|
| 1 | Furniture Works |
| 2 | Manufacturing supply & fixing ofSofa Excel ofof following specification.Inner Frameworks ( 27mm thick panels for frame ) of Sofa made out ofchemicaly treated rubber wood with approved quality .The surface should besmoothly finished by polishing two coats of polyuretahane sealer and one coat of poly urethane top layer.The Marine plywood 9mm thick suppoted with 65x18mm plank( 5 nos ) rubwood for seating. The Seating/back supported upholstered with seat cushions in 100mm thick cusion(curlon or equivalent ) over laid with polywadding sheet 10mm thick (100GSM).Outer Finish in superior quality rexin stiched with nylon bonded thread of approved colour as per directions of Engineer in charge in accordance with manufactures specification.The rate includes all materials,conveyance charges ,labor chages,all accessories like nail bush 25mm etc complete as per directions of Engineer in Charge at all levels (refer the image-1 attached ) |
| 3 | SofaExcel - single seater -850x800x800 |
| 4 | SofaExcel - Three seater-1800x800x800mm |
| 5 | Sofa Excel - Three seater-1690x700x800mm |
| 6 | Manufacturing supply & fixing ofSofa standard of following specification.Inner Frameworks ( 27mm thick panels for frame ) of Sofa made out ofchemicaly treated rubber wood with approved quality .The surface should besmoothly finished by polishing two coats of polyuretahane sealer and one coat of poly urethane top layer.The Marine plywood 9mm thick suppoted with 65x18mm plank( 5 nos ) rubwood for seating. The Seating/back supported upholstered with seat cushions in 100mm thick cusion(curlon or equivalent ) over laid with polywadding sheet 10mm thick (100GSM).Outer Finish in superior quality imported cloth of approved makeandcolour as per directions of Engineer in charge in accordance with manufactures specification.The rate includes all material charges, conveyance charges,labour chages,accessories like nail bush 25mm etc complete as per directions of Engineer in Charge at all levels (refer the image-2 attached ) |
| 7 | Sofa standard- single seater -760x700x800 |
| 8 | Sofa standard - 3+1+1-1690x700x800mm-1no ,760x700x800mm-2nos |
| 9 | Manufacturing ,Supplying and placing in position of glass top Teepoy of size 915x600x500mm made up of chemicaly treated rubber wood of approved quality withframe size 50mm dia leg and with 15mm thick panel and8mm thick tinted/clear glass of approved make etc completed as permanufactures specification.The rate includes all material charges , conveyance charges ,labour chages and accessories like 12mm dia nail bush etc complete as per directions ofEngineer in Charge at all levels (refer the image-3 attached ) |
| 10 | Manufacturing and supplyingCorian top Reception Table of size 3404 (W) X 1000 (D) x 800 (H)mm with following specification-The table top and gable end are made of15mm thick chemicaly treated rubber wood of approved quality with dark honey finish.15mm thick marine plywood is covered woth corian top as per drawing . All exposed sides are finished with 3mm thick white colour laminate and the front sideof table is finished with ivory colour corian top as per drawing. Two storage units of size 450(W) x 450(D) x 550 (H) has been considered. Two drawers unit of size 450(W) x 150(D) x 450 (H) has been considered.All side panels, shelves and drawer facia are made of 24mm thick chemicaly treated rubber wood . The drawer will have a multipurpose lock of approved make with premium quality.Two key board trays with sliding facility is considered .The rate shall be inclusive of all material, transportation, loading - unloading charges,labour charges etccomplete, all as per drawing and directions specified by the Engineer-In-charge.(refer the image /drawing -4 attached ) |
| 11 | Manufacturing and supplying Executive Tableof size 1830 (W) X 930 (D) x 760 (H) with following specification.The table top and gable end are made of 18mm thick chemicaly treated rubber wood of approved quality. The side /stoarage panel is made of 15mm thickchemicaly treated rubber wood.The suface of the panel should be smoothly finish by polishing two coats of polyuretahane sealer and one coat of poly urethane top layer. One storage unit of size 400(W) x 450(D) x 715 (H) has been considered. Four drawers unit of size 400(W) x 150(D) x 450 (H) has been considered. All side panels, shelves and drawer facia are made of 24mm thick chemicaly treated rubber wood . The drawer will have a multipurpose lock of approved make with premium quality.The rate shall be inclusive ofcost of material, transportation, loading - unloading charges,labour charges,all accessories like knob,lock,draw slider,nail bush 25mm dia etcandcomplete, as per manufatctures specification and directionsof Engineer-In-charge at all levels. (refer the image-5 attached ) |
| 12 | Executive Chair-High back revolving chair:Supply & installing of Executive Chairs as per the specification metioned below.The outer and inner frame of the backrest shall be 20mm (16kg) pipe frame.Back Rest shall be high Back with Frame(adjustable height), made out of 40mm foam ( density 32mm) upholstered with rexin of approved colour and quality . Backrest Height shall be 720mm with Backrest Width of 530mm. The seat made out of 40mm foam ( density 32mm) upholstered with rexin of approved colour and quality. Seat width shall be 530mm(clear width between arms),The armrest shall be fixed and made up ofsilver coated fibre with pu hanlde .The armrests shall be fitted to the seat with seat/armrest connecting strip .GAS LIFT: Synchronized with Knee tilt mechanism with 4 position lock with electro paltedTUV -CLASS 4 Gas spring 120mm, Certified with BOSQ logo engraved to ensure best in class quality. The base 550mm made of nylon base with dual PU castor wheel of 60mm dia. All parts shall be tested as per ANSI/BIFMA X 5.1(refer the image-06 attached) |
| 13 | Manufacturig and supplying Executive visitors chairof size 990 (W) X 600 (D) x 500 (H) with following specification.The frame of chair 50x50 mm thick (front side leg and seating frame) 58x45mm (designed leg on back side) shall be made of chemicaly treated rubber wood of approved quality. The seating/back seat made of 9mm thick marine ply wood of approved quality upholsted with 45mm PU foam covered with inported fabrics of approved quality and colour .The suface of the panel should be smoothly finish by polishing two coats of polyuretahane sealer and one coat of poly urethane top layer.The rate shall be inclusive ofcost of all material, transportation, loading - unloading charges,labour charges accessories like nail bush 12mm dia etcall complete, as per manufatctures specification and directionsof Engineer-In-charge at all levels.(refer the image-7 attached ) |
| 14 | Low back revolving chair:Supply & installing of Chairs as per the specification metioned below.The outer and inner frame of the backrest shall be 20mm (16kg) pipe frame.Seatingsize 450mmx470 mmshall benylon baseand made of Pu form 40mm thick (32 density)upholstered with rexin of approved colour and quality and nylon net Backrest440x550 mm of approved colour and quality .Hydraulic LIFT: push back Synchronized with simple mechanism with 4 position lock with electro paltedTUV -CLASS 4 Gas spring 120mm, Certified with BOSQ logo engraved to ensure best in class quality. The base 450mm made of nylon base with dual PU castor wheel of 60mm dia. All parts shall be tested as per ANSI/BIFMA X 5.1 (refer the image-08 attached) |
| 15 | Manufacturing and supplying Executivechairof size 1100 (W) X 510 (D) x 470 (H) with following specification.The chair shall be made of frame (seating /back frame 70x25 mm thick,designed leg of 75x45 on front side, designed leg of 58x45mm on back side,and arm rest 70x25mm thick) chemicaly treated rubber wood of approved quality. The seating/back seat made of 9mm thickply wood of approved quality upholsted with 70mm PU foam covered with imported fabrics of approved quality and colour. The suface of the panel should be smoothly finish by polishing two coats of polyuretahane sealer and one coat of poly urethane top layer.The rate shall be inclusive ofcost of material, transportation, loading - unloading charges,labour charges and accessories like nail bush 12mm dia etc complete, as per manufatctures specification and directionsof Engineer-In-charge at all levels.(refer the image-9 attached ) |
| 16 | Medium back revolving chair:Supply & installing of Chairs as per the specification metioned below.Back Rest/seatingshall be12mm thick plywood covered with pu form 40 mm thick upholstered with imported fabrics of approved colour and quality . Backrest Height shall be 600mm with Backrest Width of 530mm.Seat width shall be 530mm(clear width between arms),The armrest shall be couch handle upholstered with imported fabrics of approved colour and qulaity.The armrests shall be fitted to the seat with seat/armrest connecting strip .GAS LIFT: push back Synchronized with simple mechanism with 4 position lock with electro paltedTUV -CLASS 4 Gas spring 120mm, Certified with BOSQ logo engraved to ensure best in class quality. The base 550mm made of nylon base with dual PU castor wheel of 60mm dia. All parts shall be tested as per ANSI/BIFMA X 5.1(refer the image-10 attached ) |
| 17 | Manufacturing a supplying shelf/file rackof size andwith following specification.The storage side panels ,shelves ,top and bottom panels are made up of 15mm thickchemicaly treated rubber wood of approved quality.The door shutter are made of 24/15mm thick ( frame 24mm thick and panel slat 15mmthick) chemicaly treated rubber wood. The handles are Satin SS finish of 160mm pitch.All hinges considered are premium make. Necessary good quality hardwares have been considered as required. The shelf will have a multipurpose lock of approved make with premium quality.The rate shall be inclusive ofcost of all material ,accessories ,labour charges, transportation, loading - unloading charges and accessories like handle,nail busi 25mm dia etc complete, as per manufatctures specification,drawings and directionsof Engineer-In-charge st all levels.(Refer Image-11 attached) |
| 18 | Shelf big/file rack as per dwg-[W-3 x D-0.40 x H-0.80m]- 2no |
| 19 | Shelf Big - / File rack - as per Dwg [W:7.6 x D: .45 x H: .60m] |
| 20 | Manufacturig and supplying shelf/wardrobof size andwith following specification.The storage side panels ,shelves ,top and bottom panels are made up of 18mm thick marine plywood with both side decorative laminate.The door shutter are made of 18mm thick marine plywoodwith both side decorative laminate on both sides. The handles are Satin SS finish of 160mm pitch.All hinges considered are premium make. Necessary good quality hardwares have been considered as required.The shelf will have a multipurpose lock of approved make with premium quality and stainless flush handle on each shutter .The inside of the storage plywood is covered with 3mm thick white coloured mica. The rate shall be inclusive ofcost of all material ,accessories like handle,lock, nail bush 25mm dia ,labour charges, transportation, loading - unloading charges etc complete all as per manufatctures specification,drawings and directionsof Engineer-In-charge at all levels.(refer drawing /image 12 attached) |
| 21 | Shelf Big - / wardrobe - as per Dwg [W:19.5 x D: .50 x H: 2.50m] |
| 22 | Shelf Big - / wardrobe - as per Dwg [W:9.65 x D: .50 x H: 2.50m] |
| 23 | Manufacturing and supplying office Table with two seaterunit of size 2400 (W) X 760 (D) x 910 (H) withfollowing specification.The table top and gable end are made of 18mm thick chemicaly treated rubber wood of approved quality. The suface of the panel should be smoothly finish by polishing two coats of polyuretahane selaler and one coat of poly urethane top layer. Two drawers unit of size 450(W) x 200(D) x 450 (H) has been considered. Two key board tray with sliding facility is considered .Two storage unit of size 450(w)x500(H)x500 (D) is considered.All side panels, shelves and are made of 18mm thick chemicaly treated rubber wood.The drawer /storage shutter frame shall be made of chemicaly treated rubber wood (24mm thick frame and inside panel 18mm thick). The drawer will have a multipurpose lock of approved make with premium quality.The rate shall be inclusive ofcost of all material, transportation, loading - unloading charges,labour chargesand accessories like handle,lock,draw slider ,nail bush of dia 25mm etc complete, as per manufatctures specification and directionsof Engineer-In-charge at all levels.(refer the image -13) |
| 24 | Manufacturing and supplying cotof size 1995 (W) X 1530 (D) x 850 (H) with following specification.The main frame made byplank of size 127x35 mm and all legs of size 100x30mmare made of chemicaly treated rubber wood of approved quality.Base slat of the cot is made up of 9mm thick marine plywood of approved quality supported by cross member of size 100x30mm. All slats like side slat/foot /head boardis made of 15mm thickchemicaly treated rubber wood.The suface of the panel should be smoothly finish by polishing two coats of polyuretahane sealer and one coat of poly urethane top layer.The rate shall be inclusive ofcost of all material, transportation, loading - unloading charges andaccessories like nail bush of dia 25mm etc complete, as per manufatctures specification and directionsof Engineer-In-charge at all levels.(refer the image -14 attached) |
| 25 | Manufacturing and supplying cot with head board of size 2040 (W) X 1670 (D) x 300 (H) with following specification.The main frame made bypanel of 24 thickmade of chemicaly treated rubber wood of approved quality. All slats like side slat/base slat/foot /head boardis made of 24mm thickchemicaly treated rubber wood.The suface of the panel should be smoothly finish by polishing two coats of polyuretahane selaler and one coat of polyurethane top layer with dark honey finish.The bed side ofhead board ( 2470x1340x25)is finished with 3mm thick white coloured veneer over 15 thick plywood and 32mm thick cusion upholsterd with rexin of apporved quality and colour.The rate shall be inclusive ofcost of all material, transportation, loading - unloading charges and accessories like nail bush of dia 25mm etc complete, as per manufatctures specification,drawings and directionsof Engineer-In-charge st all levels.(refer the image/drawing -15 attached) |
| 26 | The manufacturing and installation of cot unit of size 400(W) x 450(D) x 450 (H) made up of 15mm thk chemically treated rubber wood of approved qualitywith premium central locking and one drawer unit of size 400(W) x 180(D) x 450 (H) has been considered with roller slide mechanism for added mobility.The suface of the panel should be smoothly finish by polishing two coats of polyuretahane sealer and one coat of polyurethane top layer .The rate shall be inclusive of of material, transportation, loading - unloading charges,labour charges and accessories like Draw slider ,handle ,12mm dia nail bush etccomplete, all as per drawing and directions specified by the Engineer-In-charge.(refer the image -16) |
| 27 | Manufacturing and supplying 2 door wardrob of size 1920 (w) X 1066 (d) X 590 (h) with following specification.The storage side panels and shelves ,top are made up of 15mm thick chemically treated rubber wood of approved quality. The door/drawer shutter are made of 24mm thick chemically treated rubber wood of approved quality . The back side panel ismade of 12mm chemically treated rubber wood of approved quality.The top most part of the wardrobe has an aluminum hanger rod of premium make. two drawers of size 400(W) x 150(H) x 450 (D) made of 15mm thick chemically treated rubber wood of approved quality has been considered. The drawer will have a multipurpose lock of premium make. The wardrobe handles are Satin SS finish of 160mm pitch.All hinges considered are premium make. Necessary good quality hardwares have been considered as required.The suface of the panel should be smoothly finish by polishing two coats of polyuretahane sealer and one coat of polyurethane top layer.The rate shall be inclusive of cost of all material, transportation, loading -unloading charges ,labour charges and accessories like lock,handle,mirror 4mm ,nail bush of dia 25mm etc complete, as specified by the Engineer-In- charge(refer the image -17) |
| 28 | Manufacturing and supplying 2 sliding door wardrob of size 1000(w) X 2100 (d) X 550(h) with following specification.The storage side/back panels and shelves ,top are made up of 18mm thick marine plywood .All exposed of panels are finished with veneer of approved qualiy and colour.The inside of the wardrob is finised with 3mm thick colured mica ao approved quality.Thesliding door shutter are made of 18mm thick marine wood finished by venner is fixed by stanless steel sliding rail with automatic closing system. .The top most part of the wardrobe has an aluminum hanger rod of premium make. All hinges considered are premium make. Necessary good quality hardwares have been considered as required.The rate shall be inclusive of cost of material, transportation, loading -unloading charges,labour charges, and all accessories like lock ,slider,nail bush 25mm dia complete, as specified by the Engineer-In- charge(refer the image -18) |
| 29 | Manufacturing and supplying farm Tableof size 1220 (W) X 760 (D) x 910 (H)with following specification.The table top and gable end are made of 25mm thick chemicaly treated rubber wood of approved quality. The modesty panel is made of 18mm thickchemicaly treated rubber wood.The suface of the panel should be smoothly finish by polishing two coats of polyuretahane sealer and one coat of poly urethane top layer. All legs (tapered) of 50mx50mm size are made of 18mm thick chemicaly treated rubber wood.The rate shall be inclusive ofcost of all material, transportation, loading - unloading charges,labour charges and accessories like nail bush 12 mm dia complete, as per manufatctures specification and directionsof Engineer-In-charge at all levels.(refer the image -19 attached ) |
| 30 | Manufacturing and supplying wooden chair offollowing specification. Main leg (designed) shall be 30mmdia and seater panel 25 mm thickchemicaly treated rubber wood.The suface of the panel should be smoothly finish by polishing two coats of polyuretahane sealer and one coat of poly urethane top layer .The rate shall be inclusive ofcost of material, transportation, loading - unloading charges,labour chargesand accessories like nail bush 12mm dia etc complete, as per manufatctures specification and directionsof Engineer-In-charge at all levels.(refer the image -20) |
| 31 | Wooden chair with Arm/MCC - 470x440x900 |
| 32 | Wooden chair without Arm-440x430x900-dining table |
| 33 | Wooden chair with arm -colonial-470x440x900 |
| 34 | Manufacturing and supplying Reception Tableof size 1200 (W) X 760 (D) x 9100 (H)with computer facility with following specification.The table top and gable end are made of 18mm thick chemicaly treated rubber wood of approved quality. The modesty panel is made of 18mm thickchemicaly treated rubber wood.The suface of the panel should be smoothly finish by polishing two coats of polyuretahane sealer and one coat of polyurethane top layer. One drawers unit of size 400(W) x 150(D) x 450 (H) has been considered. . Two storage units of size 450(W) x 450(D) x 550 (H) has beenconsidered. One key board tray with sliding facility is considered . All side panels, shelves and drawer facia are made of 18mm thick chemicaly treated rubber wood . The drawer will have a multipurpose lock of approved make with premium quality.The rate shall be inclusive ofcost of material, transportation, loading - unloading charges ,labour charges and accessories like 25mm dia nail bushcomplete, as per manufatctures specification and directionsof Engineer-In-charge at all levels.(refer the image -21 attached) |
| 35 | Manufacturing and supplying Glass top Square Tableof size 1200 (W) X 1200 (D) x 780 (H)withfollowing specification.12mm thick toughned glass laid over the main frame shall be made of size 80x80mm leg andwith 60x30mm rectangular frame made up of chemicaly treated rubber wood of approved quality. The suface of the panel should be smoothly finish by polishing two coats of polyuretahane sealer and one coat of poly urethane top layer.The rate shall be inclusive ofcost of material, transportation, loading - unloading charges,labour chargesand all accesssories like nail bush of dia 25 etc complete, as per manufatctures specification and directionsof Engineer-In-charge at all levels.(refer the image -22 attached ) |
| 36 | Manufacturing and supplying LCD wall unitof size 1150x1350x andwith following specification.The panels are made up of 15mm thick marine plywoodwith decorative laminate on both side.The rate shall be inclusive ofcost of all material ,fitting accessories ,provision for switch board , labour charges, transportation, loading - unloading charges ,labour charges and all fixing accessories etc complete, as per manufatctures specification,drawings and directionsof Engineer-In-charge at all levels.(Refer drawing-23 attached ) |
| 37 | Manufacturing and supplyingwritting table of size 1200x600x750mm and with following specification.The panels are made up of 18mm thick marine plywoodwith both side decorative laminate.Two drawer unit of size 450(W) x 300(D) x 500 (H) has been considered. The rate shall be inclusive ofcost of all material ,fitting accessories ,labour charges, transportation, loading - unloading charges,labour charges and all accessories like lock,slider ,nail bush of dia 12mm etc complete, as per manufatctures specification,drawings and directionsof Engineer-In-charge st all levels.(Refer drawing-24 attached ) |
| 38 | Manufacturing and supplying luggage rackof size 970 (W) X 550 (D) x 680 (H)withwith following specification.The main frame shall be made of size 60x60mm leg and panel with 30x15mm made chemicaly treated rubber wood of approved quality. The suface of the panel should be smoothly finish by polishing two coats of polyuretahane sealer and one coat of poly urethane top layer.The rate shall be inclusive ofcost of material, transportation, loading - unloading charges ,labour charges and accessories like 12mm dia nail bushetc complete, as per manufatctures specification and directionsof Engineer-In-charge at all levels.(refer the image -25) |
| 39 | Manufacturing and supplying dressing tableof size 610(W) X 490 (D) x 1530 (H)withwith following specification.The table top and gable end are made of 15mm thick chemicaly treated rubber wood of approved quality. The suface of the panel should be smoothly finish by polishing two coats of polyuretahane selaler and one coat of poly urethane top layer The rate shall be inclusive ofcost of material, transportation, loading - unloading charges and labour charges and all accessories like draw slider, nail bush of 12mm dia etc complete, as per manufatctures specification and directionsof Engineer-In-charge at all levels.(refer the image -26 attatched) |
| 40 | Manufacturing and supplying panellingof size 610 (W) X 1400 (D) x 24 (H)withwith following specification.The frame of panel are made of 24mm thick chemicaly treated rubber wood of approved quality. 4mm mirror is fixed to 15mm thick rubwood panel.The suface of the panel should be smoothly finish by polishing two coats of polyuretahane selaler and one coat of poly urethane top layer.The rate shall be inclusive ofcost of material, transportation, loading - unloading charges,labour chargesand all accessories like lock, draw slider and 12mm dia nail bush etc complete, as per manufatctures specification and directionsof Engineer-In-charge at all levels.(refer the image -27 attached) |
| 41 | Manufacturing and supplying rectangular Tableof size 1830 (W) X 915 (D) x 760 (H)(6 seater) withwith following specification. The table top shall bemade up of24mm thickand the main frame shall be made of size 136mm dia leg (empire type ) and table top shall be supported on 70x18mm size reaper band made up of chemicaly treated rubber wood of approved quality. The suface of the panel should be smoothly finish by polishing two coats of polyuretahane sealer and one coat of poly urethane top layer.The rate shall be inclusive ofcost of material, transportation, loading - unloading charges,labour charges and accessories like 25mm dia nail bush etc complete, as per manufatctures specification and directionsof Engineer-In-charge at all levels.(refer the image -28 attached)) |
| 42 | Manufacturing and supplying wooden chair (antique without arm)of size 920x430x410 with following specification. The main frame shall be made of68x24mm and panel shall be 50x15 mm thick ,cross band on bottom of size 30x24mm chemicaly treated rubber wood.The suface of the panel should be smoothly finish by polishing two coats of polyuretahane sealer and one coat of poly urethane top layer .The rate shall be inclusive ofcost of material, transportation, loading - unloading charges ,labour charges and accessories like 12mm dia nail bush etc complete, as per manufatctures specification and directionsof Engineer-In-charge at all levels.(refer the image -29 attached) |
| 43 | Manufacturing and supplying Dias Tableof size 3140 (W) X 760 (D) x 760 (H)withwith following specification.The main frame/panels/racks shall be made ofchemicaly treated rubber wood of approved quality with 15mm thick annd top panel shall be of 18mm thick . The suface of the panel should be smoothly finish by polishing two coats of polyuretahane sealer and one coat of poly urethane top layer.The rate shall be inclusive ofcost of material, transportation, loading - unloading charges ,labour charges and accessories like 12mm dia nail bush etc complete, as per manufatctures specification and directionsof Engineer-In-charge at all levels.(refer the image -30 attached) |
