Supply Installation Testing And Commissioning Of Submersible Pump/ Monoblock Pumps At Water Emergency Filling Point At Daulatpur And Ujwa Bps, Delhi-Delhi

supply installation testing and commissioning Of Submersible Pump/ Monoblock Pumps At Water Emergency Filling Point At Daulatpur And Ujwa Bps= 1 Supply of open well submersible mono block pump set for emergency filling point having 7.5 HP capacity withdischarge 1150-970-720 LPM on20-25-30 mtr head, 3 phase, 415 volt, 50 Hz. Deliveryoutlet 80 mm Make- SU/BS/ModyGreat India/Skope/KBL/KSB/GGL/Lubi as per DJB approved 2 Making /supply of 80 mm dia ,3.05 mtrs long approx . double flanged GI pipe having 3 Nos L- Type brackets duty welded on each side of flange. The flanges having four holes and one cut for cable make –TATA /Jindal as per DJB approved 3 M.S. chamber cover and civil work as per site requirement 4 Nut Bolts, Washer of good quality as per requirement 5 Supply and installation of Triple spur geared chain pulley block ( heavy duty) Capacity 1 Ton with 6 meter lift with tripod standas per site requirement 6 Workmanship Charges for lowering the submersible pump set one no. in new bore well, Fixing/Erection/Installation of E&M equipment, accessories, testing and commissioning on load with satisfactory functioning of Pump. The work includes all sundry required items for completion of work, i.e., eccentric taper, rubber gasket, necessary reinforcement and vibration isolation arrangement, etc. and loading, unloading, cartage, making good all damages caused during installation and restoring the same to their original finish as required, adequate safety provision, barricading, warning signal and other safety measures while executing the work or wherever necessary so as to avoid accident. 7 Testing & commissioning of panel & old and new allied accessories as per required parameters with relevant IS testing of the panel prior to switching on as follow: (1) Continuity and earth testing (2) Meggaring of all equipments for phase to phase, neutral to body, neutral to earth and phase to earth. (3) Checking for all tightness of nut and bolts (4) Alignments of doors etc. (5) Interlocking tests. (6) All function tests, Testing on load with engineer in charge

INR 500 /-

INR 19500.0 /-

INR 9.74 Lakhs /-