Stage Contract For Repair And Maintenance Of Civil And Electrical Works Of Offices And Buildings Under The Jurisdiction Of Estates Special Sub-Division Jammu.- 1 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1 meter from cutting edge. 2 All kinds of soil. 3 Ordinary rock. 4 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 5 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size). 6 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 7 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 8 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). 9 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). 10 Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). 11 Centering and shuttering including strutting, propping etc. and removal of form work: 12 Foundations, footings, bases of columns etc. for mass concrete. 13 Suspended floors, roofs, landings, balconies and access platforms. 14 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 15 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : 16 Cement mortar 1:4 (1 cement : 4 coarse sand). 17 Cement Mortar 1:6 (1 Cement : 6 Coarse sand). 18 Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level. 19 Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) NALLAH. 20 Random Rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like: Cement mortar 1:6 (1 Cement : 6 coarse sand) NALLAH. 21 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid seperately): 22 First class deodar wood. 23 Second class deodar wood. 24 Sal wood. 25 Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position: Sal wood. 26 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 35 mm thick. First Class deodar wood. 27 Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of : (Note:- Butt hinges and necessary screws shall be paid separately). 12 mm thick pre-laminated particle board (decorative lamination on one side and other side balancing lamination) grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848 and prelaminated conforming to IS: 12823, Grade-I, Type-II marked : 28 Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in-charge (Frame work shall be paid for separately).12mm thick commercial ply conforming to S : 1328 BWR type. 29 Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws. 2nd class kail wood. 30 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. 31 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 32 Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10 mm. 33 Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm. 34 Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm. 35 Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate. 36 Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand). Light shade using white cement. 37 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm. 38 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown. 39 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 40 Mirror polishing on marble work/granite/stone work where ever required to give high gloss finish complete. 41 Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gram/m2. 42 Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gram/m2. 43 Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. 44 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand). 45 Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm). 46 Removing dry or oil bound distamper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 47 Removing white or colour wash by scraping and sand parering and preparing the surface wmooth including necessary repairs to scratches etc complete. 48 Providing and applying white cement based Putty of specified thickness, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick. 49 Applying a coat of water thinable cement primer of approved brand and manufacture on wall surface. 50 Wall painting with palstic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. 51 Finishing walls with Acrylic smooth exterior paint of required shade: Old work (two or more coats applied @ 1.67 litres/ 10sqm on existing cement paint surface). 52 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. 53 French spirit polishing, one or more coats on old work. 54 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work: 55 75 mm diameter pipes 56 100 mm diameter pipes 57 Finishing walls with water proofing cement paint of required shade: Old works (one or more coats applied @ 2.20 Kg/10 sqm) over priming coat of primer applied @ 0.80 leters/10sqm complete including cost of priming coat. 58 Appling priming coat:With ready mixed pnk or grey primer of approved brand and manufacturer on wood work (hard and soft wood). 59 White washing with lime to give an even shade: Old work (two or more coats). 60 Painting with aluminum paint of approved brand and manufacture to give an even shade, one or more coats on old work. 61 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade, one or more coats on old work. 62 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix). 63 Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment). 64 Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.) In rows 5 cm apart in either direction. 65 Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads & lifts. 66 Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work). 67 15 mm dia. nominal bore (Medium). 68 20 mm dia. nominal bore (Medium). 69 25 mm dia. nominal bore (Medium). 70 32mm dia nominal bore (medium). 71 40mm dia nominal bore (medium). 72 50mm dia nominal bore (medium). 73 80mm dia nominal bore (medium) 74 Supply of following GI accessories: 75 15 mm dia G.I. elbows. 76 20 mm dia G.I. elbows. 77 25 mm dia G.I. elbows. 78 15 mm G.I. Tee (equal). 79 20 mm G.I. Tee (equal). 80 25 mm G.I. Tee (equal). 81 15 mm nominal bore G.I. Unions. 82 20 mm nominal bore G.I. Unions. 83 25 mm nominal bore G.I. Unions. 84 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end). 85 25 mm nominal bore. 86 32 mm nominal bore. 87 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 88 15 mm nominal bore. 89 20 mm nominal bore. 90 25 mm nominal bore. 91 Providing UPVC pipe including jointing with seal ring (Finolex supreme): 92 uPVC pipes (working pressure 4 kg / cm2 ) Single socketed pipe 75 mm dia. 93 uPVC pipes (working pressure 4 kg / cm2 ) Single socketed pipe 100 mm dia. 94 Providing UPVC bend including jointing with seal ring (Finolex supreme): 95 UPVC bend 87.5° 75 mm bend. 96 UPVC bend 87.5° 110 mm bend. 97 Providing and fixing water closet squtting pan (Indian type WC pan) with 100 mm sand cast Iron P or S trap, 10 lit Low level PVC flushing cistern including flush pipe (of approved make) with manually, controlled device (handle lever) conforming to IS : 7231, with all fitings and fixtures complete, including cutting and making good the walls and floors wherever required. 98 White viterous china Orrisa patternW.C. pan of size 580x440 mm with integral type foot rests. 99 Providing and fixing white viterous china pedestals type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixture complete including cutting and making good the walls and floors wherever required. 100 W.C. pan with ISI marked with solid plastic seat and lid. 101 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 102 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and barrackets, cutting and marking good walls wherever required.White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. 103 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basinof 430x260x350 mm and 340x410x265mm sizes respectively. 104 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White. 105 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete. white solid plastic seat with lid. 106 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia. 107 Providing and fixing the following sanitary accessories. 108 Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931. 109 Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 110 Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931. 111 Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. 112 PTMT Soap dish / holder 138x102x75 mm. 113 PTMT - Towel Rail (450 mm long ). 114 Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour. 15 mm nominal bore with 45 cm length. 115 PTMT - Towel Ring 215x200x37 mm. 116 Providing and fixing PTMT Waste Coupling for wash basin and sink of approved quality and colour. 117 Waste coupling 38 mm of 83 mm length and 77 mm breadth weighing not less than 60 gms. 118 Providing and fixing P.V.C. waste pipe for sink or wash basin including waste fittings complete: Flexible pipe: 32 mm dia. 119 Providing and fixing toilet paper holder. C.P. brass. 120 Providing and fixing PTMT liquid soap container 109 mm wide 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 121 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. 122 Providing and fixing 600x450 mm beveled edge mirrior of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 123 Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes. 124 75 mm diametre. 125 100 mm diametre. 126 Providing and fixing on wall face un-plasticized - PVC moulded fittings / accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 127 Single tee without door : 75x75x75 mm. 128 Single tee without door : 110x110x110 mm. 129 Bend 87.5° : 75 mm bend. 130 Bend 87.5° : 110 mm bend. 131 Providing and fixing PPR Unions. 132 PPR Union 20mm. 133 PPR Union 25mm. 134 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing. 135 15mm nominal outer dia pipes. 136 20mm nominal outer dia pipes. 137 25mm nominal outer dia pipes. 138 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 139 15mm nominal outer dia pipes. 140 20mm nominal outer dia pipes. 141 25mm nominal outer dia pipes. 142 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. External work including trenching, refilling etc. 143 15mm nominal outer dia pipes. 144 20mm nominal outer dia pipes. 145 25mm nominal outer dia pipes. 146 Providing & fixing PTMT grating of approved quality and colour. Circular type. 147 100 mm nominal dia. 148 125 mm nominal dia. With 25 mm waste hole. 149 Dismantling tile work in floors/walls & roofs laid in cement mortar including stacking material within 50 meters lead.For thickness of tiles 10 mm to 25 mm. 150 Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.1:3:6 or richer mix (i/c equivalent design mix). 151 Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. 152 Demolishing brick work manually/by mechanical means includingstacking of serviceable material and disposal of unserviceable materialwithin 50 meters lead as per direction of Engineer-in-charge: In cement mortar. 153 Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. 154 Dismantling of flushing cistern of all types (C.I/ PVC/ Vitreous china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 meters lead 155 Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shape wherever required. 156 Supply of labour for repair works at different locations within project area. 157 Mazdoor/ labour/Helper 158 Sweeper 159 Sewer man/Mali 160 Plumber 161 Electrican 162 Carpenter 1st class 163 Mason 164 Welder 165 Driver 166 Carriage of materials by Mechanical Transport including loading, unloading and stacking at site. 167 Cement average distance 7 km. 168 Sand average distance 10 km. 169 Aggregate 20 mm average distance 10 km. 170 Aggregate 40 mm average distance 10 km. 171 Soling stones average distance 10 km. 172 Moorum, building rubbish average distance 15 km. 173 Bricks average distance 15 km. 174 Steel average distance 7 km. 175 Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.Group A: 176 Wiring for light/power plug with 2X4 sq. mm. FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit along with 1 No 4 sq.mm. FR PVC insulated copper conductor single core cable for loop earthing as required. 177 Wiring for light/power plug with 4X4 sq.mm. FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 2 Nos. 4 sq.mm. FR PVC Insulted copper conductor single core cable for loop earthing as required. 178 Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. 179 Supply of following items of standard quality like havels/ anchor or equivalentwith ISI mark. 180 1.5 sqmm ISI marked, FRLS PVC insulated, single core copper conductor cable. 181 2.5 sqmm ISI marked, FRLS PVC insulated, single core copper conductor cable. 182 4.0 sqmm ISI marked, FRLS PVC insulated, single core copper conductor cable. 183 10 sqmm ISI marked, FRLS PVC insulated, single core copper conductor cable. 184 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air deliveryminimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019),THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 185 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 186 5/6 A switch. 187 2 way 5/6 A switch 188 15/16 A switch. 189 3 pin 5/6 A socket outlet. 190 6 pin 15/16 A socket outlet. 191 6 pin 15/16 A socket outlet. 192 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 193 Supply of following MCB: 194 2+2 way, SPN, single door, MCB DB. 195 2+4 way, SPN, single door, MCB DB. 196 2+6 way, SPN, single door, MCB DB. 197 2+10 way, SPN, single door, MCB DB. 198 6 way, SPN, double door, MCB DB.
