|
| 1 | M&L for Washing rubbing down and stopping of distempered surfaces any type of wall incl preperation and then applying one coat of oil bound distemper on old plastered surface by Auto roller of any tint complete all as specified and directed. |
| 2 | M&L for Washing rubbing down and stopping of distempered surfaces any type of wall incl preperation and then apply two coat of oil bound distemper on old plastered surface by Auto roller of any tint complete all as specified and directed. |
| 3 | M&L for removal ofexisting treatment from old decorated plastered surface of wall by by Vaccum based sanding machineremoval of nails etc and filling cracks /hole with putty ,applying wall care putty upto 1mm thick as required (Multipurpose mixer shall be used for uniform and proper mixing of putty ) and then apply one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm by using auto roller upto 2nd floor complete all as specified and directed. |
| 4 | M&L for preparation of old plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of walls including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and directed. |
| 5 | M&L for preparation of old plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of ceiling including washing floors, cleaning glass, joinery,electrical fittings, wiring etc of drops and splashes complete all as specified and directed. |
| 6 | M&L for preparation of old decorated surfaces of wall by washing rubbing down and stopping of distempered surfaces of wall and applying one coat of oil emulsion distemper, including washing floors, cleaning glass, joinery, eletrical fittings, wiring etc, off drops and splashes complete all as specified and directed. |
| 7 | M&L for preparation of old surfaces of walls and applying one coat of exterior emusion paint 100% acrylic, in the pattern & colour as directed, including washing floors, cleaning glass, joinery, eletrical fittings, wiring etc, off drops and splashes complete all as specified and directed.Note : Pattern and colour as approved by GE. |
| 8 | Preparation of old painted wooden surfaces over 10 cm width or girth of any description and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 9 | M&L for preparation of old painted steel surfaces over 10 cm width or girth of any description and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 10 | M&L for writing letters or figures (block, Roman, Italic or Indian) n.exc 30 cm complete all as specified and directed. |
| 11 | Taking down cement plaster from brick walls including raking out joints, hacking for key and scrubbing down with water complete all as specified and directed. |
| 12 | M&L for rendering 15 mm thick (externally) in cement mortar 1:4 on brick or concrete surfaces finished even and smooth, using 3% WPC by wtof cement or as per manufacturers instructions complete all as specified and directed. |
| 13 | M&L for rendering 10 mm thick in cement mortar 1:6 on other than fair faces of brick or concretesurfaces and finishing the surface even and smooth (without using extra cement) complete all as specified and directed. |
| 14 | Supply only intergral water proofing compound complete all as specified and directed. |
| 15 | M&L for plastering 5 mm thick in cement mortar 1:3 on ceilingsurfaces and finishing the surface even and smooth complete all as specified and directed. |
| 16 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper complete all as specified and directed. |
| 17 | M&L for two coats of acrylicemulsion paint exterior grade camouflage painting over a coat of primer on External New wall surfacesincluding preparation of new wall surface complete all as specified and directed. |
| 18 | M&L for preparation of new undecorated surface of ceiling and applying three coats of white wash complete all as specified and directed. |
| 19 | Removing vegitation/plants from wall,roof, over chajjas water tank etc, growing in any position complete, including removing roots, bldgs upto 2 stories height including necessary scafolding and necessary tools complete all as specified and directed. |
| 20 | Dismantling of brick wall of stone/boulder masonary built in cement mortar complete all as specified and directed. |
| 21 | Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 22 | Dismantling wrought iron or mild steel work of any description and in any position complete all as specified and directed. |
| 23 | M&L for providing PCC 1:3:6 tupe C-1 (using 20 mm graded stone aggregate), in cement mortar 1:4 lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates complete all as specified and directed. |
| 24 | M&L for Providing precast cement concrete 1:2:4 (20 mm graded stoen aggrigate) in cement mortar 1:4 window or door cills, lintels, bressumers, steps,quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps,columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders(for stone walling) corbels, brackets, etc (of any section indicated), with plain fair faces,including chamfers, weatherings, throating etc and setting in mortar complete with joints to match complete all as specified and directed. |
| 25 | M&L for brick work with sub class \"B\" bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar (1:4) using old size bricks complete as in manholes, etc complete all as specified and directed. |
| 26 | M&L for Mild steel work in frame work such as grills, grantings etc with ends of bars shouldered and / or reviled, framed guard bars, barred iron doors ladders walk ways, raillings, frame work of water tanks and similar articles complete all as specified and directed. |
| 27 | S&F for Galvanised iron 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and strainin and fixing to any type of stranded rails straining bolts including securing or tying at crossing with and provision of galvanised MS wire, staples or steel pins all including dismantling complete all as specified and directed. |
| 28 | S&F for concertina coil made with razor barbed tape of 600 mm dia fixed with clips etc including dismantling of coil complete all as specified and directed. |
| 29 | M&L for 15mm thick rendering in cement mortar 1:4finishing the surfaces with fair and even without using extra cement complete all as specified and directed. |
| 30 | M&L for Preparation of new or previously untreated steel surface of any discription over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of redoxide primer complete all as specified and directed. |
| 31 | M&L for preparation of newly plastered surfaces of walls and applying exterier emulsiontwo coats, in camouflage pattern, any tinted over a coat ofsuitable primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc of drops and splashes complete all as specified and directed. |
| 32 | M&L for precast reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cover slab of manholes, septic tank etc,set in cement mortar 1:4 including necessary form, moulds etc and including taking out/removal of existing unserviceable cover slab from manholes /septic tank complete all as specified and directed. Note :- Reinforcement shall be measuredand paid separately) |
| 33 | M&L for Mild steel TMT bars 10 mm dia and over as in reinforcement cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed. |
| 34 | Demolition of RCC n.exc 15cm thickness complete all as specified and directed. |
| 35 | M&L for Fe-410-W(GdeE-250) quality-B Steel Rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates complete all as specified and directed. |
| 36 | Taking out of old air termination rod of any type and any size from building including dismantling and removing (except serviceable strips for re-fixing) materials from work site complete all as specified and directed. |
| 37 | S&F for air termination single pointed, copper rod 12mm dia and 300 mm long fixed on galvanised iron pipes with copper/ aluminium/ GI strip for earth conductivity to ground complete all as specified anddirected. Note: MS /PCC work shall be measured and paid seperately. |
| 38 | S&F for air termination single pointed, copper rod 18 mm dia and 600 mm long fixed on galvanised iron pipes with copper/ aluminium/ GI strip for earth conductivity to ground complete all as specified anddirected. Note: MS /PCC work shall be measured and paid seperately. |
| 39 | S&F for air termination single pointed, aluminium rod 12mm dia and 300mm long fixed on galvanised iron pipes with copper/ aluminium/ GI strip for earth conductivity to ground complete all as specified and directed.Note: Pipe/ PCC work shall be measured and paid seperately. |
| 40 | Re-fixing of old serviceable tilted air termination rod of any size and type after straightening & dressing with and including suitable nut, bolts and washers to earth strip complete all as specified and directed.Note: Pipe/ PCC work shall be measured and paid seperately. |
| 41 | Taking down old Copper/ GI/ Aluminium Strip of any size and any type from building/hangar (roof/down conductor)/ pipe/ trench including dismantling and removing (except serviceable strips for re-fixing) materials from work site complete all as specified and directed. |
| 42 | S&F for copper strip 20mm x 3mmwith fixing screws for conductors/ earth lead including brazing and nut bolts jointing at all joints for building/ equipment laid through pipe/ trench/ surface complete all as specified and directed. |
| 43 | S&F for galvanised iron strip 32mm x 6mm with fixing screws for conductors/ earth lead including welding and nut bolts jointing at all joints for building/ equipment laid through pipe/ trench/ surface complete all as specified and directed. |
| 44 | S&F for aluminium strip 25mm x 3mm with saddles/ insulators and fixing screws for roof/down conductors/ earth lead including brazing and nut bolts jointing at all joints for building/ hangar (roof/down conductor)/ pipe/ trench complete all as specified and directed. |
| 45 | Re-fixing of old serviceable (serviceable strips as obtained from taking down) Copper/ GI/ Aluminium Strip of any size and type after straightening & dressing for fixing and making good to disturbed strip complete all as specified and directed. |
| 46 | S&F in replacement of saddle/insulator for refixing of earth strip with fixing arrangement in roof/ wall conductors of building/ hangar complete all as specified and directed. |
| 47 | Taking out of old unserviceable test point terminal block of any type and any size including dismantling and removing materials from work site complete all as specified and directed. |
| 48 | S&F for gun metal black or phosphorus bronze size 75mm x 75mm x 25mm drilled screwed including 3 Nos, 8mm dia and 25mm long neckhead screws including MS box 2mm thick of suitable size for protection of test point terminal complete all as specified and directed. |
| 49 | Taking out old unserviceable GI tubing of 20/ 40mm bore any type from trenches/ floor/ roof/ wall/ fixed to pole including dismantling and removing materials from work site complete all as specified and directed. |
| 50 | S&F for GI tubing 20mm bore (Medium grade) in trenches/ floor/roof/ wall/ fixed to pole with proper size of clamp nuts and bolts complete all as specified and directed. |
| 51 | S&F for GI tubing 40mm bore (Light grade) in trenches/ floor/ roof/ wall/ fixed to pole with proper size of clamp, nuts and bolts for earth strip protection/ lightening conductors/ rod complete all as specified and directed. |
| 52 | S&F in replacement of GI water tap 15 mm with all fittings complete all as specified and directed. |
| 53 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of pipe/ cable or other items and getting out soil in soft/ loose soil complete all as specified and directed. |
| 54 | Removing excavated material not exceeding 50 mtr and depositing where directed in a level not exceeding 1.5 mtr above the starting point of any type of soil complete all as specified and directed. |
| 55 | Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm complete all as specified and directed. |
| 56 | S&F in replacement of GI funnel with wire mesh for earting pits of existing size complete all as specified and directed. |
| 57 | M&L for dismantling of PCC earth pit chamber and making new PCC earth pit chamber of size as per electrical plate No. 3 of SSR-2009 Part-I with PCC (1:2:4) type B1 with pre cast RCC 1:2:4 type BI cover slab 54cm x 54cm x 5cm reinforce with 8mm dia bar TMT @150mm centre to centre both ways with one handle for lifting made out 8mm dia MS bar with wire mesh funnel including excavation and earth work as required at site complete all as specified and directed. |
| 58 | S&F in replacement of cross arms bracing supports clamps and back plates fabricated from structural steel section including nut, bolts, washers, welded, binding, cold as hot drilling holes for bolts in any shape or size as required duly painted with two coats of aluminium paint over a coat of red oxide primer after preparation of surface complete all as specified and directed. |
| 59 | M&L for earthing result testing for any type of earthing such as GI plate/copper plate/chemical/bore earthing connected with and for HT panel, LT panel,Equipments, Lightening arrestor, DG sets,Transformer etc in any position and any place under GE (AF) Mohanbari station using Digital Earth meter in 3M method and E-N voltage at main DBs and register the result as per performa provided in earth test register duly signed by JE and Engr in charge complete all as specified and directed. |
| 60 | M&Lfor painting of Pit coverwith synthetic enamel paint as per approved colour code followed in AF Station complete all as specified and directed. |
| 61 | M&L forearth pit marking sheet made of MS black sheet of size 150 mm x 150 mm x 6 mm including 16 mm dia rod weldede to sheet complete all as specified and directed. |
| 62 | Taking out old unserviceable earthing pit of any type complete with connected accessories including dismantling and removing materials from work site complete all as specified and directed. |
| 63 | M&L for earthing complete with copper plate 600mm x 600mm x 3.15mm thick electrode and 20mm x 3.15mm copper strip as earthing lead burried directly in ground vertically (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, the earth plate surrounded by adequate quantity of charcoal dust and common salt to a packed thickness of 15 cm on all sides connected to copper strip 20 x 3mm as earth lead by means of tinned copper/ brass bolts, nuts, check nuts and washers (including brazing) connected to main switch board / panel/ test point at the other including necessary earth work in any type of soil, returning filling in and removal of surplus soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC 1:2:4 type BI cover slab 54cm x 54cm x 5cm reinforce with 8mm dia bar TMT @150mm centre to centre both ways with one handle for lifting made out 8mm dia MS bar with wire mesh funnel, 20mm GI tubing medium grade for watering and 40mm GI tubing light grade for protection, test point, testing on completion all as shown in Electrical Plate No 3 of SSR Part-I complete all as specified and directed. NOTE : (i) The earthing pit should be provided with proper earth pit and pit cover. Pit cover should be painted with synthetic enamel paint of approved colour and pit number to be marked onpit cover as per colour code followed in AF Station.(ii) If the desired earth registance is not achive during testing as per IS the complete earthing shall be carried out by the contractor at his own cost and no extra claim shall be admissable. |
| 64 | M&L for earthing complete with galvanised steel earth plate 600mm x 600mm x6.3mm thick elecrode and 32mm x 6mm galvanised iron strip as earthing lead burried directly in ground vertically (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, the earth plate surrounded by adequate quantity of charcoal dust and common salt to a packed thickness of 15 cm on all sides connected to GI strip 32mm x 6mm as earth lead by means ofbolts, nuts, check nuts and washers (including welding) of galvanised iron or steel and connected to main switch board / panel/ test point at the other including necessary earth work in any type of soil, returning filling in and removal of surplus soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC 1:2:4 type BI cover slab 54cm x 54cm x 5cm reinforce with 8mm dia bar TMT @150mm centre to centre both ways with one handle for lifting made out 8mm dia MS bar with wire mesh funnel, 20mm GI tubing medium grade for watering and 40mm GI tubing light grade for protection, test point, testing on completion all as shown in Electrical Plate No 3 of SSR Part-I complete all as specified and directed.NOTE : (i) The earthing pit should be provided with proper earth pit and pit cover. Pit cover should be painted with synthetic enamel paint of approved colour and pit number to be marked onpit cover as per colour code followed in AF Station.(ii) If the desired earth registance is not achive during testing as per IS the complete earthing shall be carried out by the contractor at his own cost and no extra claim shall be admissable. |
| 65 | M&L for earthing complete with galvanised steel earth plate 600mm x 600mm x6.3mm thick elecrode and 4mm galvanised iron wire as earthing lead burried directly in ground vertically (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, the earth plate surrounded by adequate quantity of charcoal dust and common salt to a packed thickness of 15 cm on all sides connected to GI wire 4mm as earth lead by means ofbolts, nuts, check nuts and washers (including welding) of galvanised iron or steel and connected to main switch board / panel/ test point at the other including necessary earth work in any type of soil, returning filling in and removal of surplus soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC 1:2:4 type BI cover slab 54cm x 54cm x 5cm reinforce with 8mm dia bar TMT @150mm centre to centre both ways with one handle for lifting made out 8mm dia MS bar with wire mesh funnel, 20mm GI tubing medium grade for watering and 20mm GI tubing light grade for protection, test point, testing on completion all as shown in Electrical Plate No 3 of SSR Part-I complete all as specified and directed.NOTE : (i) The earthing pit should be provided with proper earth pit and pit cover. Pit cover should be painted with synthetic enamel paint of approved colour and pit number to be marked onpit cover as per colour code followed in AF Station.(ii) If the desired earth registance is not achive during testing as per IS the complete earthing shall be carried out by the contractor at his own cost and no extra claim shall be admissable. |
| 66 | M&L for recharging of earthing pits by filling of magnesium sulphate, 100% water soluble fertilizer type in earthing pits complete all as specified and directed.Note:- (i)Recharging materials shall be soluble in water and to be filled/ poured in earth pit after mixing in water in appropriate quantity.(ii) Recharging shall be carry out at site on requirement basis as per direction of Engr-in-Charge. |
| 67 | M&L for recharging of earthing pits by filling of common salt in earthing pits complete all as specified and directed.Note:- (i)Recharging materials shall be soluble in water and to be filled/ poured in earth pit after mixing in water in appropriate quantity.(ii) Recharging shall be carry out at site on requirement basis as per direction of Engr-in-Charge. |
| 68 | Material and labour laying well burnt old sizebricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified. |
