Tender For Maint Of Runway Shoulder, Grass Cutting And Cleaning Of Runway Drains, Earth Filling, Renewal, Leveling And Certain B/R Repairs To Various Installation At Af Stn Dinjan Under Ge (Af) Mohanbari
Tender Value
42 Lakhs
Estimated cost
Bid Submission
14 Jul 2025
0 days left
EMD
84000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dinjan → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Maint Of Runway Shoulder, Grass Cutting And Cleaning Of Runway Drains, Earth Filling, Renewal, Leveling And Certain B/R Repairs To Various Installation At Af Stn Dinjan Under Ge (Af) Mohanbari
BOQ
| Sl. No. | Item Description |
| 1 | Cutting of grass of shoulder/wing areas of runway and taxi track area with mechanical grass cutter suitable for runway area with cutting up to 50 to 150 mm height of grass and removing grassesto a distanceexc 250m but not exc 500m complete all as specified and directed. |
| 2 | Cutting and cleaning of grown vegetation as in edges n exc width of 1.5 mtr alongwith runway drains including removal and disposal of the grass/vegetation to a distanceexc 250m but not exc 500m complete all as specified and directed. |
| 3 | Lifting of RCC drain cover and cleaning of existing runway drains of width not exceeding 0.65m and average depth not exceeding 1.00 Mtr by removal of silt,sludge etc from drain bed to ensure free flow of strom waterand placing of drain cover on its existing position after cleaning and disposal of silt, sludge etc from drain bed complete all as specifeied and directed. |
| 4 | M&L for soil filling or restoration of eroded or damaged runway shoulder(sides) cuased by rainfall using approved earth including cutting/filling of eroded sections,dressing and compaction to restore the side profile to achieve uniform slope and profile, as per the original croos section or complete all as specified and directed. Note- Rate shall include the cost of labour, earth, compaction ,surface dressing incl carrying approved soil out side MoD land. |
| 5 | M&L for preparation of old/new concrete/bituminous painted surface and applying one coat of water based road marking paint of white/yellow or orange shades as approved on surfaces of any description over 10 cm width of grith not otherwise described with rewritting letters, figures, symbols, line etc complete all as specified and directed. |
| 6 | Providing mechanical earth movers plant /JCB of capacity 7.50 ton for levelling of existing ground,complete all as specified and directed.Note :- Maintain logbook details of date and time during operation of the JCB/Earth movers, location shall be maintained and jointely signed by Engr-in -Charge and contractor .JCB/Earth movers should not be 5 years vintage.The accounting of time of earth movers will be counted during working only in Tech Area. Contractor shall produce operator driving license and all necessary documents of plants prior to use.Unit rate shall be deemed to be included for providing plant (JCB/Earth movers), operator,helpe and FOL(Fuel,oil and lubricants) etc and nothing extra shall be payable on this account. |
| 7 | Taking down existing roof treatment including cement mortar bedding any thickness from roofs and cleaning the surface with wire brushes/brooms to remove dust and clean the surface with water and removing the rubbish not exc 500 mtrs complete all as specified and directed. |
| 8 | Demolition of existingplain cement concrete of any description and any position not otherwise specially provided forincluding cleaning the surfaces with wire brushes/brooms to remove dust and clean with water, and removing the rubbishat any distances complete all as specified and directed. |
| 9 | M&L for PCC 25mm thick 1:2:4 type B-0 (using 12.5 mm graded stone agg) as in roofs, complete all as specified and as directed. |
| 10 | M&L for 10 mm thick cement plaster in CM 1:3 with WPC 200ml per bag of cement on concrete surfaces of roof and finished the surface even and fair complete all as specified and directed. |
| 11 | M&L for preparing the roof surfaces with clean, dust free on dry surfaces for water proofing treatment as follows :- (a)One coat of water based bitumen emulsion primer @ 0.30 Kg/SQM is applied on the surface to be water proofed. (b)3mm thick APP based polymeric membrane laid on the hot bitumen applied surface.With overlaps maintained at 10 cms and are completely thermo-fused by flame torch.(c)Finished with a coat of bituminous aluminum primer @ 110 grams / Sqm completeall as specified in application manual of the company and as directed. |
| 12 | Demolition Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles including removing rubbish from worksite outside MD land at any distance complete all as specified and directed. |
| 13 | M&L for Brickwork with first class bricks having crushing strength of 75 kg/sqcm, straight or curved on plan excd 6 M mean radius inbuilt in cement and sand mortar 1:6 complete all as specified and directed. |
| 14 | Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc. including removing of rubbish material from work site complete all as specified and directed. |
| 15 | M&L for rendering5mm thick in cement mortar 1:3fair surface of ceiling finishedsurfaceeven and smoothwithout using extra cement complete all as specified and directed. |
| 16 | M&L for rendering 15 mm thickin cement mortar 1:6 on other than fair faces of brick or concrete surfaces finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 17 | M&L for rendering 15 mm thickin cement mortar 1:4 on fair faces of brick or concrete surfaces finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 18 | M&L for preparation of new plastered surafces of ceilings and applying two coats of white washincluding washing floors, cleaning glass, joinery,electrical fittings, wiring etc, of drops and splashes complete all as specified and directed. |
| 19 | M&L for preparation of newly plastered surfaces of walls and applying two coats of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc, of drops and splashes complete all as specified and directed. |
| 20 | M&L for preparation of newly plastered surfaces of walls and applyingtwo coats of cement based paint, white or tinted including washing floors, cleaning glass, joinery, electrical fittings, wiring etc, of drops and splashes complete all as specified and directed. |
| 21 | M&L for preparation of old plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of walls including washing floors, cleaning glass, joinery,electrical fittings, wiring etc, of drops and splashes complete all as specified and directed. |
| 22 | M&L for preparation of old painted wooden /wood based materials surfaces of any description, not otherwise described, over 10 cm width or girth and paintingone coat with synthetic enamel paint (1st quality) including cleaning, stopping and rubbing down and removingcomplete all as specified and directed. |
| 23 | M&L for preparation of old painted steel and iron surfacesof any description , not otherwise described,over 10 cm width or girth and painting one coat with synthetic enamel paint including cleaning, stopping and rubbing down and removing all drops etc complete all as specified and directed. |
| 24 | Taking down Chowkhats or framesn.exc 1.5 Sqm each with shutters (without taking off shutters from the frames) andmaking good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and directed. |
| 25 | S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 26 | S&F for 3 mm thick sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm in each pane, glazed with putty or fixed with beads complete all as specified and directed. |
| 27 | M&L for mild steel framed work such as grills , gratings, etc, with ends of bars shouldered and/ or riveted, or forged in to spikes, framed guard bars,barred iron doors; ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 28 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed including removing of demolished material from work site at any distance outside MD land complete all as specified and directed complete all as specified and directed. |
| 29 | M&L for machine cut kota stone slab flooring 20-25mm thickin floors and jointed in grey cementwith admixture of pigmentto match with shade of kota stone over 20mm thick screeding incement mortar 1:6 includingrubbing and polishing complete all as specified and directed.Note : Screed bed shall not bemeasured and paid separately. |
| 30 | M&L for machine cut kota stone slab flooring 20-25 mm thick on vertical surfaces such as skirting/ dado, over and including cement screedbed 10mm thick in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slabe incl rubbing and granite polishing complete all as specified and directed. |
| 31 | M&L for coloured chequered cement concrete tiles 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigments in footpath/ floors complete all as specified and directed. |
| 32 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thick above or below ground level, including removing of demolished material from work site at any distance outside MD land complete all as specified and directed. |
| 33 | M&L forhard core of broken stone or bouldersaggrggate of gauge not exc 63mm deposited, spread and levelled in layer n.exc 15 cm thick watered and rammed to a true surface complete all as specified and directed. |
| 34 | M&L for for plain cement concrete type B-1 (1:2:4), using 20 mm graded crushed stone aggregate, 40 mm thick, asin path / flooring finished even and smooth without using extra cement complete all as specified and directed. |
| 35 | M&L for75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) as in plinth protection, cemented path, hard standing and finished surfaces even and fair complete all as specified and directed. |
| 36 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover fillets complete all as specified and directed. |
| 37 | M&L for non asbestos fibre cement building board, 4mm thick, fixed to aluminium frame work with screw as in ceiling complete all as specified and as directed. |
| 38 | S&F for aluminium anodised snap grid frame work as in false ceiling all as specified size of grid 605 x 605 mm with aluminium main T section of size 36.5 x 23.5 x 1.6 mm and cross \"T\" of size 23.5 x 23.8 x 1.6 mm with aluminium wall angle of size 36.5 x 23.5 x 1.6mm with suspender complete all as specified and directed. |
| 39 | M&L for preparation of new surafces of ceilings and applying three coats of white wash including washing floors, cleaning glass, joinery electrical fittings, wiring etc of drops and splashes complete all as specified and directed. |
| 40 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but notbacking ), removing serviceable tiles to store and rubbish off the premisesoutside MD land at any distance complete all as specified. |
| 41 | M&L for Non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but nexc 0.18 sqm in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over and including screed bed or bedding layer 15mm thickin cement morter 1:6 for laying tiles complete all as specified and directed. Note: Screed bed shall also deemed to be included in the quoted rate by the contractor. |
| 42 | M&L for glazed ceramic colouredtiles, 350 mm x 250 mm x 7mm/ 450 x 350 x 7mm thick, in dado skirting and vertical surfaces set and jointed in neat cement slurry and pointed in white cement to match including rendering 10 mm thickin cement morter 1:4 for laying tiles complete all as specified.Note: Screed bed shall also deemed to be included in the quoted rate by the contractor. |
| 43 | S&F in solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supply & fixing in openingas per specification & drawing complete all as specified and directed. |
| 44 | S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail andbottom rail on either sideas gap insert for top rails bottom rail, panelling of plain colour PVC sheet to be fitting in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drg complete all as specified and directed. |
| 45 | Taking down chowkats or frame exc 1.5 sqm but n.exc 4 sqm each.and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and directed. |
| 46 | M&L for 105 x 60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plate, etc complete all as specified and directed. |
| 47 | M&L for PCC 1:3:6 type C-2 (using 40mm graded aggregate) as in hold fast block, filling in pressed steel chowkats including necessary form work etc complete all as specified and directed. |
| 48 | Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and directed. |
| 49 | S&F for Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 50 | Dismantling of plain or corrugated, semicorrugated ,etcsheets in roof coveringsincluding removing of unserviceable material from work site complete all as specified and directed. |
| 51 | S&F forPre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 52 | S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge to wall, fixed with self tapping screws complete all as specified and directed. |
| 53 | Dismantling wroughtiron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 54 | M&L for rolled mild steel as in roof truss, purlins, rails and fastenings and similar work including distance pieces, cleats etc conforming to Fe-410-W (Gde-E 250) including cutting and welding as required complete all as specified and directed. |
| 55 | M&L for framed work as in steel gate framed and side hung incl pintle hinges, stops hand made sliding bolt monkey tail bolts etc complete all as specified and directed. |
| 56 | S&F for butt Hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified and directed. |
| 57 | S&F for Aluminium handles, cast type anodised, 150 mm long complete all as specified and directed. |
| 58 | S&F for Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt complete all as specified and directed. |
| 59 | S&F for aluminium anodised slidingdoor bolt 250mm long with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 60 | M&L for preparation of untreated new wooden surface of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint, with a coat of pink primer complete all as specified and directed. |
| 61 | M&L for preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 62 | Taking down shutters, repairs and refixing of any description in same opening exc 1 Sqm and n. exc 2 Sqm each complete all as specified and directed. |
| 63 | Demolition of cement concrete ( reinforced ) of any description and in any position not otherwise specifically provided forincluding removing rubbish from worksite outside MD land at any distance complete all as specified and directed. |
| 64 | M&L for RCC 1:2:4 type B-1(using 20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span and similar article including necessary formwork etc complete all as specified and directed. |
| 65 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 66 | All as per item No 65 above but 6 mm to 8 mm dia complete all as specified and directed. |
| 67 | Manufacturing, supplying and fixing retro reflective Mandatory/ Regulatory sign boards of 900 mm square with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours). Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc complete as per drawing, specification and direction of GE. |
| 68 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 69 | M&L for priming surfaces & applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 complete all as specified and directed. |
| 70 | Material and labour laying well burnt old sizebricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified. |
AI Tender Summary
Tender Timeline
Jun 24, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 15, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender