}

Tender For 276 - Strengthening Of Art And Craft Hall, Toilet And Roof Repair At Gsss Jawda Ii, Block Nimbahera, Dist - Chittorgarh - 1 Part-A (Building Work) Based On Bsr Pwd - 2022 Chittorgarhcircle 2 Providing And Fixing Steel Gate, Grating , And Gr, chittorgarh-Rajasthan

RAJASTHAN COUNCIL OF SCHOOL EDUCATION has published Tender For 276 - Strengthening Of Art And Craft Hall, Toilet And Roof Repair At Gsss Jawda Ii, Block Nimbahera, Dist - Chittorgarh - 1 Part-A (Building Work) Based On Bsr Pwd - 2022 Chittorgarhcircle 2 Providing And Fixing Steel Gate, Grating , And Gr. Submission Date for this Tender is 02-07-2025. Toilet Bathroom Tenders in chittorgarh Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

49803736
Tender For 276 - Strengthening Of Art And Craft Hall, Toilet And Roof Repair At Gsss Jawda Ii, Block Nimbahera, Dist - Chittorgarh - 1 Part-A (Building Work) Based On Bsr Pwd - 2022 Chittorgarhcircle 2 Providing And Fixing Steel Gate, Grating , And Gr
Tender
Indian
Rajasthan
Chittorgarh
02-07-2025

Tender Details

Tender For 276 - Strengthening of Art And Craft Hall, Toilet And Roof Repair At Gsss Jawda Ii, Block Nimbahera, Dist - Chittorgarh - 1 PART-A (Building Work) Based on BSR PWD - 2022 ChittorgarhCircle 2 Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 3 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required. 4 0.80 mm thick with zinc coating not less than 275 gm/m2 5 Providing and fixing welded mesh/expanded metal mesh in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, crews, clips etc. complete (excluding frame work) of size. 6 Welded mesh 50 mmx 50 mm x 2.1 mm 7 Brick work with clay flyash F.P.S. brick(IS 13757- 1993 ) of class designation 75 in superstructureaboveplinth level upto floor five level in :Cement mortar 1 : 6 (1 cement : 6 coarse sand) 8 COPING:-Providing and laying cement concrete including curing compaction etc. complete in retaining walls, return walls, walls(any thickness) including attached pilasters, columns, piers, abutments, pillers, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc upto floor five levelexcluding the cost of centeringand shuttering.M15 grade nominal mix 1:2:4(1 cement:2 Coarse sand :4 gradeed stone aggregate20 mm nominal size). 9 Kota stone slab flooring 25 mm thick over 20 mm (average) thickbase laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completewith base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm 10 Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete For area of each slab upto 2001Sqcm 11 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20 mm thick 12 Exterior finishing :- Painting exterior surface ofWallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty,etc complete in all respect including scaffolding and safety provisionNew Work 13 Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : Two or more coats on new work

Key Value

Document Fees
INR 1000 /-
EMD
INR 10940.0 /-
Tender Value
INR 5.47 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail