}

Tender For Annual Repair And Maintenance Of Miscellaneous Civil Works At Upsida I.A. Sahibabad Site-4 Distt. Ghaziabad - Surface Dressing Of The Ground Including Removing Vegetation And In-Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead , sahibabad-Uttar Pradesh

Uttar Pradesh State Industrial Development Corporation Limited has published Tender For Annual Repair And Maintenance Of Miscellaneous Civil Works At Upsida I.A. Sahibabad Site-4 Distt. Ghaziabad - Surface Dressing Of The Ground Including Removing Vegetation And In-Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead . Submission Date for this Tender is 01-07-2025. Paver Blocking Tenders in sahibabad Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

49806555
Tender For Annual Repair And Maintenance Of Miscellaneous Civil Works At Upsida I.A. Sahibabad Site-4 Distt. Ghaziabad - Surface Dressing Of The Ground Including Removing Vegetation And In-Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead
Tender
Indian
Uttar Pradesh
Sahibabad
01-07-2025

Tender Details

Tender For Annual Repair And Maintenance Of Miscellaneous Civil Works At Upsida I.A. Sahibabad Site-4 Distt. Ghaziabad - Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m (with help Minimum 01 JCB & 35 Labour deployed daily) Clearing jungle including up rooting of rank vegetations grass.push wood trees and samplings of grith upto 30 cms measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of area cleared Tractor with trolly including POL and driver.for waste collection from Surface Dressing and Jungle Cleaning water tanker with sprinkler 5000 lit. or above cap.with POL/Drier Including filling of water etc. Providing hydraulic excavator cum loader including POL & driver 1 cum bucket Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of property designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tasted for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained frem Intemational/Government Laboratory Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4955-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally In such a situation, the Employer/Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as Providing & Fixing of cement concrete kerb with top and bottom width 115 and 165 mm resepctively, 250 mm high in M-20 Grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone laid with kerb laying machine foundation concrete laid manually, all complete as per clause 408 Rates as per PWD SOR-2022 Ghaziabad Circle SI No. 22.19 New Fixing and laying at or near ground level factory made old kerb stone in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer in-charge (length of finished kerb edging shall be measured for payment). (Labour Rate Only). Rates as per Sanction Job No. CD-19 Cement Concrete with 2 cm gauge approved stone ballast coarse sand & cement in the proportion of 1:2:4 including supply of all materials labour tools & plants etc reguired for proper complection Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth Painting or varnishing work in small areas or new wood work with one coat (upto one square metre of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm the ISI no. 103-1950. Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ color using hot thermoplastic material by fully semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. Cement Concrete with 4 cm gauge approved stone ballast coarse sand & cement in the proportion of 8:4:1 including supply of all materials labour tools & plants etc reguired for proper complection of the work SI NO. 5.11 First class Brick Work in 1:6 cement & coarse sand 1.25 F.M. mortar in foundation and plinth including supply of all materials. labour and T&P etc. requried for proper completion of the work. Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness motor grader on prepared surface, first compacting in trenches by Small Ride-on Double Drum Vibratory Roller, Capacity: 3-4 Tonnes and then compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and Providing and laying 80 mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as per direction of T 14 Laying old cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). SOR Ghaziabad New Item 20.13 12 mm thick Plaster with Cement and Coarse sand of 1.25 fineness modules in 1:6 over brick work minimum thickness not to be lessthen 1 Cm including supply of all materials, labour, tools & Plants etc required for proper completion of the work. SOR Ghaziabad 13.14 R.C.C. work with cement, approved coarse sand & 20mm approved stone ballast in proportion of 1:1.5:3 in Lighter Beam including aupply all materials but excluding supply of reinforcement & its bending but including its fixing in position & binding the same with 24 BWG GI binding wire & including the cost of binding wire & including providing & fixing necessary centering & shuttering & its removal after completion of work & supply of all other materials, labour T&P etc.required for proper completion of work. SI No. 5.19 S/F M:S (tor steel or plain) in plain work such as R:C:C work including bending for proper shape as necessary including bending for proper completion of the work and including supply of all steel & wastage, bend, hooks, and authorised overlapping shall be measured etc all complete as per direction of engineer in charge. Earth work in embankment in ordinary soil earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5 m lift and 30m lead. The earth in form of cutting to be used as spoil banks within 50m distance as directed by the Engineer-in-Charge. Lead Upto 10 Kms. As Per SI No. 253 A+ 231(A)

Key Value

Document Fees
INR 5550 /-
EMD
INR 440568.0 /-
Tender Value
INR 1.86 Crore /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail