Repair/Maintenance and replacement of unserviceable parts of submersible and centrifugal pump set, Development of Bore well, Electric control panel, submersible cable security light, sign board and allied works of UB area under GE (East) Bareilly; 1 Lifting/taking out defective submersible pump and motor of any capacity alongwith column pipe of any size and submersible cable , dismantling the pump from motor, setting aside for repair /servicing / overhauling including lowering the pump set into borewellincl replacement of packing and nut bolts ( if required) and testingafter the completion of repair works in the presence of GE/ Engr in charge . 2 Rewinding to submersible pump 50HP of any makewith super enameled copper winding wire PVC coated 2 mm thick as per taken out qty , Providing PVC separators , PVC sleeves & jointing compound, varnishing etc required and all other materila reqd for rewinding complete all as specified and directed. Note :-.If the same motor copper winding wiring burnt second timeduring theCA Period,No extra cost will be paid to contractorfor rewinding the motor. 3 All as per item no 2.00 above but capacity 40 Hp 4 All as per item no 2.00 above but capacity 15/20Hp 5 All as per item no 2.00 above but capacity 1.5/2Hp 6 All as per item no 2.00 above but capacity 5/7.5Hp 7 Repair/Replacement of following parts of the submersible pump and motor for capacity 40/41/50 HP of original company as approved by Accepting officer. 8 As per item No 3.00 Thrust bearing plate made out of carbon for submersible motor 9 As per item No 3.00Gun metal bush for submersible motor 10 As per item No 3.00Shaft sleeve made out of stainless steel for submersible motor 11 As per item No 3.00 Clamp stud for submersible motor 12 As per item No 3.00Rotor balancing of submersible motor 13 As per item No 3.00Shaft grinding of submersible motor 14 As per item No 3.00GM Neck Ringfor submersible pump 15 As per item No 3.00Stainless steel sleeve for submersible pump 16 As per item No 3.00Stainless steel pump shaft for submersible pump 17 As per item No 3.00Stainless steel impellerfor submersible pump 18 As per item No 3.00Cast ironbowl for submersible pump 19 As per item No 3.00Rubber bush for submersible pump 20 S&F in repair electric shock treatment chart coloured of size approximetely 3 ft x 2 ft & 6 mm thick plywood withwood frame including covered with plastic laminated sheet complete all as specified and directed. 21 S&F in repair machinary maintenance chart coloured of size approximately 3 ft x 2 ft & 6 mm thick plywood withwood frame including covered with plastic laminated sheet complete all as specified and directed. 22 M&L for trimming vegetation or small inequalities clearingall grass vegetation, saplings, shrubs, brushwood,roots, and tree of surroundings area up to 500 sq mtr including cleaning and removing rubbish upto a distance of 50mtr outside the periphery of the area under clearance of water supply installations complete all as specified and as directed. 23 S&F in repair for Aviation light on OH tank 18/21 mtrs staging (on top of OH tank) with all fittings,fixtures,and accessories including 2.5 sqmm wire Three core in 20 mm PVC conduit from light to connection points ,including 2-way MCB DB with isolator (10 Amp )capacity complete all as specified and directed. 24 Supplying ,Laying, jointing and testing 2.5 Sq mm 2 core,PVC insulated, armoured, heavy duty, Copper conductor cable1100 volts grade ,laid in trenches/ducts, floors, fixed to pole/ walls etc. complete all as specified and directed by the Engineer-in-charge. 25 Supply &fix inrepair 1100 volts grade heavy duty cable PVC insulated aluminum conductor screenedserved with inner sheathing of PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm GI suspension wire , one twin core cables flat or circular of size 10 Sqmm.etc complete all as specified and directed . 26 S&F in repair Off load change over switch 200 Amp 4pole 415 Volt, with enclosure and side handle etc complete all as specified and directed 27 Supply and fix 35 W new generation, IP 65 LED post-top family, energy saving, environmental friendly, long life aestheticallydesigned with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. clear cover offers bright illumination for different applications. 28 S & F in replacement of street light brackets 40 mm bore GI pipe medicum grade upto 1.5 mtr long bend to shape including flat iron clamps and sutable nuts and bolts .etc complete all as specified and directed 29 Material and labour for replacement of PVC insulatedsingle core multistranded copper cable of size 1.5 sq mm unsheathed 1100 volts gradedrawn through conduit /casing caping on surface / pole /wall concealed and making good of disturbed surface including taking down unserviceable wire etc complete all as specified and directed 30 M&L earthing complete with GI earth plate electrode of size 60cm x 60cm x 6.0mm thick burried directely in ground vertically to a depth not less than 2.25m below normal ground level with top edge of earth plate at a depth not less than 1.5m below normal ground level connected to and including earth lead of GI strip 32 x 6 mm by means of bolts, nuts and check nuts and washers etc made of GI and connected to Earthing test point and earth dolly all as shown in elect plate No3 SSR Pt-I including all necessary excavation earth work, PCC chamber, chamber cover with handle (PCC 1:2:4) including 40mm dia protection pipe and 20mm dia watering pipe and wire mesh funnel etc complete all as specified and as directed including earth work 31 Supply & replacement of ContactorML-3 ,suitable to operate 35-45 HP submersible pumping set Cat part No SS-90721 Make-L&T or equivalent to approved make as specifiedin CA. 32 Supply & replacement of ContactorML-4 ,suitable to operate 50-60 HP submersible pumping set Cat part No SS-90910 Make-L&Tor equivalent to approved make as specifiedin CA. 33 S&F in repairselectronic timer type ST 100 suitable for operation on 415 volts 50 Hz for 3-30 Sec all as specified and as directed. 34 S&F in repairselectronic Single phase preventeroperation on 415 volts 50 Hzall as specified and as directed. 35 S&F mini motor protection relay for 35-51hp submersibble motores of make L&T all as specified amd directed. 36 Supply and fix in repair spare conntact kit for ML 3 contractor complete all as specified and directed . 37 Supply and fix in repair spare conntact kit for ML 4 contractor complete all as specified and directed . 38 M&L MCCB , 4 pole, 415 Volt, fixed type 125 to 160 amp with breaking capacity 36 Ka complete all as specified and directed. 39 M&L MCCB , 4 pole, 415 Volt, fixed type 160 to 200 amp with breaking capacity 35 kA complete all as specified and directed. 40 S&F in replacementfully automatic star delta starterwith enclosuresuitable for 41 HPmotor Make : L&T or equivalent 41 S&F in replacementfully automatic star delta starterwith enclosuresuitable for 25 HPmotor Make : L&T or equivalent 42 S&F in replacementfully automatic star delta starterwith enclosuresuitable for 12.5 HPmotor Make : L&T or equivalent 43 Supply onlyCalcium based granularhypo chlorite 65% to 70% disinfectant for water treatment ,Packing in 45 KG ,plastic drums complete all as specified and directed . 44 Supply & installation in replacement electrically operatedincluding High pressure Single head Gear motored adjusable Dosing Pump set, Modle:-96 NGQ51, Item NR:- DPP965, uneffected on dry running having no loss of prime, independent of back pressure and able to handle both chemical solution as well as suspension, 230volts, 50 cycles, AC,44 RPM 1/30 fraction HP having output 2US GPD to 40 U.S GPD complete with accessories i.e lead tubing , connecting nuts, injection check valve, clay weight and ferrules including complete all as specified and directed by Engr-in-charge. Make :-Dosing pump :- Declibac Modle :-96 NGQ51, Item NR:- DPP9651 or Equivalent in poter & Watt Crop/Briozing Unlimited. 45 M&L for dismantling of motor, 3 phase, 7.5/10 KW, taking out burnt winding wire from stator, cleaning all slots properly, repair of pump and rewinding the motor with proper guage of super enamelled winding wire and varnishing properly including baking and providing insulation and packing properly re-assembling the motor with pump and installed at its proper position and testing the same including connection plateetc complete as specified and directed. 46 M&L for dismantlingcentrifugal/monoblock pump set of capacity 7.5/10 KWand taking out unsv spares and and replacement of bearing,bush, packingimpeller, fan balde , necesary lath workas per existing make and modal complete all as specified and directed 47 Take the water sample from the bore well at ph no. 12,,24,25,27,28,29,30,31,32,33,34,36,37,38,41, MH PH , LJA PH and two consumer end and send it for physical/Chemical/Bateriological test from any recognised govt agency (qtrly two times in contract period) and provide its report to Engr in charge. 48 S& F in replacement submersible pump / motor electric driven 415 Volts , TP suitable for 200/250 mmbore well casing pipe size 200/250 mm supply complete of 40 HP, Discharge 2700 LPM Head 60 Mtr , Dia 200 MM all as specified and directed.Note:- Old unsv will be deposited in MES store Make :Kirloskar/CRI/Crompton 49 S& F in replacement submersible pump / motor electric driven 415 Volts , TP suitable for 200/250 mmbore well casing pipe size 200/250 mm supply complete of 25 HP, 6/7 stage Discharge 1500 LPM Head 60 Mtr , Dia 200 MM all as specified and directed.Note:- Old unsv will be deposited in MES store Make :Kirloskar/CRI/Crompton 50 S& F in replacement Pressure Booster Pump/ motor electric driven 230 Volts , SP suitable for 20/25 mmbore with staster complete of 01 HP all as specified and directed Note:- Old unsv will be deposited in MES store 51 S& F in replacement HI Flow 1 HP Centrifugal pump / motor electric driven 230 Volts , SP suitable for 20/25 mmbore with staster complete all as specified and directed.Note:- Old unsv will be deposited in MES store 52 Supply fixing testing and commissioning submersible cable flat 16 sqmm 3 core PVC insulated and PVC sheathed with multi stranded copper conductor 1100 volts grade fixed to submersible motor column pipe using suitable size of clamps made out of stainless steel flat of size 20x2 mm with steel nuts bolts & washer foe every column pipe of 3 mtr lenght all as specified and directed. 53 M & L Wiring for circuit/submain wiring alongwith earth wire with 6 Sqmm copperwire , sizes of FR is PVC insulatedcopper conductor, single core, multistrandedcable 6 runsin surface/recessed as required 54 S&F in replacement MS ERW Column pipe screwd 150mm nominal bore having wall thickness not les than 7.11 mm electric resistance weldided with MS Flanged 16 mm thick heavy duty confirming to IS-6392 incl 2 mm thick rubber sheet, steel nut and bolts with washer each 3meter lengthcomplete all as specifed 55 S&F in replacement MS ERW Column pipe screwd 200mm nominal bore having wall thickness not les than 7.11 mm electric resistance weldided with MS Flanged 16 mm thick heavy duty confirming to IS-6392 incl 2 mm thick rubber sheet, steel nut and bolts with washer each 3meter lengthcomplete all as specifed 56 S&F in replacement MS ERW Column pipe screwd 100mm nominal bore having wall thickness not les than 7.11 mm electric resistance weldided with MS Flanged 16 mm thick heavy duty confirming to IS-6392 incl 2 mm thick rubber sheet, steel nut and bolts with washer each 3meter lengthcomplete all as specifed 57 Supply fixing testing and commissioning submersible cable flat 2.5 sqmm 3 core PVC insulated and PVC sheathed with multi stranded copper conductor 1100 volts grade fixed to submersible motor column pipe using suitable size of clamps made out of stainless steel flat of size 20x2 mm with steel nuts bolts & washer for every column pipe of 3 mtr lenght all as specified and directed. 58 Supply and laying steel water tubing mediumgrade of following bore fixed with wall/laid in floor with and including all GI fittings as required at site complete all as specified and directed. 59 As per Item No 42.00 (a)50 mm bore 60 As per Item No 42.00 (b)25 mm bore 61 As per Item No 42.00 (c)20 mm bore 62 S&F gun metaliron gate valve with iron wheel head, screwed both ends for iron pipe, ISI marked,complete all as specified of the following sizes including dismantling the old unserviceable existing valve complete :- 63 As per Item No 43.00 (a)50 mm bore 64 As per Item No 43.00(b)25 mm bore 65 As per Item No 43.00(c)20 mm bore 66 S&F ofD Jointof following bore complete all as specified and directed. 67 As per Item No 44.00 (a)80 mm bore 68 As per Item No 44.00 (b)100 mm bore 69 As per Item No 44.00(c)150 mm bore 70 As per Item No 44.00 (d)200 mm bore 71 M&L for dewatering complete trenches manually for repairing joints by cocking and inserting spurn yarn and Run lead joint, making good/ leakless the existing joint including necessary excavation and earth work like returning, filling etc for pipes of following bore complete all as directed. 72 As per Item No 45.00 (a) 80 mm bore 73 As per Item No 45.00 (b) 100 mm bore 74 As per Item No 45.00 (c) 150 mm bore 75 As per Item No 45.00 (d)200 mm bore 76 Supply and fixing DI fittings for Socket pipe, DI Bends, connecting pieces,bell mouth pieces, tapers, tee pieces of one end flanged and other end spigot or socket upto 150 mm bore complete all as specified and directed. 77 S&F of Non Return Valve of following sizes at various pump houses complete as specified and directed. 78 As per Item No 47.00 (a) 150 mm bore 79 As per Item No 47.00 (b) 200 mm bore 80 As per Item No 47.00 (c) 100 mm bore 81 S&F in replacement of Bib tap ofPVC15 mm bore complete 82 S&F in repair sluice valve class PN-1.6 heavy duty flanged ends drilled ISI marked confirming to IS: 14846, wheel operated (Handle) with high tensile stainless steel spindle, including nuts, bolts and jointing with jointing materials etc. complete including taking out old existing unservicable sluice valve including making arrangement for safe working all as specified and directed.for the following sizes:-Make: BIR, KIRLOSKAR ,Kartar or Equivalent as approved by GE. 83 As per Item No 49.00 (a) 150 mm dia 84 As per Item No 49.00 (b) 100 mm dia 85 As per Item No 49.00 (c) 80 mm dia 86 As per Item No 49.00 (d) 200 mm dia 87 Dismantling and taking outsluice valve any size and ,M&L for repair sluice valve for 80 mm to 200 mm bore , high tensile stainless steel spindle, including nuts, bolts and gas kit ,glands and refixing after repair etc. complete all as specified and directed. 88 M & L for construction of brick masonry valve pit of size 1.2x1.2x 90cm(internal dimension) one brick thick wall built in CM (1:4) on 100mm thick PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in foundation, and 15mm thick rendering in cement mortar (1:4)both externally andinternally, external plaster shall be up to 15cm below GL, providing valve pit cover made of 3.15mm thick MS sheet/plate, including provision of hinges, handle and locking arrangement including40 X 40 X 5mm angle iron frame fixed on top of valve pit by means of MS hold fast 40x5mm and 150mm long, embedded in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) including two coats of anti-corrosive paint over a coat of red oxide zincChrome primer and necessary earth work in soft/loose soil including demolition of old unserviceable existing valve pit & pit cover complete all as specified & directed. 89 Taking up cast iron/ PVC /HDPEwater mains of following bore of pipes (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead.100 mm 150 mm bore 90 Supply and laying of 150 mm bore centrifugally cast (Spun) ductile iron pressure pipe with spigot & socket end, class K-9 in any length laid in trenches, conforming to IS-8329/2000 with cement mortar lining with and including rubber gasket jointing conforming to IS-15382/tyton joint complete with all fittings e.g Tee, Bends etc all as specified and directed. 91 All as per item No 53 but for 100 mm bore complete all as specified and directed. 92 M&L for run leadjoint Spigot and socketed pipes and fittings,for the following size of pipe completeall as specified For100 mm bore 93 As per Item No 55.00 (a) 80mm bore 94 As per Item No 55.00 (b) 100mm bore 95 As per Item No 55.00 (c) 150 mm bore 96 M&Ldevelopment of borewell by flushing of borewell complete by using 250CMF compressor and heavy duty driller machine to deliverthe high air pressure at the bottom of the bore well and cleaing/flushing the bore well till the water is become free from any mud and clearcomplete as per site requirement and all as specified and directed by Engineer-in-charge 97 Disconnecting, taking out and removing old existing unserviceable underground, LT cable of any description and in any position complete including taking downprotection pipe,PCC Cover/Bricks etc all as specified and directed by the Engineer-in-Charge for the any sizes 98 Supply, laying, jointing and testing XLPE/ P.V.C insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade of any description and any make laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed by the Engineer-in-charge for the following sizes :-Make:-HAVELLS Ref No-(A2XWY/A2XFY) ,ICL,CCI,Fort GloSter Etc.(a)95 Sqmm 3.5 core 99 Excavation in trenches in soft & loose soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope/gradient forlaying cables/pipes etc.all as specified and directed by Engineer-in-Charge including removing cable protection PCC covers/ bricks & stacking serviceable covers / bricks for reuse and disposal of unserviceable covers within 50 m all as specified and directed.Note : Excavation shall be made carefully in order to avoid damage of existing cables and protection covers. 100 Returning, filling in including spreading, leveling, watering and well ramming in layers of25 cm thickafter the cables etc. are laid, jointed & tested complete all as specified and directed 101 Removal of surplus excavated soilexc. 50 mtr butn. exc. 250 mtr distance and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 M above the starting point etc complete all as directed. 102 Material and labour for river washed and screened, dry sand for cushioning of cable in trenches for cable protection including spreading, leveling and hand punning complete all as specified in SSR Part-I and as directed.Note Only Punned thickness of sand will be measured 103 Supplying & Laying Sub Class `B’ bricks old size with axis of the bricks perpendicular to the axis of the cable as in cable protection all as specified and directed 104 Supply and fixing all in one solar LED street light IP66 with high efficiency mono crystaline solar panel PV module not less than 12V, 20W lithium ferro phosphate battery with in-built BMS technology, capacity 12.8V, 10.5 Ah high efficiency LED 100LM/W, MPPT solar charge controller and aluminium extruded body & is specially programmed to automatically control the dimming and brightness of light, which increase the backup time and minimum 10 Hrs backup. 105 Supply,installation,Commissioning and testing of Smart Motor Protection (electronic smart relay for metering and protection with VFD) controller having feature as Protection against UV,OV, Phase loss, Phase unbalanced,Phase asymetery & auto phase polarity correction with time delay & having display of V, I, Of, Hz with iOT enabled and potential free feedback contacts suitable for 40 hp motor-3 phase induction motor with following details.(make-Rockwell/Siemens/Schnder)(i) E300 overload relay (193/592 IEC/Nema) group selection (ii) 2 IN / 2 Out control Module. 240V AC (iii) V/I/GF Sensing Module (.5-30A) DIN rail/ Panel Mount Power Terminals. (iv) Voltage/current/ Ground fault sensing module (1C…100A) DIN Rail/ Panel Mount with line and Load side power conductor Terminals. (v) Voltage/ Current/ Ground fault sensing module (20..200A) DIn Rail/ panel Mount with line and load side Power conductor Terminals 106 Supply only Alum Ferric(Grade-4) (best quality as per sample) for purification of water (containing lead (as PB) 30 ppm Max and arsenic 6 ppm Max) confirming to IS-299/2012 (Revised) as amended upto date complete all as specified and ddirected by Engineer-in-Charge.(Note :- The Alumino Ferric Sulphate shall be supplied in superior quality bricks (slabs) as per IS specifications.Manufacturers Name/trade mark shall be engraved on each brick (slab) in addition to marking of relavant clause ofIS specification). 107 Dismantling and Taking Out old U/S LT Busbar chamber and Supply, installation, Commissioning and testing LT Busbar chamber,size of 900x900x600 mm for 3 phase, 6 wire, 415 Volts ,AC , 50 Hz supply, Outdoor cubical type, dust and vermin proof, pedestal mounting type suitable for Outdoor applications having suitable shape/ size canopy on top, made out of 3.15 mm thick MS sheet with using 25mm x 25mm x 5mm angle iron frame and supports, duly finished with powder coated using two coats of synthetic enamel paint of approved colour over a coat of red oxide primer all over steel surfaces mounting of angle iron of size 50 x 50 x 6mmcomplete with separate compartment of suitable shape and size with shutter and locking arrangement and including PCC work for fixing panel legsand bus barCopper 4 Nos conductor suitable shape and size , of 200 amps rating including MCCB 200Amps as Incomer and outgoingtaking out end connectinons of the existing cablesand fixing the cable with the panelusing new lugs and glands of suitable size.
