Improvement In The Operation Of Various Tubewells By Replacement Of Electrical Equipment At Various Tubewells Under Matiyala Ac., Delhi-Delhi

Improvement In The Operation Of Various Tubewells By Replacement Of Electrical Equipment At Various Tubewells Under Matiyala Ac.- 1 Name of tubewells :- 1. Kakrola t/w no. 2 2. Chawla t/w no. 10 3. Chawla t/w no. 11 4. Kanganheri t/w no. 5 5. Rewla khanpur t/w no. 1 6. Nanakheri t/w 7. Shikarpur t/w no. 5 8. Ghumanhera t/w no. 3 9. Pandwala kalan t/w no. 1 10. Pandwala kalan t/w no. 2 11. Kharkhari jatmal t/w 12. Khera dabar t/w no. 1 13. Khera dabar t/w no. 3 14. Rawta t/w no. 2 15. Galibpur t/w 16. Rewla khanpur t/w no. 2 17. Pandwala khurd t/w 18. Khera dabar t/w nr ayurvedic hospital Supplyof 63 Amp TP MCCB 415V AC Make:- DJB approved 2 Supply ofPower contactor 2 pole 25 AmpMake:- DJB approved 3 Supply ofPower Contactor 3 Pole 25 AmpMake:- DJB approved 4 Supply ofADD on Block 1 NO+ 1NCMake:- DJB approved 5 Supply ofStar Delta Delay TimerMake:- DJB approved 6 Supply of6 AMP SP MCBMake:- DJB approved 7 Supply of24 HourDigital TimersMake:- DJB approved 8 Supply ofMotor protections relay MPR 200Make:- DJB approved 9 Supply of5 KVAR Power CapacitorMake:- DJB approved 10 Supply of16 Amp TP MCBMake:- DJB approved 11 Supply of Overload relay Make:- DJB approved 12 Supply of3ph LED Ammeter Make:- DJB approved 13 Supply of3ph LED Voltmeter Make:- DJB approved 14 A) OUT DOOR TYPE 7.5 TO 10HP Hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mm fabricated with 16 SWG M.S. sheet with horizontal and vertical intermediate chamber of suitable size on suitable size insulating board to make the Panel Robust, having double door with 14 SWG S.S hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, Vermin proof having following items. 1. MCCB 63 Amp, 4 Pole-1 No 2.RCCB/ELCB 63 Amp, 4 Pole with earth fault indicator and positive contact indication protecting a circuit automatically 1No 3.Fully automatic star delta starter of 10HP, 3Phase oil immersed type 1No 4.Digital Ampere meter 96mmx96mm square shape of 0-30 Amp range 1No 5.Digital Voltmeter of 96mm x 96 mm square shape of 0-500 Volt range with selector switch 1No 6.LED Indicating lamps with fitting (a set of 3 lamps) 1Set 7.Shunt capacitor of 5 KVAR with three phase isolator 1No 8.Motor Protection Assembly having Earth Leakage protection, Phase sequence corrector, Single phasing protection, Over load protection, High voltage-low voltage protection. 1No 9.Programmable time switch (i.e. RYB Phase & facility to change over from automatic to manual & vice versa) up to 10 H.P.1No 10.Complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc as required. The panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame.Make:-All the insert used in Panel must be of DJB approved makes and should be ISI marked where make of that equipment is not approved. 15 Changing of defective spares in LT Panel and damaged wiring, making complete wiring of LT Panel and fitting of above spares inLT Panel at site. 16 Testing and commissioning of LT Panel after making all connections at site at ON load with proper testing equipment’s with engineer-in-charge.

INR 500 /-

INR 13900.0 /-

INR 6.90 Lakhs /-