|
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram,gravel,stoney earth and earth mixed with small size boulders SS.20B in ordinary soil and to full depth as may bedirected except in hardrock requiring blastinginclusive of shoringand baling out water wherever necessary refillingthe sides of foundation with excavated soilotherthan sand in layers of 15cm thick well rammed andcompleted depositing the surplus excavated soil with in the compound inplaces shown by the departmental officers with intial lead and lifts and cleaning and levelling the site etc.,complete with standard specification |
| 2 | Footings |
| 3 | Grade beam |
| 4 | Plain Cement concrete 1:4:8 (one cement, four sand, eight aggregate) using 40mm gauge handbroken granitestone jelly for foundation including dewatering if foundnecessary and laid in layers of not more than 15 cmthick and compacted,etc., complete complying withstandard specfication. |
| 5 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X60cm X 10cm and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed (SI 154-A) |
| 6 | Footing,Grade & Plinth Beam |
| 7 | Columns |
| 8 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) |
| 9 | Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors. |
| 10 | Brick work in following Cement Mortar using best quality of Country Bricks of size 8-3/4\" x 4-1/4\" x 2-3/4\" for foundation and basement including curing, etc., complete complying with standard specifiction. |
| 11 | Plastering with cement mortar 1:5 (One cement and five sand) ,12 mm ,thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications |
| 12 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 13 | Supplying and fixing of M.S grill of approved design for doors, windows and ventilators using necessary mild steel flats for inner and outer memebers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications. |
| 14 | Painting Two Coats on new Iron works with best synthetic enamel paint of approved colour and quality – 10m2. |
| 15 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X60cm X 10 cm and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed (SI 154-A) |
| 16 | Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specification |
| 17 | Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. |
| 18 | Supplying and laying Rubberised interlocking Paver blockM40 grade 63mmthick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approvednon skitting surface in the top and the rate including levelling the base preparation ofpavers as sub base, stone dust cushion 150mm thick layingout of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. |
| 19 | Supplying and Planting of Neem tree sapling, Punjai, Naval trees planting, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. PWD PD- 1821 |
| 20 | Supply and fixing of see saw 4 seater FRP seat to a height of 0.50 with 80mm dia leaver and 40mm top bar with M.S. pipe the seater is moulded plastic with heavy duty push bearing, the cost shall inclusive of all materials labours and fixing etc, complete as directed by the departmental officers. |
| 21 | Supplying and fixing of slide which is made of 40mm dia GI/MS pipe for lader side supports, slider side supports and hand rails provided with 20mm GI pipe for lader and slider portion made up of stainless steel sheets as directed by dept. officers including cost and conveyance of all materials and labour for fixing in position. |
| 22 | Supplying and fixing of two seaters swing which is made up of 40mm dia GI pipe for side supports and swing bars connecting and chairs are with stand the weight of 100 kgs with stainless steel plates for seating arrangements including cost and conveyence of all materials and labour charges for manufacturing and fixing in position as directed by dept, officers, etc. complete |
| 23 | Supply and fixng of TNEB meter board suitable for 32A service centre with 32A fuse unit (500v) 32A natural link and earth link (1\"\"*1/8\"\" copper flat) on TW plonds of size 375mm*300mm*19mm with supporting TW reepels of 1\"\" thick on either side with painting with suitable bolt and mts for filling the tw plonds on with earth correction and inter correction with 7/20pvc insolved copper wire from to fuse unit with 1no40Amp |
| 24 | Earthing as per the ISI specification with an earth electrode of 2.10 metre Class \"B\" GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry (SD-211) |
| 25 | Supplying and fixing of6 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm)76.10mm OD x 3.65mm Thick x 6000mm Length (PWD SOR PAGE. 148) |
| 26 | Supplying and fixing ofSINGLE PHASE DISTRIBUTION BOARD 4 ways single phase DBNo. of ways incomer MCB / Isolator - 2No. of ways incomer ELCB / RCD - 2No. of outgoings ways - 2( PAGE. 204 SOR Vol 1) |
| 27 | Supply and laying of 2 x 6 sq.mm PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good (SD-656) |
| 28 | Supply and delivery of MS Kiosk of size0.75m x 0.45m x 0.75m made up of MSangle of size 50mm x 50mmx 4mm alroundcovered with 16 gauge MS sheet and kioskdoor made up of MS plates of size 25 mm x3 mm including cutting, welding, grinding,locking arrangements and labour chargesetc., TWAD p.No 91 |
| 29 | Supplying and fixing of 30W LED Street light fitting with LED outdoor fittings Higher end philips/havells/Equivalent etc complete. Pwd sor page M-1290 Vol1 P.No 169 |
| 30 | Supplying, erecting and Fixing of 3 seater Granite seating bench. L shaped bases support in natural cement color of suitable size, as per standard specification. Complete (Size 2m x 0.45m x 0.75m and leg size 0.60m x 0.60m x 0.10m) |
| 31 | Supplying, erecting and Fixing of Dust pin ment color of suitable size, as per standard specification. Complete |
