Improvement In Operation Of Various Tubewell By Replacement Of Electrical Equipment At Various Tubewell Under Bijwasan, Bharthal Ward Under Bijwasan Ac., Delhi-Delhi

Improvement In Operation Of Various Tubewell By Replacement Of Electrical Equipment At Various Tubewell Under Bijwasan, Bharthal Ward Under Bijwasan Ac.-Tubewells Name: 1. 1. Bijwasan Chuttan Nagri, 2. Bijwasan Village Kabristan, 3. Bijwasan Near Old Food and Supply office (Khara Kuaa), 4. Bijwasan Golok Dham near Khajan Master House, 5. Bijwasan Ambedkar Colony near Shiv Mandir (Halwai Wala), 6. Bijwasan Saini Mohalla (IOC Gate Back Side), 7. Bijwasan Village Shamshan Ghat to Main Road, 8. Bharthal Village Valmiki Chopal, 9. Bijwasan near Bikaner Malai, 10. Bijwasan Holi Chowk Johr Room Wala, 11. Bijwasan T/well at Naresh Wala Balmiki Basti, 12. Bijwasan T/Well at Satish House, 13. Bijwasan T/Well at Jat Chopal, 14. Bharthal T/Well near dada Mota Mandir, 15. Bijwasan Dispensary near Railway Line, 16. Bijwasan T/Well near Taxi Stand Palam Vihar A) OUT DOOR TYPE 7.5 TO 10HP Hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mm fabricated with 16 SWG M.S. sheet with horizontal and vertical intermediate chamber of suitable size on suitable size insulating board to make the Panel Robust, having double door with 14 SWG S.S hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, Vermin proof having following items. 1. MCCB 63 Amp, 4 Pole-1 No 2.RCCB/ELCB 63 Amp, 4 Pole with earth fault indicator and positive contact indication protecting a circuit automatically 1No 3.Fully automatic star delta starter of 10HP, 3Phase oil immersed type 1No 4.Digital Ampere meter 96mmx96mm square shape of 0-30 Amp range 1No 5.Digital Voltmeter of 96mm x 96 mm square shape of 0-500 Volt range with selector switch 1No 6.LED Indicating lamps with fitting (a set of 3 lamps) 1Set 7.Shunt capacitor of 5 KVAR with three phase isolator 1No 8.Motor Protection Assembly having Earth Leakage protection, Phase sequence corrector, Single phasing protection, Over load protection, High voltage-low voltage protection. 1No 9.Programmable time switch (i.e. RYB Phase & facility to change over from automatic to manual & vice versa) up to 10 H.P.1No 10.Complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc as required. The panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame.Make:-All the insert used in Panel must be of DJB approved makes and should be ISI marked where make of that equipment is not approved. 2 Providing and fixing MCB 63 Amp. TPN Make:- L&T/ Siemens/ Havells/ Indocop/MDS/ Cutler Hammer/ C&S/ DJB approved 3 Providing and fixing Main Switch 63 Amp. Make:-DJB approved 4 Supplyand installation of motor protection automation assembly having phase sequence corrector, single phase protection, programmable time switch, time delay power on high voltage/low voltage earth leakage protection, overload protection etc. upto 15hp, Make : Gain Guard/ Skope 5 Providing and fixing Fully automatic star delta oil immersed type starter, starter rating suitability with respect to pump: 15 hp Bentex/Crompton/Protx 6 Providing and fixing Volt Meter -DJB approved 7 Providing and fixing Amper Meter-DJB approved 8 Installation testing and commissioning of all above components

INR 500 /-

INR 14000.0 /-

INR 6.97 Lakhs /-