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smoothand even surface or roughening if special finish is to be providedand curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
96	1st Floor
97	ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcementandstructuralsteel).withfullyautomaticmicroprocessorbasedPLCwith SCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc. complete. With fine aggregate (Crushed sand VSI Grade) Ground Floor
98	1st Floor
99	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Ground Floor
100	1st Floor
101	Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Ground Floor
102	1st Floor
103	Providing and laying Cast in situ/ReadyMix cement concrete inM-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, coverblocks, laying/pumping, compactingand roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).withfully automaticmicro processor based PLC with SCADAenabled reversibleDrumTypemixer/ concreteBatchmix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Ground Floor
104	Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
105	1st Floor
106	Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, caNopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Ground Floor.
107	1st Floor
108	Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) – 1972) Ground Floor
109	1st Floor
110	Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. Making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. Complete. Ground Floor
111	1st Floor
112	Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete.1st Floor
113	Providing waterproofing in W.C. and bath including brick bat coba in all position including providingandlaying12mmbeddingincementmortor1:3onverginconcreteslabwith waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba ofrequired thickness in cm 1:5withwaterproofing compound1Kilogram/bag ofcement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years\" guarantee on requisite stamp paper including curing etc. Complete. Ground Floor
114	1st Floor
115	Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Ground Floor
116	1st Floor
117	Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for Not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Ground Floor
118	1st Floor
119	Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 with fine cement finish 1.5 mm thick without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. Complete. Ground Floor
120	1st Floor
121	Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. Ground Floor
122	1st Floor
123	Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc. Complete. Ground Floor
124	1st Floor
125	Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. Ground Floor
126	1st Floor
127	Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. Ground Floor
128	1st Floor
129	Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S.for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. Ground Floor
130	1st Floor
131	Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Rubyred / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. Ground Floor
132	Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete. Ground Floor
133	1st Floor
134	Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. Ground Floor
135	1st Floor
136	Providing and laying vitrified rustic matt stone finish tileshaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approvedmake,shadeandpatternforflooringinrequiredpositionlaid onabedof1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. Complete. Ground Floor
137	1st Floor
138	Providing and laying vitrified rustic matt stone finish tileshaving size 590 mm to 605 mm x 590 mm to 605 mm to 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approvedmake,shadeandpatternfordadoandskirtinginrequiredpositionfixedin1:4 cement mortar including neat cement float, filling joints, curing and cleaning. etc. Complete. Ground Floor
139	1st Floor
140	Providing and laying telephone black / Amba White / Cadbury brown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler Noing/moulding the sharp edges wherever necessary, curing,etc. complete. Ground Floor
141	1st Floor
142	Providing andapplyingimpression 24 carrat Luxury paint of approved make &approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surfaceintwocoats,includingsubsurfaceprparationbyAcrylicputtyandAcrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC). Ground Floor
143	1st Floor
144	Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. Complete. Ground Floor
145	1st Floor
146	Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. Ground Floor
147	1st Floor
148	Providing High performance SGU (SHGC- 0.5, VLT-50%) for (as per 1868/1982) For UPVC Sliding windows of Three track as per detail drawings and as directed ny Engineer in Charge. Ground Floor
149	1st Floor & above
150	Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. Ground Floor
151	1st Floor
152	Providing High performance SGU (SHGC- 0.5, VLT-50%) for (as per 1868/1982) For aluminium louvered windows / ventilator as per detail drawings and as directed ny Engineer in Charge. Ground Floor
153	1st Floor
154	Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts, etc. of the required size on the top of the floor of the side of waiste slab with suitable arrangement as per approval of engineer in charge (for payment purpose, only the weight of the stainless steel members shall be considered excluding fixing accessories such as nut bolts, fasteners etc.). 50mm dia. pipe, 1.5mm thickness and weight 1.92Kilogram/ r. Metre. Ground Floor
155	Providing and fixing mild steel grill work for windows, ventilators, etc. 20 Kilogram/Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. Ground Floor
156	1st Floor
157	Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m). Ground Floor
158	1st Floor
159	Providing and fixing 90 cm. x 60 cm. Granite plateengraving 10cm. height letter, figuresincluding painting the letters /figures with approved colour and shade complete. Ground Floor
160	Providing and laying in situ M-20 cement concrete of trap / granite / quartzite / gneiss metal with 15% plum of trap stones for foundation and bedding of retaining walls and jetty etc. including necessary formwork, compacting, curing, bailing out water manually in tidal range etc. Complete. Ground Floor
161	Providing and fixing factory made door/Window frames of required colour made with wood Polymer composite (WPC) extuded internal ribbed sections conforming to American Society for testing and materials (ASTM) in regard with density, tensile strength, flexural strength, Izod impact, water absorption and screw withdrawal strength with wall thickness of 5mm (+/1mm) and with frames having mitred joints at each corner, joined together by two No. of 10 x 8 mm & 40 mm long PVC dovetail keys including hard wood piece support along the full vertical and horizontal length in rebate portion hole for fixing hinges and fixtures and the frames fixed to Walls/columns with 15 mm long dash fasteners/holdfasts (dash fasteners/holdfasts to be paid separately) etc. complete as per the direction of Engineer in charge,with prior approval of concerned Superitending Engineer. 1.3 For Profile size of 125 x 50 mm with 38 x 12 mm rebate. Ground Floor
162	1st Floor
163	Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and iNorganic gases(Nox, VOC?s, CO, Sox, for maldehydes, etc.) in presence of natural or artificial light. It contains Graphene and naNoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company techNologist. Ground Floor
164	1st Floor
165	Providing and laying Terracotta tile of minimum thickness 10mm having size 300 mm. x 75 mm. confirming to corresponding I.S.for dadoin required position with readymade adhesive Kerakoll H40/ equivalent mortar of approved qualityincluding joint filling with approved colour Epoxy grout, cleaning curing, scaffolding, at all heights, etc. complete. Ground Floor
166	1st Floor
167	Providing fixing Mangalore tile roofing with class AA tiles in cement mortar 1:4 on sloping slab including necessary scaffolding, curing, finishing, etc. Complete. 1st Floor
168	Providing and fixing in position U.P.V.C.(Unplasticized Poly Vinyl Chloride) having multi- chambered outer frame section (73 x 50)mm with an outer wall thickness of 2mm & steel reinforcement, multi-chambered slider frame (73x 60) mm with steel reinforcement, multi- chambered slider sash (46x 82) mm with steel reinforcement designed to give optimum strength, 5 mm thick toughened double glass with 12 mm spacer of good quality including alluminium track, Inter-locking profile, coextruded beadings, EPDM gaskets,silicon sealent,sliding handle, fixtures and fastenings (couplings, hinges) including with all required screws and nuts with all necessary U.P.V.C. sections as per the detailed drawing and as directed by Engineer-In-Charge etc. Complete. Three track Window. Ground Floor
169	1st Floor & above
170	Providing and fixing in position U.P.V.C.(Unplasticized Poly Vinyl Chloride) having multi- chambered outer frame section (73 x 50)mm with an outer wall thickness of 2mm & steel reinforcement, multi-chambered slider frame (73x 60) mm with steel reinforcement, multi- chambered slider sash (46x 82) mm with steel reinforcement designed to give optimum strength, 5 mm thick toughened double glass with 12 mm spacer of good quality including alluminium track, Inter-locking profile, coextruded beadings, EPDM gaskets,silicon sealent,sliding handle, fixtures and fastenings (couplings, hinges) including with all required screws and nuts with all necessary U.P.V.C. sections as per the detailed drawing and as directed by Engineer-In-Charge etc. Complete. Ventilators. Ground Floor
171	1st Floor & above
172	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite /quartzite/gneissmetalforR.C.C.columnsasperdetaileddesignsanddrawingsoras directedincludingsteelcentering,formwork,coverblocks,laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smoothand even surface or roughening if special finish is to be providedand curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
173	1st Floor
174	ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcementandstructuralsteel).withfullyautomaticmicroprocessorbasedPLCwith SCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
175	1st Floor
176	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
177	1st Floor
178	Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
179	1st Floor
180	Providing and laying Cast in situ/ReadyMix cement concrete inM-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, coverblocks, laying/pumping, compactingand roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).withfully automaticmicro processor based PLC with SCADAenabled reversibleDrumTypemixer/ concreteBatchmix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
181	Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
182	1st Floor
183	Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, caNopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Ground Floor.
184	1st Floor
185	Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) – 1972) Ground Floor
186	1st Floor
187	ProvidingAutoclavedAeratedConcreteBlockmasonaryofconforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech orequivalentinHalfbrickthickwallincludingstrikingjoints,rakingoutjointsand scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) – 1972). Ground Floor
188	1st Floor
189	Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. Making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. Complete. Ground Floor
190	1st Floor
191	Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. 1st Floor
192	Providing waterproofing in W.C. and bath including brick bat coba in all position including providingandlaying12mmbeddingincementmortor1:3onverginconcreteslabwith waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba ofrequired thickness in cm 1:5withwaterproofing compound1Kilogram/bag ofcement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years\" guarantee on requisite stamp paper including curing etc. Complete. Ground Floor
193	1st Floor
194	Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Ground Floor
195	1st Floor
196	Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for Not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Ground Floor
197	1st Floor
198	Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 with fine cement finish 1.5 mm thick without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. Complete. Ground Floor
199	1st Floor
200	Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. Ground Floor
201	1st Floor
202	Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. Ground Floor
203	1st Floor
204	Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. Ground Floor
205	1st Floor
206	Providing and laying vitrified matt fininsh tileshaving size 590 mm to 605 mm x to 605 mm of8to10mmthicknessandconfirmingIS.15622-2006(GroupBla)ofapprovedmake, shadeandpatternforflooringinrequiredpositionlaidonabedof1:4cementmorar including neat cement float, filling joints, curing and cleaning etc. complete. Ground Floor
207	1st Floor
208	Providing and laying vitrified matt finish tileshaving size 590 mm to 605 mm x to 605 mm of8to10mmthicknessandconfirmingIS.15622-2006(GroupBla)ofapprovedmake, shadeandpatternfordadoandskirtinginrequiredpositionfixedin1:4cementmortar including neat cement float, filling joints, curing and cleaning etc. complete. Ground Floor
209	1st Floor
210	Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Rubyred / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. Ground Floor
211	Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade withfullmoulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaningetc. complete.
212	Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete. Ground Floor
213	1st Floor
214	Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. Ground Floor
215	1st Floor
216	Providing and laying vitrified rustic matt stone finish tileshaving size 590 mm to 605 mm x 590 mm to 605 mm in Flooring, Ground Floor
217	1st Floor
218	Providing and laying vitrified rustic matt stone finish tileshaving size 590 mm to 605 mm x 590 mm to 605 mm to 8 to 10mm thickness for dado and skirting. Ground Floor
219	1st Floor
220	Providing and laying telephone black / Amba White / Cadbury brown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler Noing/moulding the sharp edges wherever necessary, curing,etc. complete. Ground Floor
221	1st Floor
222	Providing andapplyingimpression 24 carrat Luxury paint of approved make &approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surfaceintwocoats,includingsubsurfaceprparationbyAcrylicputtyandAcrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC). Ground Floor
223	1st Floor
224	Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. Complete. Ground Floor
225	1st Floor
226	Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. Ground Floor
227	1st Floor
228	Providing High performance SGU (SHGC- 0.5, VLT-50%) for (as per 1868/1982) For UPVCSliding windows of Two track as per detail drawings and as directed ny Engineer in Charge. Ground Floor
229	1st Floor & above
230	Providing High performance SGU (SHGC- 0.5, VLT-50%) for (as per 1868/1982) For UPVC Sliding windows of Three track as per detail drawings and as directed ny Engineer in Charge. Ground Floor
231	1st Floor
232	Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. Ground Floor
233	1st Floor
234	Providing High performance SGU (SHGC- 0.5, VLT-50%) for (as per 1868/1982) For UPVC Sliding windows of Three track as per detail drawings and as directed ny Engineer in Charge. Ground Floor
235	1st Floor
236	Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts, etc. of the required size on the top of the floor of the side of waiste slab with suitable arrangement as per approval of engineer in charge (for payment purpose, only the weight of the stainless steel members shall be considered excluding fixing accessories such as nut bolts, fasteners etc.). 50mm dia. pipe, 1.5mm thickness and weight 1.92Kilogram/ r. Metre. Ground Floor
237	1st Floor
238	Providing and fixing mild steel grill work for windows, ventilators, etc. 20 Kilogram/Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. Ground Floor
239	1st Floor
240	Providing and fixing 90 cm. x 60 cm. Granite plateengraving 10cm. height letter, figuresincluding painting the letters /figures with approved colour and shade complete. Ground Floor
241	Providing and laying in situ M-20 cement concrete of trap / granite / quartzite / gneiss metal with 15% plum of trap stones for foundation and bedding of retaining walls and jetty etc. including necessary formwork, compacting, curing, bailing out water manually in tidal range etc. Complete.
242	Providing and fixing factory made door/Window frames of required colour made with wood Polymer composite (WPC) extuded internal ribbed sections conforming to American Society for testing and materials (ASTM) in regard with density, tensile strength, flexural strength, Izod impact, water absorption and screw withdrawal strength with wall thickness of 5mm (+/1mm) and with frames having mitred joints at each corner, joined together by two No. of 10 x 8 mm & 40 mm long PVC dovetail keys including hard wood piece support along the full vertical and horizontal length in rebate portion hole for fixing hinges and fixtures and the frames fixed to Walls/columns with 15 mm long dash fasteners/holdfasts (dash fasteners/holdfasts to be paid separately) etc. complete as per the direction of Engineer in charge,with prior approval of concerned Superitending Engineer. 1.3 For Profile size of 125 x 50 mm with 38 x 12 mm rebate. Ground Floor
243	1st Floor
244	Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and iNorganic gases(Nox, VOC?s, CO, Sox, for maldehydes, etc.) in presence of natural or artificial light. It contains Graphene and naNoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company techNologist. Ground Floor
245	1st Floor
246	Providing and laying Terracotta tile of minimum thickness 10mm having size 300 mm. x 75 mm. confirming to corresponding I.S.for dadoin required position with readymade adhesive mortar of approved qualityincluding joint filling with white/ colour cement slurry cleaning curing etc. complete. Ground Floor
247	1st Floor
248	Providing fixing Mangalore tile roofing with class AA tiles in cement mortar 1:4 on sloping slab including necessary scaffolding, curing, finishing, etc. Complete. Ground Floor
249	Providing and fixing in position U.P.V.C.(Unplasticized Poly Vinyl Chloride) having multi- chambered outer frame section (73 x 50)mm with an outer wall thickness of 2mm & steel reinforcement, multi-chambered slider frame (73x 60) mm with steel reinforcement, multi- chambered slider sash (46x 82) mm with steel reinforcement designed to give optimum strength, 5 mm thick toughened double glass with 12 mm spacer of good quality including alluminium track, Inter-locking profile, coextruded beadings, EPDM gaskets,silicon sealent,sliding handle, fixtures and fastenings (couplings, hinges) including with all required screws and nuts with all necessary U.P.V.C. sections as per the detailed drawing and as directed by Engineer-In-Charge etc. Complete. Two track Window. Ground Floor
250	1st Floor & above
251	Providing and fixing in position U.P.V.C.(Unplasticized Poly Vinyl Chloride) having multi- chambered outer frame section (73 x 50)mm with an outer wall thickness of 2mm & steel reinforcement, multi-chambered slider frame (73x 60) mm with steel reinforcement, multi- chambered slider sash (46x 82) mm with steel reinforcement designed to give optimum strength, 5 mm thick toughened double glass with 12 mm spacer of good quality including alluminium track, Inter-locking profile, coextruded beadings, EPDM gaskets,silicon sealent,sliding handle, fixtures and fastenings (couplings, hinges) including with all required screws and nuts with all necessary U.P.V.C. sections as per the detailed drawing and as directed by Engineer-In-Charge etc. Complete. Three track Window. Ground Floor
252	1st Floor & above
253	Providing and fixing in position U.P.V.C.(Unplasticized Poly Vinyl Chloride) having multi- chambered outer frame section (73 x 50)mm with an outer wall thickness of 2mm & steel reinforcement, multi-chambered slider frame (73x 60) mm with steel reinforcement, multi- chambered slider sash (46x 82) mm with steel reinforcement designed to give optimum strength, 5 mm thick toughened double glass with 12 mm spacer of good quality including alluminium track, Inter-locking profile, coextruded beadings, EPDM gaskets,silicon sealent,sliding handle, fixtures and fastenings (couplings, hinges) including with all required screws and nuts with all necessary U.P.V.C. sections as per the detailed drawing and as directed by Engineer-In-Charge etc. Complete. Ventilators. Ground Floor
254	1st Floor & above
255	Cutting down trees including trunks and branches with girths above 30cm to 60cm and stacking the materials neatly with all lifts and lead of 1000m as directed and earth filling in the depression / pit if any.
256	Cutting down trees including trunks and branches with girths above 60cm to 90cm and stacking the materials neatly with all lifts and lead of 1000m. as directed and earth filling in the depression/pit if any.
257	Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil Not exceeding 150 mm in thickness.
258	Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)
259	Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 5.0 to 9.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)
260	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means
261	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift 1.5m to 3.0m ). By Mechanical Means
262	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(lift 3.0m to 4.5m ). By Mechanical Means
263	Disposing the excess excavated material Soil, Earth obtained from the items of excavation and disposing the same off the site and at dumping place approved by the governing authority including loading, unloading and all leads and lifts complete.
264	Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent ofclorophyrifosper square metre of surface area covering ten years guarantee on bond paper.
265	Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent ofaldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper.
266	Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. Complete.
267	Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. Complete.
268	Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.
269	Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. Number : As directed by Engineer-in-charge. Ground Floor
270	1st Floor
271	Providing and laying Cast in situ/Ready Mixcement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will Not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
272	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/quartzite/gneissmetalforR.C.C.workinfoundationslike raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork,coverblocks,laying/pumping,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
273	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite /quartzite/gneissmetalforR.C.C.columnsasperdetaileddesignsanddrawingsoras directedincludingsteelcentering,formwork,coverblocks,laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smoothand even surface or roughening if special finish is to be providedand curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
274	1st Floor
275	ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcementandstructuralsteel).withfullyautomaticmicroprocessorbasedPLCwith SCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
276	1st Floor
277	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
278	1st Floor
279	Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
280	1st Floor
281	Providing and laying Cast in situ/ReadyMix cement concrete inM-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, coverblocks, laying/pumping, compactingand roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).withfully automaticmicro processor based PLC with SCADAenabled reversibleDrumTypemixer/ concreteBatchmix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
282	ProvidingandlayingCastinsitu/ReadyMixcementconcretein M-25oftrap/quartzite/granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawingsorasdirectedincludingsteelcentering,plywood/steelformwork,steelprops, laying/pumping,compaction,finishing unevenandhoneycombedsurface withC.M.1:3of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversibleDrumType mixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate(Crushed sand VSI Grade). Ground Floor
283	Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
284	1st Floor
285	Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, caNopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Ground Floor.
286	1st Floor
287	Providing fly ash brick masonry with conventional / I.S. type fly ash bricksin C.M. 1:6 in foundation and plinth includingbailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.
288	Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) – 1972). Ground Floor
289	1st Floor
290	Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. Making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. Complete. Ground Floor
291	1st Floor
292	Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. 1st Floor
293	Providing waterproofing in W.C. and bath including brick bat coba in all position including providingandlaying12mmbeddingincementmortor1:3onverginconcreteslabwith waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba ofrequired thickness in cm 1:5withwaterproofing compound1Kilogram/bag ofcement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years\" guarantee on requisite stamp paper including curing etc. Complete. Ground Floor
294	1st Floor
295	Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Ground Floor
296	1st Floor
297	Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for Not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Ground Floor
298	1st Floor
299	Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 with fine cement finish 1.5 mm thick without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. Complete. Ground Floor
300	1st Floor
301	Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. Ground Floor
302	1st Floor
303	Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. Ground Floor
304	1st Floor
305	Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. Ground Floor
306	1st Floor
307	Providing and laying vitrified matt fininsh tileshaving size 590 mm to 605 mm x to 605 mm of8to10mmthicknessandconfirmingIS.15622-2006(GroupBla)ofapprovedmake, shadeandpatternforflooringinrequiredpositionlaidonabedof1:4cementmorar including neat cement float, filling joints, curing and cleaning etc. complete. Ground Floor
308	1st Floor
309	Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Rubyred / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. Ground Floor
310	Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade withfullmoulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaningetc. complete. Ground Floor
311	Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete. Ground Floor
312	1st Floor
313	Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. Ground Floor
314	1st Floor
315	Providing and laying vitrified rustic matt stone finish tileshaving size 590 mm to 605 mm x 590 mm to 605 mm in Flooring. Ground Floor
316	1st Floor
317	Providing and laying vitrified rustic matt stone finish tileshaving size 590 mm to 605 mm x 590 mm to 605 mm to 8 to 10mm thickness for dado and skirting. Ground Floor
318	1st Floor
319	Providing and laying telephone black / Amba White / Cadbury brown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler Noing/moulding the sharp edges wherever necessary, curing,etc. complete. Ground Floor
320	1st Floor
321	Providing andapplyingimpression 24 carrat Luxury paint of approved make &approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surfaceintwocoats,includingsubsurfaceprparationbyAcrylicputtyandAcrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC). Ground Floor
322	1st Floor
323	Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. Complete. Ground Floor
324	1st Floor
325	Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. Ground Floor
326	1st Floor
327	Providing High performance SGU (SHGC- 0.5, VLT-50%) for (as per 1868/1982) For UPVC Sliding windows of Three track as per detail drawings and as directed ny Engineer in Charge. Ground Floor
328	1st Floor
329	Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. Ground Floor
330	1st Floor
331	Providing High performance SGU (SHGC- 0.5, VLT-50%) for (as per 1868/1982) For UPVCSliding windows of Three track as per detail drawings and as directed ny Engineer in Charge. Ground Floor
332	1st Floor
333	Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts, etc. of the required size on the top of the floor of the side of waiste slab with suitable arrangement as per approval of engineer in charge (for payment purpose, only the weight of the stainless steel members shall be considered excluding fixing accessories such as nut bolts, fasteners etc.). 50mm dia. pipe, 1.5mm thickness and weight 1.92Kilogram/ r. Metre. Ground Floor
334	Providing and fixing mild steel grill work for windows, ventilators, etc. 20 Kilogram/Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. Ground Floor
335	1st Floor
336	Providing and fixing 90 cm. x 60 cm. Granite plateengraving 10cm. height letter, figuresincluding painting the letters /figures with approved colour and shade complete. Ground Floor
337	Providing and laying in situ M-20 cement concrete of trap / granite / quartzite / gneiss metal with 15% plum of trap stones for foundation and bedding of retaining walls and jetty etc. including necessary formwork, compacting, curing, bailing out water manually in tidal range etc. Complete.
338	Providing and fixing factory made door/Window frames of required colour made with wood Polymer composite (WPC) extuded internal ribbed sections conforming to American Society for testing and materials (ASTM) in regard with density, tensile strength, flexural strength, Izod impact, water absorption and screw withdrawal strength with wall thickness of 5mm (+/1mm) and with frames having mitred joints at each corner, joined together by two No. of 10 x 8 mm & 40 mm long PVC dovetail keys including hard wood piece support along the full vertical and horizontal length in rebate portion hole for fixing hinges and fixtures and the frames fixed to Walls/columns with 15 mm long dash fasteners/holdfasts (dash fasteners/holdfasts to be paid separately) etc. complete as per the direction of Engineer in charge,with prior approval of concerned Superitending Engineer. 1.3 For Profile size of 125 x 50 mm with 38 x 12 mm rebate. Ground Floor
339	1st Floor
340	Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and iNorganic gases(Nox, VOC?s, CO, Sox, for maldehydes, etc.) in presence of natural or artificial light. It contains Graphene and naNoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company techNologist. Ground Floor
341	1st Floor
342	Providing and laying Terracotta tile of minimum thickness 10mm having size 300 mm. x 75 mm. confirming to corresponding I.S.for dadoin required position with readymade adhesive mortar of approved qualityincluding joint filling with white/ colour cement slurry cleaning curing etc. complete. Ground Floor
343	1st Floor
344	Providing fixing Mangalore tile roofing with class AA tiles in cement mortar 1:4 on sloping slab including necessary scaffolding, curing, finishing, etc. Complete. 1st Floor
345	Providing and fixing in position U.P.V.C.(Unplasticized Poly Vinyl Chloride) having multi- chambered outer frame section (73 x 50)mm with an outer wall thickness of 2mm & steel reinforcement, multi-chambered slider frame (73x 60) mm with steel reinforcement, multi- chambered slider sash (46x 82) mm with steel reinforcement designed to give optimum strength, 5 mm thick toughened double glass with 12 mm spacer of good quality including alluminium track, Inter-locking profile, coextruded beadings, EPDM gaskets,silicon sealent,sliding handle, fixtures and fastenings (couplings, hinges) including with all required screws and nuts with all necessary U.P.V.C. sections as per the detailed drawing and as directed by Engineer-In-Charge etc. Complete. Three track Window. Ground Floor
346	1st Floor & above
347	Providing and fixing in position U.P.V.C.(Unplasticized Poly Vinyl Chloride) having multi- chambered outer frame section (73 x 50)mm with an outer wall thickness of 2mm & steel reinforcement, multi-chambered slider frame (73x 60) mm with steel reinforcement, multi- chambered slider sash (46x 82) mm with steel reinforcement designed to give optimum strength, 5 mm thick toughened double glass with 12 mm spacer of good quality including alluminium track, Inter-locking profile, coextruded beadings, EPDM gaskets,silicon sealent,sliding handle, fixtures and fastenings (couplings, hinges) including with all required screws and nuts with all necessary U.P.V.C. sections as per the detailed drawing and as directed by Engineer-In-Charge etc. Complete. Ventilators. Ground Floor
348	1st Floor & above
349	Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil Not exceeding 150 mm in thickness.
350	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means
351	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift 1.5m to 3.0m ). By Mechanical Means
352	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(lift 3.0m to 4.5m ). By Mechanical Means
353	Disposing the excess excavated material Soil, Earth obtained from the items of excavation and disposing the same off the site and at dumping place approved by the governing authority including loading, unloading and all leads and lifts complete.
354	Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent ofclorophyrifosper square metre of surface area covering ten years guarantee on bond paper.
355	Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent ofaldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper.
356	Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. Complete.
357	Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. Complete.
358	Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.
359	Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. Number : As directed by Engineer-in-charge. Ground Floor
360	Providing and laying Cast in situ/Ready Mixcement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will Not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
361	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/quartzite/gneissmetalforR.C.C.workinfoundationslike raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork,coverblocks,laying/pumping,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
362	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite /quartzite/gneissmetalforR.C.C.columnsasperdetaileddesignsanddrawingsoras directedincludingsteelcentering,formwork,coverblocks,laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smoothand even surface or roughening if special finish is to be providedand curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
363	ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcementandstructuralsteel).withfullyautomaticmicroprocessorbasedPLCwith SCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
364	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
365	Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, caNopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Ground Floor.
366	Providing fly ash brick masonry with conventional / I.S. type fly ash bricksin C.M. 1:6 in foundation and plinth includingbailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.
367	Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) – 1972). Ground Floor
368	Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. Ground Floor
369	Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Ground Floor
370	Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for Not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Ground Floor
371	Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. Ground Floor
372	Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. Ground Floor
373	Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. Ground Floor
374	Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Rubyred / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. Ground Floor
375	Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade withfullmoulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaningetc. complete. Ground Floor
376	Providing and laying telephone black / Amba White / Cadbury brown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler Noing/moulding the sharp edges wherever necessary, curing,etc. complete. Ground Floor
377	Providing andapplyingimpression 24 carrat Luxury paint of approved make &approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surfaceintwocoats,includingsubsurfaceprparationbyAcrylicputtyandAcrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC). Ground Floor
378	Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. Complete. Ground Floor
379	Providing and fixing solid core flush door shutter in double leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium platedfixturesandfastenings,withbrassmortiselock,chromiumplatedhandlesonboth sides, and finishing with French Polish etc. Complete. Ground Floor
380	Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts, etc. of the required size on the top of the floor of the side of waiste slab with suitable arrangement as per approval of engineer in charge (for payment purpose, only the weight of the stainless steel members shall be considered excluding fixing accessories such as nut bolts, fasteners etc.). 50mm dia. pipe, 1.5mm thickness and weight 1.92Kilogram/ r. Metre. Ground Floor
381	Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and iNorganic gases(Nox, VOC?s, CO, Sox, for maldehydes, etc.) in presence of natural or artificial light. It contains Graphene and naNoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company techNologist. Ground Floor
382	Providing and laying Terracotta tile of minimum thickness 10mm having size 300 mm. x 75 mm. confirming to corresponding I.S.for dadoin required position with readymade adhesive mortar of approved qualityincluding joint filling with white/ colour cement slurry cleaning curing etc. complete. Ground Floor
383	Prviding & Fixing GRC 25mm Jali as per deign & details etc completed. Ground Floor
384	Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil Not exceeding 150 mm in thickness.
385	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means
386	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift 1.5m to 3.0m ). By Mechanical Means
387	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(lift 3.0m to 4.5m ). By Mechanical Means
388	Disposing the excess excavated material Murum, Earth obtained from the items of excavation and disposing the same off the site and at dumping place approved by the governing authority including loading, unloading and all leads and lifts complete.
389	Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent ofclorophyrifosper square metre of surface area covering ten years guarantee on bond paper.
390	Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent ofaldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper.
391	Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. Complete.
392	Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. Complete.
393	Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.
394	Providing and laying Cast in situ/Ready Mixcement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will Not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
395	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/quartzite/gneissmetalforR.C.C.workinfoundationslike raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork,coverblocks,laying/pumping,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
396	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite /quartzite/gneissmetalforR.C.C.columnsasperdetaileddesignsanddrawingsoras directedincludingsteelcentering,formwork,coverblocks,laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smoothand even surface or roughening if special finish is to be providedand curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
397	ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcementandstructuralsteel).withfullyautomaticmicroprocessorbasedPLCwith SCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
398	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
399	Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
400	Providing and laying Cast in situ/ReadyMix cement concrete inM-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, coverblocks, laying/pumping, compactingand roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).withfully automaticmicro processor based PLC with SCADAenabled reversibleDrumTypemixer/ concreteBatchmix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
401	Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
402	Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, caNopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Ground Floor.
403	Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) – 1972). Ground Floor
404	Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. Ground Floor
405	Providing and laying cement concrete flooring 50mm thick with M20 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/ square etc. finishing smooth (with extra cement) in any colour as directed and curing etc. complete.with Crushed sand VSI Grade. Ground Floor
406	Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Ground Floor
407	Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for Not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Ground Floor
408	Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 with fine cement finish 1.5 mm thick without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. Complete. Ground Floor
409	Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. Ground Floor
410	Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. Ground Floor
411	Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. Ground Floor
412	Providing and laying telephone black / Amba White / Cadbury brown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler Noing/moulding the sharp edges wherever necessary, curing,etc. complete. Ground Floor
413	Providing andapplying twocoatsofHighAlbedopainthavingminimum SolarReflective Index (SRI) 108 (with solar reflectance & thermal emittance tested as per ASTM). Ground Floor
414	Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. Ground Floor
415	Providing and applying one coat of seal cement primer of approved manufacture and shed including scaffolding preparing the surface by cleaning dirt and other foreign matters, scrapping if necessary including scaffolding etc. complete. Ground Floor
416	Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness Not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet Not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear). Ground Floor
417	Providing High performance SGU (SHGC- 0.5, VLT-50%) for (as per 1868/1982) For UPVC Sliding windows of Three track as per detail drawings and as directed ny Engineer in Charge. Ground Floor
418	Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. Ground Floor
419	Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plProviding and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts completeates etc. Ground Floor
420	Providing and fixing mild steel grill work for windows, ventilators, etc. 20 Kilogram/Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. Ground Floor
421	Providing and fixing factory made door/Window frames of required colour made with wood Polymer composite (WPC) extuded internal ribbed sections conforming to American Society for testing and materials (ASTM) in regard with density, tensile strength, flexural strength, Izod impact, water absorption and screw withdrawal strength with wall thickness of 5mm (+/1mm) and with frames having mitred joints at each corner, joined together by two No. of 10 x 8 mm & 40 mm long PVC dovetail keys including hard wood piece support along the full vertical and horizontal length in rebate portion hole for fixing hinges and fixtures and the frames fixed to Walls/columns with 15 mm long dash fasteners/holdfasts (dash fasteners/holdfasts to be paid separately) etc. complete as per the direction of Engineer in charge,with prior approval of concerned Superitending Engineer. 1.3 For Profile size of 125 x 50 mm with 38 x 12 mm rebate. Ground Floor
422	Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and iNorganic gases(Nox, VOC?s, CO, Sox, for maldehydes, etc.) in presence of natural or artificial light. It contains Graphene and naNoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company techNologist. Ground Floor
423	Providing and fixing in position U.P.V.C.(Unplasticized Poly Vinyl Chloride) having multi- chambered outer frame section (73 x 50)mm with an outer wall thickness of 2mm & steel reinforcement, multi-chambered slider frame (73x 60) mm with steel reinforcement, multi- chambered slider sash (46x 82) mm with steel reinforcement designed to give optimum strength, 5 mm thick toughened double glass with 12 mm spacer of good quality including alluminium track, Inter-locking profile, coextruded beadings, EPDM gaskets,silicon sealent,sliding handle, fixtures and fastenings (couplings, hinges) including with all required screws and nuts with all necessary U.P.V.C. sections as per the detailed drawing and as directed by Engineer-In-Charge etc. Complete. Three track Window. Ground Floor
424	Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil Not exceeding 150 mm in thickness.
425	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means
426	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift 1.5m to 3.0m ). By Mechanical Means
427	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(lift 3.0m to 4.5m ). By Mechanical Means
428	Disposing the excess excavated material Murum, Earth obtained from the items of excavation and disposing the same off the site and at dumping place approved by the governing authority including loading, unloading and all leads and lifts complete.
429	Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent ofclorophyrifosper square metre of surface area covering ten years guarantee on bond paper.
430	Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent ofaldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper.
431	Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. Complete.
432	Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. Complete.
433	Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.
434	Providing and laying Cast in situ/Ready Mixcement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will Not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
435	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/quartzite/gneissmetalforR.C.C.workinfoundationslike raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork,coverblocks,laying/pumping,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
436	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite /quartzite/gneissmetalforR.C.C.columnsasperdetaileddesignsanddrawingsoras directedincludingsteelcentering,formwork,coverblocks,laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smoothand even surface or roughening if special finish is to be providedand curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
437	ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcementandstructuralsteel).withfullyautomaticmicroprocessorbasedPLCwith SCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc. complete. With fine aggregate (Crushed sand VSI Grade)
438	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
439	Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
440	Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
441	Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, caNopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
442	Providing fly ash brick masonry with conventional / I.S. type fly ash bricksin C.M. 1:6 in foundation and plinth includingbailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.
443	Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)
444	Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in Half brick thick wall including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)
445	Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete.
446	Providing waterproofing in W.C. and bath including brick bat coba in all position including providingandlaying12mmbeddingincementmortor1:3onverginconcreteslabwith waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba ofrequired thickness in cm 1:5withwaterproofing compound1Kilogram/bag ofcement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years\" guarantee on requisite stamp paper including curing etc. Complete.
447	Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.
448	Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for Not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.
449	Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 with fine cement finish 1.5 mm thick without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. Complete.
450	Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.
451	Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete.
452	Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.
453	Providing and laying vitrified matt fininsh tileshaving size 590 mm to 605 mm x to 605 mm of8to10mmthicknessandconfirmingIS.15622-2006(GroupBla)ofapprovedmake, shadeandpatternforflooringinrequiredpositionlaidonabedof1:4cementmorar including neat cement float, filling joints, curing and cleaning etc. complete.
454	Providing and laying vitrified matt finish tileshaving size 590 mm to 605 mm x to 605 mm of8to10mmthicknessandconfirmingIS.15622-2006(GroupBla)ofapprovedmake, shadeandpatternfordadoandskirtinginrequiredpositionfixedin1:4cementmortar including neat cement float, filling joints, curing and cleaning etc. complete.
455	Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.
456	Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.
457	Providing andapplyingimpression 24 carrat Luxury paint of approved make &approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surfaceintwocoats,includingsubsurfaceprparationbyAcrylicputtyandAcrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC).
458	Providing andapplying twocoatsofHighAlbedopainthavingminimum SolarReflective Index (SRI) 108 (with solar reflectance & thermal emittance tested as per ASTM)
459	Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete.
460	Providing High performance SGU (SHGC- 0.5, VLT-50%) for (as per 1868/1982) For aluminium louvered windows / ventilator as per detail drawings and as directed ny Engineer in Charge.
461	Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plProviding and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts completeates etc.
462	Providing and fixing mild steel grill work for windows, ventilators, etc. 20 Kilogram/Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.
463	Providing and fixing 90 cm. x 60 cm. Granite plateengraving 10cm. height letter, figuresincluding painting the letters /figures with approved colour and shade complete.
464	Providing and fixing factory made door/Window frames of required colour made with wood Polymer composite (WPC) extuded internal ribbed sections conforming to American Society for testing and materials (ASTM) in regard with density, tensile strength, flexural strength, Izod impact, water absorption and screw withdrawal strength with wall thickness of 5mm (+/1mm) and with frames having mitred joints at each corner, joined together by two No. of 10 x 8 mm & 40 mm long PVC dovetail keys including hard wood piece support along the full vertical and horizontal length in rebate portion hole for fixing hinges and fixtures and the frames fixed to Walls/columns with 15 mm long dash fasteners/holdfasts (dash fasteners/holdfasts to be paid separately) etc. complete as per the direction of Engineer in charge,with prior approval of concerned Superitending Engineer. 1.3 For Profile size of 125 x 50 mm with 38 x 12 mm rebate
465	Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and iNorganic gases(Nox, VOC?s, CO, Sox, for maldehydes, etc.) in presence of natural or artificial light. It contains Graphene and naNoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company techNologist.
466	Providing and fixing in position U.P.V.C.(Unplasticized Poly Vinyl Chloride) having multi- chambered outer frame section (73 x 50)mm with an outer wall thickness of 2mm & steel reinforcement, multi-chambered slider frame (73x 60) mm with steel reinforcement, multi- chambered slider sash (46x 82) mm with steel reinforcement designed to give optimum strength, 5 mm thick toughened double glass with 12 mm spacer of good quality including alluminium track, Inter-locking profile, coextruded beadings, EPDM gaskets,silicon sealent,sliding handle, fixtures and fastenings (couplings, hinges) including with all required screws and nuts with all necessary U.P.V.C. sections as per the detailed drawing and as directed by Engineer-In-Charge etc. Complete. Ventilators
467	Providing and fixing Hravy gauge Galvinsed Iron 50”Fan with autoopening 10shutters, Drop Hamper Exhaust Fan Systems with 6 No.SS Blades with low Noise , CFM:-25890, Auto opening shutters damper type 415V,50Hz, 1.5hp Motor, 3hp with fitting etc complete. Cellulose Cooling pad 1200mmx600mmx100mmT ONE PAD CONTAIN AREA OF 1 0 SQFT, Leading kit with Pipeline upto frame,- Bypass, filter flush system etc.6”Aluminum Frame for the above coolingpads with top water distribution and bottom gutter, Aluminum
468	Providing & Fixing Air Circulation Fans 7 blades SS aluminum powder coated of model GTACF-40-70, size of D320MMXH400, 50HZ , 1400 rpm, 220v, 120w, single phase, 70 ft airflow etccomplete.
469	AutomaticTemp Humidity controller- Providing & Fixing Microprocessor based Temp & Humidity controller Excluding moisture sensors, Electrical Control Panel for fan,Cooling pad, Pump, MCB, Contractor, OLR, Auto Manual switching ON/OF Fswitches IP55 cabinet, Electrical cable 1 .5Sqmm 4core for fans and pads,Sensor cable 4core 0.5square mm etc complete.
470	Providing & fixing controller - PLC & HMI based control, drip valves control -2 No,dosing valves control- 3No ( A-B,C-ACID), filling pump, system pump, air pump control, mixing valve control, phase missing prevention, over current prevention control, operation modes: auto -manual-bypass.
471	Providing & fixing DOSING UNIT includes dosing channels - 3No @400lph with flow indicatiors & regulators, dosing valves - 3 No (a-b,c-acid ), system pump - 30klph@35m head- ss 316 grade, dosing line filters-3No
472	Providing & Fixing Flow sensor of 3” as per design & drawing etc complete.
473	Providing & Fixing regenerative air blower-385cfm for 2 stocks mixing as per design & drawing etc complete.
474	Providing & Fixing SoleNoid valvesof 2” as per design & drawing etc complete.
475	Providing & Fixing Exhaust fans -1.5hp 3phase- 16 No4 controls ( each control 4 fans) pad pump - 3hp, 3phase- 1No fogging pump-5hp- 1No ACF- 0.5hp- 1phase- 32No - 1 control (3 phase load distribution) temperature sensor - 1No etc complete.
476	Providing & Fixing pressure release valves of 2” as per design & drawing etc complete.
477	Providing & Fixing total Galvinsed Iron structure of column pipes, profile, Zig-Zag spring, locking, perlins, tie bar, cross, gutter purlin, Hockey , Hockey memeber, hockey runner, Nagarpatta, Galvinsed gutter sheet, L, F Brcackets, Clamps, bolts , Nuts, self drilling screw, spring, sliding pulley, Netring, curtain clamps, Door cup, handle, fiber door, hole pass. Above all incudes, complete structure- erection, Fixing etc complete.
478	Poviding & Fixingpoly film, 50% Shade net, 30% Side net with 6.5m center height,D rain out, Israel make Ginegar diffuse 200micron. Above all incudes, making foundation, completestructure- erection, Fixing etc complete.
479	Providing & Fixing High-tech irrigation system including Inline Drip lateral, Inside main and sub main PVC pipes, Fogger system, Sand filter, Disc-filter, Ventury system with instillation & testing. 3024 Sqm etc complete.
480	Providing &FixingWeed control Mat 3000 SqmTR 120 GSM as per design & drawing etc completed.
481	Providing &FixingPlastic Trough20:50:20500 Micron 6000 Running Mtr etc complete.
482	Providing & supplying Low Electrical conductivity Coco-peat as instructed etc complete.
483	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means
484	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift 1.5m to 3.0m ). By Mechanical Means
485	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(lift 3.0m to 4.5m ). By Mechanical Means
486	Disposing the excess excavated material Murum, Earth obtained from the items of excavation and disposing the same off the site and at dumping place approved by the governing authority including loading, unloading and all leads and lifts complete.
487	Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent ofclorophyrifosper square metre of surface area covering ten years guarantee on bond paper.
488	Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent ofaldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper.
489	Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. Complete.
490	Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. Complete.
491	Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.
492	Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. Number : As directed by Engineer-in-charge
493	Providing and laying Cast in situ/Ready Mixcement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will Not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
494	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/quartzite/gneissmetalforR.C.C.workinfoundationslike raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork,coverblocks,laying/pumping,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
495	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite /quartzite/gneissmetalforR.C.C.columnsasperdetaileddesignsanddrawingsoras directedincludingsteelcentering,formwork,coverblocks,laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smoothand even surface or roughening if special finish is to be providedand curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
496	ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcementandstructuralsteel).withfullyautomaticmicroprocessorbasedPLCwith SCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc. complete. With fine aggregate (Crushed sand VSI Grade)
497	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
498	Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
499	Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
500	Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, caNopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
501	Providing fly ash brick masonry with conventional / I.S. type fly ash bricksin C.M. 1:6 in foundation and plinth includingbailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.
502	Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)
503	Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete.
504	Providing waterproofing in W.C. and bath including brick bat coba in all position including providingandlaying12mmbeddingincementmortor1:3onverginconcreteslabwith waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba ofrequired thickness in cm 1:5withwaterproofing compound1Kilogram/bag ofcement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years\" guarantee on requisite stamp paper including curing etc. Complete.
505	Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.
506	Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for Not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.
507	Providing 12mm internal plaster including fine cement finish 1.5 mm thick with scaffolding curing etc. complete.
508	Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.
509	Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc. Complete.
510	Providing andapplying Twocoats ofwall care Putty onplastered surface andCeiling and Walls to prepare surface even and smooth of approved make, etc complete.
511	Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.
512	Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.
513	Providing and laying telephone black / Amba White / Cadbury brown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler Noing/moulding the sharp edges wherever necessary, curing,etc. complete.
514	Providing andapplying twocoatsofHighAlbedopainthavingminimum SolarReflective Index (SRI) 108 (with solar reflectance & thermal emittance tested as per ASTM)
515	Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete
516	Providing and applying one coat of seal cement primer of approved manufacture and shed including scaffolding preparing the surface by cleaning dirt and other foreign matters, scrapping if necessary including scaffolding etc. complete.
517	Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.
518	Providing High performance SGU (SHGC- 0.5, VLT-50%) for (as per 1868/1982) For UPVC Sliding windows of Three track as per detail drawings and as directed ny Engineer in Charge.
519	Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete.
520	Providing High performance SGU (SHGC- 0.5, VLT-50%) for (as per 1868/1982) For aluminium louvered windows / ventilator as per detail drawings and as directed ny Engineer in Charge.
521	Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plProviding and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete etc
522	Providing and fixing mild steel grill work for windows, ventilators, etc. 20 Kilogram/Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.
523	Providingandfixing90cmx60cm Graniteplateengraving10cm.Height letter,figures including painting the lefters/figures with approved colour and shade complete
524	Providing and fixing factory made door/Window frames of required colour made with wood Polymer composite (WPC) extuded internal ribbed sections conforming to American Society for testing and materials (ASTM) in regard with density, tensile strength, flexural strength, Izod impact, water absorption and screw withdrawal strength with wall thickness of 5mm (+/1mm) and with frames having mitred joints at each corner, joined together by two No. of 10 x 8 mm & 40 mm long PVC dovetail keys including hard wood piece support along the full vertical and horizontal length in rebate portion hole for fixing hinges and fixtures and the frames fixed to Walls/columns with 15 mm long dash fasteners/holdfasts (dash fasteners/holdfasts to be paid separately) etc. complete as per the direction of Engineer in charge,with prior approval of concerned Superitending Engineer. 1.3 For Profile size of 125 x 50 mm with 38 x 12 mm rebate
525	Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and iNorganic gases(Nox, VOC?s, CO, Sox, for maldehydes, etc.) in presence of natural or artificial light. It contains Graphene and naNoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company techNologist.
526	Providing and fixing in position U.P.V.C.(Unplasticized Poly Vinyl Chloride) having multi- chambered outer frame section (73 x 50)mm with an outer wall thickness of 2mm & steel reinforcement, multi-chambered slider frame (73x 60) mm with steel reinforcement, multi- chambered slider sash (46x 82) mm with steel reinforcement designed to give optimum strength, 5 mm thick toughened double glass with 12 mm spacer of good quality including alluminium track, Inter-locking profile, coextruded beadings, EPDM gaskets,silicon sealent,sliding handle, fixtures and fastenings (couplings, hinges) including with all required screws and nuts with all necessary U.P.V.C. sections as per the detailed drawing and as directed by Engineer-In-Charge etc. Complete. Three track Window
527	Providing and fixing in position U.P.V.C.(Unplasticized Poly Vinyl Chloride) having multi- chambered outer frame section (73 x 50)mm with an outer wall thickness of 2mm & steel reinforcement, multi-chambered slider frame (73x 60) mm with steel reinforcement, multi- chambered slider sash (46x 82) mm with steel reinforcement designed to give optimum strength, 5 mm thick toughened double glass with 12 mm spacer of good quality including alluminium track, Inter-locking profile, coextruded beadings, EPDM gaskets,silicon sealent,sliding handle, fixtures and fastenings (couplings, hinges) including with all required screws and nuts with all necessary U.P.V.C. sections as per the detailed drawing and as directed by Engineer-In-Charge etc. Complete. Ventilators
528	Supply, fixing and installation of 4mm thick Aluminium Composite Panel (ACP) of approved colour for external cladding in combination of solid and metallic colours, including all necessary Framework, support and complete weather sealing as per architectural drawing. The Aluminium Composite Panel (ACP) should be made out of thermoplastic core of low-density polyethylene LDPE (100% virgin mix), sandwiched between two aluminium sheets of ALLOY GRADE- 5000 series, each Not less than 0.50 mm thick, total thickness of aluminium composite panels Not to be less than 4 mm, the exposed surface thereof shall have Stove lacquered finishing coat Not less than (26 + - 2) micron (containing minimum 70% kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface (facing the building exterior surface)shall have polyster based powder coating Not less than 25 Micron with protective peel-off foil on the exterior face (peel off film will in No case leave any adhesive mark over the composite panel surface after it is peeled off). The supporting framework shall be made out of 50 mm X25mm X 3mm thick Aluminium section to be spaced horizontally and vertically for fixing of panel of size 900 mm X 1200 mm and fixed to the building structure as per design through 50mm X50mm X5 mm MS angle clamps prefixed to masonry or slab, columns with Hilti make anchor fastener screws. The fixing of panel to be done with the help of VHB tapes and screws and all the sealing of joints to be done with weather sealent Silicon as directed by Engineer-in-charge. (Prior permission of S.E. is necessary before inclusion of this item in estimate)
529	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means
530	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift 1.5m to 3.0m ). By Mechanical Means
531	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(lift 3.0m to 4.5m ). By Mechanical Means
532	Disposing the excess excavated material Murum, Earth obtained from the items of excavation and disposing the same off the site and at dumping place approved by the governing authority including loading, unloading and all leads and lifts complete.
533	Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. Complete.
534	Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. Complete.
535	Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.
536	Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. Number : As directed by Engineer-in-charge.
537	Providing and laying Cast in situ/Ready Mixcement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will Not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
538	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/quartzite/gneissmetalforR.C.C.workinfoundationslike raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork,coverblocks,laying/pumping,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
539	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite /quartzite/gneissmetalforR.C.C.columnsasperdetaileddesignsanddrawingsoras directedincludingsteelcentering,formwork,coverblocks,laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smoothand even surface or roughening if special finish is to be providedand curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
540	ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcementandstructuralsteel).withfullyautomaticmicroprocessorbasedPLCwith SCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc. complete. With fine aggregate (Crushed sand VSI Grade)
541	Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
542	Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, caNopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
543	Providing fly ash brick masonry with conventional / I.S. type fly ash bricksin C.M. 1:6 in foundation and plinth includingbailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.
544	Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for Not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.
545	Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and iNorganic gases(Nox, VOC?s, CO, Sox, for maldehydes, etc.) in presence of natural or artificial light. It contains Graphene and naNoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company techNologist.
546	Providing expansion joints in R.C.C. framed structure (interior column) with plain premoulded filler 25 mm thick including fixing T.W. battens on both faces and finishing as directed etc. Complete.
547	Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil Not exceeding 150 mm in thickness.
548	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means
549	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift 1.5m to 3.0m ). By Mechanical Means
550	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(lift 3.0m to 4.5m ). By Mechanical Means
551	Disposing the excess excavated material Soil, Earth obtained from the items of excavation and disposing the same off the site and at dumping place approved by the governing authority including loading, unloading and all leads and lifts complete.
552	Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent ofclorophyrifosper square metre of surface area covering ten years guarantee on bond paper.
553	Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent ofaldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper.
554	Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. Complete.
555	Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. Complete.
556	Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.
557	Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. Number : As directed by Engineer-in-charge
558	Providing and laying Cast in situ/Ready Mixcement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will Not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
559	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/quartzite/gneissmetalforR.C.C.workinfoundationslike raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork,coverblocks,laying/pumping,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
560	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite /quartzite/gneissmetalforR.C.C.columnsasperdetaileddesignsanddrawingsoras directedincludingsteelcentering,formwork,coverblocks,laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smoothand even surface or roughening if special finish is to be providedand curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
561	ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcementandstructuralsteel).withfullyautomaticmicroprocessorbasedPLCwith SCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc. complete. With fine aggregate (Crushed sand VSI Grade)
562	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
563	Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, caNopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
564	Providing fly ash brick masonry with conventional / I.S. type fly ash bricksin C.M. 1:6 in foundation and plinth includingbailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.
565	Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)
566	Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for Not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.
567	Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and iNorganic gases(Nox, VOC?s, CO, Sox, for maldehydes, etc.) in presence of natural or artificial light. It contains Graphene and naNoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company techNologist.
568	Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of Nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with iNorganic pigment). The paint shall have a total coating thickness of Nominal 35 um, comprising of Nominal 25 um exterior coat on top surface and Nominal 10 um reverse coat on back surface. Profile sheet shall have Nom. 950- 1050 mm effective cover width and Nominal 25-30 mm deep ribs with subtle square fluting in the five pan at Nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre)
569	Cutting down trees including trunks and branches with girths above 30cm to 60cm and stacking the materials neatly with all lifts and lead of 1000m as directed and earth filling in the depression / pit if any.
570	Cutting down trees including trunks and branches with girths above 60cm to 90cm and stacking the materials neatly with all lifts and lead of 1000m. as directed and earth filling in the depression/pit if any.
571	Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil Not exceeding 150 mm in thickness.
572	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means
573	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift 1.5m to 3.0m ). By Mechanical Means
574	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(lift 3.0m to 4.5m ). By Mechanical Means
575	Disposing the excess excavated material Soil, Earth obtained from the items of excavation and disposing the same off the site and at dumping place approved by the governing authority including loading, unloading and all leads and lifts complete.
576	Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent ofclorophyrifosper square metre of surface area covering ten years guarantee on bond paper.
577	Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent ofaldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper.
578	Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. Complete.
579	Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. Complete.
580	Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.
581	Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. Number : As directed by Engineer-in-charge
582	Providing and laying Cast in situ/Ready Mixcement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will Not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
583	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/quartzite/gneissmetalforR.C.C.workinfoundationslike raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork,coverblocks,laying/pumping,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
584	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite /quartzite/gneissmetalforR.C.C.columnsasperdetaileddesignsanddrawingsoras directedincludingsteelcentering,formwork,coverblocks,laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smoothand even surface or roughening if special finish is to be providedand curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
585	ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcementandstructuralsteel).withfullyautomaticmicroprocessorbasedPLCwith SCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc. complete. With fine aggregate (Crushed sand VSI Grade)
586	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
587	Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
588	Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, caNopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
589	Providing fly ash brick masonry with conventional / I.S. type fly ash bricksin C.M. 1:6 in foundation and plinth includingbailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.
590	Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)
591	Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.
592	Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for Not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.
593	Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.
594	Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc. Complete.
595	Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness Not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet Not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear)
596	Providing High performance SGU (SHGC- 0.5, VLT-50%) for (as per 1868/1982) For UPVC Sliding windows of Three track as per detail drawings and as directed ny Engineer in Charge.
597	Providing and fixing 90 cm. x 60 cm. Granite plateengraving 10cm. height letter, figuresincluding painting the letters /figures with approved colour and shade complete.
598	Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and iNorganic gases(Nox, VOC?s, CO, Sox, for maldehydes, etc.) in presence of natural or artificial light. It contains Graphene and naNoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company techNologist.
599	Providing and fixing in position U.P.V.C.(Unplasticized Poly Vinyl Chloride) having multi- chambered outer frame section (73 x 50)mm with an outer wall thickness of 2mm & steel reinforcement, multi-chambered slider frame (73x 60) mm with steel reinforcement, multi- chambered slider sash (46x 82) mm with steel reinforcement designed to give optimum strength, 5 mm thick toughened double glass with 12 mm spacer of good quality including alluminium track, Inter-locking profile, coextruded beadings, EPDM gaskets,silicon sealent,sliding handle, fixtures and fastenings (couplings, hinges) including with all required screws and nuts with all necessary U.P.V.C. sections as per the detailed drawing and as directed by Engineer-In-Charge etc. Complete. Three track Window
600	Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete
601	Supply & Fixing of PPGI sheets of 0.5 mm thick as shown in drawing or as directed by engineer inchuge with all necessary accessories. (Ensar) Make)
602	Supply & Fixing of 0.5 num the PPGL roof accessories as per drawing or as directed by engineer in charge. (Mecanical SSR 2022-23)
603	Supplying, fabricating and erecting in position PPGI Eaves Gutter of required size with stop ends, all fixing accessories, drop ends, etc., at all elevations levels & heights including aligning, leveling, providing and fixing bolts, nuts, washers etc., conforming to latest specification including straightening, cutting, welding, bending to shape, bolting etc, complete and as directed as per engineer incharge.
604	Providing and fixing of the rain water down take pipes of PPGI, the sectional area of rain water down take pipes provided shall be generally at the rate of 1 square cm per 70 to 80 square decimetre of roof area drained. No spout shall be less than 80 mm in diameter. The spacing of spouts shall be arranged to suit the position of openings in the wall including necessary accessories for fixing the pipe and including all materials and labour chargos etc., complete as shown in drawings, as per specifications and as directed by the Engineer-in-Charge.
605	Supply & Fixing of turbo ventilator with 610 mm throat, having base ring & top plate in stainless steel of 0.8 mm thick, rotated using twin bearings of SKF-600122 & 600322 permanently lubricated & sealed. Fixed in FRP base plate of 2mm thk clear 1.020 mtr wide & 1.7 mtr long.
606	Supply & Fixing of 2mm the polycarbonate sheets as per drawing & as directed by engineer in-charge.
607	Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge Spec. No. MORTH 801.SSR I.No.6.36, Sr.No.284 P.No.60
608	Cutting down trees including trunks and branches with girths above 30cm to 60cm and stacking the materials neatly with all lifts and lead of 1000m as directed and earth filling in the depression / pit if any.
609	Cutting down trees including trunks and branches with girths above 60cm to 90cm and stacking the materials neatly with all lifts and lead of 1000m. as directed and earth filling in the depression/pit if any.
610	Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil Not exceeding 150 mm in thickness.
611	Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)
612	Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 5.0 to 9.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)
613	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means
614	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift 1.5m to 3.0m ). By Mechanical Means
615	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(lift 3.0m to 4.5m ). By Mechanical Means
616	Disposing the excess excavated material Soil, Earth obtained from the items of excavation and disposing the same off the site and at dumping place approved by the governing authority including loading, unloading and all leads and lifts complete.
617	Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent ofclorophyrifosper square metre of surface area covering ten years guarantee on bond paper.
618	Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent ofaldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper.
619	Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. Complete.
620	Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. Complete.
621	Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.
622	Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. Number : As directed by Engineer-in-charge. 1st Floor
623	Mezzanine Floor & Above
624	Providing and laying Cast in situ/Ready Mixcement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will Not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
625	Providing and laying cast in situ / ready mix M30 RCC for 600mm diameter bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement, compaction of concrete and withdrawal of steel shell with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely washed etc )
626	Providing and laying cast in situ / ready mix M30 RCC for 500 mm diameter bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement, compaction of concrete and withdrawal of steel shell with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete with fine agreegates of required specifications ( VSI sand finely washed etc )
627	Providing and laying cast in situ / ready mix M30 RCC for 600mm diameter bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement, compaction of concrete and withdrawal of steel shell with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely washed etc )Add 30% extra for depth 5 to 10 m
628	Providing and laying cast in situ / ready mix M30 RCC for 500 mm diameter bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement, compaction of concrete and withdrawal of steel shell with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete with fine agreegates of required specifications ( VSI sand finely washed etc ) Add 30% extra for depth 5 to 10 m
629	Providing and laying cast in situ / ready mix M30 RCC for 600mm diameter bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement, compaction of concrete and withdrawal of steel shell with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely washed etc )Add 40% extra for depth 10 to 15 m
630	Providing and laying cast in situ / ready mix M30 RCC for 500 mm diameter bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement, compaction of concrete and withdrawal of steel shell with fully automatic micro processor based PLCwith SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete with fine agreegates of required specifications ( VSI sand finely washed etc ) Add 40% extra for depth 10 to 15 m
631	Providing and laying cast in situ / ready mix M30 RCC for 600mm diameter bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement, compaction of concrete and withdrawal of steel shell with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely washed etc )Add 60% extra for depth 15 to 20 m
632	Providing and laying cast in situ / ready mix M30 RCC for 500 mm diameter bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement, compaction of concrete and withdrawal of steel shell with fully automatic micro processor based PLCwith SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete with fine agreegates of required specifications ( VSI sand finely washed etc ) Add 60% extra for depth 15 to 20 m
633	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/quartzite/gneissmetalforR.C.C.workinfoundationslike raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork,coverblocks,laying/pumping,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
634	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite /quartzite/gneissmetalforR.C.C.columnsasperdetaileddesignsanddrawingsoras directedincludingsteelcentering,formwork,coverblocks,laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smoothand even surface or roughening if special finish is to be providedand curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
635	1st Floor
636	Mezzanine Floor & Above
637	ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcementandstructuralsteel).withfullyautomaticmicroprocessorbasedPLCwith SCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
638	1st Floor
639	Mezzanine Floor & Above
640	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-40oftrap/granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or asdirectedincludingsteelcentering,formwork,coverblocks,laying/pumping, compactionandrougheningthesurfaceifspecialfinishistobeprovidedandcuringetc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). 1st Floor & above
641	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
642	1st Floor
643	Mezzanine Floor & Above
644	Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
645	1st Floor
646	Providing and laying Cast in situ/ReadyMix cement concrete inM-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, coverblocks, laying/pumping, compactingand roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).withfully automaticmicro processor based PLC with SCADAenabled reversibleDrumTypemixer/ concreteBatchmix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). Ground Floor
647	1st Floor
648	Mezzanine Floor & Above
649	ProvidingandlayingCastinsitu/ReadyMixcementconcretein M-25oftrap/quartzite/granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawingsorasdirectedincludingsteelcentering,plywood/steelformwork,steelprops, laying/pumping,compaction,finishing unevenandhoneycombedsurface withC.M.1:3of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversibleDrumType mixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate(Crushed sand VSI Grade). Ground Floor
650	1st Floor
651	Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). 1st Floor
652	Mezzanine Floor & Above
653	Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, caNopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Ground Floor
654	1st Floor
655	Mezzanine Floor & Above
656	Providing fly ash brick masonry with conventional / I.S. type fly ash bricksin C.M. 1:6 in foundation and plinth includingbailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.
657	Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) – 1972). Ground Floor
658	1st Floor
659	Mezzanine Floor & Above
660	Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. Making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. Complete. Mezzanine Floor & Above
661	Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. 1st Floor
662	Mezzanine Floor & Above
663	Providing waterproofing in W.C. and bath including brick bat coba in all position including providingandlaying12mmbeddingincementmortor1:3onverginconcreteslabwith waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba ofrequired thickness in cm 1:5withwaterproofing compound1Kilogram/bag ofcement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years\" guarantee on requisite stamp paper including curing etc. Complete. Ground Floor
664	1st Floor
665	Mezzanine Floor & Above
666	Providing and laying cement concrete flooring 50mm thick with M20 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/ square etc. finishing smooth (with extra cement) in any colour as directed and curing etc. complete.with Crushed sand VSI Grade. Ground Floor
667	1st Floor
668	Providing and fixing 20 to 25 mm thick rough shahabadbox type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete(RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35mm depth, filling the joints with 6mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete )
669	Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment To vertical outside faces of Reinforced Cement concrete walls of basement or underground Floor including filling the gap of 25 mm between rough shahabad and R.C.C.walls with Cement grout mixed with waterproofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping overtop most tile with cement mortar 1:3,butting the bottom most with Cement concrete1:2:4mixed with water Proofing liquid, curing, with 7years guarantee on court fee stamp of Rs.100/-with ponding testetccomplete.(excluding Cement concrete 1:3:6 base concrete). Ground Floor
670	Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Ground Floor
671	1st Floor
672	Mezzanine Floor & Above
673	Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for Not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Ground Floor
674	1st Floor
675	Mezzanine Floor & Above
676	Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 with fine cement finish 1.5 mm thick without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. Complete. Ground Floor
677	Mezzanine Floor & Above
678	Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. Ground Floor
679	1st Floor
680	Mezzanine Floor & Above
681	Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. Ground Floor
682	1st Floor
683	Mezzanine Floor & Above
684	ProvidingandapplyingTextureplasterwithfinishingwithtexturematerial ofapproved makein 3 to 4 millimeterthickness on previously plastered surface, including Plaster Groove 6mmthicknessorTapeGrooves35to45mmthicknessorasrequired,inallposition including preparing the surface, scaffolding etc. complete. Ground Floor
685	1st Floor
686	Mezzanine Floor & Above
687	Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. Ground Floor
688	1st Floor
689	Mezzanine Floor & Above
690	Providing and laying vitrified matt fininsh tileshaving size 590 mm to 605 mm x to 605 mm of8to10mmthicknessandconfirmingIS.15622-2006(GroupBla)ofapprovedmake, shadeandpatternforflooringinrequiredpositionlaidonabedof1:4cementmorar including neat cement float, filling joints, curing and cleaning etc. complete. Ground Floor
691	1st Floor
692	Mezzanine Floor & Above
693	Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Rubyred / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. Ground Floor
694	1st Floor
695	Mezzanine Floor & Above
696	Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade withfullmoulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaningetc. complete. Ground Floor
697	1st Floor
698	Mezzanine Floor & Above
699	Providing and laying vitrified mirror / glossy finish tiles decorative type having size 600mm x 1200 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints with epoxy grout, curing and clearing etc. Complete. Ground Floor
700	1st Floor
701	Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. Ground Floor
702	1st Floor
703	Mezzanine Floor & Above
704	Providing and laying telephone black / Amba White / Cadbury brown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler Noing/moulding the sharp edges wherever necessary, curing,etc. complete. Ground Floor
705	1st Floor
706	Mezzanine Floor & Above
707	Providing andapplyingimpression 24 carrat Luxury paint of approved make &approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surfaceintwocoats,includingsubsurfaceprparationbyAcrylicputtyandAcrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC). Ground Floor
708	1st Floor
709	Mezzanine Floor & Above
710	Providing andapplying twocoatsofHighAlbedopainthavingminimum SolarReflective Index (SRI) 108 (with solar reflectance & thermal emittance tested as per ASTM) C 1549 and ASTMC1371respectively,VOClessthan10cc/gm.Thecoatingthicknessandthe methodology of application shall strctly as per manufacturer\"s specifitions and as approved by engineer in charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc, washing with water all complete.The contractor shall give guarantee for the performanceofSRIandalsothedurabitityofcoating,allcompleteasperdirectionof Engineer - in- incharge. 1st Floor
711	Mezzanine Floor & Above
712	Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. Complete. Ground Floor
713	1st Floor
714	Mezzanine Floor & Above
715	Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. Ground Floor
716	1st Floor
717	Providing High performance SGU (SHGC- 0.5, VLT-50%) for (as per 1868/1982) For UPVC Sliding windows of Three track as per detail drawings and as directed ny Engineer in Charge. Ground Floor
718	1st Floor
719	Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. Ground Floor
720	Providing High performance SGU (SHGC- 0.5, VLT-50%) for (as per 1868/1982) For UPVCSliding windows of Three track as per detail drawings and as directed ny Engineer in Charge. Ground Floor
721	1st Floor
722	Mezzanine Floor & Above
723	Providing and fixing solid core flush door shutter in double leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium platedfixturesandfastenings,withbrassmortiselock,chromiumplatedhandlesonboth sides, and finishing with French Polish etc. Complete. Ground Floor
724	1st Floor
725	Mezzanine Floor & Above
726	Providing & Fixing in position Acoustical Doors along with 150 x 150 mm teak wood frame, doors made from 50mm Teak wood frame 600 x600 c to c filled with 1000 Gsm synthetic wool 50mm thick and 3mm Tecsound from both sides, 12mm waterproof ply & veneer from both sides , including 150mm heavy duty SS hinges (Geze / Dorma or eq.) 4 No each leaf, with Door-closer (Dorma / Geze or eq.) including cost of required CutOuts, decorative mouldings / finishing-items / melamine polish & Scaffolding as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc complete. Ground Floor
727	1st Floor
728	Mezzanine Floor & Above
729	Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts, etc. of the required size on the top of the floor of the side of waiste slab with suitable arrangement as per approval of engineer in charge (for payment purpose, only the weight of the stainless steel members shall be considered excluding fixing accessories such as nut bolts, fasteners etc.). 50mm dia. pipe, 1.5mm thickness and weight 1.92Kilogram/ r. metre. Ground Floor
730	1st Floor
731	Providing and fixing 40mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Gradeincludingfabricating,fixtures,errecting,necessarywelding,grinding, finishing, buffing to stainless steel pipe etc. complete. Ground Floor
732	Providing and fixing mild steel grill work for windows, ventilators, etc. 20 Kilogram/Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. Ground Floor
733	1st Floor
734	Mezzanine Floor & Above
735	Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m). Ground Floor
736	1st Floor
737	Providing and fixing 90 cm. x 60 cm. Granite plateengraving 10cm. height letter, figuresincluding painting the letters /figures with approved colour and shade complete. Ground Floor
738	Providing and laying in situ M-20 cement concrete of trap / granite / quartzite / gneiss metal with 15% plum of trap stones for foundation and bedding of retaining walls and jetty etc. including necessary formwork, compacting, curing, bailing out water manually in tidal range etc. Complete.
739	Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and iNorganic gases(Nox, VOC?s, CO, Sox, for maldehydes, etc.) in presence of natural or artificial light. It contains Graphene and naNoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company techNologist. Ground Floor
740	1st Floor
741	Mezzanine Floor & Above
742	Providing and laying Terracotta tile of minimum thickness 10mm having size 300 mm. x 75 mm. confirming to corresponding I.S.for dadoin required position with readymade adhesive mortar of approved qualityincluding joint filling with white/ colour cement slurry cleaning curing etc. complete. Ground Floor
743	1st Floor
744	Mezzanine Floor & Above
745	Providing fixing Mangalore tile roofing with class AA tiles in cement mortar 1:4 on sloping slab including necessary scaffolding, curing, finishing, etc. Complete. Mezzanine Floor & Above
746	ProvidingandfixinginpositionGypsum boardfalseceilingwith12.5mm thickGypsum boards, screwed/fixedtotheunderstructureofsuspendedG.I.Gridconstructedand suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum centertocenterdistanceof600milimetreperimeterchannelandintermediatechannelsat maximumcentertocenterdistance1200milimetregalvanizedgridshouldbefixedto reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws.The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels.Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed inall respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. Ground Floor
747	1st Floor
748	Mezzanine Floor & Above
749	Providing & Supplying, Design, Fabrication, Installation, Testing, Protection & Handover of Aluminium Semi-Unitized glazing system comprises of aluminium mullion, transoms and aluminium sash and subframe to with stand the design Wind Pressure of 1.50 Kpa (The system must pass the proof test at 1.5 times designed wind pressure without any failure). The system shall be fixed to the RCC structure (structural support only) withscrews, brackets and anchor fasteners. All Mild steel brackets shall be Hot dip galvanized minimum 80 micronsAll aluminium extrudedsections shall be of 6063 T6. (SGHC Value-0.27 & VLT-40%). The System should be designed to resist wind pressure 1.50 KPA as per IS codes and also to accommodate the building movements. All screws shall be stainless steel of SS 304 grade. All Anchor, bolts, nuts and washers used shall be only stainless steel of 304 grade.
750	1st Floor
751	Mezzanine Floor & Above
752	Providing and fixing in position to the exact profile and prestressing the high tensile strands to specified ultimate strength, standard end anchorages, cable ducts, grouting ducts after prestressing and bearing plates with wedges as per detailed drawings including necessary plant and machinery for prestressing etc. Complete. 1st Floor & above
753	Providing and fixing in position U.P.V.C.(Unplasticized Poly Vinyl Chloride) having multi- chambered outer frame section (73 x 50)mm with an outer wall thickness of 2mm & steel reinforcement, multi-chambered slider frame (73x 60) mm with steel reinforcement, multi- chambered slider sash (46x 82) mm with steel reinforcement designed to give optimum strength, 5 mm thick toughened double glass with 12 mm spacer of good quality including alluminium track, Inter-locking profile, coextruded beadings, EPDM gaskets,silicon sealent,sliding handle, fixtures and fastenings (couplings, hinges) including with all required screws and nuts with all necessary U.P.V.C. sections as per the detailed drawing and as directed by Engineer-In-Charge etc. Complete. Three track Window. Ground Floor
754	1st Floor & above
755	Providing and fixing in position U.P.V.C.(Unplasticized Poly Vinyl Chloride) having multi- chambered outer frame section (73 x 50)mm with an outer wall thickness of 2mm & steel reinforcement, multi-chambered slider frame (73x 60) mm with steel reinforcement, multi- chambered slider sash (46x 82) mm with steel reinforcement designed to give optimum strength, 5 mm thick toughened double glass with 12 mm spacer of good quality including alluminium track, Inter-locking profile, coextruded beadings, EPDM gaskets,silicon sealent,sliding handle, fixtures and fastenings (couplings, hinges) including with all required screws and nuts with all necessary U.P.V.C. sections as per the detailed drawing and as directed by Engineer-In-Charge etc. Complete. Ventilators. Ground Floor
756	1st Floor & above
757	Mezzanine Floor & Above
758	Supply & Fixing of 60mm (core thickness) PUF roof panel with Pre-coated Galvanised steel lamination both side, off white ( RAL 9002). Mezzanine Floor & Above
759	Prviding & Fixing GRC 25mm Jali as per deign & details etc completed. Ground Floor
760	1st Floor & above
761	Mezzanine Floor & Above
762	Providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 mm thick stone black kadappa framework including chromium plated coupling bottle -Trap using CERA company or equivalent oval typa wash basin model No 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 m x 0.60 m ). Ground Floor
763	1st Floor & above
764	Mezzanine Floor & Above
765	Supply and installation of ZMS (Nylon) cubicles of width and depth as per specifications/site drawings. Cubicle height will be 2003 mm. ZMS Series Cubicles: Std Sizes (W x D xH): 900 mm x 1550 mm x 2003 mm, (Height is including 150 mm gap from bottom) DoorWidth- 600 mmITEM DESCRIPTION Made from solid grade compact high pressurelaminate as per IS:2046 and EN-438 manufactured under high specific pressure > 5 MPa and temperature >120°C. All doors will be of single colour and made of 12 mm thick HPLcompact panel. All pilasters will be made of 12 mm thick HPL compact panel. All intermediate partitions or dividers will be made of 12 mm thick HPL compact laminate panels. Size of panels to be as per drawing. HARDWARE & ACCESSORIES are Semispherical (Top) head frame structure for surface protection. Size to be 50x32x1.6T. Corner joinery section, Size to be 40x16.5x1.8T.U-Channel Wall joinery section, Size to be 22x16x1.6T.Door stopper section, Size to be 21x12.5x1.6T. Stainless steel grade 304 screws, Anti-rotation Nylon polyamide grade-6 expandable wall plugs, The Work shall complete as per drawing , under supervision of engineer in charge, etc complete. Ground Floor
766	1st Floor & above
767	Mezzanine Floor & Above
768	Treated Area: Hall Ceiling (60% AREA)Application: Ceiling Absorption NRC 0.85Providing& Fixing in position, Acoustical Ceiling made from Rigitone 8/18 perforated panels on approved heavy duty G.I. frame, ceiling channels at 300 c to c, & intermediate channels Not more than 1200 c to c, suspended with Hangers from Roof, in front of 1000 Gsmsyntheticwool50mmthick,withPaint,includingcostofrequiredCut-Outs, decorative mouldings / finishing-items & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishingetc complete.
769	Providing and Fixing Soft Fibre Acoustical Suspended Ceiling System with Optra (BevelledTegular) EdgeTiles of size 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC0.9-1.0, Light Reflectance ? 85%, Colour White ,Fire Performance UK Class 0 / Class1 (BS 476 pt-6 & 7) in module size of 600x600x15mm,suitable fo rGreen Building application,with Recycled content of 66% GW and 74% RW.The tile shall be laid on precoated G.I channel 32 with15 mm wide T section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200mm and 600mm CrossTees with a web height of 32mm and a load carrying capacity of 7 Kilograms/M2 with a minimum pull out strength of 100 Kilograms.The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system TheTile and Grid system used together should carrya 10 year warranty. products approved as per GRIHA and BS 476 etc. complete
770	Treated Area: Stage Ceiling (100% AREA)Application: Ceiling Absorption NRC 0.9METAL BAFFLE CEILING : Providing & fixingof horizontallevel suspendedceiling comprisingofVerticalLinearBaffleCeilingmadeoutofAluminumExtrusionin Aluminum alloy grade 6063 T5. The baffle blade shall be in size of 100x25x3600mm in powder coated to Woodgrain/Plain finish (Red Oak, Cherry, Black & White).. The baffle shall be electrostatically polyester powder coated to a coating thickness of 60-80 micron. The powder coating shall pass Salt Spray Test for 750 Hours as per ASTM B117, QUV –ATestfor1000hoursasperASTMG-154–(Cycle–1)andHumiditytestfor 1000hours as per DIN 50017. The powder coating shall have an adhesion of GT0 as per EN ISO 2409. The shade variation within a manufacturing batch shall be delta E<1 using Excite/BYKGardnerinstrumentandglosslevel25±5at60˚asperASTMD523(Not applicable of Wood GrainShade). Thebaffle bladeshall besuspended usingSlotted U- profileof20x30x3700mm(Thk-1.5mm)havingslotsinmoduleof25mmtokeep bafflesatanon-centerspacinginmultiplesof25mm.LongerlengthsofBaffletobe connected by Baffle Joiner and the ends to be fixed with End caps..SUSPENSION: Shall behangedusingbafflehangerfromU-profilemadeofmildsteelwithpowdercoating thickness of 60-80 micron. The U – profile to comprise of alternate square & rectangular slotsof 6.5x6.5mm & 28x6.5mm respectively onthe webfor lockingthe bafflehanger usingplugincliptosecurethehangerinperfectpositionandachieveuniformspacing between baffles. The overall dimension of the U – profile is 20(W) x 30(H) x 3750(L) mm andisrolledform from 1.5mm thickmildsteel withapowdercoatingthicknessof60- 80micron. U- Profile to be connected to each other using U –Profile Splice. The U- profile shall be hanged from the true ceiling using threaded rod using a U- Profile hanger. The Baffle along with suspension system used together shall carry a 10 year warranty against manufacturingdefectandmanufacturershall provideawarranty certificate.Thesupply shall be backed by a Manufacturing Test Certificate. INSTALLATION: InstallationofU-Grid:TheUprofiletobesuspendedatevery 1200mmcentertocenterusing6mmthreadedrodfromthestructuralsoffitusingU- profilehanger.U-profilesplicetobeusedtojoinmorethanoneUprofilesoflength 3.7M. 1st U-Grid Channel must be No more than 400mm from the perimeter. Installation ofBaffles: LocatetheslotforBaffle Hangersin UProfile sectionat 1200mm centers. Hangers are inserted into the slot, then rotated 90° and fixed into position by tightening the grub screw. Baffle tobe liftedinto positionand hangersengage overlip ofU-Grid Channel. Each Hanger to be secured into position by inserting the Locking Clip.When doingcontinuousinstallation,BafflesbladesaretobeconnectedatendswithBaffle Joiner,which areinserted intothe topand bottom slots ofthe Baffleclosed profilefor alignment only. The bottom Joiner to be located first and fastened on one side only. The top Joiner to be fitted then and secured with grub screws on one side. Then the two Baffle sections shall be joined and the top Joiner is screw fastened on the 2nd Baffle profile. End Capstobelocatedby pushingtheEndCaptonguesintoopenBaffle slots.Installation should be carried out as per Manufacturer recommended procedure.
771	Application: Wall Treatment upto 8ft Height ACOUSTICAL WALL PANELLING – FABRIC WRAPPED OF SIZE:600X600/1200X25MM Providing and Fixing of Acoustical Wall Panel with square edges made of fibre glass substrate 25mm thick, wrapped on the front side with an acoustically transparent fabric as per the approved shade (Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell). The panel shall be classified for Fire Class A, as per ASTM E- 84. The Acoustical Wall Panel shall be of sizes 600x600mm (Nominal) or 600x1200mm (Nominal) and shall achieve an NRC of 0.85 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) with 50mm airgap as per ASTM C423 to be fixed to wall on a framework of wooden battens and using Wall panel Impalers (supplied by the manufacturer) or by using construction adhesives (as per the instructions laid down by the manufacturer). The fibre glass substrate shall have a recycle content of 85%. Installation:An appropriate vapour barrier (by others) shall be applied/installed on the vertical surface before the installation to properly seal against entry of any moisture. Vapour barrier (by others) shall be installed as per Manufacturer’s recommendation. Install wooden batten grid (provided by others) of section 50x50mm or as approved by the Architect on the solid wall/partition to provide level and plumb surface. The Impalers shall be fixed to the battens using self-tapping screws, 3 No. in case of 600x600mm and 4 No. in case of 600x1200mm. Silica based construction adhesive (by others) to be dabbed on to the projecting elements (spikes) of the Impalers. Wall Panels shall be pierced through the spikes of the Impalers ensuring the line and level of the panels are maintained
772	Treated Area: Hall Wall Treatment above 8 ft ht. (60%)Application: Wall Absorption NRC 1CHANNELLED WALL PANELLING OF SIZE: 192X2400X15MMProviding and FixingChannelled perforated panels of width 192mm, thickness of 15mm and length 2400 mm, made of a Moisture resistant fibre board substrate with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut,InteriorWhite,AluminaPearl)andamelaminebalancinglayeronthereverse side. The boards shall have a special perforation pattern where the reverse surface has a “Helmholtz” fluted perforation with consecutive 3mm wide groove followed by 13mm or 21mmofvisiblepane(G-13/G-21).Theedgesofthepanelshallbe“tongue-and- grooved”tofixspecialclipsforinstallationandseamlessvisual.Thebackofthe perforatedpanelshallhavesoundabsorbingNon-wovenSoundtexacousticalfleecehot pressed to achieve NRC of 0.5. for G-21 and 0.6 for G-13. (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 andHumidityResistance(RH)of70%withcamberlimitlessthan1mm/1000mmand bowlessthan1mm/300mOneMetricTonnehepanelsshallbemountedonspecial aluminium splines (keel) using inside clips provided by Manufacturer and approved by the Architect/ Engineer-in-Charge. Installation:Anappropriatevapourbarrier(byothers)shallbeapplied/installedonthe verticalsurfacebeforetheinstallationtoproperlysealagainstentryofanymoisture. Vapourbarrier(byothers)shallbeinstalledasperManufacturer’srecommendation. Install wooden batten grid (provided by others) of section 50x50mm or as approved by the Architecton the solid wall/partitionto provide level and plumb surface for fixing Keel. Install Keel vertically using screws and plugs at spacing of Not more than 600mm centre- to-centre. The first and last keel should Not be more than 150mm from the ends. Trim the tongue of the first bottom panel and install using headless nail with groove side upward. Subsequent panels are installed with tongue side downward by engaging with each other usingtongueandgroovemechanismandsecuredby insideclip.Continuethisprocess until required height is achieved. Shorter butt edges need to be joined using industrial/wood glue. The keel shall also be used for transition of the butt end of adjacent panel at every 7.2m.Install the Skirting (provided by others) of width 50mm or more as requiredbytheArchitect/Engineer-in-Charge. Finishofftheedgesusingwooden mouldingofmatchingcolour(byothers).Installationshouldbecarriedoutasper Manufacturer recommended procedure.
773	Treated Area: Hall Wall Treatment above 8 ft ht. (40%)Application: Wall Absorption NRC 1METALOPENCELLCEILING:Providing&fixinghorizontallevelOpencell Aluminium lay-in ceiling tiles with border panels forming board edge of size 600x600x38mm(Nominal)havingcellsizeof100x100mmmadeofAA-3003-H14 (Tempered) grade Aluminium suitable for architectural finishesin 0.35mm thicknessas per in IS:2676 (1981) in Global white color. The tile shall be electrostatically polyester powder coated using RoHS compliant powder having coating thickness ranging from 60- 80 microns. The powder coating shall pass Salt Spray Test for 750 hours as per ASTM B117, QUV –A Test for 1000 hours as per ASTM G-154 – (Cycle – 1) and Humidity test for 1000 hours as per DIN 50017. The powder coating shall have an adhesion of GT0 as perENISO2409.Theshadevariation across batches shallbedeltaE<1using Excite/BYK Gardner instrument and gloss level of 25±5% at 60˚ as per ASTM D523. Tile shall have a Fire Performance class A as per GB 8624-2012. SUSPENSION: The tile shall be laid on 15 mm wide T - section flanges colour global white (matching to tile . colour) having double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm (all sections). The deflection loading of the system shall be 12.5 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 15kg/m. The end details of the cross tee shall be made of pre hardened steel clipfixedtotheendsofthecrossteetoprovidedoublelockingbetween“crossteeto crosstee” and “cross tee to main beam”. All main beam to main beam and cross tee to crosstee connection shall have a pull out strength of more than 100kg. The TSections shallbemadeofhotdippedgalvanizedsteel90gsmandpre-paintedsteelwithbaked polyester paint of 0Tbending capability. , TheTile & Grid system used togethershall carry a 10 year warranty againstmanufacturing defect and manufacturer shall provide a warranty certificate. The Tile & Grid shall have the manufacturers name embossed/printed on it. The supply shall be backed by a Manufacturing Test Certificate. INSTALLATION: To comprise main runner spaced at 1200mm securely fixed to the structural soffit using suspension system (specifications below) at 1200mm maximum. The First/Last suspension system at the end of each main runner shall Not be greater than 450mm from
774	Treated Area: Stage Wall Treatment above 8 ft ht.Application: Wall Absorption NRC 0.7CHANNELLED WALL PANELLING OF SIZE: 192X2400X15MMProviding and FixingChannelled perforated panels of width 192mm, thickness of 15mm and length 2400 mm, made of a Moisture resistant fibre board substrate with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut,InteriorWhite,AluminaPearl)andamelaminebalancinglayeronthereverse side. The boards shall have a special perforation pattern where the reverse surface has a “Helmholtz” fluted perforation with consecutive 3mm wide groove followed by 13mm or 21mmofvisiblepane(G-13/G-21).Theedgesofthepanelshallbe“tongue-and- grooved”tofixspecialclipsforinstallationandseamlessvisual.Thebackofthe perforatedpanelshallhavesoundabsorbingNon-wovenSoundtexacousticalfleecehot pressed to achieve NRC of 0.5. for G-21 and 0.6 for G-13. (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 andHumidityResistance(RH)of70%withcamberlimitlessthan1mm/1000mmand bowlessthan1mm/300mOneMetricTonnehepanelsshallbemountedonspecial aluminium splines (keel) using inside clips provided by Manufacturer and approved by the Architect/ Engineer-in-Charge.
775	Application : Hall Floor Carpet Providing & Fixing in position, Carpetmore than 800+ gsm, made with100% stain proof fibresofapprovedmakealongwith5mmunderlayasperArchitectural&Acoustical Design & Instructions & Complete in all aspectsincluding all materials labour,finishing etc complete.
776	Application: Door grade AProviding& Fixing in position Acoustical Doors alongwith 150x 150mm teakwood frame, doors made from 50mm Teak wood frame 600 x600 c to c filled with 1000 Gsm synthetic wool 50mm thick and 3mm Tecsound from both sides, 12mm waterproof ply & veneer from both sides , including 150mm heavy duty SS hinges (Geze / Dorma or eq.)4 Noeachleaf, withDoor-closer(Dorma/Gezeoreq.) includingcostofrequiredCut- Outs,decorativemouldings/finishing-items/melaminepolish&Scaffoldingasper Architectural & Acoustical Design & Instructions & Complete in all aspects .including all materials labour,finishing etc complete.
777	Application: Teak Wooden Flooring Application: Stage Flooring.Providing & fixing in position Stage flooring Made from 18mm plywood 1200 x 2400 & 18mm Teakwood planks 100 x 800 having tongue & grove on Sal-wood frame of 50 x 100at600mmctoconstagesurfaceincludingcostofrequiredCut-Outs,decorative mouldings/finishing-items/polishetc.,asperArchitectural&AcousticalDesign& Instructions&Completeinallaspects. .includingallmaterialslabour,finishingetccomplete.
778	Providing and fixing BIFMA Certified Wipro/Godrej/ Eqivalent Make Auditorium Chair ( Box office - Ballet Model), BOX-OFFICE BALLET is a Push Back/fixed chair(fluimatic slider mechanism). STRUCTURE:- Frame :Back Rest frame of ERW Tube/IS:3074-2005 GRADE 1-16 dia Round Pipe 1.2mm Thickness & Extra Reinforcement 16 dia round pipe 1.2 mm. Cushion Frame (Seat) ERW Tube/IS:3074-2005 GRADE 1-22 dia Round Pipe 1.63mm Thickness WING COMPONENTS:-a) Wing frame Rectangular Frame. Side wing frame with plywood. with upholstery. b) Leg: sq TUBE IS:4923-1997-25X25 mm, 1.63 Thickness SPRINGS:-Seat: For Auto Tip-up-Torsion Spring/Spring Steel IS: 4454 1981 GRADE 3 (part 1) Tested for 5,00,000 cycles. For Push Back mechanism - Coil Spring/Spring Steel IS: 4454 1981 GRADE 2 Tested for 1,00,000 Cycles. FOAM:- Automotive Grade High Resilence-HR Polyurathene foam, Density: 50+5 Kg/M3 / JIS K 6401, Constant Compression Set: (Max. 13% ) JIS K 6401. BACK AND CUSHION HOUSING:- PPCP IS: 10915 1994./ Injection Molded/Thermoform Plastic. FINISH:- Seat Cushlons Dimensions are in-line with Anthropometric Datas & ErgoNomically profiled Contours. BACKHEIGHT:- Height of top of the back from ground level 1030 +/-15mm. EFFECTIVE SEAT DEPTH:- Seat Cushions Dimensions are in-line with Anthropometric Datas & ErgoNomically profiled Contours. Seat depth is 448mm.Height from ground level is 445+/-10mm. TYPE OF BACKREST:- Option 1 Slider (Fluimatic mechanism)-60mm travels.with metal ball and roller cage which results in PUSH BACK OF 140+ 10mm. Should have flexibility to restrict movement of the pushback and slider as per avialability of aisle space. Option 2 Fixed Back chair ARMREST
779	PRIVIDING AND FIXING MODULAR ACOUCTICAL WOODEN WALL PANELLING:Of Nominal width 100 / 150mm, having 80mm wide panel with 20mm reveal having a thickness of1 5mm thickness and length 2400mm.The panel shall be made of a Moisture resistant fibre board substrate having a minimum density of595Kg/m3 with a laminated facing as per the approved shade (Portland ,aple,Sea Beech,Siam Wood & Mystique Walnut) and a melamine balancing layer on the reverse side.The panel shall have 0.7mm PVC edge band in along the length side with a similar finish as that of the face. The back of the panel shall have a black acoustic felt to cover the reveal of20mm to attainan NRC of 0.4 for 150mm. /0.5 for 100mm.module (Average value of Absorption Co-efficient readings taken at 250Hz, 500Hz, 1000Hz and 2000Hz)as ASTMC 423. The panels shall provide a Humidity Resistance (RH) of 70% with camber limit less than1mm/1000mm and bowless than1mm/300mm.The back ofthe panels shall be profile-grooved to receive 3600mm special main beam carrier with integrated factory fitted clips for installation.SUSPENSION: The panels shall be upward mounted on 24mm wide T-section flanges having rotary stitching along the length of the beam with a web height of 43mm.The Main Beam shall have integrated (factory fitted) locking clips installed at 100 / 150mm centre to centre distance.The deflection loading of the main beam tested as per ASTMC 635 (Deflection limit less than L/360)shall beat least 21.4kg/m.The end details of the main beam shall be made of prehardened steel and fixed to the ends with 3 point fixing. All main beam to main beam connection shall have a pull out strength of more than 100kg.The T Sections shall be made of hot dipped galvanized steel of 100 gs mas per IS277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability. Installation should be carried out as per Manufacturer recommended procedure. The grid shall be installed with suspension system of Manufacturer make.
780	Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacityabove 1000 to 20,000 litres
781	Providing & Fixing in position,1000 mm wide Auto-glow Aluminium extruded strips on auditorium steps as per Design & Instructions & Complete in all aspects.Make Piccolo or Nexus
782	Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil Not exceeding 150 mm in thickness.
783	Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)
784	Fixing chainage Stone /Bench mark Stone / Center Stone / Apex Stone in earth and all sorts of soil and soft murum including conveying excavated material, fixing stone, including paintaining lettering One Numbers and back filling etc. complete
785	Reconnaisance survey including study of sheets, maps etc. for alignment including 3 dimension of apexes, fixing pegs, chain and compass or cross staff survey with L-Section and cross section of alignment at every 30 m or at every change of deviation whichever is less including fly levels at closing of day, fixing apex and B.M. stones of size 0.200.200.75 m in 1:2:4 C.C. at every 200 m and preparation of alignment plans and all type of compliance if required from department.
786	Demarcation of right of way (ROW) as per design using total station including calculation of co-ordinates of 30 Meter interval on both sides of road.
787	Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.
788	Disposing the excess excavated material Murum, Earth obtained from the items of excavation and disposing the same off the site and at dumping place approved by the governing authority including loading, unloading and all leads and lifts complete.
789	Providing earth work in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. Thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve Not less than 97 % of standard proctor density etc. complete ( Material obtained from Other sources)
790	Providing and laying Cast in situ/Ready Mixcement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will Not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
791	Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader/ paver on prepared surface, mixing by mix in place method with rotavator at OMC, and Compacting with vibratory roller to achieve the desired density, complete as per clause 401 – By Mix in place method and Grading – II Material
792	Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate Not exceeding 25 mm, , cement content Not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength Not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in charge , compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etc. complete. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. Complete.
793	Providing and laying in-situM30 Grade unreinforced plain cement concretepavementwith max 20% fly Ash ( Fly-ash upto 20% by weight of Cement) over a prepared sub base with 43 grade cement , coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradationas per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ Non tilting mixer and Weigh batcheras per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and gradesas directed by Engineer-in-charge and curingby curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top withdepth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge.
794	Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge.
795	Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 mOne Metric Tonneo 4 mm. Joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor and allowing joint to become thoroughly dry before sealent is applied and applying primer.(A) Contraction and longitudinal joints (15 mm. deep x 8 mm.wide)
796	Providing and fixing in position TMT FE 500, 25mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 60 cms. Long and at 30.00 cm. C/C and wherever directed including handling, straightening, necessary cutting supported by TMT FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bitumiNous paint as directed etc. complete.
797	Providing and fixing in position TMT FE 500, tie bars precoated with anticorrosive epoxy paint of 12 mm dia. 70 cms.long and at 30.00 cm. C/C and wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening , supported by assembly of TMT FE 500, chairs with proper alignment etc. complete.
798	Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb without gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant
799	Providing and laying in place 300mm x 300mm x 16mm cement tactile directional and warning tiles (for a person with visual impairment)of the approved brand and make and specified colour for outdoor floors such as footpath, courtyard, multimodals location etc. laid on 20mm thick base of cement mortar 1:4 (1 cement: 4 coarse sand) in all shapes and patterns including grouting the joints with white cement with matching pigments etc. complete as per direction of engineer in charge
800	Providing and laying chequered tiles of approved quality of size 30 cm x 30 cm, confirming to corresponding I.S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. Complete.
801	Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 80 mm thickness of having a strength of 400 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. (using 100% crushed sand)
802	Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat\"s Eyemade of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000Kilogramtested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97DO III Dt 11.06. 1997. The height, width and length shall Not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter Not less than 19 +/- 2 mm and height Not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kilogram. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer\"s recommendation and complete as directed by the engineer.The contractor shall submit a two year warrantyfor satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer.
803	Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on BitumiNous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per Square Metre area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.complete.
804	Providing and fixing steel pipe delineators of 10 cm. in diameter and total height of 130 cm, provided with 2 strips of white retroreflective sheeting of size 5 cm. x 32.5 cm. each fixed horizontally and 2 strips of red retroreflective sheeting each having size 5 cm. x 32.5 cm. fixed horizontally at top, with M.S. round cap having diameter 11 cm. and wire mesh at top (10 guage thick) and height of wire mesh 15 cm, M.S. hold fast 6 mm thick with 35 cm. in length, fixing the delineators in C.C. 1:4:8 concrete block of size 25 cm. x 25 cm. x 45 cm. with necessary excavation etc. Complete.
805	Fixing in position Cautionary/ Mandatory sign boards in ground with C C 1:4:8 block of 60cm x 60cm x 75cm size etc. complete as directed including all leads
806	Fixing in position Road Junction/ Informatory Sign Board in ground with C.C.1:4:8 block of 60cm x 60cm x 75cm size including all leads complete.
807	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
808	ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-25 oftrap/granite/ quartzite/gneissmetalforR.C.C.pardiofrequiredthicknessincludingsteelcentering, formwork, cover blocks, laying/pumping,compacting and roughening them if special finish istobeprovidedandcuringcomplete.(Excludingreinforcementandstructuralsteel).with fullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversibleDrumType mixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate(Crushed sand VSI Grade)
809	Providing 12mm internal plaster including fine cement finish 1.5 mm thick with scaffolding curing etc. complete.
810	GARDEN SOIL:-Supplying on site garden soil well sieved 80 % to pass through I.S. sieve of 10 mm size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry. The color of the soil generally is red. The soil will be measured by measuring box. (Farma) Item includes Transporting, loading -unloading etc .(Lead charges per 15 km. considered Excluding royalty.)
811	FARM YARD MANURE:-Supplying on site well decayed, well dried, well powdered, without clods and free from stones, dried grass and other rubbish material. The color of the manure generally is black. The manure will be measured by measuring box.(Farma) Item includes Transporting, loading -unloading etc. (Lead charges per 10 km. considered.)
812	Filling fresh garden soil /silt & manure in excavated area including lead up to a distance of 50 Mtrs (Rates Form PWD SSR 2022-23 / Sr. No. -104 Item No-2.30Page No.-25 )
813	Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting required plant species; lawn grass as directed etc. complete. (1/10 of unskilled labour i.e 648/10Including (Overhead Charges 10% & Contractor Profit 10% ) ( Labour Rates For PWD SSR 2022-23 / Sr. No. 62 Page No.-545 )
814	Planting large flowering/Shady trees:- (Minimum Height to 2 Mtr. Per No)Digging pit with size 0.9 m × 0.9 m × 0.9 m Removing & conveying unwanted stuff to a required distance as directed.
815	Providing on site required variety of lawn (free from weeds /diesease etc.) Cynadon/ paspalum/ selection for 1 Sqm. area dibbling distance 5 cms.apart c/c.
816	Providing on site required Palm should be well Developed, Good Branching, healthy Condition, appropriat Size in Polybag, undamaged. BAg Size:15\" x 16\",Height 5 to 7 ft NAme: Supari. Serial No 11 (c) 1
817	Providing on site required Palm should be welll Developed,G ood Branching , healthy Condition, appropriat Size in Polybag, undamaged. BAg Size:18\" x 18\", Height 5 to 6 ft, NAme: Raphis palm. Serial No 11 (d) 5
818	Excavation for foundation by mechanical means in earth, soils of all types, sand, gravel, soft murum including shoring and strutting as necessary and disposing off excavated stuff as directedetc. complete.
819	Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 5.0 to 9.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)
820	Providing and filling sand in foundation trenches/ below Raft as per drawing and technical specifications etc. complete. (Coarse Sand and Gravel )
821	Back filling behind abutment, wing wall and return wall as per drawings and technical specifications etc. complete. (by granular material)
822	Providingand laying 0.90 meter thick metal mat consisting of rubble, oversize metal and Normal size metal in specified thickness as per detailed drawing including supplying all materials, hand packing of rubble, spreading metal in layers and hard murum including watering and compaction with power roller etc. complete.
823	Providing and laying in situ / ready mix cement concrete of M15 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer)) with SCADA with Natural / VSI standard Artificial Sand)
824	Providing and laying in situ / ready mix M-25 controlled reinforced cement concrete of trap metal for raft slab including \"V\" haunches, formwork, scaffolding, compaction by vibrating, finishing curing etc. complete. concrete batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ) etc. complete.(excluding reinforcement). a) RCC Grade with reversible drum type mixer/ concrete batch mix plant (pan mixer) .
825	Providing and laying in situ / ready mix M-25 plain cement concrete of trap /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. including provision of \"V\" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/steel form work centering (excluding dewatering by means of pump) and including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by engineer in charge basic rate shall be increased for height above 5.00 m in followinh manners (a) Height upto 5 M. (With Concrete Mixer)With Natural / VSI standard Artificial Sand( A) Depth to 10 m percent extra for rate( B ) Depth upto 15 m Add 40 percent extra for rate( C ) Depth upto 20 m Add 60 percent extra for rate( D ) Depth upto 20 m Add 100 percent extra for rate
826	Providing and laying in situ / ready mix M-25 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcementetc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer and fine agreegates of required specifications ( VSI sand finely washed etc ) i) Height up to 5 m, Normal rate.ii) Height 5 to 7.50 m, add 5 percent extra over basic rate.iii) Height 7.50 to 10 m, 7.50 percent extra. iv) Over 10 m Height, add 10 percent extra for every 2.50m rise.
827	Providing and laying of filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRTH specifications to a thickness of Not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition as per drawing and technical specifications etc. complete.
828	Anti-Crash Barrier(M40):-Providing Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with R.C.C. M 40 Grade concrete with HYSD reinforcement conforming to IRC:21 and dowel bars 25 mm Dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MOST circular No.RW/NH - 33022/1/94-DO III dated 24 June 1994 as per dimensions in the approved drawing and at locations directed by the Engineer, all as specified etc. complete. Spec: MORT and H 2013 Cl 811 Page No 360
829	Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete.
830	Providing 100mm diameter GI water spouts as per detailed drawings in RCC slab and wearing surface / kerb etc. complete.
831	Providing and laying cement concrete wearing coat M30 grade with batch mix type /concrete mixer with SCADA including reinforcement as per drawings and technical specifications etc. complete with fine agreegates of required specifications ( VSI sand finely washed etc )
832	Providing and laying weepholes of 100mm diameter PVC pipes as per drawing for abutmentreturns, return walls etc. Complete.
833	Providing and laying in PCC M15 grade leveling course below approach slab complete with fully automatic micro processor PLC with SCADA enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) as per drawings and Technical specifications tc. complete withfine agreegates of required specifications ( VSI sand finely washed etc )
834	Providing and laying of RCC in M30 grade approach slab including reinforcement and formwork complete with fully automatic micro processor PLC with SCADA enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) as per drawings and technical specifications etc. complete with fine agreegates of required specifications ( VSI sand finely washed etc )
835	Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil Not exceeding 150 mm in thickness. By Mechanical Means
836	Providing and laying rubble stone flooring laid in cement mortar 1:3 as per drawings and technical specifications etc. complete.
837	Providing and laying pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and technical specifications etc. complete. (by stone/boulder)
838	Providing and laying in situ / ready mix controlled grade of M25 of trap /granite /quartzite/gneiss metal for RCC works in cut off walls / curtain walls including necessary scaffolding, centering, compacting by vibrator, finishing and curing etc.complete. (withfully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/concrete batch mix plant (pan mixer) with fine agreegates of required specifications ( VSI sand finely washed etc ), excluding reinforcement)
839	Providing and Laying factory made coloured chamfered edge Cement concrete grass paver blocks of required strength,thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine fine aggregate (natural sand/crushed sand VSI grade finely washed etc.), compacting and proper embedding/laying of inter locking paver blocks into the fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and cutting of paver blocks as per required size and pattern, finishing and sweeping extra fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and complete as per manufacturer spsecifications & direction of Engineer-in-Charge. 60mm thick CC paver block of M-35 grade concrete with approved colour and design & pattern.
840	Providing and fixing bitumiNous pad 25 mm thick for expansion joints in retaining wall, compound wall etc. complete.
841	Cutting down trees including trunks and branches with girths above 30cm to 60cm and stacking the materials neatly with all lifts and lead of 1000m as directed and earth filling in the depression / pit if any.
842	Cutting down trees including trunks and branches with girths above 60cm to 90cm and stacking the materials neatly with all lifts and lead of 1000m. as directed and earth filling in the depression/pit if any.
843	Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil Not exceeding 150 mm in thickness.
844	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means
845	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift 1.5m to 3.0m ). By Mechanical Means
846	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(lift 3.0m to 4.5m ). By Mechanical Means
847	Disposing the excess excavated material Murum, Earth obtained from the items of excavation and disposing the same off the site and at dumping place approved by the governing authority including loading, unloading and all leads and lifts complete.
848	Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. Complete.
849	Filling in plinth and floors with contractors material/brought from outside and approved by Engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc. Complete.
850	Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.
851	Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. Number : As directed by Engineer-in-charge
852	Providing and laying Cast in situ/Ready Mixcement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will Not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
853	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/quartzite/gneissmetalforR.C.C.workinfoundationslike raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork,coverblocks,laying/pumping,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
854	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite /quartzite/gneissmetalforR.C.C.columnsasperdetaileddesignsanddrawingsoras directedincludingsteelcentering,formwork,coverblocks,laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smoothand even surface or roughening if special finish is to be providedand curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
855	ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcementandstructuralsteel).withfullyautomaticmicroprocessorbasedPLCwith SCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc. complete. With fine aggregate (Crushed sand VSI Grade)
856	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
857	Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
858	Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
859	Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, caNopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
860	Providing fly ash brick masonry with conventional / I.S. type fly ash bricksin C.M. 1:6 in foundation and plinth includingbailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.
861	Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete
862	Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including subbase of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete )
863	Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete)
864	Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.
865	Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for Not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.
866	Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 with fine cement finish 1.5 mm thick without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. Complete.
867	Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.
868	Providing and laying Rough Shahabad Stone Flooring 25mm to 30mm thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. complete
869	Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. Including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. Complete
870	Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Rubyred / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.
871	Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade withfullmoulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaningetc. complete.
872	Providing and laying vitrified rustic matt stone finish tileshaving size 590 mm to 605 mm x 590 mm to 605 mm to 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approvedmake,shadeandpatternfordadoandskirtinginrequiredpositionfixedin1:4 cement mortar including neat cement float, filling joints, curing and cleaning. etc. Complete.
873	Providing and fixing Robber Moulded PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kilogram/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using 100% crushed sand)
874	Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. Complete.
875	Providing leather finished polishing to Kota / Marble / Shahabad / Kadappa Stone slab by continuous grinding in 4 coats of different bits to receive rough and matty finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. Complete.
876	Providing and laying telephone black / Amba White / Cadbury brown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler Noing/moulding the sharp edges wherever necessary, curing,etc. Complete.
877	Providing & fixing of 25mm thick EPDM Flooring with adhesive as per design, drawings & manufacturer’s specification with all fittings, fixtures etc. Complete.
878	Providing & fixing on site 75 mm thick reflexology ( Pebbles ) stone flooring in on bed of 1:4 Cement mortar including float filling joints with neat cement slurry, curing, polishing and cleaningetc. Complete.
879	Providing & fixing in position 80 mm thickcobble stone flooring on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaningetc. Complete.
880	Providing and laying in place 300mm x 300mm x 16mm cement tactile directional and warning tiles (for a person with visual impairment)of the approved brand and make and specified colour for outdoor floors such as footpath, courtyard, multimodals location etc. laid on 20mm thick base of cement mortar 1:4 (1 cement: 4 coarse sand) in all shapes and patterns including grouting the joints with white cement with matching pigments etc. complete as per direction of engineer in charge.
881	Providing and fixing mild steel grill railing weighing 20Kilogram/ One Square Metre. with PVC handrail cover and newel post for staircases, including fabricating, fixtures, drilling holes in concrete / other surface, erecting the grill work, necessary welding, fixing by nuts and bolts, fixing PVC handrail cover, with one coat of anticorrosive paint and two coats of oil painting with approved colour and shade, remaking the damaged surface, cleaning, etc. complete. Spec. One Number : As directed by Engineer in charge.
882	Providing and Laying factory made coloured chamfered edge Cement concrete grass paver blocks of required strength,thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine fine aggregate (natural sand/crushed sand VSI grade finely washed etc.), compacting and proper embedding/laying of inter locking paver blocks into the fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and cutting of paver blocks as per required size and pattern, finishing and sweeping extra fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and complete as per manufacturer spsecifications & direction of Engineer-in-Charge. 60mm thick CC paver block of M-35 grade concrete with approved colour and design & pattern
883	Supplying, filling, spreading & levelling gravels of size range 5mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge.
884	Providing and laying in situ M-25 cement concrete of trap / granite / quartzite / gneiss metal with 15% plum of trap stones for retaining walls and jetty etc. including necessary formwork, compacting, curing, bailing out water manually in tidal range etc. complete
885	Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and iNorganic gases(Nox, VOC?s, CO, Sox, for maldehydes, etc.) in presence of natural or artificial light. It contains Graphene and naNoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company techNologist.
886	Providing & laying of HDPE Pond liner of 750 micron thickness as per manufacturer’s Specification & instructions from engineer in charge etc. Complete.
887	Stamp Concrete of 100mm Thickness - Providing and Laying in-situ M30 Grade unreinforced plain cement stamp concrete of 100mm thickness pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate (natural sand / VSI grade finely washed crushed sand) Confirming to IS 383, as per mixed in a batching and mixing plant / Non tilting mixer and weigh batcher as per approved mix design, admixtures, transporting to site in nagpur city with lead upto 20KM (on Inner Ring Road from Avasti nagar to wadi), spreading, laying with approved make pover, compacted and finished in a contiNous operation, finishing to lines and grades Also Providing, Placing and applying stamp powder which is light fast UV resistant pigment with appropriate chemical compounds of desired colour on base concrete after excess bleed water has evaporated using dry shake method @5kg per Sqm. Including texturing, and covering with plastic sheet (min 200 micron thickness) and also applying two coats of UV-stable,30 % solids clear sealer @ 150 to 250 gms per Sqm using surface roller and protecting from falling dust,dirt and curring by curring compound / by providing cement vata in cement Mortar 1:8 @ 0.6m x 0.6m center to center, admeasuring 80mm at bottom and 40mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-incharge or Landscape architect etc. complete. (prior approval of superinteding Engineer will be necessary )
888	Supply and Installation of translucent roof with DPI Flux standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 12 mm thick of 900 mm (min.) width with angular daylighting concept. Panels shall have minimum six layers with truss bridge design for higher flexibility & strength. Panels with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with 3 One Numbers self-drilling screws & trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show No sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall Not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall Not be more than 1.6 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cap/Aluminium U/F profile/ Glazing Bar for ends as required. Panel shall be fixed over MS structural steel/MS purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory authorized labour with supervision to complete the entire panel installation as per drawing & direction of the engineering in charge. Colour: As per Approval. Approved Make: FLUX by DPI Daylighting or approved equivalent The 12mm thick panels shall be used for a roofing height of upto 15 mtrs.
889	GARDEN SOIL:-Supplying on site garden soil well sieved 80 % to pass through I.S. sieve of 10 mm size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry. The color of the soil generally is red. The soil will be measured by measuring box. (Farma) Item includes Transporting, loading -unloading etc .(Lead charges per 15 km. considered Excluding royalty.)
890	FARM YARD MANURE:-Supplying on site well decayed, well dried, well powdered, without clods and free from stones, dried grass and other rubbish material. The color of the manure generally is black. The manure will be measured by measuring box.(Farma) Item includes Transporting, loading -unloading etc. (Lead charges per 10 km. considered.)
891	Filling fresh garden soil /silt & manure in excavated area including lead up to a distance of 50 Mtrs (Rates Form PWD SSR 2022-23 / Sr. No. -104 Item No-2.30Page No.-25 )
892	Mixing garden soil/silt &manure thoroughly well, watering previous night. Planting required plant species; lawn grass as directed etc. complete. (1/10 of unskilled labour i.e 648/10Including (Overhead Charges 10% & Contractor Profit 10% ) ( Labour Rates For PWD SSR 2022-23 / Sr. No. 62 Page No.-545 )
893	Providing on site required variety of lawn (free from weeds /diesease etc.) Cynadon/ paspalum/ selection for 1 Sqm. area dibbling distance 5 cms.apart c/c.
894	Providing on site required variety of Shrubs (free from weeds /diesease etc.) 30 cms. apart c/c. Name:- Murraya(Kamini);Bag Size 7\"\" x 8\"\",(plants list) 1(a) serial No 15.
895	Providing on site required variety of Flowering Climbers and Creepers Well Developed , Healthy Fresh Free from Pest and Diseases. 15cmto 30cm. Name: Clerodendrum; Bag Size 7\"\" x 8\"\",(plants list) 3 serial No. 3.
896	Flowering Trees- Flowering Trees- Minimum Girth 10 to 15 C. M. Clear trunk, with maximum No. Of leaves, well developed caNopy free from pest & diseases well seteled in appropriate mannersize of plybag, uniform in size and root systemare un damaged.Bahava
897	Flowering Trees- Flowering Trees- Minimum Girth 10 to 15 C. M. Clear trunk, with maximum No. Of leaves, well developed caNopy free from pest & diseases well seteled in appropriate mannersize of plybag, uniform in size and root systemare un damaged.Spathodia
898	Flowering Trees- Minimum Girth 10 to 15 C. M. Clear trunk, with maximum No. Of leaves, well developed caNopy free from pest & diseases well seteled in appropriate mannersize of plybag, uniform in size and root systemare un damaged.Bakul
899	Flowering Trees- Minimum Girth 10 to 15 C. M. Clear trunk, with maximum No. Of leaves, well developed caNopy free from pest & diseases well seteled in appropriate mannersize of plybag, uniform in size and root systemare un damaged.Sonmohar
900	Providing on site required variety of HedgesWell Developed, Healthy Foliage / Half Bloom Stage , Free from Pest and Diseases. 20cm & above. Name:- Hibiscus ;Bag Size 7\"\" x 8\"\", serial No 7
901	Providing on site required variety of Ground covers Well Developed, Healthy , Free from Pest an Disease. 15cmto 20cm. Name:- Gerbera ;Bag Size 7\"\" x 8\"\", serial No 7
902	Providing on site required Palm should be well Developed, Good Branching, healthy Condition, appropriat Size in Polybag, undamaged. BAg Size:15\" x 16\",Height 5 to 7 ft NAme: Supari. Serial No 11 (c) 1
903	Providing on site required Palm should be well Developed, Good Branching , healthy Condition, appropriat Size in Polybag, undamaged. BAg Size:15\" x 16\", Height 4 to 5 ft, NAme: Raphis palm. Serial No 11 (c) 5
904	Providing on site required Palm should be well Developed,G ood Branching , healthy Condition, appropriat Size in Polybag, undamaged. BAg Size:18\" x 18\", Height 5 to 6 ft, NAme: NAme: Golden Wichmeri. Serial No 11 (d) 5
905	Providing on site required Palm should be well Developed,G ood Branching , healthy Condition, appropriat Size in Polybag, undamaged. BAg Size:21\" x 21\", Height 9ft & above, NAme: Areca palm. Serial No 11 (e) 1
906	Providing on site required Palm should be well Developed,G ood Branching , healthy Condition, appropriate Size in Polybag, undamaged. BAg Size:21\" x 21\", Height 9ft & above, NAme: Fox tail palm. Serial No 11 (e) 3
907	Orientation Signage Pole :- Providing & fixing of Orientation signage Pole Made up of Marine Quality Composite {Marine grade corrosion resistant & Hydrocarbon solvent resistant), with the size of 12\"X4\"Inner Frame and 60mm dia for support structure made of mild steel pipe IS:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. It\"s reinforced with glass fibre CS 1040 450GSM E Glass Matt with a density of 450g/m2 & 300GSM Emulsion Chopped strand matt with a density of 300g/m2. The product is an all Weather proof & Maintenance free with long design life. It\"s self-coloured textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint. With long standing life. These FRP Pole is individually crafted) which usually require maintenance and care. The structure will be illuminated from within. Item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. Complete on site. Structural Stability Certificate will be given.
908	Identification signage Pole :- Providing & Installation of Identification signage Pole Made up of Marine Quality Composite from 60mm dia for support structure {Marine grade corrosion resistant & Hydrocarbon solvent resistant) with all fittings fixture, hardwares , all as per design & drawings with all fittings, fixtures etc. Complete , with the size of 6\"X1.5\"Inner Frame made of mild steel pipe od 60mm as the main support section IS:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. It\"s reinforced with glass fibre CS 1040 450GSM E Glass Matt with a density of 450g/m2 & 300GSM Emulsion Chopped strand matt with a density of 300g/m2. The product is an all Weather proof & Maintenance free with long design life. It\"s self-coloured textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint. With long standing life. These FRP Pole is individually crafted) which usually require maintenance and care. Item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. Complete on site. Structural Stability Certificate will be given.
909	Directional Signage -5M Single Arm FRP Pole with Haldi banner and leaf (Signage): The single arm pole shall be made of 68 mm dia with metal hot dipped galvanized pipe support inside the FRP cladded pole. Made of Marine Quality Composite {Marine grade corrosion resistant & Hydrocarbon solvent resistant), Inner Frame made of IS:3601 or equivalent, hotdip galvanized 60 microns, post fabrication. It\"s reinforced with glass fibre CS 1040 450GSM E Glass Matt with a density of 450g/m2 & 300GSM Emulsion Chopped strand matt with a density of 300g/m2. The product is an all Weather proof & Maintenance free with long design life. It\"s self-coloured textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint. With long standing life. These FRP Pole is individually crafted which usually require maintenance and care. Pride Suspended LUMINAIRE: 50 Watt LED Suspended Luminaire with height 450MM and width 500MM. Item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. Complete on site. Structural Stability Certificate will be given.
910	Directional Signage post :-Providing & fixing of Directional Signage post (Signage) with 5ft height and 700mm wide post and 48 mm dia support pipe with frame having and metal frame to show the directional or location of certain area. Made of Marine Quality Composite {Marine grade corrosion resistant & Hydrocarbon solvent resistant), Inner Frame made of mild steel pipe IS:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. It\"s reinforced with glass fibre CS 1040 450GSM E Glass Matt with a density of 450g/m2 & 300GSM Emulsion Chopped strand matt with a density of 300g/m2. The product is an all Weather proof & Maintenance free with long design life. It\"s self-coloured textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint. With long standing life. Item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer incharge etc. Complete on site. Structural Stability Certificate will be given.
911	Haldi Information post :- Providing & fixing of Haldi Information post- farming (Signage) with 5ft height and 700mm wide and 48 mm dia support pipe with frame having a metal frame work to be used for provided information regarding the Harida Haldi project and which type of HALDI crop grown on the particular field. Made of Marine Quality Composite {Marine grade corrosion resistant & Hydrocarbon solvent resistant), Inner Frame made of mild steel pipe IS:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. It\"s reinforced with glass fibre CS 1040 450GSM E Glass Matt with a density of 450g/m2 & 300GSM Emulsion Chopped strand matt with a density of 300g/m2. The product is an all Weather proof & Maintenance free with long design life. It\"s self-coloured textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint. With long standing life. These FRP Pole is individually crafted) which usually require maintenance and care. Item is also including installation with all fittings fixture, hardwares , scaffolding, all as per design & drawings & as per instructions from engineer in charge etc. Complete on site. Structural Stability Certificate will be given.
912	STATUE- BALASAHEB THAKREProviding Statue Of 15 ft height in 1st quality fiber material with metal armature (Jindal). with internal structure pipe 100mm dia pipe welded together with support pipe in between and arm also with the same pipe of size 1mtr-0.5 mtr the overall height would be 3.5mt from ground. Item is including installation with all fittings fixture, hardwares , scaffolding, all as per design & drawings & as per instructions from engineer in charge etc. Complete on site. Material Made of Marine Quality Composite {Marine grade corrosion resistant & Hydrocarbon solvent resistant), Inner Frame made of mild steel pipe IS:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. It\"s reinforced with glass fibre CS 1040 450GSM E Glass Matt with a density of 450g/m2 & 300GSM Emulsion Chopped strand matt with a density of 300g/m2. The product is an all Weather proof & Maintenance free with long design life. It\"s self-coloured textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint. With long standing life. Structural Stability Certificate will be given.
913	PERGOLAS TYPE 1:- Providing & fixing of TYPE 1 Pergolas with frp column 200mm x 200 mm in ms fabrication use in 88.2 od ms pipe 3 mm thickness. FRP beam size 150 mm x 150 mm in ms fabrication 40 mm x 40 mm x 2 mm thickenss tube in framing. frp support for beam and column use in 75 mm x 75 mm x2 mm ms tube with frp cladding. Frp thickness minimum 3 to 4 mm . column fittng in 12 mm x 150 mm anchor bolt in foundation. Including Installation Machineries, Scaffoldings, Electricity, other site Utilities in client scope. Made of Marine Quality Composite {Marine grade corrosion resistant & Hydrocarbon solvent resistant), Inner Frame made of mild steel pipe IS:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. It\"s reinforced with glass fibre CS 1040 450GSM E Glass Matt with a density of 450g/m2 & 300GSM Emulsion Chopped strand matt with a density of 300g/m2. The product is an all Weather proof & Maintenance free with long design life. It\"s self-coloured textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint. With long standing life. Item is including installation with all fittings fixture, hardwares , Scaffolding, all as per design & drawings & as per instructions from engineer in charge etc. Complete on site. Structure Stability Certificate will be provided.
914	PERGOLAS TYPE 2( for seating areas ):- Providing & fixing of type 2 with FRP column 200mm x 200 mm in ms fabrication use in 88.2 od ms pipe 3 mm thickness . FRP beam size 150 mm x 150 mm in ms fabrication 40 mm x 40 mm x 2 mm thickness tube in framing. FRP support for beam and column use in 75 mm x 75 mm x2 mm ms tube with frp cladding. FRP thickness minimum 3 to 4 mm . column fitting in 12 mm x 150 mm anchor bolt in foundation. Including Installation Machineries, Scaffoldings, Electricity, other site Utilities in client scope. Made of Marine Quality Composite {Marine grade corrosion resistant & Hydrocarbon solvent resistant), Inner Frame made of mild steel pipe IS:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. It\"s reinforced with glass fibre CS 1040 450GSM E Glass Matt with a density of 450g/m2 & 300GSM Emulsion Chopped strand matt with a density of 300g/m2. The product is an all Weather proof & Maintenance free with long design life. It\"s self-coloured textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint. With long standing life. TYPE 2 (for seating areas ). Item is including installation with all fittings fixture, hardwares , Scaffolding, all as per design & drawings & as per instructions from engineer in charge etc. Complete on site. Structure Stability Certificate will be provided.
915	SCULPTURE-1 Man Sitting Providing & fixing made of frp material as per 3 to 5 ft heights as per design & drawings with Combination of 48 mm and 26mm dia pipe and cage work made up of metal path with 20-25 thickness width Made of metal support inside and above Marine Quality Composite {Marine grade corrosion resistant & Hydrocarbon solvent resistant), Inner Frame made of mild steel pipe IS:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. Item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. Complete on site. It\"s reinforced with glass fibre CS 1040 450GSM E Glass Matt with a density of 450g/m2 & 300GSM Emulsion Chopped strand matt with a density of 300g/m2. The product is an all Weather proof & Maintenance free with long design life. It\"s self-coloured textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint. With long standing life. Require maintenance and care.
916	Sculpture 2 Man with hammer Sculpture providing & fixing made of frp material as per 3 to 5 ft heights as per design & drawings with Combination of 48 mm and 26mm dia pipe and cage work made up of metal path with 20-25 thickness width Made of metal support inside and above Marine Quality Composite {Marine grade corrosion resistant & Hydrocarbon solvent resistant), Inner Frame made of mild steel pipe IS:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. Item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. Complete on site. It\"s reinforced with glass fibre CS 1040 450GSM E Glass Matt with a density of 450g/m2 & 300GSM Emulsion Chopped strand matt with a density of 300g/m2. The product is an all Weather proof & Maintenance free with long design life. It\"s self-coloured textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint. With long standing life. Require maintenance and care.
917	Sculpture 3 Women standing- Sculpture providing & fixing made of frp material as per 3 to 5 ft heights as per design & drawings with Combination of 48 mm and 26mm dia pipe and cage work made up of metal path with 20-25 thickness width Made of metal support inside and above Marine Quality Composite {Marine grade corrosion resistant & Hydrocarbon solvent resistant), Inner Frame made of mild steel pipe IS:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. Item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. Complete on site. It\"s reinforced with glass fibre CS 1040 450GSM E Glass Matt with a density of 450g/m2 & 300GSM Emulsion Chopped strand matt with a density of 300g/m2. The product is an all Weather proof & Maintenance free with long design life. It\"s self-coloured textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint. With long standing life. Require maintenance and care.
918	Sculpture 4 Buffalo- Sculpture providing & fixing made of frp material as per 3 to 5 ft heights as per design & drawings with Combination of 48 mm and 26mm dia pipe and cage work made up of metal path with 20-25 thickness width Made of metal support inside and above Marine Quality Composite {Marine grade corrosion resistant & Hydrocarbon solvent resistant), Inner Frame made of mild steel pipe IS:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. Item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. Complete on site. It\"s reinforced with glass fibre CS 1040 450GSM E Glass Matt with a density of 450g/m2 & 300GSM Emulsion Chopped strand matt with a density of 300g/m2. The product is an all Weather proof & Maintenance free with long design life. It\"s self-coloured textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint. With long standing life. Require maintenance and care.
919	SCULPTURE-5:- Man with Calf and Calf Sculpture -providing & fixing made of frp material as per 3 to 5 ft heights as per design & drawings with Combination of 48 mm and 26mm dia pipe and cage work made up of metal path with 20-25 thickness width Made of metal support inside and above Marine Quality Composite {Marine grade corrosion resistant & Hydrocarbon solvent resistant), Inner Frame made of mild steel pipe IS:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. Item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. Complete on site. It\"s reinforced with glass fibre CS 1040 450GSM E Glass Matt with a density of 450g/m2 & 300GSM Emulsion Chopped strand matt with a density of 300g/m2. The product is an all Weather proof & Maintenance free with long design life. It\"s self-coloured textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint. With long standing life. Require maintenance and care.
920	SCULPTURE-6:- Man standing Sculpture providing & fixing made of frp material as per 3 to 5 ft heights as per design & drawings with Combination of 48 mm and 26mm dia pipe and cage work made up of metal path with 20-25 thickness width Made of metal support inside and above Marine Quality Composite {Marine grade corrosion resistant & Hydrocarbon solvent resistant), Inner Frame made of mild steel pipe IS:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. Item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. Complete on site. It\"s reinforced with glass fibre CS 1040 450GSM E Glass Matt with a density of 450g/m2 & 300GSM Emulsion Chopped strand matt with a density of 300g/m2. The product is an all Weather proof & Maintenance free with long design life. It\"s self-coloured textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint. With long standing life. Require maintenance and care.
921	Providing & fixing of Type 01 module ( with back rest) FRP seating with pvc wooden panel (1.5m with wooden panel on top) Bench should be Made in combination of 80 mm dia and 40mm dia pipe marine quality Composite (marine grade corrosion resistant & Hydrocarbon solvent resistant), 2.4m x 0.45m (module) The product should be an all Weather proof & Maintenance free with long design life. It should be self colored textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint, with long standing life Item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. Complete on site.
922	Providing & fixing of Type 02 module ( without back rest) FRP seating with pvc wooden panel Bench should be Made in combination of 80 mm dia and 40mm dia pipe marine quality Composite (marine grade corrosion resistant & Hydrocarbon solvent resistant), 2.4m x 0.45m (module) The product should be an all Weather proof & Maintenance free with long design life. It should be self coloured textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint, with long standing life . Item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. Complete on site.
923	Providing & fixing of Type 01 module ( with back rest) FRP seating with pvc wooden panel (1.5m with wooden panel on top) Bench should be Made of 80 mm dia and 40mm dia pipe marine quality Composite (marine grade corrosion resistant & Hydrocarbon solvent resistant), 2.4m x 0.45m (module) The product should be an all Weather proof & Maintenance free with long design life. It should be self colored textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint, with long standing life. Item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. Complete on site.
924	Providing & fixing of Type 02 module ( without back rest) FRP seating with pvc wooden panel (1.5m with wooden panel on top) Bench should be Made of 80 mm dia and 40mm dia pipe marine quality Composite (marine grade corrosion resistant & Hydrocarbon solvent resistant), 2.4m x 0.45m (module) The product should be an all Weather proof & Maintenance free with long design life. It should be self colored textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint, with long standing life. Item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. Complete on site.
925	Dustbin FRP dustbin should be Made of marine quality Composite (marine grade corrosion resistant & Hydrocarbon solvent resistant) all Weather proof & Maintenance free with long design life. The product should be 700 x 500 FRP Planter with basic design and 40 x 20mm sq. pipe to support the section of dustbin. It should be selfcolored textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint, with long standing life. The Glass Fiber Reinforced Polymer Camouflage should be of Thickness 3 to 4 mm average with sizes 2000x600 mm. Item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. Complete on site.
926	Providing & placing at position Type1 of 700mm x 305mm FRP Plantershould be made of marine quality Composite (marine grade corrosion resistant & Hydrocarbon solvent resistant). The product should be 700 x 305 FRP Planter with basic design and all Weather proof & Maintenance free with long design life. It should be self-colored textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint, with long standing life. The Glass Fiber Reinforced Polymer Camouflage shall be of Thickness 3 mm average. Product should come with a 12 month warranty against any manufacturing defect.
927	Providing & placing at position Type2 of 610 mm x 254 mm FRP planterFRP planter should be made of marine quality Composite (marine grade corrosion resistant & Hydrocarbon solvent resistant). The product should 610 x 254 FRP Planter with basic design and all Weather proof & Maintenance free with long design life. It should be self-colored textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint, with long standing life. The Glass Fiber Reinforced Polymer Camouflage should be of Thickness 3 mm average. Product should come with a 12 month warranty against any manufacturing defect.
928	Providing & placing at position Type3 of 510 x 200 FRP planter FRP planter should be made of marine quality Composite (marine grade corrosion resistant & Hydrocarbon solvent resistant). The product should 510 x 200 FRP Planter with basic design and all Weather proof & Maintenance free with long design life. It should be self-colored textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint, with long standing life. The Glass fiber Reinforced Polymer Camouflage should be of Thickness 3 mm average. Product should come with a 12 month warranty against any manufacturing defect.
929	Tree Grating:- Providing & fixing of FRP Tree grating of size 1100 x 1100 x 25 MM FRP material with various design options. Made of marine quality Composite (marine grade corrosion resistant & Hydrocarbon solvent resistant), the product should be an all Weather proof & Maintenance free with long design life. It should be self-colored textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint, with long standing life. as per design & drawings with all fittings, fixtures etc. Complete. Item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. Complete on site.
930	Selfie Point I LOVE HALDI Providing & fixing of 2.8M x 2.8 M with height of 2.8m. FRP KIOSK. Made of FRP material with dark wood finish. FRP dustbin included in the kiosk. Made of Marine Quality Composite {Marine grade corrosion resistant & Hydrocarbon solvent resistant), Inner Frame made of mild steel pipe IS:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. It\"s reinforced with glass fibre CS 1040 450GSM E Glass Matt with a density of 450g/m2 & 300GSM Emulsion Chopped strand matt with a density of 300g/m2. The product is an all Weather proof & Maintenance free with long design life. It\"s self-coloured textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5viscosity aliphatic paint. With long standing life. Item is including placing, installation with all fittings, fixture, hardwares , all as per design, drawings & as per instructions from engineer in charge etc. Complete on site.
931	Tumble Twin
932	Animal MGR
933	Deluxe junior See Saw
934	Double post Swing
935	Duck Rider
936	Fun Walker Single
937	Step trainer
938	Chest press double
939	Shoulder press double
940	Tai chi Cum Standing Twister
941	Leg Press Cum parallel Bar
942	Leg Press Cum Seating Twister
943	Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil Not exceeding 150 mm in thickness.
944	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means
945	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift 1.5m to 3.0m ). By Mechanical Means
946	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(lift 3.0m to 4.5m ). By Mechanical Means
947	Disposing the excess excavated material Murum, Earth obtained from the items of excavation and disposing the same off the site and at dumping place approved by the governing authority including loading, unloading and all leads and lifts complete.
948	Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent ofclorophyrifosper square metre of surface area covering ten years guarantee on bond paper.
949	Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent ofaldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper.
950	Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. Complete.
951	Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. Complete.
952	Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.
953	Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. Number : As directed by Engineer-in-charge
954	Providing and laying Cast in situ/Ready Mixcement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will Not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
955	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/quartzite/gneissmetalforR.C.C.workinfoundationslike raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork,coverblocks,laying/pumping,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
956	Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, caNopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete
957	Providing, Fixing & Installation of 18mm thick GRC ( Glass reinforcedConcrete ) of high quality ISO Grade upto 2.4 mtr height with 18mm GRC Chopped strands includingpure white Cement , silica sand for finishingwith coating of SBR liquid or equivalent chemical for bonding work with all fittings, fixtures hardwares, wax polishing, caster, fitter, labour charges, scaffolding etc. complete as per design, drawings & manufacturer’s specification also as per instructions from Engineer in charge etc. complete. SBR Liquid will be used for bonding of various materials of the structure which also helps in waterproofing and adhesion giving it a long life durability specially multi die\"s will be made using CNC machine giving it a high precession for the design of the structure. Material is Made of Marine Quality Composite {Marine grade corrosion resistant & Hydrocarbon solvent resistant). It\"s reinforced with glass fibre CS 1040 450GSM E Glass Matt with a density of 450g/m2 & 300GSM Emulsion Chopped strand matt with a density of 300g/m2. The product is an all Weather proof & Maintenance free with long design life. It\"s self-coloured textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint. With long standing life. Structural stability certificate will be provided.
958	Providing, Fixing & Installation of 4 mm thick FRP ( Fiber Reinforced Polymer) material high quality ISO Grade. FRP material placed above GRC of high quality ISO Grade material as per design, drawings & as per Manufacturer’s specification & Instructions from Engineer in chargeincluding all hardener, fittings, fixtures, welder, patch work,labours charges, scaffolding etc. complete . The product is an all Weather proof & Maintenance free with long design life. It\"s self-coloured textured surface finish with scratch resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint. With long standing life. Structural stability certificate will be provided
959	Providing & applying Weather finish coating & lackering of 100microns to all surfaces of GRC & FRP with all rubbing, finishingwith all equipments, labours, scaffolding etc. complete
960	Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil Not exceeding 150 mm in thickness.
961	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means
962	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift 1.5m to 3.0m ). By Mechanical Means
963	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(lift 3.0m to 4.5m ). By Mechanical Means
964	Disposing the excess excavated material Murum, Earth obtained from the items of excavation and disposing the same off the site and at dumping place approved by the governing authority including loading, unloading and all leads and lifts complete.
965	Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent ofclorophyrifosper square metre of surface area covering ten years guarantee on bond paper.
966	Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent ofaldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper.
967	Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. Complete.
968	Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. Complete.
969	Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.
970	Providing and laying Cast in situ/Ready Mixcement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will Not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
971	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/quartzite/gneissmetalforR.C.C.workinfoundationslike raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork,coverblocks,laying/pumping,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
972	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite /quartzite/gneissmetalforR.C.C.columnsasperdetaileddesignsanddrawingsoras directedincludingsteelcentering,formwork,coverblocks,laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smoothand even surface or roughening if special finish is to be providedand curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
973	ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcementandstructuralsteel).withfullyautomaticmicroprocessorbasedPLCwith SCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc. complete. With fine aggregate (Crushed sand VSI Grade)
974	ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
975	Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
976	Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
977	Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, caNopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
978	Providing fly ash brick masonry with conventional / I.S. type fly ash bricksin C.M. 1:6 in foundation and plinth includingbailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.
979	Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)
980	Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in Half brick thick wall including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)
981	Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. Making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. Complete.
982	Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.
983	Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for Not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.
984	Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 with fine cement finish 1.5 mm thick without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. Complete.
985	Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.
986	Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete.
987	Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.
988	Providing and laying vitrified matt fininsh tileshaving size 590 mm to 605 mm x to 605 mm of8to10mmthicknessandconfirmingIS.15622-2006(GroupBla)ofapprovedmake, shadeandpatternforflooringinrequiredpositionlaidonabedof1:4cementmorar including neat cement float, filling joints, curing and cleaning etc. complete.
989	Providing and laying vitrified matt finish tileshaving size 590 mm to 605 mm x to 605 mm of8to10mmthicknessandconfirmingIS.15622-2006(GroupBla)ofapprovedmake, shadeandpatternfordadoandskirtinginrequiredpositionfixedin1:4cementmortar including neat cement float, filling joints, curing and cleaning etc. complete.
990	Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.
991	Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.
992	Providing andapplyingimpression 24 carrat Luxury paint of approved make &approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surfaceintwocoats,includingsubsurfaceprparationbyAcrylicputtyandAcrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC).
993	Providing andapplying twocoatsofHighAlbedopainthavingminimum SolarReflective Index (SRI) 108 (with solar reflectance & thermal emittance tested as per ASTM)
994	Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete.
995	Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plProviding and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts completeates etc.
996	Providing and fixing mild steel grill work for windows, ventilators, etc. 20 Kilogram/Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.
997	Providing and fixing 90 cm. x 60 cm. Granite plateengraving 10cm. height letter, figuresincluding painting the letters /figures with approved colour and shade complete.
998	Providing and fixing factory made door/Window frames of required colour made with wood Polymer composite (WPC) extuded internal ribbed sections conforming to American Society for testing and materials (ASTM) in regard with density, tensile strength, flexural strength, Izod impact, water absorption and screw withdrawal strength with wall thickness of 5mm (+/1mm) and with frames having mitred joints at each corner, joined together by two No. of 10 x 8 mm & 40 mm long PVC dovetail keys including hard wood piece support along the full vertical and horizontal length in rebate portion hole for fixing hinges and fixtures and the frames fixed to Walls/columns with 15 mm long dash fasteners/holdfasts (dash fasteners/holdfasts to be paid separately) etc. complete as per the direction of Engineer in charge,with prior approval of concerned Superitending Engineer. 1.3 For Profile size of 125 x 50 mm with 38 x 12 mm rebate
999	Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and iNorganic gases(Nox, VOC?s, CO, Sox, for maldehydes, etc.) in presence of natural or artificial light. It contains Graphene and naNoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company techNologist.
1000	Providing and fixing in position U.P.V.C.(Unplasticized Poly Vinyl Chloride) having multi- chambered outer frame section (73 x 50)mm with an outer wall thickness of 2mm & steel reinforcement, multi-chambered slider frame (73x 60) mm with steel reinforcement, multi- chambered slider sash (46x 82) mm with steel reinforcement designed to give optimum strength, 5 mm thick toughened double glass with 12 mm spacer of good quality including alluminium track, Inter-locking profile, coextruded beadings, EPDM gaskets,silicon sealent,sliding handle, fixtures and fastenings (couplings, hinges) including with all required screws and nuts with all necessary U.P.V.C. sections as per the detailed drawing and as directed by Engineer-In-Charge etc. Complete. Three track Window
1001	MAIN TABLE - 1800 x 750,ERU - 900W X 600D- (Cabin) ( Providing Godrej or equivalent )# UPBEAT is a Modular desk based system of ht. 750 mm.Cube legs are fabricated by Argo Shield & have a square section. Cube legs are available for work top level 750 mm from base.Wire Management Single Power box with raiser for Manager Modules, Single tables (8+3 Anchor Roma). Soft closing access flap with brush.Metal modesty: Metal modesty is made from 0.8 mm thick CRCA. Metal modesty are mounted on the worktop with the help of the modesty mounting brackets made of 3 mm thick HR Worktop: 25mm thk prelaminated partical board with pvc lipping.
1002	T MODULE - 2 PERSON -PENTA MODULE (W/o Pedestal and screen) 1500W1 X 1500W2 X 600D( Providing Godrej or equivalent )# UPBEAT- Modular desk based system with 1200mmht.CUBE legs are fabricated by Argo Shield & have a square section. Cube legs are available for work top level 750 mm from base.Wire Tray with integrated power box & switch plate (8+3 Anchor Roma). Soft closing access flap with brush.Metal modesty: Metal modesty is made from 0.8 mm thick CRCA. Metal modesty are mounted on the worktop with the help of the modesty mounting brackets made of 3 mm thick HRScreen: 18mm thk T mold Fabric screen on studs is providing on table top.Worktop: 25mm thk prelaminated partical board with pvc lipping.
1003	Executive Office Table with ERU side unit and Pedestal ( Providing Godrej or equivalent ) Model- GrandeurTable- 2400x900x740 ERU- 1200x450x610 MAIN WORKTOP :Made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All edges are edge banded with matching 1mm thick veneer lipping.LEATHER PAD:Made of 18mm Thick (±1) MDF with Leatherette wrapped around top surface. This leather pad is fixed to main top panel.Drawer Unit:Top panel and drawer unit modesty panel is made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All thickness edges are edge banded with matching lipping.Remaining construction is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Bottom panel of drawer is 9mm thick particle board with leatherette on top surface.Drawer unit is provided with soft closing channels for smooth opening and closing. Drawer unit is secured with side central lock.MODESTY:Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Modesty is fitted with aluminum trims.ERU WORKTOP :Made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All thickness edges are edge banded with matching lipping. UNDERSTRUCTURE AND ERU HINGE DOOR UNIT:Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Door is fixed with soft closing hinges and handle is provided for ease of opening. ERU is secured with side central lock.ACCESS FLAP WITH POWER BOX:
1004	Chair Mid BackModel- oxbo ( Providing Godrej or equivalent )SEAT ASSEMBLY: The seat assembly should bemade up of 1.2 ±0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D).BACK ASSEMBLY: The back asembly. should bemade of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should beupholstered using double layer spacer mesh fabric with high tenacity yarn.BACK SIZE : 46.5 cm (W) x 60.5 cm (H).HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should bemoulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgffor 25% compression.ARMRESTS: The one-piece armrests should beinjection moulded from black Co-polymer Polypropylene.CENTRE-TILT mechanism: The mechashould be m should bedesigned with the following features:• 360° revolving type.• 17° ±2° maximum tilt on pivot at centre• Upright position locking.• Tilt tension adjustment..PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm.TELESCOPIC BELLOW ASSY: The bellow should be3 piece telescopic type and injection moulded in Black Polypropylene.PEDESTAL ASSEMBLY: The pedestal should beinjection moulded in black 33% glass-filled Nylon66 and fitted with 5 No. twin wheel castors. The pedestal should be66.3 ±0.5cm. pitch- center dia. (76.3 ±1.0cm with castors.)TWIN WHEEL CASTORS: The twin wheel castors should beinjection moulded in black nylon.
1005	Office Chair Visitor ( Providing Godrej or equivalent )Model- Oxbo VisitorSEAT ASSEMBLY: The seat assembly should bemade up of 1.2 ±0.1cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D)BACK ASSEMBLY: The back asembly. should bemade of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should beupholstered using double layer spacer mesh fabric with high tenacity yarn.BACK SIZE : 46.5 cm. (W) x 60.5cm. (H)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should bemoulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgffor 25% compression.ARMRESTS: The one-piece armrests should beinjection moulded from black Co-polymer Polypropylene. .TUBULAR FRAME: The powder coated (DFT 40-60.microns) tubular frame should becantilever type & made of Ø2.54 ±0.03cm. x 0.2 ±0.016cm thick M.S.E.R.W. Tube.
1006	Sofa 3 SeaterModel- PISA ( Providing Godrej or equivalent )SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette.BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major kNots & surface defects. 6 No. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose.LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.
1007	Centre TableModel- Alice ( Providing Godrej or equivalent )Overall Size :Width : 100cm Depth : 65cm Height : 45cmTABLE LEGS METERIALS:Color :cherry,TABLE TOP MATERIALS & SIZE : (tempered Glass/ 10mm), L X W X T : 1000x650x10mm Color : clearFINISHING:MDF + PU
1008	Corner TableModel- Meraki ( Providing Godrej or equivalent )Overall Size : Width : 120cmDepth : 60cm Height : 36.7cm Materials : All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness.Drawer bottom is made of .9 mm thick prelaminated particle board .Drawer front is made of 18 mm thick PU painted MDF . Legs : Rubber wood . Hardware : Hettich . Construction : KNockdown .Finish :All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band. PU lamination is high gloss in Ecru shade .Packets : 1 No . Materials : All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness. Hardware : Hettich . Construction : KNock down .Finish : • All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band . PU lamination is high gloss in Ecru shade .Packets : 1 No
1009	Reception Table Model- Reflection 1500W X 725D X 740HRIVIERA QAK, GREYSTONE DARK ( Providing Godrej or equivalent )Work Surface:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management.WireManagement: Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8+3 Modulecutout provision for Anchor Roma). This is fixed with worktop along the width at Access Flap positionModesty Panel&Side Skirting: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.
1010	L Shaped Sofa (6 Seater) ( Providing Godrej or equivalent )Model- Arcade 6 Seater
1011	Office ChairModel-Pulse Mid Back ( Providing Godrej or equivalent )SEAT/BACK ASSEMBLY: The seat is made up of 1.2 ± 0.1cm thk. hot pressed plywood measured. The Back is made up of injection moulded glass filled polypropylene & upholstered using Net fabric with high tenacity yarn.SEAT SIZE(Larger Seat Depth) {PULSAL}: 47.0 cm. (W) x 51.5 cm. (D) BACK SIZE (PULSAX,PULSAL): 45.0 cm. (W) x 65.3 cm. (H)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density =55+/-2 kg/m3 and hardness 16 ± 2 kgf as per IS:7888 for 25% compression.ARMRESTS (ADJUSTABLE){PULSAX, PULSAL}: The armrests Have an Up-Down adjustment of 8.5± 0.5cm which is Provided in armrest structur. Armrests top has an integrated layer of Thermoplastic Elastomer (TPE)..LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad.The Height of Lumbar pad can be adjusted through two projecting kNobs provided on the rear side of the pad. Lumbar pad has an adjustment of 8.0 ± 0.5 cm in height.FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features.•360° revolving type.•Single point control.•Front-pivot for tilt with feet resting on ground ensuring more comfort.•Tilt tension adjustment.•4-position locking with anti-shock feature.•Seat/back tilting ratio of 1:2.PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm.PEDESTAL ASSEMBLY: The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 No. twin wheel castors. The pedestal pitch-center dia is 066.1 ± 0.5 cm. (76.1 ± 1.0 cm. with castors).TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon.
1012	Conference Table - 15 Seater Model- Mingle UNITIZED4200 X 1500 X 740 ( Providing Godrej or equivalent )Work top--Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Soft closing dual access flap provided for access to power supply and data cables. Understructure-The Under-structure consists of mixture of 25mm and 18mm Pre-laminatedtwin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. ANodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics. The product has a kNock-down construction.Wire Management-A wire raiser made of 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and cables. A Power box with 2 cutouts on either sides for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables(eg. HDMI,VGA-A,etc).
1013	Conference Table - 12 Seater Model- MingleUNITIZED3600 X 1500 X 740 ( Providing Godrej or equivalent )Work top--Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Soft closing dual access flap provided for access to power supply and data cables. Understructure-The Under-structure consists of mixture of 25mm and 18mm Pre-laminatedtwin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. ANodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics. The product has a kNock-down construction.Wire Management-A wire raiser made of 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and cables. A Power box with 2 cutouts on either sides for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables(eg. HDMI,VGA-A,etc).
1014	Conference Table - 10 Seater Model- MingleUNITIZED3000 X 1150 X 740 ( Providing Godrej or equivalent )Work top--Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Soft closing dual access flap provided for access to power supply and data cables. Understructure-The Under-structure consists of mixture of 25mm and 18mm Pre-laminatedtwin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. ANodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics. The product has a kNock-down construction.Wire Management-A wire raiser made of 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and cables. A Power box with 2 cutouts on either sides for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables(eg. HDMI,VGA-A,etc).
1015	Conference Room ChairModel- Thrill Mid Back ( Providing Godrej or equivalent )SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded Polyurethane foam. The seat has extra thick foam on front edge to give comfort to popliteal area. The Back is injection moulded inglass filled Polypropylene which is upholstered with Mesh fabric.The back consist of adjustable lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 ±0.1 cm. The chair seat & back size areSEAT SIZE :53.5 cm. (W) x 51.0 cm. (D)MESH BACK SIZE : 51.0 cm. (W) x 70.0 cm. (H)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression.ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range)· Armrest top is mounted on Armrest structure made of glass filled Nylon· Armrest Top is PU moulded over glass filled Nylon insertCENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features:. 360° revolving type.· 3 position locking with anti shock mechanism.· Tilt tension adjustmentHEADREST: The Headrest sub-assembly is made up of injection moulded glass filled Polypropylene which is upholstered with moulded HR polyurethane foam and fabric. It has an adjustment of 4.0 ± 0.1cm & it is assembled over Thrill mesh back chair.The complete headrest assembly is retro fit to the main chair.
1016	Farmer Guest House Single Bed Model- Adriana2060 x 1130 MM( Providing Godrej or equivalent )Overall Size :Length - 2060.0 mm Width - 1131.0 ram Height - 945.0 mmMaterial:Bed Structure consist of metal frames made of MS Channels in 1.0 mm Thickness. Horizontal plinths and bottom plinth are made of 25 mm Thick Pre-laminated Particle Board. Head board is made of 18 mm thick Pre-laminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Tail board is made of 18 mm thick Pre-laminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it.Side rail is made of 18 mm thick Pre-laminated Particle board with imported H.D.F. foil wrapped decorative trims fixed on to it. Mattress panels of Bed are made of 18 mm thick Pre-laminated Particle Board with all the exposed edges are edge banded with 0.8 mm thick PVC edgebanding. Construction :KNock Down construction. Packets : 1 Bed in 1 packets.Finish :18 mm thick Pre-laminated Particle Board is in Walnut shade.Metal frames are powder coated in shade Mat Black to the thickness of 50 microns(+-10).
1017	Farmer Guest House Working Table Model- T31900 X 590 X 750( Providing Godrej or equivalent )Table - T 31 size shall be900 Widthx 590 Depthx 750 Height . The top panels shall be made from 18 +/- 0.5 mm thick Pre - laminated boards as per with 2 mm thick PVC edge banding on all sides . Understructure shall be made from 0.9 mm +/- 0.09 mm thick powder coated 50 microns (+/-10) CRCA MS. Tubular Frame shall besq. 25.4 +/- 0.3 mm x 1.2 +/- 0.096 mm thick MS ERW tube .Modesty panel shall be made from 1.0 +/- 0.09 mm thick powder coated 50 microns (+/- 10). The Storage shall be having shell 0.5 +/- 0.07 mm thick CRCA MS plus drawer tray 0.5 +/- 0.07 mmthick CRCA MS plus drawer front 0.8 +/- 0.1 mm thick CRCA MS . Also there should be 10 lever cam lock plus handles built in plastic.
1018	Farmer Guest House ChairModel- CLASSIC- Leatherite Cushion Chair with Armrest( Providing Godrej or equivalent ) SEAT/BACK ASSEMBLY: The seat and back should bemade from seasoned wood and plywood. The same should beupholstered with black synthetic leather and polyurethane foam.BACK SIZE: 46.0cm. (W) X 27.0cm. (H) SEAT SIZE: 46.0cm. (W) X 40.0cm. (D)ARMREST TUBE: The armrest tube should bemade of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S.E.R.W. tube and powder coated (DFT 40-60 microns).UNDERSTRUCTURE ASSEMBLY: The understructure assembly should bea cantilever type frame made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and powder coated (DFT 40-60 microns).
1019	Farmer Guest House Wardrobe Model- Storewel Plain1981H x 916W x 486D( Providing Godrej or equivalent )Storwel plain shall have an overall size of916mm(W)x486mm(D)x1980mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available.
1020	Sofa 2 SeaterModel- PISA Fabric ( Providing Godrej or equivalent )SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette.BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major kNots & surface defects. 6 No. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose.LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.
1021	Corner TableModel- Meraki ( Providing Godrej or equivalent )Overall Size : Width : 120cmDepth : 60cm Height : 36.7cm Materials : All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness.Drawer bottom is made of .9 mm thick prelaminated particle board .Drawer front is made of 18 mm thick PU painted MDF . Legs : Rubber wood . Hardware : Hettich . Construction : KNockdown .Finish :All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band. PU lamination is high gloss in Ecru shade .Packets : 1 No . Materials : All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness. Hardware : Hettich . Construction : KNock down .Finish : • All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band . PU lamination is high gloss in Ecru shade .Packets : 1 No
1022	TV UnitModel- Sienna TV Unit1500 W x 381 D x 2400 H MM ( Providing Godrej or equivalent )
1023	Dining Table- 4 Seater with ChairModel- Grande Pro ( Providing Godrej or equivalent )Overall Size : Length : 117cmWidth : 75cm Height : 2.6cmMETAL MATERIALS : (gauge +/- 0.1mm):Material:BOLT & WASHER,WOODEN MATERIALS : Material:SHEESHAM SOLID WOOD
1024	Wardrobe 2 DoorModel- Genesys 2D Wardrobe + Mirror Dark Walnut ( Providing Godrej or equivalent )Dimensions W x H x D (cm) - 88.1 x 191 x 54.5 Primary Material - Engineered WoodPrimary Material Subtype - Particle Board Finish Color - Cola RainWarranty - 1 Year Net Weight (kg) - 90
1025	Bed with Bed side table Model- Allura King Size2137 X 1885 MM ( Providing Godrej or equivalent )Dimensions (in cm)- Width - 188.8Depth - 213.5Height - 88Side Height - 30.5 MaterialBed Structure partly consists of metal frames made ofM.S. 25mm Square Pipes in 1.2 mm Thickness. Metal frames are powder coated in shade Matt Black to the thickness of 50 micron. Upper Headboard are made of 15mm thick Membrane pressed MDF of BS EN 622-1, E1 grade and 9mm thick Particle board of EN312, E2 grade.Bottom panels are of 9mm thick Prelaminated Particle Board of EN312, E2 grade with all the edges banded with 0.45 mm thick PVC edge banding and are kept loosely on floor with help of plastic bush under them.Tail board, Sideboard, Mattress panel, Lower headboard and other wooden panels of Bed are made of 15 mm thick Prelaminated Particle Board of EN312, E2 grade with all theedges banded with 1 mm thick PVC edge banding.High quality hardware\"s like KD fitting and dowels are used ConstructionKNock Down construction Packets1 Bed in 6 packets
1026	Scientist Accommodation 2 Seater Sofa Sofa 2 SeaterModel- PISA ( Providing Godrej or equivalent )SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette.BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major kNots & surface defects. 6 No. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose.LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.
1027	Corner TableModel- Meraki ( Providing Godrej or equivalent )Overall Size : Width : 120cmDepth : 60cm Height : 36.7cm Materials : All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness.Drawer bottom is made of .9 mm thick prelaminated particle board .Drawer front is made of 18 mm thick PU painted MDF . Legs : Rubber wood . Hardware : Hettich . Construction : KNockdown .Finish :All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band. PU lamination is high gloss in Ecru shade .Packets : 1 No . Materials : All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness. Hardware : Hettich . Construction : KNock down .Finish : • All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band . PU lamination is high gloss in Ecru shade .Packets : 1 No
1028	TV UnitModel- Sparkle TV Unit Brown1850 H x 1350 W x 400 D MM( Providing Godrej or equivalent )
1029	Dining Table- 4 Seater with ChairModel- Grande Pro( Providing Godrej or equivalent )Overall Size : Length : 117cmWidth : 75cm Height : 2.6cmMETAL MATERIALS : (gauge +/- 0.1mm):Material:BOLT & WASHER,WOODEN MATERIALS : Material:SHEESHAM SOLID WOOD
1030	WardrobeModel- RIGA (Riga Pro 2Dr Wardrobe F.Wlnt)( Providing Godrej or equivalent )Dimensions W x H x D (cm) - 90.2 x 190.2 x 48.2 Finish Color - Fine WalnutPrimary Material - Solid Wood Sheesham Number of Drawers - 1Number of Shelves - 5 Net Weight (kg) - 103 Warranty - 1 YearStyle - Contemporary & Modern Delivery Condition - KNock Down
1031	Bed with Bed side tableModel- Grande Pro( Providing Godrej or equivalent )Overall Size :Length : 215cm Width : 194cm Bed Height : 42cmBed with Headboard Height : 87cmMETAL MATERIALS : (gauge +/- 0.1mm)material:BOLT.WOODENMATERIALS :material:SHEESHAM SOLID WOOD / PLY.Wooden Part Color: DARK BROWN.Metal part Color:BLACK
1032	MAIN TABLE - 1800 x 750,ERU - 900W X 600D- (Cabin) ( Providing Godrej or equivalent )# UPBEAT is a Modular desk based system of ht. 750 mm.Cube legs are fabricated by Argo Shield & have a square section. Cube legs are available for work top level 750 mm from base.Wire Management Single Power box with raiser for Manager Modules, Single tables (8+3 Anchor Roma). Soft closing access flap with brush.Metal modesty: Metal modesty is made from 0.8 mm thick CRCA. Metal modesty are mounted on the worktop with the help of the modesty mounting brackets made of 3 mm thick HR Worktop: 25mm thk prelaminated partical board with pvc lipping.
1033	Sofa 3 SeaterModel- PISA ( Providing Godrej or equivalent )SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette.BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major kNots & surface defects. 6 No. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose.LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.
1034	Corner TableModel- Meraki ( Providing Godrej or equivalent )Overall Size : Width : 120cmDepth : 60cm Height : 36.7cm Materials : All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness.Drawer bottom is made of .9 mm thick prelaminated particle board .Drawer front is made of 18 mm thick PU painted MDF . Legs : Rubber wood . Hardware : Hettich . Construction : KNockdown .Finish :All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band. PU lamination is high gloss in Ecru shade .Packets : 1 No . Materials : All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness. Hardware : Hettich . Construction : KNock down .Finish : • All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band . PU lamination is high gloss in Ecru shade .Packets : 1 No
1035	Dining Table- 4 Seater with ChairModel- Grande Pro( Providing Godrej or equivalent )Overall Size : Length : 117cmWidth : 75cm Height : 2.6cmMETAL MATERIALS : (gauge +/- 0.1mm):Material:BOLT & WASHER,WOODEN MATERIALS : Material:SHEESHAM SOLID WOOD
1036	Centre TableModel- Alice ( Providing Godrej or equivalent )Overall Size :Width : 100cm Depth : 65cm Height : 45cmTABLE LEGS METERIALS:Color :cherry,TABLE TOP MATERIALS & SIZE : (tempered Glass/ 10mm), L X W X T : 1000x650x10mm Color : clearFINISHING:MDF + PU
1037	Wardrobe 2 DoorModel- Genesys 2D Wardrobe + Mirror Dark Walnut ( Providing Godrej or equivalent )Dimensions W x H x D (cm) - 88.1 x 191 x 54.5 Primary Material - Engineered WoodPrimary Material Subtype - Particle Board Finish Color - Cola RainWarranty - 1 Year Net Weight (kg) - 90
1038	Reception Table Model- Reflection 1500W X 725D X 740HRIVIERA QAK, GREYSTONE DARK ( Providing Godrej or equivalent )Work Surface:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management.WireManagement: Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8+3 Modulecutout provision for Anchor Roma). This is fixed with worktop along the width at Access Flap positionModesty Panel&Side Skirting: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.
1039	Providing and fixing white european type wall-hung pan, of size 350mm x 355mm x570 mm concealed flush tank with floor-mounting frame installing kit and drain pipeconnection set for wall hung WC, with approved make square control plates including soil pipe, vent pipe upto the outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings,cutting & making good walls, floors etc. complete (Jaquar/hindware or equivalent make confirming green building certificate )
1040	Providing and fixing C.P. a 2-Way BIB cock with wall flange of approved makeincluding necessary sockets/ union nut etc. complete as directed by Engineer in charge.(Jaquar/hindware or equivalent make confirming green building certificate )
1041	C.P.Handshower (health faucet) 1m.PVC tube with wall hook jaquar make (Cat. No. ALD 563 )(Jaquar/hindware or equivalent make confirming green building certificate )
1042	Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete(Jaquar/hindware or equivalent make confirming green building certificate )
1043	Providing and fixing sink cock with regular swinging spout (Wall / floor Mounted Model) with wall flange having flow rate up to 6.0 Litr/Minute of Jaquar/Cera/Hindware/Perryware or equivalent make incluidng other necessary fitting, etc. complete as directed by Engineer in charge.( Make shall conform to manufacturer\"s Green product and shall got approved from the Engineer In Charge.)
1044	Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195mmsize with pillar cock, C.P.Angular stop cock, long thread of approved makecontinental including SS bottle trap of necessary pipe connection up to the outsideface of the wall, having Telephonic Black / Colour Granite of 180 mm thick fixedon Black Kadappa Framework, etc. Complete as directed by Engineer in charge(Jaquar/hindware or equivalent make confirming green building certificate )
1045	Providing and fixing wall mixer with overhead shower,shower arm,hand shower with wall bracket having flow rate up to 12 liters/minutes of Jaquar/Cera/Hindware /Perryware or equivalent make including all necessary pipes,fittings etc.complete as directed by Engineer In Charge.( Make shall conform to manufacturer\"s Green product and shall got approved from the Engineer In Charge.)
1046	Providing and fixing Table top white wash basin of size 120x635x405mm rubber plugs and brass chain, with pillar cock, C.P.Angular stop cock long thread, continentalincluding S.S. bottle trap of approved make having necessary pipe connection up to theoutside face of the wall.etc complete as directed by Engineer in charge.(Jaquar/hindware or equivalent make confirming green building certificate )
1047	Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets/union nut etc. complete.
1048	Providing and fixing white glazed urinal with Pressmatic auto closing valve having flow rate up to 4.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalent make with P.V.C. waste pipe with fitting arrangement etc.complete as directed by Engineer in charge.( Make shall conform to manufacturer\"s Green product and shall got approved from the Engineer In Charge.)
1049	Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mmdia. nickel plated towel rod etc. complete.(Jaquar/hindware or equivalent make confirming green building certificate )
1050	Providing and fixing on walls/ ceiling/ floor 50 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.(Jaquar/hindware or equivalent make confirming green building certificate )
1051	Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures andfitting such as bends, tees, single junctions, slotted vent, clamps etc. complete(Jaquar/hindware or equivalent make confirming green building certificate )
1052	Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures andfitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.(Jaquar/hindware or equivalent make confirming green building certificate )
1053	Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One No. ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.(Jaquar/hindware or equivalent make confirming green building certificate )
1054	Providing and fixing ISI 1729/2002 grade 75 mm dia Cast Iron Waste Water Pipe with lugs necessary fittings such as bends, tees, single junction, double junction, slotted vent, offsets on wall or into the ground including filling joints with cement mortar 1:2 proportion fixing on wall by means by galvanised Mild Steel bracket of 30 x 5 mm plate and 8 mm square rod with Galvanised Iron clamp with washer as per design drawing and as directed to keep pipe 50 mm away from wall including necessary scaffolding and painting the exposed faces with one coat of red lead oil paint and two coats of gray oil paint including removing the existing pipe if necessary and conveying and stacking in PWD Chowky or as directed by Engineer-in-Charge.(Jaquar/hindware or equivalent make confirming green building certificate )
1055	Providing and fixing ISI 1729/2002 grade 100 mm dia Cast Iron Soil Pipes With lugs including plug bend necessary fittings such as bends, tees, single junction, double junction, slotted vent, offsets on wall or into the ground including filling joints with cement mortar 1:2 proportion fixing on wall by means of galvanised Mild Steel bracket of 30 x 5 mm plate and 8 mm square rod with Galvanised Iron clamp with washer as per design, drawing and as directed to keep pipe 50 mm away from wall including necessary scaffolding and painting the exposed faces with one coat of red lead oil paint and two coats of white oil paint including removing the existing pipe if necessary and conveying and stacking in PWD Chowky or as directed by Engineer-in-Charge.(Jaquar/hindware or equivalent make confirming green building certificate )
1056	Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete (Jaquar/hindware or equivalent make confirming green building certificate )
1057	Providing and fixing on walls/ ceiling/ floor 20 mm dia. CPVC pipe with necessaryfittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete
1058	Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessaryfittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete(Jaquar/hindware or equivalent make confirming green building certificate )
1059	Providing and fixing on walls/ceiling/floor 20 mm dia. uPVC pipe with necessaryfittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. BD.V 5 page 551 and as directed by Engineer in charg(Jaquar/hindware or equivalent make confirming green building certificate )
1060	Providing and fixing on walls/ceiling/floor 25 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.(Jaquar/hindware or equivalent make confirming green building certificate )
1061	Providing and fixing on walls/ceiling/floor 32 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.(Jaquar/hindware or equivalent make confirming green building certificate )
1062	Providing and fixing on walls/ceiling/floor 40 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.(Jaquar/hindware or equivalent make confirming green building certificate )
1063	Providing and fixing on walls/ceiling/floor 50 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.(Jaquar/hindware or equivalent make confirming green building certificate )
1064	Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification No. FF-FFA/ARV(Jaquar/hindware or equivalent make confirming green building certificate )
1065	Providing and laying in trenches 40mm dai. uPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete(Jaquar/hindware or equivalent make confirming green building certificate )
1066	Providing and laying in trenches 50 mm dai. uPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.(Jaquar/hindware or equivalent make confirming green building certificate )
1067	Supplying and erecting 65 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification No. FF-VL/BFV (Jaquar/hindware or equivalent make confirming green building certificate )
1068	Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification No. FF-VL/BFV (Jaquar/hindware or equivalent make confirming green building certificate )
1069	Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 16 mm for solar water heater/AC system.
1070	Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use)
1071	Providing and fixing 10 cm PVC nahani trap with grating etc. complete(Jaquar/hindware or equivalent make confirming green building certificate )
1072	Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete(Jaquar/hindware or equivalent make confirming green building certificate )
1073	Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.(Jaquar/hindware or equivalent make confirming green building certificate )
1074	Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete(Jaquar/hindware or equivalent make confirming green building certificate )
1075	Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.(Jaquar/hindware or equivalent make confirming green building certificate )
1076	Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.(Jaquar/hindware or equivalent make confirming green building certificate )
1077	Providing and fixing screw down for 50 mm dia. wheeled stop tap of brass including necessary sockets/ union nut complete.(Jaquar/hindware or equivalent make confirming green building certificate )
1078	Supplying and erecting 75/80 mm dia cast iron double flange NRV completewith PN16 pressure rating, as per specification No. FF-VL/NRV(Jaquar/hindware or equivalent make confirming green building certificate )
1079	gun metal 40mm dia, horizontal water type Nonreturn valve conforming to IS 778and tested toa pressure Not less than 15 Kg/Sq.cm, Includingrubber gasket, flanges, union, nuts, bolts & washers complete as required., for all leads and lifts, testing(Jaquar/hindware or equivalent make confirming green building certificate )
1080	Providing and Fixing toilet set for differently abled persons consist of Floor Mounted white vitreous china water Closet including 6 litre capacity white vitreous china flushing Cistern with raised soft-push button, white vitreous china wash basin of size 46 x 36 cm and one No SS 304 hinged rail 76 cms & three No SS 304of (Grab Bar) 60 cms all including cutting and making good the walls and floors wherever required ,seat cover, cistern & wash basin fittings,nuts, bolts and gasket etc complete as per the direction of Engineer-In-charge.(Jaquar/hindware or equivalent make confirming green building certificate )
1081	Providing, laying, jointing and testing S&S Centrifugally Cast Ductile Iron double chamber Class K-9 pressure pipes conforming to IS : 8329:2000 with restrained joints (bolt less), all complete. 18.7. 100mm Dia
1082	150mm Dia
1083	200mm Dia
1084	Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) 80mm Dia
1085	100mm Dia
1086	200mm Dia
1087	Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 : 80mm Dia
1088	100mm Dia
1089	200mm Dia
1090	Providing, constructing and fixing 600 mm dia. Inspection chamber made up of Polypropylene / polyethylene material Having 315 mm diameter inlet(s)/outlets and with eccentric reducers as per requirement to connect 160 mm and 200 mm pipes having thickness of 5 mm and 600 mm in height, with inbuilt shaft achieve the invert depth as per site condition of wall thickness of 5 mm having R.C.C. cover and frame fixing in 150 mm thick in c.c.1:2:4, having crushed sand bed of 150 mm thick of size 750 mm dia. Including excavation and refilling the sides of chamber by sand crushed cushioning 150 mm thickness, connecting all required UPVC fittings with rubber lubricant etc.complete.
1091	Supplying & erecting cast iron double flange butterfly valve of size 100 mm dia. complete as per specification No. FF-VL/BFV.
1092	Supplying and erecting 100 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification No. FF-VL/ELS
1093	Providing , laying and fixing ,jointing Eco- drain 110 mm SN 8 Nu Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete.
1094	Providing , Laying and fixing, jointing Eco Drain 250 mm SN-04 Nu-Drain Upvc pipe or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 &16098 with fittings such a bends, tees, coupler, etc. jointing with rubber lubricant,including necessary excavation, trench refilling with selective excavated material etc. complete.
1095	Providing , Laying and fixing, jointing Eco Drain 315 mm SN-04 Nu-Drain Upvc pipe or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 & 16098 with fittings such a bends, tees, coupler, etc. jointing with rubber lubricant, including necessary excavation, trench refilling with selective excavated material etc. complete.
1096	Providing and laying concrete pipes of I.S.NP. class of 225mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
1097	Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
1098	Providing and laying Non-presure NP2 class (light duty) R.C.C.pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 450 mm dia. R.C.C. pipe
1099	600 mm dia. R.C.C. pipe
1100	1000 mm dia. R.C.C. pipe
1101	Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm Nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm Nominal size) finished with a floating coat of neat cement, all complete as per standard design :
1102	1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be Not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm Nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m :
1103	Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm Nominal size) complete as per design
1104	Providing and laying in trenches 50 mm dai. uPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
1105	Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete
1106	Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.
1107	Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.
1108	Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.
1109	Providing and fixing screw down for 50 mm dia. wheeled stop tap of brass including necessary sockets/ union nut complete.
1110	Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification No. FF-VL/BFV
1111	Supply, Installation, Testing and Commissioning of HDPE irrigation pipes as per IS 14151 (Part 1) : 1999, Class 3 (0.4 Mpa) pressure rating, ISI marked with related accessories like couplers, adapters elbows etc as per consultants drawing laid in place including excation if any of following diameters: 110mm
1112	80mm
1113	65mm
1114	50mm
1115	40mm
1116	32mm
1117	20mm
1118	16mm
1119	Supply, Installation, Testing and Commissioning of Dripper Nozzels, PVC adjustable from 4 LPM to 8 LPM flow rate, ISI marked
1120	Supply, Installation, Testing and Commissioning of Sprinkler Nozzels, PVC adjustable from 6 LPM to 12 LPM flow rate, ISI marked
1121	Supplying & erecting Dewatering Submersible pump set for Irrigation water supply of 415V, 3 phase, 50C/s, A.C., IE3 motor, supply of 3 KW/ 3 H.P., of 30 m head (1 working + 1 supporting) with 300 LPM discharge, Non-clogging minimised abrasive wear, large impeler clearance & maintenance free pump set with water proof cable duly sealed with epoxy material built in protection to prevent the motor from burn out due to abNormal operation. specially designed high efficiency motor (IE3+) with F class insulation & the pump mechanically sealed in the oil chamber, including conttrol panel with BMS compatibility. etc. complete
1122	SoleNoid Valve 50mm Dia, with level sensors to shut off valve when tank gets full, control panel, related cabling etc complete
1123	Providing and constructing Brick Masonry Electrical Chamber 120cm x 120cm x 120cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete.
1124	Constructing grit chamber and grease trap chamber in brick masonry as indicated in consultants drawing, up to 1 m deep, (1.5 x 1.2x 1 and 1.0x 1.2x 1) withfirst classbricks in cement mortar 1:5 R, FRP covers (heavy duty 20T), foundation concrete 1:4:8 mix , inside and outsideplastering12mm thickwithcementmortar 1:3 finished with afloatingcoatofneat cement inside with rounded corners in cement concrete 1:2:4 mix neatly finished complete as perstandard design including excavation, refilling and disposalof surplus earth.
1125	Constructing Stormwater channel with RRM stone masonry in cement mortar 1:5foundation concrete 1:3:6 mix, raking RRM joints and cement grouting as perstandard design including excavation refilling anddisposalof surplus earth, providing and securely fixing CI frame in RRM and CI grating (heavy duty) etc. complete. (CI grating and frame Make: NECO or equivalent) 300mm wide channel, 300mm deep at start with 1:200 slope, Heavy Duty CI grating and frame
1126	Constructing Stormwater channel with RRM stone masonry in cement mortar 1:5foundation concrete 1:3:6 mix, raking RRM joints and cement grouting as perstandard design including excavation refilling anddisposalof surplus earth, providing and securely fixing CI frame in RRM and CI grating (heavy duty) etc. complete. (CI grating and frame Make: NECO or equivalent) 600mm wide channel, 300mm deep at start with 1:200 slope, Heavy Duty CI grating and frame
1127	Constructing Stormwater channel with RRM stone masonry in cement mortar 1:5foundation concrete 1:3:6 mix, raking RRM joints and cement grouting as perstandard design including excavation refilling anddisposalof surplus earth, providing and securely fixing CI frame in RRM and CI grating (heavy duty) etc. complete. (CI grating and frame Make: NECO or equivalent) 900mm wide channel, 300mm deep at start with 1:200 slope, Heavy Duty CI grating and frame
1128	Constructing Stormwater channel with RRM stone masonry in cement mortar 1:5foundation concrete 1:3:6 mix, raking RRM joints and cement grouting as perstandard design including excavation refilling anddisposalof surplus earth, providing and securely fixing CI frame in RRM and CI grating (heavy duty) etc. complete. (CI grating and frame Make: NECO or equivalent) 1200mm wide channel, 300mm deep at start with 1:200 slope, Heavy Duty CI grating and frame
1129	Supply, installation, testing, and commissioning of the electrical trench, with dimensions of 1300mm length, 1300mm width, and 1300mm depth, which includes a cover at every 15-meter interval, and also includes all necessary civil work to complete the electrical trench.
1130	Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
1131	Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.
1132	Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
1133	Supplying and erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
1134	Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
1135	Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
1136	Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
1137	Supplying and erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
1138	Supplying and erecting mains with 1x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
1139	Supplying and erecting mains with 2x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
1140	Supplying and erecting mains with 1x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
1141	Supplying and erecting mains with 4x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
1142	Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.
1143	Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.
1144	Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete
1145	Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
1146	Supplying and erecting modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.
1147	Supplying and erecting modular type buzzer 220 / 250V, duly erected on provided plate and box with wiring connections complete.
1148	Supplying and erecting modular type (two module) electronic step regulatorfor fan, duly erected on provided plate and box with wiring connections complete.
1149	Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected.
1150	Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected.
1151	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
1152	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
1153	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
1154	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
1155	Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG_x0002_PW/CW
1156	Point wiring for ceiling fan concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/CW
1157	Point wiring for independent plug, concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No WG-PW/SW
1158	Point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch,
1159	Point wiring for ceiling fan (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/HW
1160	Secondary point wiring for additional light/ bell point, concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW
1161	Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG
1162	Supplying & erecting co-axial copper cable low voltage grade tri-shielded RG_x0002_6 as per specification No. WG-TW
1163	Supplying and erecting LED square / circular Max. 11 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1200 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
1164	Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
1165	Supplying and erecting LED Panel Light(600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty
1166	Making suitable size recess in any type of false ceiling for erection of flush type down lighter and finishing the background to match the original surface upto 20W.
1167	Making suitable size of recess in any type of false ceiling for erection of flush type LED panel light 600mm x 600mm/1200x300mm and finishing the background to match the original ceiling surface.
1168	Supplying and erecting aNodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.
1169	Supplying & erecting 3W, 230V integral type LED Lamp suitable for B-22 / E_x0002_27 base.
1170	Supplying & erecting 5W-7W, 230V integral type LED Lamp suitable for B-22 /E-27 base.
1171	Supplying & erecting 18W, 230V integral type LED Lamp suitable for B-22 / E_x0002_27 base
1172	Supplying and erecting regular/ standard model ceiling fan of 900 /1050 mm. sweep complete erected in position as per specification No. FG-FN/CF
1173	Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.
1174	Supplying and erecting energy saving ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification No. FG-FN/CF
1175	Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to theR.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thickaluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depthupto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.
1176	Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.
1177	Supplying and erecting storage type water heater 15 litres capacity having standing loss <0.419 kWh / 24 hour / 45°C, high impact resistance engineering plastic body with anti corrosive high grade steel inner tank heating element having hard water & corrosion protection, with minimum 3 safety protections (i.e. thermostat & thermal cut-out, multi function valve) with total pressure 8 bar withstanding capacity duly tested and marking sr. No. and date of erection complete. specification No. AP-WH/STWH
1178	Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification No. SW-SWR/MCB
1179	Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification No. SW-SWR/MCB
1180	Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification No. SW-SWR/MCB
1181	Supplying & erecting triple pole and neutral distribution board (TPNDB),SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness,surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification No. SW-SWR/MCBDB
1182	Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification No. SW-SWR/MCBDB
1183	Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 12 ways /phase (36 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification No. SW-SWR/MCBDB
1184	Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, withdoor, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification No. SW-SWR/MCBDB
1185	Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs,with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron /GI frame as per specification No. SW-SWR/MCBDB
1186	Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/ 4 pole MCCB as incomer & outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification No. SW-SWR/MCBDB1
1187	Providing & erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, No line-load bias in provided enclosure/panel as per specification No. SW-SWR/MCCB
1188	Providing & erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, No line-load bias in provided enclosure/panel as per specification No. SW-SWR/MCCB
1189	Providing & erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, No line-load bias in provided enclosure /panel as per specification No. SW-SWR/MCCB
1190	Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification No. SW-RCCB/RCCB
1191	Supplying, fixing and commissioning 4 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification No SW-RCCB/RCBO
1192	Supplying, fixing and commissioning 4 pole RCBO 63A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification No SW-RCCB/RCBO
1193	Supplying and erecting terminal spreaders suitable for 4 pole, above 100A up to 250A MCCB (Set of 8)
1194	Supplying and erecting terminal spreaders suitable for 4 pole, above 250A up to 400A MCCB (Set of 8)
1195	Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for up to 250A MCCB.
1196	Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for above 250A up to 630A MCCB.
1197	Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding,riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.
1198	Supplying and erecting iron work, sheet metal work consisting of CRCA sheets,various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. Note:- 1) Quantity of iron/sheet metal work shall be considered and worked out as per steel data table. 2) For Fire retardant plywood increase rate by 25% 3) FR plywood with compliance to IS 5509:2000
1199	Supplying and erecting self-locking arrangement with keys in duplicate, made of brass of grade 1 compliance to IS 729-1979 duly erected, flush with surface of panel /cupboard
1200	Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 & Current Density 0.8 A per sq. mm. with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification No. BCP_x0002_ BB Note:- Nut, bolts holding the lugs to bus bar shall be of bimetallic/ brass/ cadmium plated steel
1201	Supplying and erecting Intelligent flush mounted panel meter three phase four wire (IPM) input voltage measurement range 50-550 V AC (P-P) 415V, aux. supply 90-300 V AC/DC, flush mounted (96 x 96 mm) meter constant Wh viewing in LCD multifunction meters in auto scroll mode with voltage, current,frequency, power factor kW, kVA, kVAR, kWh, kVAh, kVARh, phase angle,interrupts, THD, complete with RS 485 communication protocol, class 1 accuracy and wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer.
1202	Supplying and erecting selector switch suitable for voltmeter/ammeter for 3 phase AC supply 500V, 50Hz, on provided box / panel and duly connecting with necessary PVC wire leads and lugs.
1203	Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates
1204	Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow /green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.
1205	Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250V on provided box / panel with necessary material, wiring & connections etc
1206	Supplying, installation & marking of surge arrestor/ surge protection device at the sub main distribution board after the incoming breaker of type 2 tested for Imax 15 kA for three phase and neutral with compliance to IEC 61643-11 as per specification No. CP-SPDNote:- The above items shall be used only in installation where sensitive instruments are used and installations that are prone to surges.
1207	Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 35 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification No. CB-LT/AL
1208	Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 70 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification No. CB-LT/AL
1209	Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification No. CB-LT/AL
1210	Supplying and laying (including excavation of suitable width & depth up to 90 cm)75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
1211	Supplying and laying (including excavation of suitable width & depth up to 90 cm) 200 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
1212	Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification No.EA-EP
1213	Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and Non-corrosive bond with required joints As per specification No. EA-EP.
1214	Supplying, installing, testing and commissioning of Suitable capacity ON-GRID Solar PV System / Plant consisting Solar PV moNo Crystalline Panel (535 Wp) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate,caNopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB ,MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card / chip for 5 years including net charges for RMS System, complete up to net meter Installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract .
1215	Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.
1216	Supplying and erecting modular type computer Jack RJ45 with safety shutter, duly erected on provided plate and box with wiring connections complete.
1217	Supplying & erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW
1218	Supplying & erecting 100 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW
1219	Supplying & erecting 100 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW
1220	Supplying, erecting & commissioning MDF Box 100x100 pairs made from min. 1.5mm thick MS sheet as per specification No. WG-TW
1221	Supplying, erecting & commissioning 100 pairs M.S. junction box made from min. 1.5mm thick MS sheet as per specification No. WG-TW
1222	Supplying and installing, testing & commissioning of digital (hybrid) type EPABX of 6 x 32 extensions suitable upto 96 extensions complete.Add Rs. 38159.00 for additional 16 extension card for digital (hybrid) type EPABX
1223	Supplying, installing, testing & commissioning push button telephone instrument desk top unit as per specification complete
1224	Supplying, installing, testing & commissioning push button telephone instrument desk top/wall mount with caller ID & Speaker unit as per specification complete.
1225	Supplying and installing cat-6 cable suitable for networking as per specification No. WG-COC/NC
1226	Supplying and installing armoured single mode optical fibre cable with 6 fiber, core dia 50/125μm (OS1/OS2) 10/40 GBPS speed in provided underground HDPE pipe complete
1227	Supplying and erecting LSZH armoured multimode optical fibre cable with 12 fibres, core dia 50/125 µm (OM3), suitable up to 10 GBPS ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification No. WG-COC/OFC
1228	Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC
1229	Supplying and fixing 3 m UTP patch cord of Cat 6 type in position as perspecification No. WG-COC/PC
1230	Supplying and plugging 3 m fibre patch cord LC-SC MM (50) OM3 LSZH duplex complete as per specification No. WG-COC/FPC
1231	Supplying and installing single mode simplex pigtail with SC/LC splicing complete.
1232	Supplying and fixing IP66 enclosure for fibre splicing complete.
1233	Supplying, fixing, and configuring 24 ports with 4 (SFP+) port, ethernet managed switch with web view/CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification No. WG_x0002_NWC/GBS
1234	Supplying, fixing, and configuring 48 Ports managed gigabit switch 10/100/1000 Mbps + 4 SFP ports erected in provided rack complete.
1235	Supplying, fixing, and configuring 10G Base -SR (SFP+) simplex MM transceiver erected in provided rack complete.
1236	Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.
1237	Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification No. WG-NAS/PP
1238	Supplying and fixing SC/LC type multimode duplex adapter to couple two connectors between OFC & Fibre switch/Fibre module as per specification No. WG-NAS/MMA
1239	Supplying and fixing Power Distribution Unit for networking rack comprises of 6/16A (6 No. sockets), 25 A modular MCB, appropriate rating fuse and indicator lamp, enclosed in black powder coated metal with necessary arrangement for fixing as per specification No. WG-NAS/RAK
1240	Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK
1241	Supplying and fixing 12U wall mount rack (Dimension-DxWxH – 500x600x635 mm) as per specification No. WG-NAS/RAK
1242	Supplying and fixing manageable wireless 2x2 Mesh Router, 50 m range, dual_x0002_band 802.11 n/ac unified wireless access point complete as per specification No. WG-NAS/LAP1
1243	Supplying & erecting of High definition 4/5 Megapixel IP IR Dome Camera with following features Image Sensor : minimum 1/2.8\" Progressive Scan CMOS, Video Resolution : minimum 2592 x 1520 Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View : 2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129° 4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102° 6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65° Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0 Lux (IR) Night Vision Distance minimum IR - 50m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 - Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of minimum 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation. Events : Privacy Masking, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection. Operating temperature ( -30 to 60° C ) . Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES - 256, SSH/Telnet closed, FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP, SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour, SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified. duly erected in position on wall/ceiling/false ceiling/provided pole (mounting height Not more than 5 meter) etc with all accessories etc complete as per specification No. CCTV-CAM.
1244	Supplying & erecting of High definition 4/5 Megapixel IP IR varifocal Bullet Camera with following features Image Sensor : minimum 1/ 2.8\" Progressive Scan CMOS, Video Resolution : minimum 2592 x 1520 Video compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame Rate : minimum 25 fps at all resolutions. WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, Lens Type: 2.8 - 13mm Lens, auto/motorized varifocal focal, Field of View : horizontal FOV 103° to 32°, vertical FOV 73° to 24°, diagonal FOV 142° to 40° Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0 Lux (IR) Night Vision Distance Min IR- 50m, Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 – Vandal Resistant, built in micro SD/SDHC/SDXC card slot of min 128 GB, built in microphone. minimum Input/Output- Audio in × 1, Audio Out × 1 , Alarm in× 1, Alarm Out × 1. Image Settings: Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements: Day/ Night-Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation. Events: Privacy Masking, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection. Operating temperature ( -30 to 60° C ) . Security- User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES-256, SSH/Telnet closed, FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP, SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour, SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified. duly erected in position on wall/ceiling/false ceiling/provided pole (mounting height Not more than 5 meter) etc with all accessories etc complete as per specification No. CCTV-CAM.
1245	Supplying & erecting of High definition 4/5 Megapixel IP IR PTZ Camera with following featuresImage Sensor : minimum 1/2.8\" Progressive Scan CMOSVideo Resolution: minimum 2880 x 1620 Video Compression : H.264, H.265 or higher, at least Three individuallyconfigurable stream,Frame Rate : minimum 30 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant. Auto Tracking, Pre-set Tour Settings, Pan : 360° endless, Tilt : From -15° to 90°(auto-flip 180°), minimum Pan Speed - from 0.1°/s to 160°/s, minimum PresetSpeed: 240°/s, minimum Tilt Speed - from 0.1°/s to 120°/s, minimum PresetSpeed : 200°/s, Min Presets- 250, Min IR distance :150m, Lens Type : minimum 4.3 - 12.5mm Lens min 16 x digital zoom, min 30 xoptical Zoom. Focus Mode : Auto/Zooming/One Push Manual, Lux sensitivity- minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White,0.0 Lux (IR) Night Vision Distance Min IR- 150m, Power Supply : support 12/24 VDC, 24 VAC & PoE, IP67/IP66, IK10, built in micro SD/SDHC/SDXC card slot minimum 256 GB, built in microphone. minimum Input/Output : Audio in × 1, Audio Out × 1, Alarm in× 1, Alarm Out× 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain,white balance. Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation. Events : Privacy Masking, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection,Region exiting detection. Operating temperature ( -30 to 60° C ) . Security : User account and password protection, HTTPS, IP filter, IEEE 802.1X,digest authentication, user access log, TLS1.2, AES-256, SSH/Telnet closed, FTP disabled. Protocol-DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP,SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP),Bonjour,SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified.duly erected in position on wall/ceiling/false ceiling/provided pole (mounting height Not more than 5 meter) etc with all accessories etc complete as per specification No CCTV-CAM.
1246	Supplying, installing, testing & commissioning of 8/10 Ch. Network Video Recorder (NVR), suitable for 2 MP cameras only with HDMI/VGA outputs provided HDMI output of 4K resolution or VGA output with output up to1920x1080. Support H.265 or higher, H.264, MJPEG, Incoming Bandwidth 80Mbps with minimum 2 SATA Hard Disks, ANR TechNology, 2 SATA interfaces for 2 HDDs and capacity of each HDD up to 8TB, minimum 02 USB port, Alarm I/O 4/1, RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, support multi brand network Cameras, ONVIF conformance, Multiple network monitoring: Web viewer . support protocol TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS,iSCSI, UPnP™, HTTPS. RoHS, UL, CE, FCC certified.duly erected in provided U Rack with wiring connections, tagging and programming etc complete as per specifications No. CCTV-NVR
1247	Supplying, installing, testing & commissioning of 16/20 Ch. Network Video Recorder (NVR), suitable for 2 MP cameras only with HDMI/VGA outputs provided HDMI output of 4K resolution or VGA output with output up to 1920× 1080. Support H.265 or higher, H.264, MJPEG, Incoming Bandwidth 160Mbps with minimum 2 SATA Hard Disks, ANR TechNology, 2 SATA interfaces for 2 HDDs and capacity of each HDD up to 8TB, minimum 02 USB port, Alarm I/O 4/1, RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, support multibrand network Cameras, ONVIF conformance, Multiple network monitoring: Web viewer. support protocol TCP/IP, DHCP,DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™, HTTPS. RoHS, UL, CE, FCC certified.duly erected in provided U Rack with wiring connections, tagging and programming etc. complete as per specifications No. CCTV-NVR
1248	Supplying & erecting 8 TB internal Surveillance HDD suitable for SATA Port of NVR, interface transfer rate 6 GB/S, maximum sustained transfer rate 210 MB/Sec to 213 MB/S. Drive bay supported 08+, Cameras supported up to 64, Cache (MB) 256, Load/Unload Cycle -3000000, Work Load Rating per Year 180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected in position in provided NVR as per specification No. CCTV-HDD
1249	Supplying & erecting 65\" professional LED display with 1920 *1080 ( Full HD) Display, suitable for 64 channel NVR and following features Brightness: minimum 500 Cd/m2 Contrast Ratio: minimum 1000:1 Viewing angle: 178/178 deg. Response time: maximum 8 ms Inputs: HDMI, VGA, BNC,USB, Audio In, Built-in speakers maximum 10 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete as per specifications No. CCTV-MON
1250	Supplying, erecting testing and commissioning beam smoke detector four wiresingle ended reflected type with 8 \" receiver having digital display for easy alignment, adjustable sensitivity & heater kit for transmitter/receiver and reflector with necessary connections on suitable back box. The protection range of beam detector is 5 to 70 m.
1251	Supplying, installing, testing and commissioning remote response indicators suitable to operate on 5 - 28 V dc supply having FR Polymer ABS Housing complete as per specification No. FF-FAAS/RRI
1252	Supplying, installing, testing and commissioning FRLS, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification No. CB-LT/CU
1253	Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 2 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in Normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, IS 2189: 2008, EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty FF-AFAS/CP.
1254	Supplying, installing, testing and commissioning of repeater panel with suitable battery backup of a minimum of 24 hours in Normal condition and 30 min in alarm condition, 80 backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel size shall Not more than 175 x 275 x 65 mm conforming to EN 54 or UL approved with 3 years equipment replacement warranty FF-AFAS/RP
1255	Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or UL Approved with 3 years equipment replacement warranty FF_x0002_AFAS/SD
1256	Supplying, installing, testing and commissioning of intelligent addressable thermal/heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from -20°C to 38°C for fixed-heat and rate-of-rise type detectors and 0°C to 66°C for high heat type detectors, in built isolation mode, suitable for offices/ceiling cable trenches/less ventilation area\"s etc. with 3 years equipment replacement warranty IS : 2175 - 1988 reaffirmed 2000, IS 15908:2021 standards FF-AFAS/SD.
1257	Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with \"Break Glass\" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listed with 3 years equipment replacement warranty FF-AFAS/MCP.
1258	Supplying, installing, testing and commissioning of addressable fire control/relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 reed relays, EN 54 or UL Listed FF-AFAS/CRM
1259	Supplying, installing, testing and commissioning of addressable fire monitor module complete as required. EN 54 or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/MM
1260	Supplying, installing, testing and commissioning of addressable fire isolator module complete as required. EN 54 /FM or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/ISM
1261	Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty FF-AFAS/SSH.
1262	Supplying, erecting, testing and commissioning stand mounted/handheld type wired microphone having 2 mV/Pa sensitivity, impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to +55 deg C with min. 7 metre shielded cable and 3 Pin Professional XLR Connector, stereo jack complete as per specification No. FF-PA/MIC
1263	Supplying, erecting, testing and commissioning of 1.5 sq. mm speaker wire Complete.
1264	Supplying, erecting, testing and commissioning PA Mixer 10 channel with MP3 Player with USB/SD card reader and Bluetooth facility, 48V Phantom Supply on 4 Channels, 8 MIC/LINE Balanced MoNo input channels, 1 Stereo balanced input channel in 2 selectable sensitivities of -10dBu & +4dBu, Frequency Responce : 25Hz - 20kHz,Impedance : 600Ω,Signal to Noise ratio : >70dB,Operates on 240V 50Hz AC supply, built-in Digital Effects processor with Delay, Repeat and Level controls. Each input channel has a GAIN control, 3 band active Equalizer controls, a Pre-fader AUX1 control, a Post-fader AUX2 /EFX control & a PAN control, STEREO channel has a GAIN control, 2 band active Equalizer controls, AUX1 Pre fader control, AUX2/EFX Post fader control and a BALANCE control with Channel ON/OFF switch provided on each individual channel, complete as per specification No. PA-MXR
1265	Supplying,installing, testing & commissioning 2-Way flush mount Ceiling Speakers with input power 20W RMS power, with power taps on 20/10/5W, 100V & 70V line, frequency response 90-18000Hz, stylish metal mesh grill and plastic frame, operates on 100V line for excellent reproduction of both speech and music, wide frequency response and adjustable tweeter complete as per specification No. PA-FMCS
1266	Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 No. x0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV
1267	Supplying and erecting integrated LED street light fitting 60W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 6600 Lumens, min. efficacy of 110 lumen/W, CRI>70,CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.
1268	Supplying and erecting integrated LED street light fitting 100-110W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 11000 Lumens, min. efficacy of 110 lumen/W,CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.
1269	Supplying & erecting three phase, 415V, street light control panel up to the max load of 6kW, TPN MCB 40A, powder coated CRCA 14 SWG sheet,outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs.astroNomical time switch with minimum 5 years battery back up,auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protection on provided iron frame / CC foundation.
1270	Supplying & erecting three phase, 415V, street light control panel up to the max load of 12kW, TPN MCB 63A, powder coated CRCA 14 SWG sheet,outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs. astroNomical time switch with minimum 5 years battery back up, auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protection on provided iron frame / CC foundation.
1271	Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as per specification No. SW-SWR/MCB
1272	Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification No. CB-LT/AL
1273	Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification No. CB-LT/CU
1274	Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
1275	Providing & erecting 5 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification No. OH-PL/OPL.
1276	Providing & erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 200 mm A/F, top 100 mm A/F on provided foundation as per specification No. OH-PL/OPL
1277	Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification No. OH-PL/PBKT
1278	Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification No. EA-EP
1279	Supplying & erecting flat flexible 3 core 2.5 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.
1280	Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole).
1281	Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).
1282	Supplying and erecting integrated LED flood light fitting Max. 50W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 5000 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2.
1283	Supplying and erecting integrated LED round burial light 6W IP65 & IK10 class having pressure die-cast housing, having system lumens output of Min. 500 Lumens, min. efficacy of 85 lumen/W, CRI>80, CCT upto 6500K, THD0.90, operating range of 100-240V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L50B50, including driver, salt spray tested for 500 Hrs. including making of recess of appropriate size for flushing into surface with 2 Year warranty as per specification No FG-ODF/FLS2.
1284	Supplying and erecting of 07W LED UPLIGHTER (3000K): Die casting dark grey powder coated aluminum,T=60-80um.Adhesion of ISO class 1/ASTM class 4B,Tempered glass,T=4mm,PG-9,PA-66,molding shaped silicon double seal,Excellent heat conductivity aluminum,coefficientof heat conductibity>=90%,constant current output,optical reflector efficieny >=90%,operating temerature -20degree cel.-40 degree Cel. ABS spike 7a,lumen : 674 lm ,Beam - 25degree, IP -65 , IK -05
1285	Supplying and erecting of12W FOUR WAY BOLLARD (3000K) :Aluminium die-cast with color powder coating,Extruded aluminium body, LED optical reflector,Stainless steel fasteners in grade 316,Durable silicone rubber gasket,Clear toughened glass,Powder coating with high corrosion resistance with chemical chromatized protection Dark Grey RAL 7043,IP 65, Beam - 67 degree ,IK-08,lumen - 423lm
1286	Supplying and erecting of CarleySquare,LED 4000K, 230-240Vac CRI >80 MacAdam step 3,Input power : 40W,Height3500mm,Light Distribution360°,Electronic driver ON/OFF,CE and BIS LUMINAIRE TYPE,Light Column. IP rating IP65MATERIAL CHARACTERISTICS-Extruded aluminium bottom pipe (grade 6063 with test certificate) Sq. 150 x 3mm thickness, extruded aluminium stem with inner ribbed Sq.30 x 2mm thickness, extruded aluminium top pipe with inner ribbed. SS fasteners. Pre treated silicone gaskets. PDC aluminium service door 330mm height x 75mm width at 335mm height above the base plate shall be provided with the company logo embossed on the bottom of the door and safety rope. The control gear tray is prewired with 2.5 Sq.mm cable, 6A MCB and 32A terminal connectors for loop-in / loop-out arrangement.MS mounting plate Sq. 250 x 12mm thick steel of grade E250 to IS 2062:2011 with 4 elongated holes 38 x 19 to suit M16 bolts at CC180. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation pole. Hot dip galvanised foundation bolt. Mechanical resistance IK08.Pure polyester powder coated process : Mild shot blast & pure polyester powder coating. LIGHTING PERFORMANCE-Optical grade clear toughened glass diffuser of 4mm thickness with controlled downward light emission. Lamp fixed position.CARLEYSQUARE This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire > 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency >87%, power factor >0.95, THD <10%, Surge protection 5KV.
1287	Supplying and erecting of 12W LED Up & Down Lighter Low copper content Extruded & die-cast aluminium housing,Stainless steel fasteners in grade 316,Reflector : Mirror finish pure AL,Diffuser : Clear toughened glass,Mounting : Surface - Wall,Durable silicone rubber gasket,High efficiency optical reflector,Clear toughened glass,Single cable entry,Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. color code -02 dark grey RAL 7043,IP 65, Beam -36 degree,IK-08,lumen -775lm
1288	Supplying and erecting of 7W Circular surface Mounted Lightdownlighter fitting type (Primary Fitting) lumen output of led fitting - 1500 lumenColor temperature 4000 - 5700 kColour rendering index (cri) > 80
1289	Supplying and erecting of 6W Circular Recess Mounted Lightdownlighter fitting type (Primary Fitting)Color temperature 4000 - 5700 kColour rendering index (cri) > 80
1290	Supplying and erecting of 3W Circular surface Mounted Lightdownlighter fitting type (Primary Fitting) lumen output of led fitting - 1500 lumenColor temperature 4000 - 5700 kColour rendering index (cri) > 80
1291	Supplying and erecting of6W Path Finder (3000K) robust wall recessed luminaire for illuminating walls and stairs. Forward asymmetrical light distribution. Luminaire made of pressure die cast aluminium alloy of high corrosion resistance and Non corrosive A2 stainless steel fasteners. ABS plastic installation housing for preparing the recess opening in wall / stairs. Clear acrylic diffuser. Single cable entrance via M10 cable gland. Protection class IP65. Mechanical resistance IK09. Pure polyester powder coated RAL 9004 Signal black, RAL9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. Available colour temperature 2700K / 3000K / 4000K / 5700K, Colour rendering index (CRI)>80. K-Lite LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >85%, Power factor >0.90, THD <10%, Surge protection 2KV. Luminaire dimension : 255mm length x 87mm width x 76mm height. Luminaire installation in a recessed opening cut-out dimension : 240mm length x 83mm width x 70mm height. CE & BIS Certified. Inhouse NABL accredited lab.
1292	Supplying and erecting LED Strip light 5m Length Max. 12 W IP68 class having minimum lumens output of 240 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50, including driver with 1 year warranty.
1293	Supplying and erecting of 40W LED Wall Washer Luminaire made of extruded aluminium for better thermal management,Translucent polyurethane encapsulation,Surface mounting options,IP67 connector on both ends and can be easily installed via mounting clips or adjustable wall clamps,Constant voltage LED driver 24V Non integral (to be ordered separately),MacAdam LEDs < 3-step,High CRI80+,Dimmable,Special colour on request( Red,Green,Blue,Amber etc.)
1294	Supplying and erecting of 16.3 W/ Mtr LED STRIP PROFILE - (3000K) :Some LED modules are equipped with a self-adhesive tape for attaching the LED module to suitable materials, such as aluminum profiles, which must be clean and free of oil or silicone coatings, as well as other dirt/dust particles. The adhesive tape is intended for single use and if removed may damage the material to which it is stuck and the LED module itself, which must then be scrapped,Flexible and cuttable LED strip,Fine White (3 SDCM),Available lumiNous flux: up to 2,000 lm/m,Rated ambient temp 25°C/Providing that temperature at Tc point is below max value during operation/Temperature ramping for environmental testing acc. to IEC 62717, 1K/min,Beam Angle - 120°, IP:20 ,CRI >80,lumiNous flux per meter -1150lm ,QUANTITY IN METERS. RIGID ALUMINIUM CHANEL ALONG WITH DIFFUSER & CLAMPING TO BE PROVIDED. DRIVER TO BE PROVIDED FOR EVERY 5 MTRS.
1295	Supply and erecting ofOf FLP/WP JUNCTION BOX TESTED AT Cimfr-dhanbad For Flameproof And Weather Proof Test As Per Is/iec 60079-2007 Suitable For Zone-1, Zone-2 And For Gas Group Iia And Iib Exd-t6 In Cast Aluminium Lm-6 Enclosure Without CaNopy, Complete With Maximum 50 No.2.5Sqmm Connectwell Terminals In Two Rows. Maximum 10:3/4”et Cable Entries Can Be Provided At The Bottom. Maximum 2:1”et Cable Entries Can Be Provided On Left Hand Side & Right-hand Side. External Mounting Legs For Wall/ Structure Mounting, Ip65 Class Of Protection As Per Is/iec 60529- Epoxy Powder Coated With 60 Micron Coating In Light Gray 2001. Shade 631 As Per Is5.thickness Of Enclosure 5-10mm. 3mm Round Neoprene Rubber Gasket In Cover Groove. 2No External And 1No Internal Earthing By Brass Round Head Nickle Plated Brass Screws With Plain Washer & Spring Washers. Cover Fixing By Ss Allen Bolt 6 Mm. Terminals Clip On Type Connectwel Make With End Plate, End Stop And Markers On One Side
1296	Supply,installation,testing & Commisiongof following Three Way Connector box IP 65
1297	Supply,installation,testing & Commisiongof following Two Way Connector box IP 65
1298	Supply & erecting of outdoor type junction box with 3 phase & nutral bus bar
1299	Supplying, erecting & marking FPMCB 40A to 63A, with rated short – circuit breaking capacity (Icn) 10kA in provided distribution board as per specification No. SW-SWR/MCB
1300	Providing & erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, No line-load bias in provided enclosure/panel as per specification No. SW-SWR/MCCB
1301	Providing & erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, No line-load bias in provided enclosure/panel as per specification No. SW-SWR/MCCB
1302	Providing & erecting 4 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, No line-load bias in provided enclosure/panel as per specification No. SW-SWR/MCCB
1303	Providing & erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, No line-load bias in provided enclosure /panel as per specification No. SW-SWR/MCCB
1304	Providing & erecting 4 Pole MCCB 415V, 630A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, No line-load bias in provided enclosure/panel as per specification No. SW-SWR/MCCB
1305	Supplying, installing, testing and commissioning air circuit breaker manual drawout type, 650V, 1250A rated at 50º C without deration, 12kV Impulse, 4 pole (100% Neutral Protection) 50 kA (Ics=Icu=Icw for 1s),with standard accessories with ready to close, individual fault trip, alarm and trip indications, mechanical and electrical anti pumping, soft/hard rating plug (including hard rating plug CT) with Micro-processer based LCD display release with LSIG and temperature rise protection & with 4 C/O contacts for On-Off-Trip indication, min. 5 event and trip history on breaker display on provided iron frame as per specification No. SW-SWR/ACB
1306	Supplying, erecting, testing & commissioning 11kV, 630A, 21kA/3sec, 3 way outdoor, extensible motorised SCADA compatible RMU, internal arc tested consisting of 1 No. feeder with 1 LBS and 2 No. feeder with 2 VCB. compliant to IEC 62271 -100,200 and 102, as per specification No. SW-HTS/RMU SCADA
1307	Supplying and erecting terminal spreaders suitable for 4 pole, above 100A up to 250A MCCB (Set of 8)
1308	Supplying and erecting terminal spreaders suitable for 4 pole, above 250A up to 400A MCCB (Set of 8)
1309	Supplying and erecting terminal spreaders suitable for 4 pole, above 630A up to 800A MCCB (Set of 8)
1310	Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for up to 250A MCCB.
1311	Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for above 250A up to 630A MCCB.
1312	Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for above 630A up to 800A MCCB.
1313	Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding,riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.
1314	Supplying and erecting self-locking arrangement with keys in duplicate, made of brass of grade 1 compliance to IS 729-1979 duly erected, flush with surface of panel /cupboard
1315	Supplying, erecting, testing & commisioning of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 & current density 0.8 A per Sqmm with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification No. CP-BB
1316	Supplying and erecting AC three phase HT CT multifunction net meter DLMS compliance of accuracy class 0.5, 3x 63.5V, 50Hz, with backlit LCD display, optical port & RS 232 port( measures import kWh, kVAh, export kWh, kVAh, net kWh, kVAh, V, I, kW, 6 months history of energy, load survey, TOD, tamper detection & logging, power ON/OFF events, instantaneous parameters of rating 1/5A with display in absence of power) with wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer.
1317	Supplying and erecting Intelligent flush mounted panel meter three phase four wire (IPM) input voltage measurement range 50-550 V AC (P-P) 415V, aux. supply 90-300 V AC/DC, flush mounted (96 x 96 mm) meter constant Wh viewing in LCD multifunction meters in auto scroll mode with voltage, current, frequency, power factor kW, kVA, kVAR, kWh, kVAh, kVARh, phase angle, interrupts, THD, complete with RS 485 communication protocol, class 1 accuracy and wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer.
1318	Supplying, erecting, testing and commissioning 11KV HT metering cubical (compact / vertical type) approved by MSEDCL / licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle, painted with powder coating / epoxy paint of required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring No of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 No. CT having required ratio between 50/5A to 200/5A, VA 10 or 15, Class 0.2S, epoxy casted 3 No. PT having ratio 11000/V3/110/V3 VA 50, Class 0.2 suitable for provided trivector meter, and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation.
1319	Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates
1320	Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow /green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.
1321	Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250V on provided box / panel with necessary material, wiring & connections etc
1322	Supplying, installation & marking of surge arrestor/ surge protection device at the sub main distribution board after the incoming breaker of type 2 tested for Imax 15 kA for three phase and neutral with compliance to IEC 61643-11 as per specification No. CP-SPD Note:- The above items shall be used only in installation where sensitive instruments are used and installations that are prone to surges.
1323	Supplying and erecting 200 kVAr, 440 V 3 phase, 50 Hz., Contactor Logic & Intelligent Relay micro APFC passive filter panel, consisting of suitable steps of APP/MPP type capacitor units with Detuned (harmonic filter) reactors of suitable rating , APFC panel shall be compliance to IEC 61439 and power quality IEC 61921 standard as per specification No CP-ED/APFC
1324	Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification No. CB-LT/AL
1325	Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification No. CB-LT/AL
1326	Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification No. CB-LT/AL
1327	Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification No. CB-LT/AL
1328	Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 300 sq. mm. aluminium conductor laid in provided trench / pipe as per specification No. CB-HT
1329	Supplying and laying (including excavation of suitable width & depth up to 90 cm) 200 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
1330	Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification No.EA-EP
1331	Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and Non-corrosive bond with required joints As per specification No. EA-EP.
1332	Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and Non-corrosive bond with required joints As per specification No. EA-EP.
1333	Supplying, installing, testing & commissioning 3 phase, 11/0.433 kV, 50 Hz., 800 kVA, Mineral oil immersed and naturally cooled outdoor type, Copper wound, without gas cushioning ,hermetically Sealed transformer, delta/star connected additional neutral brought out on load side, temperature rise should Not exceed 45℃ by thermometer in oil and 50℃ by the resistance method in winding at full load rating, using type A winding insulation (kraft paper) with HV tapping (with on load tap changer) on load +5 to -15 in steps of 2.5%, with standard accessories complete with test certificate with losses below 2287 Watts at 50% load, 6403 Watts at 100% load as per IS:1180 (part 1) : 2014 , withnecessary permissions of Electrical Inspector, as per specification No SS- TR-SL Note- For indoor type transformer add Rs. 18000/- inrate of transformer.
1334	Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated complete.
1335	Providing pair of duly tested rubber hand gloves as per IS :47705 suitable for working up to 22 kV supply complete.
1336	Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution,etc. (All above contents shall be of standard makes)
1337	Supplying and fixing PVC synthetic elastomer electrically insulating mat with class C insulation conforming to IS: 15652 – 2006 tested having 3mm thickness up to 33 Kv
1338	Supplying shock proof leather safety shoes of electrical grade of standard size as IS :11226, 14544 duly tested, with necessary test certificate from manufacturer.
1339	Supplying, erecting, testing and commissioning of Microprocessor based Generator Control Unit (Synchronization panel) panel suitable for diesel generating set of above 400 kVA up to 500 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features and safeties etc as per specification No.GEN-SYNC.
1340	Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included)
1341	Supplying, erecting, testing and commissioning of diesel generating set with alternator of 500 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 65.5 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel Not less than 450 Ltr etc. on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspector as per specification No. GEN-DG (AS per latest CPCB-IV)
1342	Supplying and erecting G.I. pipe ‘C’ class ERW 25 mm dia with necessary fittings complete as per specification No. FF-PP
1343	Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessary fittings complete as per specification No. FF-PP
1344	Supplying and erecting G.I. pipe ‘C’ class ERW 65 mm dia with necessary fittings complete as per specification No. FF-PP
1345	Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia with necessary fittings complete as per specification No. FF-PP
1346	Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification No. FF-PP
1347	Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with necessary fittings complete as per specification No. FF-PP
1348	Providing coating of bitumen paint & 4mm thick wrapping for underground 150 mm ring main of fire fighting system.
1349	Supplying and erecting 100 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification No. FF-VL/ELS
1350	Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification No. FF-VL/BFV
1351	Supplying and erecting 150 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification No. FF-VL/BFV
1352	Supplying and erecting 100 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification No. FF-VL/NRV
1353	Supplying and erecting 50 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification No. FF-VL/GV
1354	Supplying and erecting gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification No. FF-VL/HV
1355	Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification No. FF-FFA/HV
1356	Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification No. FF-FFA/RRL
1357	Supplying and erecting 19 mm dia high pressure poly propylene hose pipe complete as per specification No. FF-FFA/HOP
1358	Supplying and erecting gun metal branch pipe of 63 mm dia fitted with 20 mm dia detachable hexagonal Nozzle complete as per specification No. FF FFA/NZ
1359	Supplying and erecting 19 mm dia gun metal chrome plated Nozzle complete as per specification No. FF-FFA/NZ
1360	Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification No. FF-FFA/ARV
1361	Supplying and erecting M.S./CRCA cabinet for housing single hydrant valve of size ( 400 x 400 x 400)mm or hose pipe box of size ( 600 x 600 x 200)mm made from min. 1.5 mm thick CRCA sheet with angle iron work of min. of size (25 x 25 x 4) mm having front doors with viewing glass of size (200x150) mm and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)
1362	Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8\"x6\") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)
1363	Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler, 15 mm (½\") dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification No. FFSPR.
1364	Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.
1365	Supplying and erecting ISI mark GI pipe 32 mm. dia ‘C” class at position with accessories complete. Specification No. CW-PLB/GP.
1366	Supplying and erecting ISI mark GI pipe 40 mm. dia ‘C” class at position with accessories complete. Specification No. CW-PLB/GP.
1367	Sprinkler Flexible drop 1500 mm long - UL Listed pipes made of Corrugated SS Tubing to with stand 16 Bar pressure with welded reducer on one end to directly accommodate sprinkler & female check-nut on the other end to connect to the branch pipe with supports complete.
1368	Supplying, erecting, testing and commissioning vane type water flow detector 150 mm dia. with 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes.
1369	Inspector test valve assembly with watch glass arrangement PN16, With Drain BallValve, 50mm dia
1370	Supply & fixing of approved type Rosette Plates ( Recessed type, in two piece) for Sprinklers below false ceiling area. The Rosette shall be fabricated by M.S. plate, 2mm thick, powder coated of color approved by architects / client.
1371	Supplyingandfixing150 mm Mechanical Gong Control Valve with 24 V hooter, bronze seat clapper, clapper arm, hydraulically driven mechanical gong bell to sound continuous alarm when wet riser / sprinkler system activates, clock valve, pressure gauge, emergency release, strainer, with drain pipe leading to drain, bypass, test control box, ball valves, orifice plate, gaskets,cabling, pressure & flow switches, Belletc. Complete.
1372	Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 of 4 kg capacity with necessary clamp for erection on Wall.
1373	Supplying & erecting Carbon Dioxide (CO2) Trolley mounted Fire Extinguisher with 45 kg capacity, cartridge type conform to IS 2878, gas confirming to 15222, cylinder confirming to IS 7285, PESO approved complete.
1374	Automatic Modular Extinguisher, Gas based (clean agent as per NFPA 2000) based sprinkler with MS vessel, ceiling mounted with necessary bracket, fasteners etc complete. (5 kg weight) (For Meter Rooms, Panel Rooms, Equipment Rooms etc)
1375	Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
1376	Supplying and erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
1377	Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 No. X 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV
1378	Supplying, installing, testing & commissioning split type variable speed inverter techNology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.0TR to 1.2TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 No of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having coppercondenser, minimum 2.5PM filter, self diagNois feature, stabilizer free operation & temperature display on indoor unit, Noise level maximum 50dBA at position as per specification No. APAC/ WAC
1379	Supplying, erecting, testing and commissioning of 16HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitablegreen equivalent refrigerant, for minimum cooling capacity as delivering 100%capacity at 47° C, Non stop cooling even at 56° C and coefficient of performance (COP) minimum 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV techNology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.
1380	Supplying, erecting, testing and commissioning of 18HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100%capacity at 47° C, Non stop cooling even at 56° C and coefficient of performance (COP) minimum 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/ digital VRF/VRV techNology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.
1381	Supplying, erecting, testing and commissioning of 20HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100%capacity at 47° C, Non stop cooling even at 56°C and coefficient of performance (COP) minimum 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV techNology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.
1382	Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of Nominal cooling capacity 1.0TR ( 441 cfm ) to 1.3TR (512 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainagearrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.
1383	Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of Nominal cooling capacity 1.5TR (512 cfm) to 1.8TR (618 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainagearrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.
1384	Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of Nominal cooling capacity 2.0TR (618 cfm) to 2.3TR (671 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainagearrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.
1385	Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of Nominal cooling capacity 2.6TR (918 cfm) to 2.8TR ( 1100 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.
1386	Supplying, erecting, testing & commissioning Exhuast air ductable circular inline fan inlethaving 500 cfm capacity with maintaining the static pressure minimum 15mm suitable to operate on 1 phase, 230V, 50Hz, A.C. supply complete.
1387	Supplying, erecting, testing & commissioning Exhuast air ductable circular inline fan inlethaving 1000 cfm capacity with maintaining the static pressure minimum 15mm suitable to operate on 1 phase, 230V, 50Hz, A.C. supply complete.
1388	Supplying and erecting circular flexible/rigid PVC pipe duct of size 100mm dia, 4mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc. with sealing with provided control/air flow regulating valves / dampers, filters at position complete.
1389	Supplying and erecting an air flow regulating valves/dampers in provided flexible or rigid duct/pipe of 100 mm size with an alteration for existing flexible PVC pipe duct and necessary joints, sealing, couplings at position complete.
1390	Supplying, erecting, testing and commissioning centralised programmable remote control panel (HMI) touch manager controls minimum 16 system of 64 ODU\"s can be controlled and up to 992 IDU\"s can be individually mounted and controlled indoor units having colour min 200mm size LCD touch panel, yearly schedule, power proportional distribution function, temperature limitation, history function complete erected on wall integrated with provided fire alarm system.
1391	Supply, installation, testing and commissioning of manually operated, opposed blade, duct mounted, flanged volume control dampers of required sizes in GI construction with operating mechanism, mounting arrangement, etc.
1392	Supply, fabrication, installation and testing of flexible canvas connections constructed between AHU /FANof suitable size with fire resist flexible double canvas sleeve complete.
1393	Providing adhesive thermal insulation for supply / return air duct with 19mm nitrile rubber insulation having R-value as per the prevailing provisions in ECBC2017
1394	Providing and applying of acoustic insulation for air ducts with 25mm thick,48 kg/cu.m fiber glass faced with RP tissue and covered with 26 SWG perforated aluminium sheets complete.
1395	Supplying & erecting tile type modular diffuser made from aluminium sheetwith powder coated matching to the ceiling shade for provided supply and returnair complete.
1396	Supplying and installation of high pressure grade required size copper connection Y or T- Joints/refnet complete erected on wall/ceiling with supports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the Normal operation of the VRV/VRF air conditioning system.
1397	Supplying and installing of collar damper of galvanised iron material of upto 120 microns for anti corrosive resistance for supply air grill of suitable size.
1398	Supplying, laying/fixing, testing and commissioning of appropriate Nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application ofmulticoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete.
1399	Supplying, laying/fixing, testing and commissioning of appropriate Nominal refrigerant copper pipe of 34.9mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application ofmulticoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete.
1400	supplying, laying/fixing, testing and commissioning of appropriate Nominalbrefrigerant copper pipe of 28.6mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application ofmulticoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete.
1401	supplying, laying/fixing, testing and commissioning of appropriate Nominal refrigerant copper pipe of 22.2mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application ofmulticoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiation with OEM standards of VRV/VRF air conditioning system complete.
1402	supplying, laying/fixing, testing and commissioning of appropriate Nominal refrigerant copper pipe of 19.1mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application ofmulticoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.
1403	supplying, laying/fixing, testing and commissioning of appropriate Nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application ofmulticoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.
1404	supplying, laying/fixing, testing and commissioning of appropriate Nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application ofmulticoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.
1405	supplying, laying/fixing, testing and commissioning of appropriate Nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application ofmulticoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.
1406	supplying, laying/fixing, testing and commissioning of appropriate Nominal refrigerant copper pipe of 6.4mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application ofmulticoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.
1407	Supplying and erecting 25/32 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 3.2 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for ACSystem as per specification No. ESD-HWP/CPVCNote : For Chlorinated Polyvinyl Chloride pipe, additional insulation of maximum6 mm thickness to be considered on pipe.
1408	Supplying and erecting 32/40 mm (ID/OD) Chlorinated polyvinyl chloridepipe (CPVC), thickness 3.8 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for AC System as per specification No. ESD-HWP/CPVCNote : For Chlorinated Polyvinyl Chloride pipe, additional insulation of maximum6 mm thickness to be considered on pipe.
1409	Supplying and erecting 40/50 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 3.8 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for AC System as per specification No. ESD-HWP/CPVCNote : For Chlorinated Polyvinyl Chloride pipe, additional insulation of maximum6 mm thickness to be considered on pipe.
1410	Supplying, fixing and commissioning 4 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification No SW-RCCB/RCBO
1411	Supplying, fixing and commissioning 4 pole RCBO 63A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification No SW-RCCB/RCBO
1412	Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification No. CB-LT/CU
1413	Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification No. CB-LT/CU
1414	Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 25 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification No. CB-LT/CU
1415	Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 100 mm height comprising all required standard accessories.
1416	Providing & erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 500 mm width & 100 mm height comprising all required standard accessories.
1417	SITC of Sectionalised, Horizontal Double Skin Air Handling Units constructed of extruded aluminum hollow sections framework, preplasticised GS Sheets of 22G (outside) / 20G (inside) with 43mm thick +/- 2mm thick double skin sandwich panels having PUF insulation of density 48 kg/cum, thermal break profile ,consisting of fan section having TEFC squirrel cage induction DIDW backward curved direct driven fan with VFD. The motor shall be IE3 efficiency suitable for 3 phase supply. Mixing chamber,Pre Filter(MERV 8) ,Bag Filter(MERV 12), Fine Filter(MERV 14), DX coil, UV lamp, EEV kit and Control box Kitfor stepless variation ofspeed of fan based on temperature / pressure sensor inputs. Factory Fitted Spring Type Vibration isolators as required to be provided. Fan with DC motor shall be suitable for modulation based on 0-10 Volts signal which can be given through DP Switches or through a BMS system. Additionally, a potentiometer for manually speed control of DIDW backward curved direct driven fan shall be provided. Internal electrical and control wiring of AHU to be provided as factory fitted from AHU supplier.Duct flexible connector (fire proof) shall be provided at outlets and return connection of AHU.Opposed blade type Dampers at Supply / Return /Fresh / Relief Air. DX cooling coils shall be of 6 Row deep or as per OEM selection. Face Velocity across the coils should Not exceed 500 FPM. cooling coils shall be constructed from premium quality seamless copper tubes 12.5mm dia and aluminum fins of 12 FPI as per specifications. Drain connection is Threaded SS Nipple and condensate tray of SS 304, Grade 18 with Mirror Finish. Plant Tissue LAB AHU : Floor Mounted – 30TR: Dehumidified CFM -13500 , FA CFM -2700: ESP -35 mm wg
1418	SITC of Sectionalised, Horizontal Double Skin Air Handling Units constructed of extruded aluminum hollow sections framework, preplasticised GS Sheets of 22G (outside) / 20G (inside) with 43mm thick +/- 2mm thick double skin sandwich panels having PUF insulation of density 48 kg/cum, thermal break profile ,consisting of fan section having TEFC squirrel cage induction DIDW backward curved direct driven fan with VFD. The motor shall be IE3 efficiency suitable for 3 phase supply. Mixing chamber,Pre Filter(MERV 8) ,Bag Filter(MERV 12), Fine Filter(MERV 14), DX coil, UV lamp, EEV kit and Control box Kitfor stepless variation ofspeed of fan based on temperature / pressure sensor inputs. Factory Fitted Spring Type Vibration isolators as required to be provided. Fan with DC motor shall be suitable for modulation based on 0-10 Volts signal which can be given through DP Switches or through a BMS system. Additionally, a potentiometer for manually speed control of DIDW backward curved direct driven fan shall be provided. Internal electrical and control wiring of AHU to be provided as factory fitted from AHU supplier.Duct flexible connector (fire proof) shall be provided at outlets and return connection of AHU.Opposed blade type Dampers at Supply / Return /Fresh / Relief Air. DX cooling coils shall be of 6 Row deep or as per OEM selection. Face Velocity across the coils should Not exceed 500 FPM. cooling coils shall be constructed from premium quality seamless copper tubes 12.5mm dia and aluminum fins of 12 FPI as per specifications. Drain connection is Threaded SS Nipple and condensate tray of SS 304, Grade 18 with Mirror Finish. Micro Biology LAB & Gene Bank AHU : Floor Mounted – 25TR: Dehumidified CFM- 11200 , FA CFM -2240 CFM: ESP -30 mm wg
1419	SITC of Sectionalised, Horizontal Double Skin Air Handling Units constructed of extruded aluminum hollow sections framework, preplasticised GS Sheets of 22G (outside) / 20G (inside) with 43mm thick +/- 2mm thick double skin sandwich panels having PUF insulation of density 48 kg/cum, thermal break profile ,consisting of fan section having TEFC squirrel cage induction DIDW backward curved direct driven fan with VFD. The motor shall be IE3 efficiency suitable for 3 phase supply. Mixing chamber,Pre Filter(MERV 8) ,Bag Filter(MERV 12), Fine Filter(MERV 14), DX coil, UV lamp, EEV kit and Control box Kitfor stepless variation ofspeed of fan based on temperature / pressure sensor inputs. Factory Fitted Spring Type Vibration isolators as required to be provided. Fan with DC motor shall be suitable for modulation based on 0-10 Volts signal which can be given through DP Switches or through a BMS system. Additionally, a potentiometer for manually speed control of DIDW backward curved direct driven fan shall be provided. Internal electrical and control wiring of AHU to be provided as factory fitted from AHU supplier.Duct flexible connector (fire proof) shall be provided at outlets and return connection of AHU.Opposed blade type Dampers at Supply / Return /Fresh / Relief Air. DX cooling coils shall be of 6 Row deep or as per OEM selection. Face Velocity across the coils should Not exceed 500 FPM. cooling coils shall be constructed from premium quality seamless copper tubes 12.5mm dia and aluminum fins of 12 FPI as per specifications. Drain connection is Threaded SS Nipple and condensate tray of SS 304, Grade 18 with Mirror Finish. Plant Pathology LAB AHU : Floor Mounted – 14TR: Dehumidified CFM- 5600 , FA CFM -1120 CFM: ESP -30 mm wg
1420	SITC of Sectionalised, Horizontal Double Skin Air Handling Units constructed of extruded aluminum hollow sections framework, preplasticised GS Sheets of 22G (outside) / 20G (inside) with 43mm thick +/- 2mm thick double skin sandwich panels having PUF insulation of density 48 kg/cum, thermal break profile ,consisting of fan section having TEFC squirrel cage induction DIDW backward curved direct driven fan with VFD. The motor shall be IE3 efficiency suitable for 3 phase supply. Mixing chamber,Pre Filter(MERV 8) ,Bag Filter(MERV 12), DX coil, EEV kit and Control box Kitfor stepless variation ofspeed of fan based on temperature / pressure sensor inputs. Factory Fitted Spring Type Vibration isolators as required to be provided. Fan with DC motor shall be suitable for modulation based on 0-10 Volts signal which can be given through DP Switches or through a BMS system. Additionally, a potentiometer for manually speed control of DIDW backward curved direct driven fan shall be provided. Internal electrical and control wiring of AHU to be provided as factory fitted from AHU supplier.Duct flexible connector (fire proof) shall be provided at outlets and return connection of AHU.Opposed blade type Dampers at Supply / Return /Fresh / Relief Air. DX cooling coils shall be of 6 Row deep or as per OEM selection. Face Velocity across the coils should Not exceed 500 FPM. cooling coils shall be constructed from premium quality seamless copper tubes 12.5mm dia and aluminum fins of 12 FPI as per specifications. Drain connection is Threaded SS Nipple and condensate tray of SS 304, Grade 18 with Mirror Finish. Auditorium HallAHU : Floor Mounted – 43TR: Dehumidified CFM -18500 , FA CFM -3700: ESP -45 mm wg
1421	Supply, installation, testing & commissioning of single skin Cabinet type Inline fans for Exhuast Air suitable for installing in any position in the vertical or horizontal ducts. The casing shall be constructed of galvanised steel . The fan shall be DIDW with forward/Backward curved impeller alongwith maintenance free external rotor motor and bird screen. The motor with IE3 efficiency shall be suitable for415+10% volts, 50 cycles , 3 phase AC supply or 220 + 10% volt single phase 50 cycles AC supply. Exposed Fans shall be supplied with all weather proof protection with G.I. CaNopy and 2 layers of anti corrosive red oxide paint.Capacity -1200 CFM for Exhaust air
1422	Supply, Installation of Room Temperature/RH Sensor.
1423	Supply, Installation of Room Temp/RH Transmitter.
1424	Supply, installation of Differential pressure transmitters,integrated with blower VFD, Range 0-150mm
1425	Supply, Installation of Differential pressure switch for filters 0-150mm.
1426	Supply, installation, balancing and commissioning offactory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Thickness 0.63 mm sheet
1427	Supply, installation, balancing and commissioning offactory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Thickness 0.8 mm sheet
1428	Supply, installation, testing and commissioning of Motorized (ONOFF Type) duct mounted GI volume control damper with enthalpy sensorandnecessarycontrol wire (minimum 1.5 Sqmm) for integration within AHU room. Damper
1429	Supply, installation, testing and commissioning of Motorized (ON-OFF Type) duct mounted GI volume control damper with enthalpy sensorandnecessarycontrol wire (minimum 1.5 Sqmm) for integration within AHU room. Damper Actuator
1430	Supplying & fixing of powder coated extruded aluminium Return / Exhaust AirGrills with louvers but without volume control dampers complete as required.
1431	Supplying, fixing acoustic lining on wall and ceiling of AHU rooms with 50mm thick, density 32 kg/cu.m resin bonded glass fiber insulation friction fixed in 610mm x 610 mm frame work made of 25X50X50X50X25 mm made out of 0.6mm thick GI sheet U shaped channel and covered with reinforced fiber glass tissue and finished with 0.80 mm perforated aluminium sheet etc. complete as required and as per specifications.
1432	Supply, Installation, testing and commissioning of Individual Electrical panel for each AHUThe Panel should consist of Incomer MCCB, Contactors,DOL / Star - Delta starters, Relays, Push button ( On/Off/Reset ), Indicating Lamps ( Start / Stop / Trip ) etc.By- pass DOL starter to be included in case of VFD.Each panel should haveVFD suitable to AHU motor ratingwith necessary instrument for cooling fan, inlet louvers & Filters for VFD , view panel, necessary relays & contactor, Potential free contacts for BMS application, interlocks etc. as per specification.Wiring/Control wiring from fire damper panel to AHU panel to fire damper motor & for micro switch for stopping the fan when fire damper closes(as required by application). For on/off/remote and local operation, 3 pole single throw switch shall be provided in No. AHU panel to facilitate override of the automatic operation. All starters shall be provided with suitable potential free contact for connections to the Building Automation System.Phase Reversal and Harmonic Filter. Panel to monitor and controlprocess parameters like Temperature,RH, Set points, Switchin ON and OFF of machines, feedback from sensors,Heater Thyristors, etc. Panel should have spare I/Os for future requirements.
1433	Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
1434	Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.
1435	Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
1436	Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
1437	Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
1438	Supplying and erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
1439	Supplying and erecting mains with 3x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
1440	Supplying and erecting mains with 1x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
1441	Supplying and erecting mains with 3x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
1442	Supplying and erecting mains with 1x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
1443	Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 No. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 Kv
1444	Supplying and erecting modular type switch 16 / 20 A with indicator, dulyerected on provided plate and box with wiring connections complete.
1445	Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
1446	Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.
1447	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
1448	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
1449	Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/CW
1450	Point wiring for ceiling fan concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/CW
1451	Secondary point wiring for additional light/ bell point, concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW
1452	Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WGPW/CW
1453	Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
1454	Supplying and erecting LED square / circular Max. 25 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty
1455	Supplying and erecting LED Panel Light(600mm X 600mm) Max. 30 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min. 3600 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
1456	Supplying and erecting LED Panel Light(600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
1457	Supplying & erecting Aviation obstruction light consisting of yellow painted diecast aluminium alloy housing with Integral LED aviation light comprising of aluminium housing with polycarbonate enclosure complete.
1458	Supplying and erecting energy saving ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification No. FG-FN/CF
1459	Supplying, erecting, testing and commissioning of 10kVA capacity online pure sine wave, with backup time of 30 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, 3 phase input & 3 phase output complete with all protections as per specification No. AP-UPS
1460	Supplying and erecting 12V/26Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete
1461	Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification No. SW-SWR/MCB
1462	Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification No. SW-SWR/MCB
1463	Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification No. SW-SWR/MCB
1464	Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification No. SW-SWR/MCB
1465	Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification No. SW-SWR/MCBDB
1466	Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification No. SW-SWR/MCBDB
1467	Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.
1468	Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification No. SW-SWR/MCBDB1
1469	Providing & erecting 3 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, No line-load bias in provided enclosure/panel as per specification No. SW-SWR/MCCB
1470	Providing & erecting 3 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, No line-load bias in provided enclosure/panel as per specification No. SW-SWR/MCCB (For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.)
1471	Providing & erecting 3 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, No line-load bias in provided enclosure /panel as per specification No. SW-SWR/MCCB(For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.)
1472	Supplying, erecting & commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification No. SW-RCCB/RCCB
1473	Supplying, fixing and commissioning 4 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification No SW-RCCB/RCBO
1474	Supplying and erecting terminal spreaders suitable for 4 pole, above 400A up to 630A MCCB (Set of 8)
1475	Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of Nominal current (In) and adjustable time delay 100/200 millisecond suitable for above 200A up to 400A MCCB with inbuilt CTs.
1476	Supplying and erecting extended rotary handle for MCCB with adjustabletelescopic rod suitable for up to 250A MCCB.
1477	Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.
1478	Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 & Current Density 0.8 A per sq. mm. with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification No. BCPBB
1479	Supplying & erecting LED type indicating pilot lamp with LED colours red /yellow / green, 230 / 250V on provided box / panel with necessary material,wiring & connections etc.
1480	Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc.
1481	Supplying, installation & marking of surge arrestor/ surge protection device at the sub main distribution board after the incoming breaker of type 2 tested for Imax 40 kA for three phase and neutral with compliance to IEC 61643-11 as per specification No. CP-SPD
1482	Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 120 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification No. CB-LT/AL
1483	Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification No. CB-LT/CU
1484	Providing & erecting hot dipped galvanised perforated type cable tray manufactured from 16 SWG GI sheet of 500 mm width & 75 mm height complete with necessary coupler plates & hardware.
1485	SITC of High quality LED PARCAN Light used for dance hall, architectural and stage lighting with below specifications:• Lamp power - 100W LED• Power supply - 100-240 AC, 50/60 Hz• Channels: 2 channel DMX 512 • Control: Manual, DMX, DALI• Color Temperature: 3000K• CRI > 90• Function: Dimming, Strobe • Dimming: 0-100%• Beam Angle - 9/15/20° • Protection rating - IP20• Dimension - 420 x 280 x 452mm• Weight – 4.5 Kgs
1486	SITC of 2x2 blinder matrix fixture with advanced COB LED techNology light with below specifications:-• Frequency : 50-60Hz • Power Consumption: 400W• LEDs Qty : 4 pieces • Light Color: Single color warm white (3200K) • Lifetime: Over 50,000 hours • Dimmer: 0~100% linearly adjustable• Beam Angle: 30 degree• Control mode: DMX512,Master/Slave, Auto Run, Sound active. • IP Grade: IP20• Net Weight: 5kgs.
1487	SITC of High quality 200W LED Profile Spot Light used as a Spot Light and high-contrast gobo projection Light, Other Technical specifications as below: • Lamp Power : 200W COB LED,• Power Supply : AC 110-230V, 50Hz.• Colour Temperature : 3200K • CRI : >90 • Focus : Manual Focus • Beam Angle : 19°• Control : DMX, Autorun and Master/Slave• Shutter arrangements : Beam shapping shutter or plastic gobo projection assembly.• Lux Level - 20,378 lux @ 2 Mtr with 19°,3200K• Dimming : 0 - 100% dimming• Protection Rating : IP20• Dimentions : W 300 x L 700 x H 310mm• Weight : 7.50Kg • Certification: CE
1488	SITC of High quality 200W LED Fresnel light used as a Key light, Back light, Fill light with dimming, spot & flood focus versions for creating various effects for multiple applications with specifications as below.• Lamp power - 200W COB LED• Power supply - 100-240 AC, 50/60 Hz• Power cable -3 core 1 sq. mm. copper PVC insulated • Color Temperature: 3200K• Control : DMX512 / Manual • Spot - Flood focus adjustment : Motorised• CRI > 95• TLCI>95• Dimming - 0-100% through manual and DMX• Beam Angle - 10°-50° • Protection rating - IP20• LUX at 2m: 38,270 at 10° & 3,557 at 50° (3200K)• Dimension - W 250 x L 370 x H 295 mm• Weight – 8.5 Kg• Certification: CE
1489	SITC of 54X3W LED par light complete with 8-channel DMX 512, high brightness mixing color evenly, stable performance with sound active auto, DMX, and power and DMX loop in and out option, undergone through 7 Tank chemical treatement to keep them rust free and, duly powder coated in black matt texture finish and technical specifications as below. • Lamp - 54 X 3W RGB LED (12R+18G+18B+6W) • Power consumpsion - 150W • Power supply - 230/240V AC • Power cable -3 core 1.5 sq. mm. copper PVC insulated • Channels - 8 Channel DMX-512 • Beam angle - 25° (15°, 45° optional) • Control mode - DMX, and Manual. • Function - strobe, Dimming, sound active.
1490	SITC of 150W CE Certified LED Moving Head light with technical specifications as below: • Voltage : AC100V-240V, 50/60Hz • Lamp :150W LED• Channel :12 /16 channels optional• Pan scanning : 540° (16bit scanning accuracy) • Tilt scanning : 270° (16bit scanning accuracy)• Color Wheel 1 : color wheel (10 colors + open,rotating in directions and rainbow effect)• Color Wheel 2:Rainbow color wheel including 6 colors • Gobo Wheel : 13 gobos (lncluding 4 glass gobos) + open • Prism: 8-facet prism with clockwise andanti-clockwiserotation• Dimmer: 0%-100% linear dimmer • Foggy: 0%-100% linear foggy• Touch screen with 180°reversed available and four press buttons• Dimentions : H: 425 x W 310 x D 295 mm• Gross Weight : 20KG• Certification: CE
1491	SITC of 150W RGBWLED Wash Light fixture with below specification details.• Light Source : RGBW LED• Operating Voltage : 100-240VAC, 50-60 Hz• Power: 150W • IP Rated IP20 • Beam angle : 96°• DMX Channels : 8 channel• Operating Modes : DMX512 / Manual / RDM• Dimming : 0-100% Dimmable• Features: Strobe, auto color change, Master slave, sound mode.• Housing: Aluminum Sheet fabricated hosuing with black epoxy powder coated finish•DMX cable In-out looping cables • Dimension: 360 x 360 x 125 mm • Net Weight: 5.6 kgs • Certification: CE Makes: Canara Lighting/Martin/Desisti
1492	SITC of 4- leaf barndoorfor 200W LED FRESNEL (3200K) light , undergone through 7 Tank chemical treatement to keep them rust free and, duly powder coated in black matt texture finish.
1493	SITC of Diecast aluminum \"C\" clamp with safety locking chain, duly powder coated in black matt texture finish and technical specifications as below.• Lock - MS threaded Galvanized lock key, Plastic Glass filled nylon moulded M6 key. • Receptacle - 28mm standard TV spigot.• Safety - MS Galvanized chain with pin. • Finish - Pretreated and black epoxy polyester powder coated. • Self weight - 0.54Kg• Safe working load – 150Kg.
1494	SITC of Safety bond with lock clip to be fixed around the grid to avoid fall of the material in case if the \"C\" clamp is Not locked properly . SWL 100Kgs.
1495	SITC of Identification name plate round 79MM undergone through 7 Tank chemical treatement to keep them rust free and duly powder coated in matt White texture finish.
1496	SITC of MS suspender consisting of fish plate of 150X150X6mm undergone through 7Tank chemical treatement to keep them rust free and with requisite anchor fastner(Customised)duly powder coated in black matt texture finish & stud with 12mm threaded rod to keep the Bar rigidly held With SWL of 200kg.
1497	SITC of MS \"C\" track size of 40 x 50 x 40mm, 3mm thick with owal slot of 14 x 40mm at every 200mm,made up of SAIL/Jindal make with 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish. Self weight 3.3Kg peRmtr.
1498	SITC of 8 Mtr Length Motorized FOH Light bar, Dual barrel duly powder coated, Made using 40NB dual construction, Matt black texture finish paint to keep them rust free, Powder coated 60 microns black matt finish with proper chemical treatment and methodogy, Specially designed compact gear box 3phase AC motor with DC Brake 1.5HP, Provided with Necessary pulley, guide pulleys, GI wire rope with winding drum, Compact gear box along with suitable capacity of motor unit, Upper and lower limit controller, Safe working load of 140Kg, Cable management system with all accessories as required.
1499	SITC of 8 Mtr Length Motorized Light bar with frill attachment, Dual barrel duly powder coated, Made using 40NB dual construction, Matt black texture finish paint to keep them rust free, Powder coated 60 microns black matt finish with proper chemical treatment and methodogy, Specially designed compact gear box 3phase AC motor with DC Brake 1.5HP, Provided with Necessary pulley, guide pulleys, GI wire rope with winding drum, Compact gear box along with suitable capacity of motor unit, Upper and lower limit controller, Safe working load of 140Kg, Cable management system with all accessories as required.
1500	SITC of MS Power junction box made up of 22SWG CRCA sheet of jindal make undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish 4 way 10A IEC Socket of below specifications:- • Fixing : Snap fit /15 (1.5mm)• Terminations : /28 (2.8mm solder)• Total Max Rating : 10A, 250V a.c • Operating Temp : –20˚C to +70˚C• Mouldings : Nylon, Flammability Rating UL94V-0
1501	SITC of MS Signal junction box made up of 22SWG CRCA sheet of jindal make undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish 5 pin XLR DMX OUT connector of below specifications:- • Extra high temperature resistant insulator material.• All metal housing offers best overall RF protection & electromagnetic shielding• New duplex ground contact for excellent contact integrity between chassis and cable connector, Larger solder contacts for easier termination• Optional connection to easily join pin 1 to chassis ground
1502	SITC of Signal junction box made up of 22SWG CRCA sheet of jindal make undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish 5 pin XLR DMX IN connector of below specifications:- • Extra high temperature resistant insulator material.• All metal housing offers best overall RF protection & electromagnetic shielding• New duplex ground contact for excellent contact integrity between chassis and cable connector, Larger solder contacts for easier termination• Optional connection to easily join pin 1 to chassis ground
1503	SITC of DMX lighting junction loop box made up of 22SWG CRCA sheet of jindal make undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish 5 pin XLR DMX in / out connector of below specifications:-• Extra high temperature resistant insulator material.• All metal housing offers best overall RF protection & electromagnetic shielding• New duplex ground contact for excellent contact integrity between chassis and cable connector, Larger solder contacts for easier termination• Optional connection to easily join pin 1 to chassis ground.
1504	SITC of MS Auxilary fabricated marshalling boxesmade up of 20SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish for all the light bar with required No of ivory connectors.
1505	SITC of MS Fabricated made up of 22SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish power junction box (PJB) to terminate the Motorized section power connections including all accessories etc complete as required.
1506	SITC of 15 Way Direct Lighting Distribution Board made up of CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt texture finish consists of R, Y, B Indicator lamp,suitable rating, TPN incomer, SP Mcb\"s and for the junction boxes fixed on the top of the light bar including wiring and busbar connection with proper earthing and Hingable door with magnetic door lock complete.
1507	SITC of MS perforated traysSize 40 x 75 x 40mm treated with 7 tank process with various chemical treatment to keep them rust free, duly powder coated with matt black texture finish paint along with clamping arrangement .
1508	SITC of MS perforated traysSize 40 x300 x 40mm treated with 7 tank process with various chemical treatment to keep them rust free, duly powder coated with matt black texture finish paint along with clamping arrangement .
1509	SITC of Internal earthing copper bare conductor network related to work coming under our scope.
1510	SITC of installation hardwares such as clamps, connectors, glands, lugs, ferruels, welding rods etc.
1511	SITC of 5 pin XLR male / female connectors.
1512	SITC of 5 Pin XLR Termination plug.
1513	SITC of Valcro Tape (White if available)
1514	SITC of MS sheet metal fabricated power junction box duly powder coated and fitted with 2 10amps 3 pin IEC socket,ON/OFF switch and necessary glands to power splitters and console undergone through 7 tank process with various chemical treatment to keep them rust free duly powder coated with Matt black texture finish.
1515	SITC of Well designed and engineered Wall mount motor control centre panel & Remote control panel with emergency trip, necessary meterings and contactors and relays, push button stations and contact elements to control the motor system for motorised light bars & motorised curtain (MCCP/RCP -6).
1516	SITC of Digital Lighting Console with 1024 DMXchannels• 1024 Channels.• 96 Fixtures • 96 Dimmer Control Channels.• Time control of scenes: Fade in/out, LTP slope• Channels for each fixture 40 primary + 40 fine tune• LCD display with back light• 60 Scenes/Playbacks• 600 Scene step• 10 Scenes to run simultaneoulsy• Shape generator: Shapes of Dimmer, Pan/Tilt,RGB, CMY, Color, Gobo, Iris and Focus• Master slider - Global, playback, fixture• USB Memory - FAT32 supportedModel No: Mini Pearl
1517	SITC of Grid mount photo isolator DMX Amplifier unit 1 DMX input and 8 isolated output with following specifications: • Power Supply: 90-240V AC, 45-63Hz.• Control: DMX 512 protocol, • Control Signal input: 5 pin XLR female, • Size: 482 x 44 x 128mm , • Weight: 2Kg.with splitter bracket.
1518	SITC of DMX signal cable for DMX network.
1519	SITC of FRLS PVC copper multistrand flexible cable 7 core x 1.5 sq.mm.
1520	SITC of Main Valence fixing arrangement using 40NB Pipe 2mm thick, 11 mtr in length MS pipe, undergone through 7 tank process with various chemical treatment to keep them rust free duly powder coated with matt black texture finish with mounting brackets to suspend the arrangement including all accessories etc complete as required.
1521	SITC of Motorized Grand Tab track system 12mtrcentre parting with overlap of 0.9mtr provided with,Heavy duty extruded aluminium I track of 48x84mm, powder coated Track mounting brackets constructed of C track of dimension 40X50X40mmElectromechanical drive unit with 3PH INDUCTION MOTOR, 1.1KW, 3000RPM, 90B5 FLANGE MOUNT w for curtain movementGI wire ropes of 3mm in diameter constructed with 7 bundles of 7 strands with steel core at center Curtain holding Nylon wheel trollies consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of 200mm throughout the track.Nylon moulded 6201 Ball bearing Diverter pulley with with 90mm for outer diameter, 72mm diameter at groove base, 19mm pulley thickness & MS yellow passivated Routing pulleys with 165mm for outer diameter, 150mm diameter at groove base with 12mm pulley thickness.
1522	SITC of Motorized rear Tab track system 12mtrcentre parting with overlap of 0.9mtr provided with,Heavy duty extruded aluminium I track of 48x84mm, powder coated Track mounting brackets constructed of C track of dimension 40X50X40mmElectromechanical drive unit with 3PH INDUCTION MOTOR, 1.1KW, 3000RPM, 90B5 FLANGE MOUNT w for curtain movementGI wire ropes of 3mm in diameter constructed with 7 bundles of 7 strands with steel core at center Curtain holding Nylon wheel trollies consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of 200mm throughout the track.Nylon moulded 6201 Ball bearing Diverter pulley with with 90mm for outer diameter, 72mm diameter at groove base, 19mm pulley thickness & MS yellow passivated Routing pulleys with 165mm for outer diameter, 150mm diameter at groove base with 12mm pulley thickness.
1523	SITC of Fixed Wing Structure designed as per site condition for a height approx 5 Mtr x 2 Mtr made up of MS Square tube of 25mm or higher size rested on pivotable trolley on a track for the rotation of the wing with all accessories as required.
1524	SITC of Cyclorama arrangement using aluminium extruded \"\"I\"\" track of 48 x 84mm duly powder coated in black texture finish to use as straight cyclorama track with MS fabricated Grid/wall mount bracket constructed of C track of dimension 40X50X40mm duly powder coated to hold the track, MS fabricated Tie down railing cut length 3 mtr duly powder coated to keep the cyclorama in drum tight arrangement, 2 wheeler trolley placed uniformly at specific interval of 200mm throughout the track, MS powder coated Leading edge frame to keep the cyclorama in drum tight arrangement of Size 10 Mtr x 3.5 Mtr including all accessories etc complete as required.
1525	SITC of SIDE lader,made using 40NBdual barrel with 7 tank processvarious chemical treatment to keep them rust free, duly powder coated with Matt black texture finish.Size of 1200mm x 600mm
1526	SITC of Fire retardant velvette fabric 100% (2 times of the finished dimension) gathering for main vallance as per the approved patern and colour, Not less than 250/300 GSM, duly stitched along with and eyelets. Size : 11m x 1.5m
1527	SITC of Fire retardant velvette fabric 100% (2 times of the finished dimension) gathering for main curtain as per the approved patern and colour, Not less than 250/300 GSM, duly stitched along with and eyelets. Size : 6m x 4.5m
1528	SITC of Fire retardant cotton fabric with lining 50% (1.5 times of the finished dimension) gathering for rearcurtain as per the approved patern and colour, Not less than 200/250 GSM, duly stitched along witheyelets. Size: 6m x 4.5m
1529	SITC of Fire retardant cotton fabric 50% (1.5 times of the finished dimension) gathering for frills as per the approved patern and colour, Not less than 250 GSM, duly stitched along with eyelets. Size: 8m x 1.5m
1530	SITC of Fire retardant Cotton fabric fire retardant treated as per approved colour and make with a gathering of 0% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing. (For Wing) 5Mtr x 1.5Mtr complete with all accessories as required
1531	SITC of LED wall 10 ft x 5.8 ft indoor display system cabinet made up of mild steel with aspect ratio of 16:9, maximum pixel 1.9 with LED configuration to RGB3 in I SMD, Maximum depth of LED 80mm with pixel density 295269psm with life of light source 100000 hours with power input of 230 Vac @ 50-60Hz.
1532	SITCof Perforated plastic Cyclorama seamless welded screen, off white, with eyelets along all four sides, perforated plastic screen with eyelets including all accessories etc complete as required.Size: L 10 Mtr x H 3.5 Mtr.
1533	Supply, installation, testing & commissioning of LCR Array Loudspeakers, 2 x 8\" Front firing LF drivers and 2 x 6.5\" Side firing LF drivers, 1 x 6.5\" MF driver and 2 x 1\" HF exit compression driver with 2\" coil. Maximum peak SPL shall be 141 dB, Long-term handling capacity shall be 400 W program and 1200 W peak for the front firing LF drivers and 300 W program and 850 W peak for the side LF+MF+HF, Impedance 8 Ω for front LF and 8 Ω for side LF+MF+HF, Coverage (h) 80°, Frequency Range 60 Hz - 18 kHz. All complete as per approved drawings, tender specifications and direction of Engineer-in-Charge.
1534	Supply, installation, testing & commissioning of LCR Array Loudspeakers, 2 x 8\" Front firing LF drivers and 2 x 6.5\" Side firing LF drivers, 1 x 6.5\" MF driver and 2 x 1\" HF exit compression driver with 2\" coil. Maximum peak SPL shall be 140 dB, Long-term handling capacity shall be 400 W program and 1200 W peak for the front firing LF drivers and 300 W program and 850 W peak for the side LF+MF+HF, Impedance 8 Ω for front LF and 8 Ω for side LF+MF+HF, Coverage (h) 120°, Frequency Range 60 Hz - 18 kHz. All complete as per approved drawings, tender specifications and direction of Engineer-in-Charge.
1535	Supply, installation, testing & commissioning of Flown cardiod Subwoofers, 2-way bass-reflex design with 1 x 18\" front firing driver and 1 x 12\" rear radiating driver, Maximum peak SPL shall be 137 dB, Long-term handling capacity shall be 700 W program and 1500 W peak for the front driver, 400 W program and 800 W peakfor the rear driver, Impedance 8 Ω front driver & 16 Ω rear driver, Coverage cardiod, Frequency Range 37 Hz - 110 Hz. All complete as per approved drawings, tender specifications and direction of Engineer-in-Charge.
1536	Supply, installation, testing & commissioning of Ground stacked Subwoofer, 3 x 21\" drivers, two facing front and one radiating backwards operating in a seperate bass reflex chamber, Maximum peak SPL shall be 144 dB, Long-term handling capacity shall be 1000 W program and 4000 W peak for the front drivers and 500 W program and 2000 W peak for the rear driver, Frequency range 33 Hz - 84 Hz, Coverage cardiod, all complete as per approved drawings, tender specifications and direction of Engineer-in-Charge.
1537	Supply, installation, testing & commissioning of Front-fill Loudspeakers, 2 x 4.5\"LF drivers and 2 x 1.25\" HF Drivers. Maximum peak SPL shall be 123 dB, Long-term handling capacity shall be 150 W program and 500 W, Impedance 16 Ω , Coverage (h x v) 90°x 30°, Frequency Range 90 Hz - 17 kHz. All complete as per approved drawings, tender specifications and direction of Engineer-in-Charge.
1538	Supply, installation, testing & commissioning of Delay, Side fill and Image fill Loudspeakers, 2 x 8\" LF drivers and 1 x 1.4\" HF Drivers. Maximum peak SPL shall be 136 dB, Long-term handling capacity shall be 400 W program and 1600 W, Impedance 8 Ω , Coverage (h x v) 110° x 40°, Frequency Range 59 Hz - 18 kHz. All complete as per approved drawings, tender specifications and direction of Engineer-in-Charge.
1539	Supply, installation, testing & commissioning of Stage monitoring Loudspeakers, 15\" LF drivers and 1.3\" HF Drivers. Maximum peak SPL shall be 140 dB, Long-term handling capacity shall be 400 W program and 1600 W, Impedance 8 Ω , Coverage (h x v) 50° x 70° rotatable, Frequency Range 55 Hz - 17 kHz. All complete as per approved drawings, tender specifications and direction of Engineer-in-Charge.
1540	Supply, installation, testing & commissioning of Four Channel amplifier with inbuilt DSP, Maximum output power 4 x 5400/2700 W into 4/8 Ω ; Maximum output voltage/current 210 Vpeak / 78 Apeak; Sampling rate 44.1, 48, 96, 192 kHz; DSP Inbuilt Preset Memory; Signal processing with EQ,Delay, Array EQ, Array Delay, Speaker EQ, Crossover, FIR, Limiters, Source selection, pilot tone generation and detection. Output Equalizer ; Network connectivity and Network/datax1 1and with speaker presets, Separate input and output DSP ; Pilot Tone supervision at Analog inputs, switchover to alternative Source Selection; separate input and output DSP with Multi layer Group control for PRESETS etc. all complete as per approved drawings, tender specifications and direction of Engineer-in-Charge.
1541	Supply, installation, testing & commissioning of Four Channel amplifier withinbuilt DSP, 2400W @4 ohm; 2000W @8ohm ; Maximum output voltage 180Vpeak and 35Apeak current, Frequenc Response - 35 Hz to 25 kHz (±0.5 dB); Sampling rate 44.1 kHz/48 kHz/96 kHz; DSPInbuilt Preset Memory; Signal processing with EQ,Delay, Array EQ, Array Delay, Speaker EQ, Crossover, FIR, Limiters, Source selection, pilot tone generation and detection. Output Equalizer ; Networkconnectivity and Network/datax1 1and with speaker presets, Separate input and output DSP ; Pilot Tone supervision at Analog inputs, switchover to alternative Source Selection; separate input and output DSP with Multi layer GRoup control for PRESETS etc. all complete as per approved drawings, tender specifications and direction of Engineer-in-Charge.
1542	Supply, installation, testing & commissioning an Interface between d&b amplifiers and the Dante audio transport protocol with 16 AES3 digital output channels, 4 AES3 digital input channels, Integrated 5-port network switch offering network redundancy with primary and secondary connections for the Dante protocol, aswell as advanced functions such as Multicast Filtering and VLAN modes, sampling at 32 - 192 kHz with SRC(Sample Rate Conversion) capability, featuring a power supply suitable for mains voltages 100 V – 240 V, 50 – 60 Hz, with Overvoltage protection of up to 400 V, tender specifications and direction of Engineer-in-Charge.
1543	Supply, installation, testing & commissioning of OEM Rigging/mounting Frame for line array. all complete as per approved drawings, tender specifications and direction of Engineer-in-Charge.
1544	Supply, installation, testing & commissioning of OEM flush mounting kit for front-fills. All complete as per approved drawings, tender specifications and direction of Engineer-in-Charge.
1545	Supply, installation, testing & commissioning of OEM flush mounting kit for front-fills. All complete as per approved drawings, tender specifications and direction of Engineer-in-Charge.
1546	Supply, installation, testing & commissioning of OEM mounting bracket for delays, side-fills and image-fills. All complete as per approved drawings, tender specifications and direction of Engineer-in-Charge.
1547	Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
1548	Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW[1-3-1]
1549	Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW[1-3-2]
1550	Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.[1-6-1]
1551	Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.[1-6-2]
1552	Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete
1553	Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.[1-6-11]
1554	Supplying and erectingmodular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.[1-6-23]
1555	Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected.[1-6-29]
1556	Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected.
1557	Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthingand required accessories as per specification No: WG-PW/SW[1-7-19]
1558	Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthingand required accessories as per specification No: WG-PW/SW[1-7-20]
1559	Wiring for plug on board withSwitch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW[1-7-26]
1560	Supplying and erectingbulk head LED fittingmax. 10Wwith high transitivity diffuser withsystem lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg.,THD<10%,p.f. >0.95, operating range of140-260V, in built surge protection of 2.5 kV, Life class of50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.[2-1-15]
1561	Supplying and erecting CRCA powder coated corridor/passage light LED fitting (4 feet) Max. 17Wwith high transitivity diffuser withsystem lumens output of Min. 2000 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%,p.f. >0.95, operating range of120-270V, surge protection of 4 kV, Life class of50,000 Hrs. at L70B50, includingdriver, with end caps on provided PVC Block / wooden board with 3 years warranty.[2-1-17]
1562	Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.[2-10-15]
1563	Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification No. FG-FN/CF[2-10-22]
1564	Providing recess in brick wall suitable for erection of exhaust fan up to 450mm. sweep complete with grouting of nut, bolts, plastering and colour washing to match the colour of the wall for the wall thickness of 225 mm.[2-11-11]
1565	Supplying, erecting & marking SPMCB 6A to 32A, C-serieswith rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification No. SW-SWR/MCB [5-3-2]
1566	Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification No. SW-SWR/MCB [5-3-3]
1567	Supplyingand erecting single pole and neutral distributionboard (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification No. SW-SWR/MCBDB[5-4-8]
1568	Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame. [5-4-13]
1569	Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivitywithearth leakage trip indicationcomplete as per specification No. SW-RCCB/RCCB[5-6-1]
1570	Supplying, erecting & commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication completeas per specification No. SW-RCCB/RCCB [5-6-6]
1571	Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 4 Sqmm copper conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification No. CB-LT/CU
1572	Supplying, erecting& terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core10 sq. mm. copperconductorcompleteerected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipeas per specification No. CB-LT/CU[7-2-33]
1573	Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification No. EA-EP
1574	Supplying and erecting annealed bare copper wireof high purity of required sizesused forearthing onwall with necessarycopperclampsfixedon wall/cable/conduitwithscrews complete.
1575	SITC of Electric Traction Passenger Lift with · Rated capacity :- 4 Passenger/272Kg · Floors :- G+1 floor (2Stops/2 Landings) · Travel :- 3 to 4.2 mtrs· Location of Lift Machine:- MR/MRL · Rated speed :- 1.0mps VS· Car/Landing door clear opening of 700/800 mm wide x 2000 mm high · Clear Car size of 1100 mm wide x 1200 mm deep x 2250mm high · Lift shaft available having clear size of 1500 mm wide x 1500 mm deep, 1800 mm Pit depth,4200 mm Overhead. · Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(Non-claded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid Test Certificate issued by NABL accredited or Independent Test laboratory). Lift car enclosure made from SS 304 grade solid (Non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge.· COP with SS face plate having metallic push buttons with Braille code & lumiNous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor.· LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & lumiNous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings. Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters. The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class. ARD complete with necessary SMF VRLA batteries.· Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2 No minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min. 20\" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge.· Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves,suspension wire ropes/belts of adequate size & strength. Other mechanical parts such as \"T\" section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work.· MiNor civil work such as alteration work if any necessary for erection of landing door frames and it\"s accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification No. LFT.· General: - Job includes entire procedure of obtaining all necessary erection permissions & \"License to Work the Lift\" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning.
1576	SITC of Electric Traction Passenger Lift with · Rated capacity :- 10 Passenger/680Kg · Floors :- G+1 floor (2Stops/2 Landings) · Travel :- 3 to 4.2 mtrs· Location of Lift Machine:- MR/MRL · Rated speed :- 1.0mps VS· Car/Landing door clear opening of 800 mm wide x 2000 mmhigh· Clear Car size of1300 mm wide x 1350 mm deep x 2250mm high · Lift shaft available having clear size of 2000 mm wide x 2700 mm deep, 1800 mm Pit depth, 4200 mm Overhead. · Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(Non-claded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid Test Certificate issued by NABL accredited or Independent Test laboratory)Lift car enclosure made from SS 304 grade solid (Non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge.· COP with SS face plate having metallic push buttons with Braille code & lumiNous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor.· LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & lumiNous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings.Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters. The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class.ARD complete with necessary SMF VRLA batteries.· Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2 No minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min. 20\" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge.· Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves,suspension wire ropes/belts of adequate size & strength. Other mechanical parts such as \"T\" section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work.· MiNor civil work such as alteration work if any necessary for erection of landing door frames and it\"s accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification No. LFT.· General: - Job includes entire procedure of obtaining all necessary erection permissions & \"License to Work the Lift\" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning.
1577	SITC of Duplex Lift control system for two No. microprocessor/PLC based simplex lift controllers along with necessary software with programming and hardware e.g. logic board, necessary communication/control/data cabling laying in rigid PVC conduits/trunking etc. complete.
1578	Supplying and erecting minimum Three & above star rated submersible pump set suitable for erection on open well of 3.75 KW/5 HP with 415 V 50 c/s. A.C. supply, having delivery head from 43 to 11m and discharge from 120 to 840 litres. per minute & pipe of Suction 65mm / Delivery 50 mm diameter erected with necessary H type clamps as per specification No. WP-OSP
1579	Supplying and erecting flat flexible 3 core 4 Sqmm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete
1580	Supplying & erecting Water level controller 230/ 415V AC., Four way for under ground & Over head tank operation.
1581	Supplying & erecting of automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc

Also Visit

Tenders

Maharashtra Tenders

Electrical Industry Tenders

Electrical Work Tenders

Electrification Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Electrification Work At Honourable Balasaheb Thackeray Haridra Research And Training Centre,Vasmat,Dist.Hingoli, Basmat-Maharashtra

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Electrification Work At Honourable Balasaheb Thackeray Haridra Research And Training Centre,Vasmat,Dist.Hingoli, Basmat-Maharashtra

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us