Tender For Road Safety And Other Miscellaneous Works On All Categories Of Roads Falling Under The Jurisdiction Of Assistant Engineer Ist - Providing And Laying Of Hot Applied Thermoplastic Compound 2.5 Mm Thick Including Reflectorising Glass Beads @ 250 G, saharanpur-Uttar Pradesh

Tender For Road Safety And Other Miscellaneous Works On All Categories Of Roads Falling Under The Jurisdiction Of Assistant Engineer Ist - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 .The finished surface to be level, uniform and free from streaks and holes. Rates are inclusive of all taxes, royalty,etc. all T&P/machine material and labour required for proper completion of work.S.I. No. Ch.-27,S.No.-7 New Item 2 Road Delineator Providing and fixing of standard metal delineator as per IRC-79-2019 consisting of minimum retro frflective unit exposed area of 330 sqare cm in while color, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 2012 and meeting the coelficlent of retro reflection values as per ASTM D 4956 Type XI table specification. The delineator shall be painted with powder coat of minimum 40 microns thickness. on top of which retro reflective sheeting shall be pasted on both side. The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground, width not less than 100mm and shall extend not more than 300mm below the ground while being installed the front and back faces of the delineator should be corved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20 degree and 30 degree to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have grooves across the length to make the reflective sheers vandal-proof). The retro reflective sheeting shall be tested for 3 year outdoor weathering lest in Indian conditions as per IRC 67:2012 & proof of the same in form of government report shall be uploaded which quoting tender. If somehow tender pre qualification conditions do not ask for government report then the report shall be submitted to engineer-incharge before finallization of bill. The delineator is meant for application on gaps in median, traffic islands, dangerous bends, roundabouts, narrow bridge etc or as desired by site engineer. 3 Reflective Raised Pavement Marker Providing and fixing of raised pavement markers (Cat Eye) Type x-ASTMD-4956-04 Avery Dennision/3m(USA Make) having moulded body of polycarbonate, ASA, HIPS or ABS able to support a load of 13.635 M.T. tested in accordance with ASTMD 4280 type H and other requirement mentioned in MoRT&H Circular, its reflective lens made of micro prismatic lens (capable of providing total internal reflection of light), electronically welded to the body. The length, height and width of the body shall not exceed 130 mm, 20 mm and 105 mm respectively, The area of each reflective surface shall not be less than 13 Sq. cm . on each side sloping at the angle of 35 + 5 degree to the base to ensure maximum reflectively. it shall comply to specification of Category A of MoRT&H circular no. RW/NH 33023/10/97-DO-III dated 11.06.97 lenses shall be moulded of methyl methecrylate conforming to ASTMD 788 or equivalent.With 7 years warranty. Rate shall be inclusive of all taxes, royalty, etc. All T&P/ machine material and labour required for proper completion of work. S.I. No. Ch.-27,S.No.-10 New Item 4 Retro-reflectorised Traffic sign as per IRC 67-2012Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67:2012 made of high intensity grade sheeting vide clause 801.3, fried over aluminum sheeting type-IV 1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm below ground level as per approved drawing. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. S.I. No. Ch.-27,S.No.-6(i) 155 x 60 cm Double chevron 5 Providing and applying tack coat with bitumen V.G-10 pressure distributor at the rate of 0.25kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. 6 Providing and laying bituminous cocnrete with 100-120 TPH HMP producing and average output of 75 Tonne per hour using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5.4 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver fixisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specificiation clause No. 509 complete in all respects. 7 Scraping old painted surface including disposal of all scraped material to a distance of 30 meters (100 ft.) as directed by Engineer-in-charge. S.I. No. 772 8 Sand filling in under speed table including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for the proper completion of the work Saplings of girth upto 30 cms. measured at a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared, including cost of sand. SI. 255(a) 9 Supplyof 100mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete with Fly Ash paver blocks, smooth high gloss finish, skid resistant; manufactured through vibro-compression mechanism. high pressureand control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 50 MPa and weight 5.0 kg per No. confirming to IS: 15658-2006 including cost of material, labour, T & P etc. (Ch-20 new item 15)

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	28-06-2025	Date	Date	03-07-2025

INR 766 /-

INR 102000.0 /-

INR 10.20 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB