Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 22-07-2025 | AMDTS_TO_TENDERPAGES2 | Other | 29-07-2025 |
| 2 | 18-07-2025 | REVISED_DRAWINGS | Other | 29-07-2025 |
| 3 | 18-07-2025 | REVISED_PREPRICED_SCHEDULE | Other | 29-07-2025 |
| 4 | 18-07-2025 | AMDTS_TO_TENDERDOCUMENTS | Other | 29-07-2025 |
| 5 | 18-07-2025 | REVISEDBOQ | BOQ | 29-07-2025 |
| Sl. No. | Item Description |
| 1 | SCHEDULE ‘A’ PART-I(BUILDING & STRUCTURE WORKS)Details of prepriced schedule is given in tender documents. |
| 2 | SCHEDULE \"A\" PART-II ( EXCAVATION, EARTHWORK, SITE CLEARANCE& SITE DEVELOPMENT ) Details of prepriced Schedule is given in tender documents. |
| 3 | SCHEDULE \"A\" PART-III (INTERNAL WATER SUPPLY)Details of prepriced Schedule is given in tender documents. |
| 4 | SCHEDULE \"A\" PART-IV (INTERNAL ELECTRIC SUPPLY) Details of prepriced Schedule is given in tender documents. |
| 5 | SCHEDULE \"A\" PART-V (EXTERNAL WATER SUPPLY )Details of prepriced Schedule is given in tender documents. |
| 6 | SCHEDULE \"A\" PART-VI (EXTERNAL ELECTRIC SUPPLY)Details of prepriced Schedule is given in tender documents. |
| 7 | SCHEDULE \"A\" PART-VII (LIGHTNING PROTECTION)Details of prepriced Schedule is given in tender documents. |
| 8 | SCHEDULE \"A\" PART-VIII (REFRIGERATION AND AIR CONDITIONING)Details of prepriced Schedule is given in tender documents. |
| 9 | SCHEDULE \"A\" PART-IX (FIRE FIGHTING SYSTEM)Details of prepriced Schedule is given in tender documents. |
| 10 | SCHEDULE \"A\" PART-X (AREA DRAINAGE / CABLE DUCT)Details of prepriced Schedule is given in tender documents. |
| 11 | SCHEDULE \"A\" PART-XI (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents. |
| 12 | SCHEDULE \"A\" PART-XII (ROAD/ PATH/CULVERT)Details of prepriced Schedule is given in tender documents. |
| 13 | SCHEDULE \"A\" PART-XIII (SECURITY WALL, FENCING AND GATE)Details of prepriced Schedule is given in tender documents. |
| 14 | SCHEDULE \"A\" PART-XIV (LIFTS)Details of prepriced Schedule is given in tender documents. |
| 15 | SCHEDULE \"A\" PART-XV (EOT CRANE)Details of prepriced Schedule is given in tender documents. |
| 16 | SCHEDULE \"A\" PART-XVI (DG SET) Details of prepriced Schedule is given in tender documents. |
| 17 | SCHEDULE \"A\" PART-XVII (DISPERSAL AREA)Details of prepriced Schedule is given in tender documents. |
| 18 | SCHEDULE \"A\" PART -XVIII (MISCELLANIOUS B&R AND E&M ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as \"Rs 0.00\" under Col.\" E \" signifies this fact only. |
| 19 | INTERNAL WATER SUPPLY: S&F for 15 mm dia bore CP two way bib cock with CP wall flange (Make : Jaquar Model No. OPP15041PM / Equivalent inKohler), cast copper alloy, screwed down high pressure with crutch screwed both ends for CPVC pipes or for union and fixed complete all as specified and directed by Engr-in-charge. |
| 20 | S&F for 15 mm dia bore CP bib cock with CP wall flange (Make : Jaquar Model No. OPP15037PM / equivallent in Kohler), cast copper alloy, screwed down high pressure with crutch , screwed both ends for CPVC pipes or for union and fixed complete all as specified and directed by Engr-in-charge. |
| 21 | S&F for 20 mm bore concealed Stop cock reqular brass body with spindle extnwith Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-083CQT & ALD-089CQT)(Make : Jaquar Model No. ALD 089 CQT/ equivalent in Kohler), cast copper alloy, screwed down high pressure with crutch , screwed both ends for CPVC pipes or for union and fixed complete all as specified and directed by Engr-in-charge. |
| 22 | S&F for 25 mm bore concealed Stop cock reqular brass body with spindle extnwith Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-083CQT & ALD-089CQT)(Make : Jaquar Model No. ALD 089 CQT/ equivalent in Kohler), cast copper alloy, screwed down high pressure with crutch , screwed both ends for CPVC pipes or for union and fixed complete all as specified and directed by Engr-in-charge.(Note To be fixed from inside as controlling valve for each unit at respective floor) |
| 23 | S&F 32 mm dia bore concealed Stop cock reqular brass body with spindle extnwith Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-083CQT & ALD-089CQT)(Make : Jaquar Model No. ALD 089 CQT/ equivalent in Kohler), cast copper alloy, screwed down high pressure with crutch , screwed both ends for CPVC pipes or for union and fixed complete all as specified and directed by Engr-in-charge.(Note To be fixed from inside as controlling valve for each unit at respective floor) |
| 24 | S&F 40 mm dia bore concealed Stop cock reqular brass body with spindle extnwith Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-083CQT & ALD-089CQT)(Make : Jaquar Model No. ALD 089 CQT/ equivalent in Kohler), cast copper alloy, screwed down high pressure with crutch , screwed both ends for CPVC pipes or for union and fixed complete all as specified and directed by Engr-in-charge.(Note :To be fixed from inside as controlling valve for each unit at respective floor) |
| 25 | S&F 20mm bore CP angular stop cock with CP wall flange (Make : Jaquar Model No. CQT 23053 / equivalent in Kohler), cast copper alloy, screwed down, high pressure with crutch , screwed both ends forCPVC pipe or for union and fixed complete all as specified and directed by Engr-in-charge. |
| 26 | S&F for 100 mm overhead shower rose round shape single flow (ABS Body chrome plated with gray face plate (Make : Jaquar Model No. 1989 with SHA 479L300S / equivalent in Kohler)Shower Arm ø20mm & 300mm Long Round Shape with 90˚ Bend for Wall Mounted Showers with Stainless Steel connected to pipe complete all as specified and directed by Engr-in-charge. |
| 27 | S&F for 20 mm dia bore CP self closingtap (Push cock for Urinals) cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for CPVC pipes or for union and fixed complete all as specified and directed by Engr-in-charge. (Make : Jaquar / equivalent in Kohler) |
| 28 | S & F health faucet chromium plated with 8mm dia, one mt long flexible tube with wall hook of make Jaquar, Cat No. ALD-573 or equivalentin other approved make |
| 29 | S & F CP Bottle trap for WHB and Urinal having minimum water seal of 25mm(Make : Jaquar / equivalent in Kohler) |
| 30 | INTERNAL ELECTRIC SUPPLY: S & F LED mirror light fitting 12 watt, 220 Volt AC of size 580 mm in length, aluminium die cast housing, white body colour, IP-20 connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. (Make : Luker product name- LITA T6, Product code-LMR-13 or equivalent in Bajaj, Havells and Philips etc). |
| 31 | S & F LED light fitting10 Watt 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceiling rose complete. |
| 32 | S&F LED Bulp 10 Watts with Pendant ordinary, comprising ceiling rose, brass with insulated body lamp holder, cord grip pattern, and 0.5 sq.mm copper flexible twisted twin cord up to 1.5m length as ordered |
| 33 | Supply and fixing LED luminaire, Recess Mounted Light FittingMake Bajaj Model BPRF 20W WH SL LED 1x20W LED or Equivalent in Philips, Crompto, Luker, Havells, Surya |
| 34 | S & F in repair LED Bldg Security light fitting 25 Watt 230 V AC outdoor type IP-65, 5700 K with pressure die-cast housing, high performance polycarbonate optics and IP66 ingress protection. 4kV inbuilt surge protecton with Top opening driver cover for easy maintenance including GI bracket of suitable size bent to shape and fixed on wall with metal fastnersincl drilling of holesand connecting up with flexible copper cable all as specified and directed. (Make : Bajaj Cat No : ENXT P 25L WH PO PC SD or equivalent of any other approved make). |
| 35 | Supply and fix Engage light with Green & Red LED complete all as specified and as directed |
| 36 | S&F and connecting up complete as MCCB incomer VTPN DB 4 Way double door, 415 V, AC, 50 Hz with minimum IP-43, IK-09 protection conforming to IS-13032 & 8623, universal mounting with copper bus bar, neutral link, earth link, earthing studs, detachable gland plates etc all as specified and as directed ( Make : Legrand Cat No 507728 or equivalent in ABB/Schneider/ L&T). |
| 37 | S & F modular MCB DBOx 3 Pin Socket with MCB SP 20 Amp, 240 V including plastic enclosure as per manufacturer instruction fixed on wall surface complete all as specified and as directed. (Make:-Havells, Model-DHDMCSN0251016 or equivalent in any other approved make) |
| 38 | Supply, Installation, test and Commissioning, factoryfabricated wall mounted LT panel board, confirming toIEC 60349-1 & 2, LT Feeder Pillar Box made out of 2.00 mm thick CRCA Sheet multifold design, chemically treated surface with multi tank process powder coating,indoor modular type,dust free ,Vermin Proof , totally enclosed with Confirming to IP 43 for indoor panel & Confirming to IP 54 for indoor panel ,single door with Front side opening including Neoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers atSides. Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeddedwith 50X50X6mm Galvanised iron Angle Frame complete withinternal connection with suitable size of cable, cable lugs and cable glandsand Aluminium Busbar of 500 Amps and Testing after Installation includingcomplete all as specified and comprising of the following :–( Main panel for Hangers)(a)MCCB 250 A4 pole ,36 KA- 01 No (Main I/C)(b)MCCB 100 A4 pole ,15 KA- 4 Nos (c)LED indicating lamp set- 01 Set of three(d) Ammeter Class-1,digital pannal mounting type 96mmx96mm including CT& selector switch for each outgoing |
| 39 | M&L for TV socket TV socketmodulemetal flushed including flushed Box cover plate Box for 2 way module complete all as specified. |
| 40 | M&L for telephone jak with modulemetal flushed including flushed Box cover plate Box for 2 way module complete all as specified. |
| 41 | Supply and fix UPVC Maxi Trunking 100 x 50 mm, White |
| 42 | Supply and fix LED High Bay/Flood light 200 W IP 65 Make : Havells Cat Part No -SAUCERGENXADVHBP200WLED757PWBBORL or equivalent in any other approved make) |
| 43 | Supply & fix Air Circulator fans 230 voltssingle phase oscillating 600 mm sweepsuitable for wall mounting. |
| 44 | S & FVertical triple pole & neutral (VTPN), double door, 4-way metallic modular distribution board conforming to IEC 61439-3, suitable for flush / surface mounting with provision for FPMCCB as incomer and TPN/SP MCBs as outgoing, reversible metal door, 200 A copper busbar for each phase, fully insulated & shrouded neutral bar, earth bar, wiriest & cable ties for cable management, profited masking sheet, etc. having IK 09 & IP 43 protection complete all as specified and directed. |
| 45 | Supply, Installation, test and Commissioning, factoryfabricated LT panel board,Wall Mounted Type, CPRI /Authorised Govt. Agencies ,made out of 2.00 mm thick CRCA Sheet multifold design, chemically treated surface with multi tank process powder coating,indoor modular type,dust free ,Vermin Proof , totally enclosed with Confirming to IP 43 for indoor panel ,single door withboth side opening including Neoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeddedwithiron Angle Frame complete withinternal connection with suitable size of cable, cable lugs and cable glandsand Testing after Installation includingcomplete all as specified and comprising of the following :– ( wall mounting Hanger Panel)(a ) INDUSTRIAL WALL / Panel MOUNTED PLUG SOCKET SUITABLE FOR IP67 DEGREE OF PROTECTION 32 Amps 5 pin, 3 phase+neutral+earth ( for 415/420 V 3 phase)- 1 Nos(b ) INDUSTRIAL WALL / Panel MOUNTED PLUG SOCKET SUITABLE FOR IP67 DEGREE OF PROTECTION 32 Amps 3 pin, single phase+neutral+earth ( for 240 V 1 phase)- 1 Nos(c ) INDUSTRIAL WALL / Panel MOUNTED PLUG SOCKET SUITABLE FOR IP67 DEGREE OF PROTECTION 16 Amps 3 pin, single phase+neutral+earth ( for 240 V 1 phase)- 1 Nos |
| 46 | Supply and fixing of cable tray made out of galvanised perforated sheet in 14 gauge, 50mm height including accessories like coupler, wall brackets up/down elbows, bend, tees etc., and fixing with FRP saddles in equal distances on wall crossing and making good to the surfaces as per direction |
| 47 | EXTERNAL WATER SUPPLY:Supply and fix Foot Valve conforming to IS 4038, 100mm dia complete all as specified |
| 48 | Supply, installing, testing and commissioning of electrically driven horizontal Centrifugal Pump set as per specification, motor TEFC type, 2880 rpm, 415 V, 50 Hz, 3 phase, class \"F\" insulation, IP 55 protection,starting on suitable DOL starter. The pump shall be horizontal, end suction, top discharge. The pump shall have cast iron casing, cast iron/bronze impeller (as per manufacturer), carbon steel shaft with common base frame (fabricated mild steel channel frame or cast iron type) placed on RCC (1:2:4) including foundation, bolts, nuts etc. complete with antivibrator pad as required capable of discharging not less than 250 LPM at 40 mtr head inclusive ofPVC insulated copper cable connection from starter to the motor terminals all as specified and directed by the Engineer-in-charge.(01 No. Working + 01 No Stand By)Make:- Kirloskar Brothers/Crompton /Havells/CRI |
| 49 | Supply, Installation, test and Commissioning CPRI APPROVED factoryfabricated, indoor type, LT panel board,made out of 2 mm thick CRCA Sheetsingle door withboth side opening including Neoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeddedwith 50X50X6mm Mild Steel Angle Iron Frame and 750 mm above the Normal Ground Level complete withinternal connection with suitable size of cable, cable lugs and cable glandsPCC Foundation in Cement Concrete 1:3:6 (20 mm Graded Stone Aggregate) and Testing after Installation includingcomplete all as specified and comprising of the following :–INCOMING:-(a) INCOMING MCB 40 A 10 KA, 4 POLE , -01 No(b) Aluminium Busbar TPN of size 50 apms - 1 setOUTGOINGS:-(a) MCBTPN 32 Amps,10 KA-3 Nos(b)DOL Starter for 5 HP Pump set-2 Nos( c ) Ammeter Class-1,digital pannal mounting type 96mmx96mm including CT 50X5 Amps 3 Nos & selector switch-2 Nos(d) Voltmeter Class-1, digital pannal mounting type 96mmx96mm 0 & selector switch - 1No(e) LED TYPE indicator lamp1 set (set of three for R,Y,B)(f) Single Phase Preventer - 2 Nos |
| 50 | .Construction of valve chamber with inner clear dimension 600 x 600 x 900mm suitable for 80mm sluice Valves with PCC (1:4:8) 150mm thick type D2 for foundation, Brick masonary 230mm wall in CM (1:4), PCC (1:2:4) 75mm type B1 for coping, rendering in CM (1:4) 15mm thick including provisiion of 3mm thick MS sheet cover and 25 x 25 x 3mm angle frame embeded in coping with two coats of synthetic enamel paint over a coat of redoxide primer with locking arrangements including necessary earth work complete all as specified and directed by Engr-in-Charge |
| 51 | EXTERNAL ELECTRIC SUPPLY: M & L for HT/LT MS cable route indicator, engraved the description on the disc not less than 6\" dia welded with 40x6xmm MS strip of approx length 90 cm duly painted on the steel parts as per colour code and provision of PCC 1:4:8 typr D-2 using 40 mm grade stone aggregate of not less than 0.05 cum in each at base under the ground incl necessary earth work complete all as specified and directed.Note: HT route indicator shall be painted as under. -(i) For HT 11 KV cables - “BROWN”(ii) For LT cables - “BLUE” |
| 52 | Supply and laying DWC (Double wall Corrugated ) duct pipe outer dia 63 mm and inner dia 50 mmconforming IS 16205 (Part 24 ) for protection ofelectric cable complete all as specified and directed. ( for 10 sqmm St light cable & 16 Sqmm cable ) |
| 53 | Supply, installation, testing and commissioning of 11KV Compact Sub Station fabricated from steel sheet of thickness 1.6mm. The outdoor type enclosure shall have IP54 degree of protection for HT & LT switchgear compartment & IP43 degree of protection for Transformer compartment. The enclosure exterior shall be powder coated and PU painted (Colour cream glossy finish). Each compartment will be provided with the door and pad locking arrangement. The compartment illumination lamp with door operated switch shall be provided for each compartment. HT compartment consists of 11KV, 630amp RMU (1VCB + 2LBS) with metering manual type. Transformer compartment consists of 315KVA 11KV/433V, 3Phase 50Hz copper wound oil cooled transformer with off circuit tap changer (+5% to -10% in step of 2.5%) Class A insulation, temp rise in oil/ winding -40/45 deg-C over ambient of 50 deg C as per IS 1180 EEL-2 (Amendment-4) Total loss @ 50%-955W/ Total losses @ 100% 2750W, IMP %- 4.5% with all necessary fitting & accessories as per IS.LT compartment consists of 630A 4P 36KA MCCB with RYB indicator & digital multi function meter & CT’s complete with internal cabling & connections (Make: Secure/ Rishab/ or equivalent) (MCCB Make- ABB/ L&T/Schneider) interconnections between HT LBS & Transformer will be done by using HT cable 120 sqmm single core cable & transformer – LV switchgear will be done by using aluminium bus bar of sufficient size. |
| 54 | Supply, Installation, test and Commissioning, factoryfabricated LT panel board, type tested by CPRI /Authorised Govt. Agencies ,confirming toIEC 60439-1 & 2, LT Feeder Pillar Box made out of 3.00 mm thick CRCA Sheet multifold design, chemically treated surface with multi tank process powder coating,indoor modular type,dust free ,Vermin Proof , totally enclosed with Confirming to IP 43 for indoor panel & Confirming to IP 54 for outdoor panel ,Double door withboth side opening including Neoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeddedwith 50X50X6mm Galvanised iron Angle Frame and 750 mm above the Normal Ground Level complete withinternal connection with suitable size of cable, cable lugs and cable glandsPCC Foundation in Cement Concrete 1:3:6 (20 mm Graded Stone Aggregate) and Testing after Installation includingcomplete all as specified and comprising of the following :– (Main Panel)(a)MCCB 630 A4 pole ,35 KA- 01 Nos ( Main I/C)(b)MCCB 500 A4 pole ,35 KA- 01 Nos (DG Panel )(c)MCCB 200A4 pole ,35 KA- 02 Nos ( APFC& Spare)(d)MCCB 160A4 pole ,25 KA- 01 Nos (Non Essencial Load)(e)MCCB 32A4 pole ,25 KA- 2 Nos ( for MT Sec & Watch tower )(f)LED indicating lamp set- 01 Set of three( g) Ammeter Class-1,digital pannal mounting type 96mmx96mm including CT& selector switch for each outgoing(h) Voltmeter Class-1, digital pannal mounting type 96 mm x 96 mm& selector switch |
| 55 | Supply, Installation, test and Commissioning, factoryfabricated LT panel board, type tested by CPRI /Authorised Govt. Agencies ,confirming toIEC 60439-1 & 2, LT Feeder Pillar Box made out of 3.00 mm thick CRCA Sheet multifold design, chemically treated surface with multi tank process powder coating,indoor modular type,dust free ,Vermin Proof , totally enclosed with Confirming to IP 43 for indoor panel & Confirming to IP 54 for outdoor panel ,double door withboth side opening including Neoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeddedwith 50X50X6mm Galvanised iron Angle Frame and 750 mm above the Normal Ground Level complete withinternal connection with suitable size of cable, cable lugs and cable glandsPCC Foundation in Cement Concrete 1:3:6 (20 mm Graded Stone Aggregate) and Testing after Installation includingcomplete all as specified and comprising of the following :– ( DG Panel)(a)MCCB 500 A4 pole ,35 KA- 01 Nos ( Main I/C)(b)MCCB 320 A4 pole ,35 KA- 01 Nos (For Annex)(c)MCCB 160 A4 pole ,25 KA- 03 Nos( For Hanger & Spare )(d)MCCB 160A4 pole ,25 KA- 01 Nos ( For Fire Pump House)(e)MCCB 32A4 pole ,16 KA- 02 Nos ( For W/s Pump & ST LT )(f)LED indicating lamp set- 01 Set of three( g ) Ammeter Class-1,digital pannal mounting type 96mmx96mm including CT& selector switch for each outgoing(h) Voltmeter Class-1, digital pannal mounting type 96mmx96mm& selector switch(j) Astronomical, digital time swithces -1 No(k) Power contactor MR 13 ,with 230 coil 1 No |
| 56 | Supply, Installation, test and Commissioning, factoryfabricated LT panel board, type tested by CPRI /Authorised Govt. Agencies ,confirming toIEC 60349-1 & 2, LT Feeder Pillar Box made out of 2.00 mm thick CRCA Sheet multifold design, chemically treated surface with multi tank process powder coating,indoor modular type,dust free ,Vermin Proof , totally enclosed with Confirming to IP 43 for indoor panel & Confirming to IP 54 for indoor panel ,single door withboth side opening including Neoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeddedwith 50X50X6mm Galvanised iron Angle Frame and 750 mm above the Normal Ground Level complete withinternal connection with suitable size of cable, cable lugs and cable glandsPCC Foundation in Cement Concrete 1:3:6 (20 mm Graded Stone Aggregate) and Testing after Installation includingcomplete all as specified and comprising of the following :– ( Hanger Panel)(a)MCCB 160 A4 pole ,25 KA- 01 Nos ( Main I/C)(b)MCCB 63 A4 pole ,25 KA- 05 Nos( for 63 Amps 2 nos ,ind socket & , Crane Panel / Hanger door &Spare,)(b)MCCB 40 A4 pole ,25 KA- 05 Nos( for Panel of ,32 amps 3 ph Socket -1 nos ,32 amps 1 ph Socket -1 nos,16 amps 1 ph Socket -1 nos )(b)MCCB 40 A4 pole ,25 KA- 01 Nos( for Lighting Load & Fan Load DB )(e)LED indicating lamp set- 01 Set of three( f ) Ammeter Class-1,digital pannal mounting type 96 mm x 96 mm including CT& selector switch(g) Voltmeter Class-1, digital pannal mounting type 96mmx96mm& selector switch |
| 57 | Supply, Installation, test and Commissioning, factoryfabricated LT panel board, type tested by CPRI /Authorised Govt. Agencies ,confirming toIEC 60349-1 & 2, LT Feeder Pillar Box made out of 2.00 mm thick CRCA Sheet multifold design, chemically treated surface with multi tank process powder coating,indoor modular type,dust free ,Vermin Proof , totally enclosed with Confirming to IP 43 for indoor panel & Confirming to IP 54 for indoor panel ,single door withboth side opening including Neoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeddedwith 50X50X6mm Galvanised iron Angle Frame and 750 mm above the Normal Ground Level complete withinternal connection with suitable size of cable, cable lugs and cable glandsPCC Foundation in Cement Concrete 1:3:6 (20 mm Graded Stone Aggregate) and Testing after Installation includingcomplete all as specified and comprising of the following :– ( Annex Panel )(a)MCCB 320 A4 pole ,35 KA- 01 Nos ( Main I/c)(b)MCCB 160 A4 pole ,25 KA- 01 Nos (VRF AC )(b)MCCB 125 A4 pole ,25 KA- 06 Nos ( for G+4 ,and spare)(c)MCCB 63A4 pole ,25 KA- 1 Nos ( for Lift)(c)MCCB 32A4 pole ,25 KA- 3 Nos ( for Terrace Pump & Spare )(c)MCB 32 A2 pole ,10 KA- 1 Nos ( for Aviation Light )(e)LED indicating lamp set- 01 Set of three ( f ) Ammeter Class-1,digital pannal mounting type 96 mm x 96 mm including CT& selector switch for each outgoing(g) Voltmeter Class-1, digital pannal mounting type 96 mm x 96 mm& selector switch |
| 58 | S&F PVC cable looping boxes of size 300 mm x 200 mm x 105 mm with TPN aluminium busbar and MCB SP 6 Amp- 01 No, 10 KA breaking capacity, C curve series, factory made with PVC sheet including heavy duty connector for connection of 4 core cable & fixed to pole with suitable size flat iron clamp, nuts & bolts complete all as specified and directed by Engr-in-Charge. |
| 59 | REFRIGERATION AND AIR CONDITIONING :Supply and install testing and commissioning of split type air conditioner 2 TR capacity of inverter technology 5 star rating with cordless remote control,single phase,240 volts complete with all accessories such as indoor and outdoor units and refrigerant tubing of adequate length as required at site, indoor mounting plate, duly powder coated fixingwith anchor bolts at any height,drain pipe of suitable size brought to ground level from any height,intial filling of refrigerant gas inculding making round hole on existing wall for taking up refrigerant tubing, drain pipe,cables etc and making good the disturbed surface by matching with existing adjoining surface complete all as specified and directed |
| 60 | Supply and install testing and commissioning of split type air conditioner 1.5 TR capacity of inverter technology 5 star rating with cordless remote control,single phase,240 volts complete with all accessories such as indoor and outdoor units and refrigerant tubing of adequate length as required at site, indoor mounting plate, duly powder coated fixingwith anchor bolts at any height,drain pipe of suitable size brought to ground level from any height,intial filling of refrigerant gas inculding making round hole on existing wall for taking up refrigerant tubing, drain pipe,cables etc and making good the disturbed surface by matching with existing adjoining surface complete all as specified and directed |
| 61 | Supply and fix factory fabricated mild steel stand suitable for installation of out door unit of split type air conditioner fixing arrangement with anchoring bolts on wall surface at suitable height as per site condition. |
| 62 | Supply and install refrigerators, electric driven (single phase), Ac230 V, capacity 190/195 Ltrs ,Digital Inverter techonology having smart inverter compressor , 5 star rated, single door, direct cool complete all as speicified & directed. |
| 63 | Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity0.5 KVA complete all as specified |
| 64 | Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1.0 KVA complete all as specified |
| 65 | Supply and fixVoltage stabilizer for automatic operation,single phase naturally air cooled indoor type ,Wall mounted type & designed for input variation between 150 V to 280 V with output voltage stabilized at230 V with accuracy of ± 2.5%andsuitable for 2 Ton AC complete all as specified |
| 66 | Supply, Installation, test and Commissioning CPRI APPROVED factoryfabricated, indoor type, LT panel board,made out of 2 mm thick CRCA Sheetsingle door withboth side opening including Neoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeddedwith 50X50X6mm Mild Steel Angle Iron Frame and 750 mm above the Normal Ground Level complete withinternal connection with suitable size of cable, cable lugs and cable glandsPCC Foundation in Cement Concrete 1:3:6 (20 mm Graded Stone Aggregate) and Testing after Installation includingcomplete all as specified and comprising of the following :– (Main AC Panel )INCOMING(i) MCCB 4 Pole 160 amp 50 Hz, 415 V with reputing capacity 25 KA with microprocessor based release - 01 No(ii)Voltmeter Digital type 0-500 Volts range flush type with selector switch - 01 No(iii) Aluminium Bus bar TPN - 200 amps - 1setOUTGOING(i) MCCB 3 Pole 40 amp 50 Hz, 415 V with reputing capacity 25 KA with microprocessor based release - 06 No (for Each floor & spare)(xi)Digital type Ammeter 0- 150 amps with selector switch and CT coils of suitable capacity for incoming .-1 No |
| 67 | AVIATION AND OBSTRUCTION LIGHT:Supply and fix aviation obstruction LED type of Bajaj cat No 110731 BGAV 302 LED, 240 V, with timer switch and contactor inside the enclosure complete all as specified and directed |
| 68 | FIRE FIGHTING:S&F sprinkler flexible drop pipe 1 mtr long. |
| 69 | Supply and fixing Sprinkler glass bulb type (Standard response) as per IS:15106/TAC guidelines 68 degree temperature rating pendent type complete all as specified and directed. |
| 70 | Supply & fix fire hydrant landing valve type B (Single head outlet) of 63 mm dia conforming to IS 5290 and all as specified and directed. |
| 71 | Supply and fix Foot Valve conforming to IS 4038, 100 mmdia. |
| 72 | Supply and fix Foot Valve conforming to IS 4038, 150 mmdia. |
| 73 | Supply and fixing Test and Drain valve 50mm, forged brass body, brass chrome plated ball, 304SS stem with Polycarbonated sight glass, indicator and handle made of steel complete all as specified and directed. |
| 74 | Supply and fix Cast Iron Air Valves with single air Outlets, conforming to IS 14845 of size 100 mm dia bore and fixing up in Cast Iron Water supply mains of size 100 mm dia. |
| 75 | S & F foam generator of capacity of 7 Kg/Sqcm total water flow 230 LPM complete all as specified and as directed |
| 76 | S & F Monitors ss304 geared swivel nominal water way of size 63 mm flow capacity 1750 lpm/ min at 7 Kg cm Squre inlet pressure stailnelss steel type (SS304) with geared swivel joints with handwheels have suitable inlet flange and nozzle of specified type and capacity. Monitor shall good hydraulic performance and range. |
| 77 | Supply and fixing S.S Foam Tank Made out of 3mm thick SS 304 plate with required nozzles, stand, level gauge, coupling, jointing materials, etc, with all required accessories of capacity 200 Ltrs and all as specified and directed. |
| 78 | AFFF 3% Foam Concentrate, as per IS:4989, Part-II and all as specified and directed. |
| 79 | FIRE EXTINGUISHER: Supply, Installation,Testing & commissioning ofDRY CHEMICAL POWDER (ABC) stored pressure type fire extinguisher of 9 Kg confirm to IS : 15683, with ISI marked/TAC approved fitted with required accessories including wall suspension brackets. |
| 80 | Supply, Installation,Testing & commissioning of Carbon Dioxide (Co2) type fire extinguisher of 4.5 Kg confirm to IS : 15683, with ISI marked/TAC approved fitted with required accessories including wall suspension brackets. |
| 81 | Fire Extinguisher mechanical Foam type trolly mouted of 9 Liters capacity.Ceasefire 9litrs fire Extinguisher AFFF Foam type , External Cartridge type, Pressure Guage Gross weight 14.6 Kg , empty weight5.6 Kg, Can height 611 MM, Diameter 175 MM, Discharge timeless than 60 Secs controllable discharge mechanism, Minimum 6 Mtrs, Applicable on Class A,B,Can construction deep deawn & CO2 Mig welded Valve Constyruction : Forging & Machining, Internal coating of can : Epoxy powder coating, External coating of can : Epoxy poyster powder coating sheet metal thickness 2.0MM ,1 year warranty. Make Cease Fire Or equivalent in any other approved make |
| 82 | Supply, Installation,Testing & commissioning ofDRY CHEMICAL POWDER (ABC) stored pressure type fire extinguisher of 9 Kg confirm to IS : 15683, with ISI marked/TAC approved fitted with required accessories including wall suspension brackets. |
| 83 | Supply, Installation,Testing & commissioning of Trolley Mounted DRY CHEMICAL POWDER (ABC) stored pressure type fire extinguisher of 25 Kg confirm to IS : 15683, with ISI marked/TAC approved fitted with required accessories including wall suspension brackets. |
| 84 | Supply, Installation,Testing & commissioning of Trolley Mounted MECHANICAL FOAM type fire extinguisher of 45 Ltrs Kg confirm to IS : 15683, with ISI marked/TAC approved fitted with required accessories including wall suspension brackets. |
| 85 | Supply, Installation,Testing & commissioning of trolly mounted Carbon Dioxide (Co2) type fire extinguisher of 22.5 Kg confirm to IS : 15683, with ISI marked/TAC approved fitted with required accessories including wall suspension brackets. |
| 86 | Supply, Installation,Testing & commissioning of5 kg Ceiling Mounted CLEAN AGENT TYPE Fire Extinguisher Working Pressure 15 KGF/CM2 conforming to IS : 15683, with ISI marked/TAC approved fitted with required accessories including ceiling suspension brackets. |
| 87 | FIRE DETECTION SYSTEM:Supply, installation, testing and commissioning of Analog Addressable Fire Alarm Aactive Repeater Panel (Loop power/external power) Fire terminal with inbuit turbo isolator, Backlit LCD Display,having controls For Reset, Mute, Accept, Silence alarms and Self Test, with programmable free keys and Duly Approved byEN54complete all as specified and directed. |
| 88 | Supply, installation, testing and commissioning of sprinklers annunciation panel, microprocessor based indication pane, fully confirms to IS 2189, operation on 230V AC, 50 Hz, battery backup with in build charge, zone wise annunciation window for zone status, relay o/p for common hooter complete all as specified and directed. |
| 89 | Read-M & L for Low smoke Zero helogen flame retardent fire alaram cable2 core, 1.5 mm² copper conductor confirming to BS7629-I , BS6387 & rated for 500 v grade having plaine sraded copper coductutor with priming insulation of glass mica fire resistance tape & secondery insulation of high performancesilicon rubber with electrostatic screen of aluminium fire barrierType LT53 outer sheathconfirming to BS 7655 , red in colourdrawn through & including concealed steel conduit including laying,fixing,connecting complete all as specified and directed. |
| 90 | Supply and fixing Staircase signage down of double side display for staircase downwards (with 2 hours built in battery backup) complete all as specified and directed. |
| 91 | S&F wall mounted LED emergency Exit signage luminaire Lit up using regular mains supply comes with a unique rechargeable Ni-Cd battery capable of emergency back up upto 05 hours complete all as specified and directed. |
| 92 | Supply, Installation, test and Commissioning CPRI APPROVED factoryfabricated, indoor type, LT panel board,made out of 2 mm thick CRCA Sheetsingle door withboth side opening including Neoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeddedwith 50X50X6mm Mild Steel Angle Iron Frame and 750 mm above the Normal Ground Level complete withinternal connection with suitable size of cable, cable lugs and cable glandsPCC Foundation in Cement Concrete 1:3:6 (20 mm Graded Stone Aggregate) and Testing after Installation includingcomplete all as specified and comprising of the following :–Make of MCCB/MCB -MDS/LEGRAND/L&T/HEGGER( Main Fire Fighting Panel )INCOMING(i) MCCB 4 Pole 160 amp 50 Hz, 415 V with reputing capacity 35 KA with microprocessor based release - 01 No(ii)Voltmeter Digital type 0-500 Volts range flush type with selector switch - 01 No(iii) Aluminium Bus bar TPN - 200 amps - 1setOUTGOING(i) MCCB 3 Pole 125 amp 50 Hz, 415 V with reputing capacity 35 KA with microprocessor based release - 01 No(ii) MCB TPN 32 Amp - 02 Nos(iii) 80 HP S/D STARTER - 01 Nos(iv) DOL STARTER 7.5 HP - 01 Nos(v) Motor Protection Relay32-88 amps - 1 No (vi) Motor Protection Relay2-5.5 amps - 1 No(vii) On/Off/Trip Indication Lamps, 220 V AC - 6 Nos(viii) Start/Stop Push Button - 2 Nos(ix) Phase indicating lamps RYB for incoming and each outgoing connection(x) Digital type Ammeter 0- 150 amps with selector switch and CT coils of suitable capacity for incoming and each outgoing connection.-1 No |
| 93 | Supply, Installation, test and Commissioning CPRI APPROVED factoryfabricated,Indoor type, LT panel board,made out of 2 mm thick CRCA Sheetsingle door withboth side opening including Neoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeddedwith 50X50X6mm Mild Steel Angle Iron Frame and 750 mm above the Normal Ground Level complete withinternal connection with suitable size of cable, cable lugs and cable glandsPCC Foundation in Cement Concrete 1:3:6 (20 mm Graded Stone Aggregate) and Testing after Installation includingcomplete all as specified and & directedby Engr-in-charge comprising of the following :– ( Booster terrace pump panel)INCOMING:-(a) Incoming MCCB 40 A 25 KA, 4 POLE , -01 No(b) Busbar TPN of size 100 apms - 1 setOUTGOINGS:-(a) MCB 3 POLE TPN 32 Amps,10 KA-2 Nos(b)DOL Starter for 7.5 HP Pump set- 1 No(c) Ammeter Class-1,digital pannal mounting type 96mmx96mm L&T cat no WDS301FCA00 including CT 50X5 Amps 3 Nos & selector switch -4 Nos(d) Voltmeter Class-1, digital pannal mounting type 96mmx96mm L&T CAT NO.WDS301FEV00 & selector switch - 1No(e) LED TYPE indicator lamp1 set (set of three for R,Y,B)(f) Mini protecrionRelay 4-11 amp - 1 Nos |
| 94 | Supply, Installation, Testing & Commissioning of sheet metal 12U rack (or vendor shall calculate and propose suitable rack) for mounting of Access Conrtoller & DVR\"s as per the technical specification with all mounting accessories etc complete all as per manufacturer\"s instructions |
| 95 | Supply, Installation, Testing & Commissioning of Analogue addressable Controller with built in DVD Amplifier, zone selection for 6 zones, and all Call having 1st level priority for DVD (Fire message), 2nd level for Announcement, least level for Music. And also built in monitoring facility as per the technical specification with all mounting accessories etc. complete all as per manufacturer\"s instructions |
| 96 | Supply, Installation, Testing & Commissioning ofVoice Alarm Call Station, 6 Zone with Multiple zone selector extension card and Gooseneck Microphone. For Reception with all mounting accessories etc Make Bosch LBB1956/00 Plena or equivalent complete all as per manufacturer\"s instructions |
| 97 | Supply, Installation, Testing & Commissioning ofBooster Amplifier for PA system with RMS output (actual) 500 W.7 Mic & 2 Aux Inputs.Built-in MP3 player with remote control for USB, SD/MMC card reader.Preamplifier and Line Output for connecting to a Booster Amplifier.Line Input for connecting the output from any external mixer or another amplifier.Resettable circuit breaker for protection against overload and short circuit as per the technical specification with all mounting accessories etc complete all as per manufacturer\"s instructions |
| 98 | Supply, Installation, Testing & Commissioning of Flush mounted ceilingloud speaker of round in shape 6 Watts power Rated with line matching transformer of selectable wattage laps of 1.5W, 3W & 6W. The Speaker shall be of ABS plastic frame finished in a netural RAL white color With Backbox (True ceiling) |
| 99 | Supply, Installation, Testing & Commissioning of Flush mounted ceilingloud speaker of round in shape 6 Watts power Rated with line matching transformer of selectable wattage laps of 1.5W, 3W & 6W. The Speaker shall be of ABS plastic frame finished in a netural RAL white color Without Backbox (False ceiling) |
| 100 | Supply, Installation, Testing & Commissioning of wall mountedloud speaker 6 Watts power Rated with line matching transformer of selectable wattage laps of 1.5W,3W & 6W. The Speaker shall be of ABS plastic frame finished in a netural RAL white color |
| 101 | Supply, Laying, Terminating, Testing & Commissioning of 2 core 24/0.2 mm ATC twin twisted, FRLS type armored Cable with all mounting accessories etc |
| 102 | SEWAGE DISPOSAL:M & L for laying of DWCPE sewage pipes line 150 mmdia borepipe sftiffnessclass SN 8 includingsealing of joints fittings etc complete with collers complete all as specified and directed |
| 103 | S & F on site LLDPE septic tank,conventional type including mediadesigned to carry sewage and sludge water includingexcavating in soft disintegrated rock, PCC 1:3:6 below foundation.Vent shaft, connection etc complete for effective depth of 1.5m and overall depth of 4 m,for 25 user complete all as specified and as directed. |
| 104 | M&Lfor construction of Soakage wells excavation, in soft disintegrated rock, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonry in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.20 m Dia x 1.50 m Effective Depthm depth complete all as shown on drawings and as specified ( Note Soak Pits must be constructed in pair for each Septic Tank but to be used alternately) |
| 105 | RCC CONVENTIONAL Septic tank designed to carry sewage and sullage water, excavation in soft disintegrated rock, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls, Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 100 users capacity complete all as shown on drawing No AFB/TD\228/2018(S) and as specified |
| 106 | M&Lfor construction ofSoakage wells excavation,soft disintegrated rock, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonry in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.80 m Dia x 3.0 Effective Depthm depth complete all as shown on drawings and as specified |
| 107 | SECURITY WALL, FENCING AND GATE:Providing and fixing of Stainless steel grade 304 capital letter in English with Main letter of name as specified in drawing ( COAST GUARD AIR ENCLAVE)of minimize size not less than 22.00 cm x 35.00 cm with 25 mm raising. The all letters shall also be of Stainless steel grade 304 . The letters shall be fixed with the help of stainless steel studs on Stainless steel sheet 1.50 mm thick wih heating process on MS gate as shown. The stainless-steel studs shall be properly grouted/ fixed with suitable sealant. ( Note :-The design of matters describing letters etc is mentioned in the tender drawing.Test report for conformality of material with specifications shall be provided. The work shall be executed to the satisfaction of Engineer-in-charge. Contractor shall provide a Design of signage with logo for approval from User before implementation at site.) |
| 108 | Design, Fabrication & Installation of Motorised sliding gate for Opening of 35.00 Rm wide and 2.50 Rm height , made out of ornamental and intricate design of Square Hollow Section (SHS) and Rectangular Hollow Section (RHS), gusset plates, rails, braces etc.bottom rail, top guide, running rails and guides ,buffers, stoppers, all from work required guide path etc complete with PU paintings.Providing automation for sliding gates Steel wheels , All bottom master wheel assembly ,All top roller wheel assembly, Drive mechanism (Motor kit) assembly sets (One Master & One slave mechanism) (brake Motor), Change Drive mechanism from master bottom wheel assembly to idler to drive unit, Suitable system for door speed 7 to 10 meter/minute as per international hangar door, dependent on adjustment, Electric cables from drive unit to control panel for all drive units ,Manual key release mechanism for hand operation in case of power failure, Separate electric cable of approved make from control panel to limit switches for all drive units, Limit switches of approved make two for each drive units, Separate control panel with MCB, Relay and emergency stock function in each drive units approved make,Switches for forward-Reverse and stoch function with LED approved make, Hooter blinker for all drive units for visual-Audio safety of door movement approved make, Mechanical buffers approved make at extreme ends to avioud any jerk after door stop at via limit cut, Cable carriers, Remote Control, Magnetic Stopper, Alarm Lamp, Control box approved make,stainless steel wire rope approved make. All nut bolts and other hardwares (H.T),New (HDPE) gasket to cover gap to avoid rain and dust, MS Perforaed sheet at bottom (1.0 Mr Heigh) , Necessary drainage of rainwater to be planned accordingly , Safe and smooth passage of aircrafts to be ensured while designing of bottom of gate, level of rails etc Note :a) Rates deemed to Design of skeleton alongwith Automisation of Motorised Gate from Authorised OEM, submission of detailed drawing, approval from AO, Fabrication and Fixing of gate including fixing of rails, necessary formwork, PQC /PCC, PCC In Foundaion, RCC Fdn alongwith earhwork, formwork, M-30 Grade RCC, Steel Reinforcemen for Lach Post, Counter Balance Post, Pillar or Any Other components related to Gate. |
| 109 | Supply and fix concertinal coilof 750mm outer dia made outof 2.60mmdia spring steel wire 230 gm (min)dipped with corrosion preventive fluid (rusilo 901)of castrolmake including white colouur,each coil having in 50 turns (circles)and an average weight not less than 8.57 kg (plus or minus 5%) including hangle and speke at both ends of coil errectedin position on top of mild steel angle by fixing with MS rodfor securing including necessary welding/clipping to MSsection etc complete all as specified and directed. |
| 110 | EOT CRANE: Design , supply, install, testing and commissioning ofindoor type EOT (electrically operated travelling) double girder over head crane of5 Ton capacity, class III, M7 as per IS:3177 of 2020 and IS : 807 of 2006 and other relevant Indian standards of latest versions having straight travel path, operating on 415 volts, 3 phase, 50Hz, AC and with control voltage not exceeding 110 volts, AC through low voltage transformer with independent movable pendent supported by chain/SS rope, double girder type , floor operated movable pendent control by means of push buttons independent of crab trolly position withprotective panel with down shop lead,trailing cable complete with minimum IP-55 protection for cables, motors panels incl separate canopy for for motors alongwithall accessories/equipments duly epoxy painted complete all as specified and as directed.The span length ,cross travel length & hook height mentioned is tentetive exact span length, cross travel length & hook heightshall be measured at site before fabrication.EOT crane shall be provided with the following specifications and capable for electrically controlled movements:(i)Capacity of Crane : 5 Ton double box girder(ii) Clear span : 45 m (approx)(iii) Bay length : 60 m approx(iv) Hook height : 9.5 m approxNOTE: 1(a) The crane is to be operated in indoor as well as outdoor fully exposed to weaether elements. Adequate IP protective covering over the electrical and mechanical components shall be provided.(b) Thecrane shall be provided with additional storm brakes for anchoring it to cater to storm conditions(c) Automatic electrohydraulic or electromagnetic brakes shall be provided if the service brakes are not electromechanical type. |
| 111 | (d) Unit rate quoted shall be deemed to include provision of electrical wiring of suitable size in rigid metallic conduits fixed on surfaces from main switch upto electrical control panels. All cables shall be armoured copper cables. Provision of ISMC channel welded along with ISMB (gantry girder) and longitudinal travelling rail welded alongwith ISMC.inclusive all supports ,MS insulators & other fittings & fixture as reqd.(e) Clear span and bay length specified and shown on drgs are only indicative. The tenderer shall visit the site and ascertain exact span and bay length before designing / execution.(f) Grantry girder will be provided by Building Contractor(g)Dimensions,capacities/sizes of equipments/ accessories mentoned on drawing are minimumto be provided. Prior approval of Accepting Officer shall be obtainedfor the detailed construction drg and electrical wiring diagram of EOT crane and contractor shall incorporate changes wherever required and the rates quoted above shall deemed to inclusive ofsuch provisions and its accessories before designing / execution. (h) Longitudinal / cross travel shall be limited to 1.0 m away from the wall on both ends(j) The lowest bidder shall prepare Constructional drawing including specification as per the design of approved OEM. In case the lowest bidder is not OEM himself then lowest bidder shall submit an MOU with departmentally approved OEMfor construction and executing of the crane work. Drawings and specifications in both the cases will be subject to approval of accepting officer as per Para (g) above.(k) Any technical clarifications regarding size, capacity, rating and specification and drawings may please be clarified by the bidder from the E-4 section of this office before the Bid is submitted, he should also visit the site where the crane are being installed before submitting the Bid.Note-2 The cranes shall be tested stage wise for 25%,50%, 75% 100% and 25% overload , The rates for all manpower and material and testing arrangement required will be deemed to be included in quoted rates and nothing extra will be admissible on this account. Note 3-Gaurds will be provided all along length with approch ladder on both sides of crane with hand rail on both sides of ladder at a suitable level and ladders should have landing paltforms at every 4 to 5 mtrs or less. |
| 112 | DG SET:Supply, installation, testing and commissioning of Static Silent (Sound proof enclosure) Diesel Engine driven generating set capable of delivering 250KVA at prime mover rating at 85 load factor as per clause 12.3 of ISO 8528 (Part-1), water cooled, 415Volts (AC), 3Phase 4 wire system of supply, 50Hz at power factor 8 minimum. The DG set consists of diesel engine coupled to matching alternator through flexible coupling and mounted on common base frame and complete with control panel standardised by manufacturer fuel tank with mounting arrangement and inlet, outlet return oil arrangement, exhaust pipe complete and suitable for conditions prevalent at Ratnagiri, Maharashtra (capacity of Engine, alternators shall be worked out taking all derating factors into consideration) including PCC foundation (of suitable size leaving at least 0.5m all around for ease of movement 0.5m height), anti-vibrating pads, testing including all features to comply as per IS: 10001/1000/2 and alternator as per IS: 133364, CPCB-IV approval.(i) Engine (primer mover): Diesel engine 1500RPM, direct injection, multi cylinders, four stroke confirming to ISO 3046/ BS 5514, water cooled, naturally turbo charged, capable of giving adequate BHP (not less than 53 BHP) to drive alternator capable of delivering 250KVA at outdoor atmospheric conditions at Ratnagiri, Maharashtra. (taking all derating factor in consideration) including battery 12V/ 24V (as per manufacturer recommendation) electric battery start complete with dynamically balanced fly wheel all standard fittings, fixtures as per manufacturers and including governor (ECPG) and engine protection system (shut down, high water temperature, low lub oil, oil pressure, over speed etc) tank and first fill lub oil & other consumables etc.(ii) Alternator: Brushless AC Alternator, 3 Phase, 415 V, 4 wire rated for output of 250 KVA, minimum power factor 0.8, 1500 rpm, IP23 protection class enclosures, insulation class, “H”, salient pole, revolving field, single bearing automatic voltage regulator coupled through flexible coupling with and to match the above engine. |
| 113 | (iii) Base plate: Made out of structural steel as per manufacturers recommended design/ specifications.(iv) AMF Control Panel: Factory made cubicle type inbuilt LT Panel board indoor type 1.6 mm thick MS CRCA sheet, front opening type, protection class IP-54, duly powder coated after seven tank process, with electrolytic grade copper bus bar of 600 amps capacity for four poles, with al standard switchgear and contactor and protection, internal wiring of adequate size PVC insulated multi-stranded copper conducted cable etc. and also consisting of following:(a) MCCB 4 pole 415 V, 400 amps, 35 KA rupturing capacity, adjustable type 70%-100%- 2 No with suitable HRC backup fuses(b) Digital Ammeter , flush type ISI marked with in-built selector switch 3 way and current transformers 300/5Amp – 03 Nos.(c) Digital Voltmeter:- 0-500 V flush type ISI marked with in-built selector switch 3 way – 01 Set(d) Phase indicating lamps (R-Y-B) – 01 set(e) Frequency meter digital type 45 to 55 Hz – 01 No(f) KWH meter 3 Phase unbalanced load 1200 amps capacity including DT coil set(g) All standard relays, circuit and protection required for automatic operation of Gen set (h) By pass arrangement of suitable cap.(v) Acoustic Enclosures: Sheet metal fabricated cope type silent enclosure manufactured recommendations, however minimum 0.5 m space should be available all around the set height of plinth shall not be less than 0.5 m. |
| 114 | (vi) Foundation/ Plinth/ Base: Shall be provided as per manufacturers recommendations, however minimum 0.5 m space should be available all around the set and height of plinth shall not be less than 0.5 m.(vii) Diesel storage tank of capacity adequate for storage of diesel for 12 hrs operation of Gen set.(viii) Misc. tool kit, operation and Maintenance catalogue, spare part list, overhauling manual, guarantee card etc. shall be provided as per manufacturer standard practices.(ix) The DG set shall be taken over only after it has been tested by the contractor in the presence of an officer nominated by accepting officers as per relevant IS specification/ instruction.(x) All the expense incurred on the above mentioned test shall be born by the contractor without any extra cost to the government. If the result of test is not found satisfactory, the contractor shall at his own expense shall do the rectification of problem. |
| 115 | DISPERSAL AREA:Laying and compacting 200 mm thick (compacted thickness) Granular Sub Base Course (GSB) grading as per Grade V as specified Table 900-1 of MoRTH specifications for Road and Bridge works, 2013, in a two layer over compacted subgrade with natural sand, crushed gravel, crushed stone, or combination thereof as per the grading required. The materials are mechanically mixed, spread and leveling on the subgrade by using motor grader of adequate capacity, and rolling with vibratory roller of capacity 80-1 00 KN static weight for achieving required compaction density of atleast 98% of the Maximum Dry Density. Consolidating to required gradient and camber complete all as specified and directed with finished surface tolerances as per Table 900-1 of MaRTH specifications for Road and Bridge works, 2013. |
| 116 | Supply only non circular synthetic fibre(to be mixed in PQC as per design mix). Make: Recron 3s or Equivalent in other approved makes |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
