|
| 1 | (A) Road WorkClearing and grubbing road land including uprooting rank vegetation, grass, bush, shrubs, saplings and trees of girth upto 300mm, removal of stumps, disposal of unserviceable material and stacking of serviceable material upto 1000 m from road boundry as per MoRTH Specification : 201 By Mechanical Means In area of thorny jungle |
| 2 | Compaction of original ground with maximum of six passes of 8-10 tonnes power roller including filling depression occurring during rolling [MoRTH Specification : Clause 305.3.4] |
| 3 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5with lead500mtr to 1000 mtr |
| 4 | Compensation for earth, taken from private land with all lead and lift (Land to be arranged by private negotiations by the contractor) [MoRTH Specification : Clause 301 to 305]. |
| 5 | Providing, laying, spreading and compacting specified graded crushed stone in sub-base course including premixing the material at OMC in mechanical mixer (Pug mill), carriage of mixed material, laying in uniform layers with motor grader, F.E.loader on a prepared surface and compacting with vibratory compactorto achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of diversion complete.[MoRTH specification Clause 401] with all lead |
| 6 | Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured).Grading as per MoRTH specification : Table 400-1,400-2 with CBR value not less than 15To achieve 95% Proctor density |
| 7 | Providing, laying, spreadingand compacting crushed gradedstone aggregate of as per table 400-10 and 400-11 to Wet Mix Macadam specificationincludingpremixing the material with water to OMC in mechnical mixer as per approved design mix, carriage of mixed material by Tipper to site, laying inuniform layers with motor grader/F.E. Loader/paver finisher in sub base / base course onawellprepared under base and compacting with vibratory roller to achieve the desired density including lighting, guarding,barricading andmaintanceof diversion etc. (MoRTH specification:Clause 406)bymechanicalmeanswith all lead |
| 8 | Providing and applying primer coat over prepared surface or granular base with bitumen emulsion as per IS: 8887 & manufacturer’s specifications @ 8.5 kg /10 sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures including cleaning of road surface as per MoRTH specification CIause- 502,112 |
| 9 | Providing and applying tack coat with bitumen emulsion on the prepared surface including cleaning as per IS : 8887 & manufacturer’s specifications @ 2.75 kg /10sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MoRTH specification CI.503,112 |
| 10 | Providing and laying Dense Bituminous Macadam on prepared surface with specified graded crushed aggregates as per table 510 and design mix for base/binder course including loading of material with F.E loader, heating of binder (including cost of antistripping compound wherever required) aggregate and filler in hot mix plant 40-60 TPH transporting the mixed material by tippers and laying with sensor paver finisher as per clause 507.3.5 to the required level and grade, rolling by self propelled power rollers and vibratory rollers or pneumatic tyred roller 150-250KN. TP=0.7MPa to achieve the desired density (approved by the department) but excluding cost of primer/tack coat. [MoRTH Specification : Clause 507,112] with 4.50 % Bitumen with all leadusing bitumen grade (VG-30) |
| 11 | Providingandlayingbituminous concrete as per design mix on preparedsurface with specified graded stone as per table500 - 18 for wearing course including loading of aggregate with F.E. Loader and hot mixing of binder (including cost of anti-stripping compound, wherever required) and 3% cement filler with aggregates in hot mix plant 40-60 TPH Transportingthemixmaterial with tipper to paver and laying with sensor paver finisher (as perclause507.3.5)tothe required level, gradesandrollingwithvibratorycompactor and pneumatic tyred roller 150 - 250 KN,TP = 0.7 MPa, to achieve thedesired density (approved by the department) excluding cost of primer/tack coat (MoRTH Specification : Clause -509,112) with all lead 30-45 mm compacted thickness with 6% binder grading - 2 with all lead of mix materialWith straight run bitumen grade VG-30 |
| 12 | Providing, laying & fixing in position RCC spun or hume pipes ISI marked with proper jointing in required slope packed in the gasket of hume or spun yarn and neatly finished with rich grout of cement moratar 1:3 or having flexible rubber ring joint made with prefectly air and water tight including testing of joints as per MoRTH Specfication : Clause : 1000 & 2900 NP - 3,600 mm dia |
| 13 | (B) ROAD FURNITURES & F in position precast R.C.C. stone (M-15 mix) of standard IRC design including finishing in cement sand mortar 1:3, painting with enamel paint, printing letters and numerals etc. complete (MoRTH specifications clause : 800). |
| 14 | Ordinary km stone |
| 15 | 200 m stone |
| 16 | SupplyofMandatory / Regulatoryretroreflective sign boards 60 cm dia made out of 2.0mm thick aluminium sheet face to be fully covered by white/ blue high intensity grade retro reflective sheeting with Red/white symbol, cut out or screen printed back ground with epoxy paint, complete confirming to MoRTH specificationsCIause. 801 with angle iron post 65 x 65 x 6mm 3Mtr. long. |
| 17 | Supplyofcautionary / warningsignboard90cm equilateral triangle made out of 2.0 mm thickaluminumsheetfacetobe fully covered by white/blue high intensity grade retro reflective sheeting with Red / white symbol,cut out or screen printed background with epoxy paint complete confirming to MoRTH specificationsclause. 801 with angle iron post 65 x 65 x 6 mm. 3 mtr. long |
| 18 | Supplyofinformatory / retroreflective sign boardsize60 x 80 cmmade out of2.0 mm thick aluminum sheet face to be fully covered by white / blue high intensity grade retro reflective sheeting withRed/ white symbol, cut out or screen printed background with epoxy paint, complete confirming to MoRTH specificationsclause 801 with angle iron post 65 x 65 x 6 mm, 3 Mtr. Long. |
| 19 | Supply of Retro-reflective sign boards size 1800x1200 mm made out of 2 mm thick aluminium sheet duly framed with 40 mm M.S. black tube (Medium Class) as per IS-1239 (Part-I) 1979 with Inner support of M.S. flat 12x3 mm whole structure is fixed with two supports each side 75 mm long and 40 mm M.S. black tube on two posts of 60 mm diaM.S. black tube (Medium class) as per 1239 (Part-I ) 1979 2.03 metre long each and also provision of hold fasts of M.S. bars 12 mm and 25 cm long two on each post. The sheet has to be stove enameled or epoxy painting one side and other side retro-reflective high intensity and black non reflective letter in non reflective sheet. The standard letters and numbrals have to be made as per IRC 30-1968 and the board shall be conformed to the MoRTH specificationsclause. 801 Post and outer frame of board to be painted with black and white strips of synthetic enamel paint with black and white strips. |
| 20 | SupplyofRetro - reflective Name Board size600 x 900 mm made out of 2mm thick aluminium sheetfixedonpost and frame made out or angle iron 50 x 50 x 6 mm, 3Mtr. long using stainlesssteelnutboltsof8 mmdia, aluminium sheet is coveredwithhighintensity grade Retro-reflective sheeting and non reflective letters in black, post duly painted in black and white synthetic enamel, complete in all respect.ConfirmingtoMoRTH specificationsclause. 801 |
| 21 | Supply of Shevron sign of size 600x450 mm made out of aluminum sheet 2 mm thick both side with fixing provision on M.S. angle iron post 50x50x6 mm 3 M long screwed with stainless steel nut bolts of 8 mm dia, plate is covered by high intensity grade retro-reflective sheeting and black reflective arrow, complete in all respect. |
| 22 | P&F delinator with 30 cms diaRCC hume pipe ( IS-Marked) pipe 1.00M long 40 cms embedded in earththe inside of pipe shall be filled with cement concrete 1:4:8 ( 1 cement : 4 coarse sand : 8 coarse aggregate 20 mm nominal size ) with semi circular hump at top the pipes shall be painted 15 cms wide alternate strips with black/ white with enamel paint (Black strip at top) with red round reflector 7.5 cms dia at top on side facing the traffic and opposite side (as per IRC -79 ) |
| 23 | Providing and fixing CAT’s eye made of aluminium alloy size 75x100x22mm having 21 biconvex lenses embedded in circular disk of AS plastic on each side on road surface complete including all material, labour, diversion. |
| 24 | Providing and laying of hot applied thermo plastic compound inclusive of type-1 reflectorising glass beads as per table 800.3, 800.4 applied in uniform thickness of at least 2.5 mm and spread uniformlywith reflectorising glass beads type-2 in addition @ 250 gm/scm with a road marking machine as per IRC : 35 complete with traffic diversion arrangement as per MoRTH specification clause 803.4. |
| 25 | P& F Mukhya Mantri Sadak Yojana logo for roads funded by State road fund having M.S. Definition plate of 1.6mm thickness frame to steel hollow dsection of 75mm x 75mm, 2.5m long stove enamelled paint with hold fast including paint logo as per approved design and colours. The logo shall be made out of 1.6mm thick circular plate fix on 1200mm x 150mm rectangular steel base plate 1.6mm thick, the base of circular shall be plain at the junction of base plate. The size of definition plate shall be 1500x600mm and embedding the posts by M-15 mix C.C. block 300x300x600 mm including lettering / writing and painting etc. complete in all respect |
| 26 | Installation of sign boards having the posts like mandantory, cautionary and informatory boards including excavation, fixing of posts in 300 mm dia. RCC hume pipe (IS marked) 1.20 m long, 75 cm embedded in ground, the in side of pipe shall be filled with cement concrete 1 : 4 : 8 with semi-circular hump at top, the pipe shall be painted white with enamel paint including transportation etc. complete. |
| 27 | For single post |
| 28 | For double post |
| 29 | Providing and fixing Hazard marker made out of 2 mm thick M.S. sheet size 300 x 300 x 3 mm framed with angle iron 25 x 25 x 3 mm and fixed on channel posts 75 x 40 x 6 mm and hold fast at bottom whole body is painted in white stoving enamel and 6 Nos, 5 cm dia. reflective sheet on white reflective back ground with additional boarder of 1.25 cm all around it. |
| 30 | Supplying, hoisting and fixing in position overhead sign with a corrosion resistant 2mm thick aluminium alloy sheet with heigh intensity grade retro-reflective sheeting of encapsulated lens exclusive lettering, border and signs type with vertical and lateral clearance installed over a designed support system of aluminium alloy or galvonised steel trestles and trusses of sections and type as per structual design requirements and approved plans. As per MoRTH specifications : Clause 801 & 802. |
| 31 | Truss and vertical support |
| 32 | Aluminium alloy plate fixed with heigh intensity grade sheeting. |
| 33 | Construction of Pedestal of size 5.50\" x 5.50\" x 1.25\" in stone masonary in CM 1:6 as per design and drawing complete with 25 mm thick plaster in CM 1:4 plaster and weather coat paint |
| 34 | Supply & Fixing of one side polished Black granite stone 20 mm thick of size 3\" x 2\" with engraved and gold colour painted letter ( upto 200 letter) & border as per direction of engineer in charge on existing pedestals including transportation |
| 35 | Providing and Erecting typical Citizen\"s information Board as per approved drawing & specification of MORD made of Two plates of Aluminium Composite Materials (ACM), material specifications as per Clause 1701.3.7 of size 900 mm x 750 mm size riveted over welded M.S. angle iron frame of 25mm x 25mm x 5 mm size on back on edges. Frame will be welded to two nos. 75 mm x 75 mm (12 SWG) sheet tubes posts placed at 1000 mm apart centre to centre these posts will be embedded in cement concrete M15 grade blocks of 450 mm x 450 mm x 600 mm below ground level. The lettering and borders, etc. of plates shall be as per clause 1701.4.6 Messages/Borders. All the sections of frame and posts will be painted with primer and two coats of Epoxy paint. The steel tube below ground level will be painted with three coats of Epoxy paint. The design, painting and lettering shall be done as per approved drawing and MoRDSpecification Clause 1700 |
| 36 | (C) CD WORKS & PROTECTION WALLEarthwork in excavation in foundation trenches etc. not exceeding 2 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil 3m. Clear from the edge of excavation and subsequent filling around hume pipes/masonry in 15cm layers with compaction including disposal of all surplus soil as directed within a lead of 1000 metres.[MoRTH Specification : Clause 301,304].Hard soil with pick work |
| 37 | Earth work in excavation for foundation of structurecompletewith all lift, dewatering, shoring and shuttering etc. including refilling of trenches in 250 mm layers, ramming, watering and disposal of surplus earth with all lifts and lead upto 1000 meters exclusive of compensation of earth as per MoRTH specification Clause 301 to 305 In hard soilDepth upto 3 meter |
| 38 | Earth work in excavation in foundation trenches etc.in drains and channels etc. not exceeding 2m.depth, including dress-sing of bottom and sides of trenches, stacking the excavated soil 3m clear from the edge of excavation including disposal of surplus soil as directed within a lead of 1000 metres [MoRTH Specification : Clause 301,304]Hard soil with pick work |
| 39 | Earth work in excavation for foundation of structurecompletewith all lift, dewatering, shoring and shuttering etc. including refilling of trenches in 250 mm layers, ramming, watering and disposal of surplus earth with all lifts and lead upto 1000 meters exclusive of compensation of earth as per MoRTH specification Clause 301 to 305 In hard soil mixed with kankar,boulders etc. upto 20% Depth upto 3 metre |
| 40 | Providing and laying mechanically mixed and vibrated Cement Concrete in foundation upto a depth of 1.5 metres below ground level and 1.50 metres above Ground/Bed level as per MoRTH Specification : Clause 1000 & 1700P.C.C. 1:3:6 mix with crushed stone aggregate 20 mm nominal size. |
| 41 | ProvidingandlayingPlaincement concrete mix with stone aggregate 20 mm nominal size mechnicallymixedandvibrated in foundationup toadepthof1.50 metresbelow ground leveland/or1.50 metres aboveground/bed level as per MoRTH specification : clause 1000 & 1700. with all lead. P.C.C. grade M-15 in foundation & plinth upto 1.5 mtr. from ground level |
| 42 | Providing and laying Cement concrete for plain/reinforced concrete in open foundation as per drawing and technical specification as per MoRTH Specification : Section 1500, 1700 & 2100 including form work at any level P.C.C. grade M20 |
| 43 | Providing & fabricating steel reinforecemnt for RCC work including cutting, bending, placing in position and binding complete including cost of binding wire as per MoRTH Specification : Section 1000 & 1600TMT Steel reinforcement |
| 44 | Providing and fabricating steel reinforcement at any level including cutting, binding, placing in position and binding complete in foundation as per drawing and technical specification as per MoRTH Specification : Section: 1600TMT Steel reinforcement |
| 45 | Providing Cement plaster 20mm thick in cement mortar 1:3 at all levels as per MoRTH Specfication: Clause:1000 & 1300 |
| 46 | ProvidingandlayingPlaincement concrete mix with stone aggregate 20 mm nominal size mechnicallymixedandvibrated in foundationup toadepthof1.50 metresbelow ground leveland/or1.50 metres aboveground/bed level as per MoRTH specification : clause 1000 & 1700. with all leadR.C.C. grade M-20 in bed platesupto ground level excluding cost of steel reinforcement but including the cost of centering & shuttering |
| 47 | Reinforced cement concrete wearing coat M-30 grade at any level including formwork and reinforcement complete as per drawing and technical Specification. [MoRTH Specification : Clause 2204, 1500 & 1700]. |
| 48 | Providing and laying Cement concrete for plain/reinforced concrete in open foundation as per drawing and technical specification as per MoRTH Specification : Section 1500, 1700 & 2100 including form work at any level. P.C.C. grade M15 |
| 49 | Providing, laying & fixing in position RCC spun or hume pipes ISI marked with proper jointing in required slope packed in the gasket of hume or spun yarn and neatly finished with rich grout of cement moratar 1:3 or having flexible rubber ring joint made with prefectly air and water tight including testing of joints as per MoRTH Specfication : Clause : 1000 & 2900 NP - 3,1000 mm dia |
| 50 | Providing and laying Precast reinforced cement concrete Box culvert section of M-40 grade designed for \"AA\" class loading as per IRC specifications including the effect of impact, EQ etc. complete on firm base of 200mm thick lean concrete of M-10 grade with aggregate of size 40mm nominal of following internal sizes. The work includes required safety measures, construction of drain for diversion of flowing water, cost of design of RCC Precast Box and its proof checking from IIT/MNIT Jaipur etc. complete in all respect as per specifications Size 2.0 M x 2.0 M |
| 51 | Providing A.C pipe Weep holes 150mm dia in Masonry/Plain Concrete/.Reinforced Concrete abutment, wing wall/return wall complete as per drawing and technical specfication as per MoRTH Specification Clause 2205 |
| 52 | Providing and filling in foundation trenches and at the back of abutments, wing walls etc. and below pipe bed in layers not exceeding 150mm thick including watering and compacting, including all lead and lifts. Good local sand free from earth as per MoRTH Specification : Section 2100 |
| 53 | Providing and laying Expansion Joint complete as per drawing and technical specificationWith 20mm thick Galvanized mild steel plate as per MoRTH Specification : Section 2100, 2600 |
| 54 | Providing and laying Expansion Joint complete as per drawing and technical specification Providing & Fixing in position 20mm thick pre-moulded joint filler in expansion joint complete |
| 55 | Providing fixing and erecting 50mm dia steel pipe railing in 3 rows duly painted on medium weight steel channels (ISMC Series) 100mm x 50mm,1.2m high above ground, 2m centre-to -centre, complete as per approved drawings MoRTH clause 2703 |
| 56 | Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered or concrete surface as per MoRTH specification clause 803 |
| 57 | Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered or concrete surface as per MoRTH specification clause 803 |
