Tender For Dynamic Façade Light In Sampurnan And Sanskrit University District-Varanasi(Notice No. -34/Uppcl/Gm-1/2025-26/E-Tenderdated: 07.05.2025) - Dynamic Façade Light in Sampurnanand Sanskrit University District-Varanasi 2 Supply, Installation, Testing and Commissioning of 24VDC operated RGBW LED linear grazer of 600mm (± 10%) length made of extruded aluminium with die cast aluminium end cap, system wattage in the range of 20-25 Watt having lumen efficacy of 50 lm/W (± 5%) with all channel ON and SDCM ≤5 for white LED. Luminaire should be capable of producing dynamic color changing light by DMX/Ethernet based control. Luminaire can be tilted ±70°. Luminaire shuld have a choice of architectural floodlighting optics with asymmetric beam angles of 15-18° x 30-55°. Lifeclass should be at least 50,000 burning hours at L70@25deg C. LED make shall be CREE/NICHIA/OSRAM/LUMILEDS only. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16 million plus colours. Lens should be anti ageing and anti-UV high optical efficiency PMMA lenses covered with clear tempered glass. Luminaire should comply IP66 and Mechanical Impact of IK07. The fixtures shall be have Quick installation and self-locking waterproof connectors on all data lines and DC line. Luminairies should have Coastal Environment protection and vibration tested. Operating temperature should be in the range of -30degC to 50deg C. Luminaire and DMX controller should be of same make. Complete in all respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handiling, Loading/unloading, security, upkeep and operation & maintenance for 5 yearsincluding replacement, rectification, programming of faulty luminaires etc.Make: Regarding Brand/ Makes The offered product (Technical specification mention in BOQ) should be of Indian make: Philips/Havells/Crompton/Wipro/Equivalent Etc. , European, Australian, American or any other region subject to GFR 144, of government of India.The cost is inlcusive of preparation of Shop drawing for the fixture location and its approval based on the idea communicated by Engineer Incharge of Department/Architect . The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by EngineerIncharge of Department/Architect.Test Reports to be provided by successfull bidder after the release of work order: LM 80, TM 21, Photobiological safety report, Thermal test report, vibration test report, BIS certificate for drivers and luminaires. Only LM 79 (from NABL accrediated lab) can be provided at the time of supply. 3 Supply, Installation, Testing and Commissioning of 24VDC operated RGBW LED linear grazer of 900mm (± 10%) length made of extruded aluminium with die cast aluminium end cap, system wattage in the range of 35-40 Watts having lumen efficacy of 50 lm/W (± 5%) with all channel ON and SDCM ≤5 for white LED. Luminaire should be capable of producing dynamic color changing light by DMX/Ethernet based control. Luminaire can be tilted ±70°. Luminaire shuld have a choice of architectural floodlighting optics with asymmetric beam angles of 15-18° x 30-55°. Lifeclass should be at least 50,000 burning hours at L70@25deg C. LED make shall be CREE/NICHIA/OSRAM/LUMILEDS only. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16 million plus colours. Lens should be anti ageing and anti-UV high optical efficiency PMMA lenses covered with clear tempered glass. Luminaire should comply IP66 and Mechanical Impact of IK07. The fixtures shall be have Quick installation and self-locking waterproof connectors on all data lines and DC line. Luminairies should have Coastal Environment protection and vibration tested. Operating temperature should be in the range of -30degC to 50deg C. Luminaire and DMX controller should be of same make. Complete in all respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handiling, Loading/unloading, security, upkeep and operation & maintenance for 5 yearsincluding replacement, rectification, programming of faulty luminaires etc.Make: Regarding Brand/ Makes The offered product (Technical specification mention in BOQ) should be of Indian make: Philips/Havells/Crompton/Wipro/Equivalent Etc. , European, Australian, American or any other region subject to GFR 144, of government of India.The cost is inlcusive of preparation of Shop drawing for the fixture location and its approval based on the idea communicated by Engineer Incharge of Department/Architect . The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by EngineerIncharge of Department/Architect.Test Reports to be provided by successfull bidder after the release of work order: LM 80, TM 21, Photobiological safety report, Thermal test report, vibration test report, BIS certificate for drivers and luminaires. Only LM 79 (from NABL accrediated lab) can be provided at the time of supply. 4 Supply, Installation, Testing and Commissioning of 24VDC operated RGBW LED linear grazer of 900mm (± 10%) length made of extruded aluminium with die cast aluminium end cap, system wattage in the range of 20-25 Watts having lumen efficacy of 50 lm/W (± 5%) with all channel ON and SDCM ≤5 for white LED. Luminaire should be capable of producing dynamic color changing light by DMX/Ethernet based control. Luminaire can be tilted ±70°. Luminaire shuld have a choice of architectural floodlighting optics with asymmetric beam angles of 25° / 35° / 20° x 45° (± 10%). Lifeclass should be at least 50,000 burning hours at L70@25deg C. LED make shall be CREE/NICHIA/OSRAM/LUMILEDS only. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16 million plus colours. Lens should be anti ageing and anti-UV high optical efficiency PMMA lenses covered with clear tempered glass. Luminaire should comply IP66 and Mechanical Impact of IK07. The fixtures shall be have Quick installation and self-locking waterproof connectors on all data lines and DC line. Luminairies should have Coastal Environment protection andvibration tested. Operating temperature should be in the range of -30degC to 50deg C. Luminaire and DMX controller should be of same make. Complete in all respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handiling, Loading/unloading, security, upkeep and operation & maintenance for 5 yearsincluding replacement, rectification, programming of faulty luminaires etc.Make: Regarding Brand/ Makes The offered product (Technical specification mention in BOQ) should be of Indian make: Philips/Havells/Crompton/Wipro/Equivalent Etc. , European, Australian, American or any other region subject to GFR 144, of government of India.The cost is inlcusive of preparation of Shop drawing for the fixture location and its approval based on the idea communicated by Engineer Incharge of Department/Architect . The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by EngineerIncharge of Department/Architect.Test Reports to be provided by successfull bidder after the release of work order: LM 80, TM 21, Photobiological safety report, Thermal test report, vibration test report, BIS certificate for drivers and luminaires. Only LM 79 (from NABL accrediated lab) can be provided at the time of supply. 5 Supply, Installation, Testing and Commissioning of 24VDC operated RGBW LED linear grazer of 900mm (± 10%) length made of extruded aluminium with die cast aluminium end cap, system wattage in the range of 45-50 Watts having lumen efficacy of 50 lm/W (± 5%) with all channel ON and SDCM ≤5 for white LED. Luminaire should be capable of producing dynamic color changing light by DMX/Ethernet based control. Luminaire can be tilted ±70°. Luminaire shuld have a choice of architectural floodlighting optics with asymmetric beam angles of 12°, 30°, 45°, 55°, 15°X30°, 15°X55° (± 10%). Lifeclass should be at least 50,000 burning hours at L70@25deg C. LED make shall be CREE/NICHIA/OSRAM/LUMILEDS only. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16 million plus colours. Lens should be anti ageing and anti-UV high optical efficiency PMMA lenses covered with clear tempered glass. Luminaire should comply IP66 and Mechanical Impact of IK07. The fixtures shall be have Quick installation and self-locking waterproof connectors on all data lines and DC line. Luminairies should have Coastal Environment protection and vibration tested. Operating temperature should be in the range of -30degC to 50deg C. Luminaire and DMX controller should be of same make. Complete in all respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handiling, Loading/unloading, security, upkeep and operation & maintenance for 5 yearsincluding replacement, rectification, programming of faulty luminaires etc.Make: Regarding Brand/ Makes The offered product (Technical specification mention in BOQ) should be of Indian make: Philips/Havells/Crompton/Wipro/Equivalent Etc. , European, Australian, American or any other region subject to GFR 144, of government of India.The cost is inlcusive of preparation of Shop drawing for the fixture location and its approval based on the idea communicated by Engineer Incharge of Department/Architect . The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by EngineerIncharge of Department/Architect.Test Reports to be provided by successfull bidder after the release of work order: LM 80, TM 21, Photobiological safety report, Thermal test report, vibration test report, BIS certificate for drivers and luminaires. Only LM 79 (from NABL accrediated lab) can be provided at the time of supply. 6 Supply, Installation, Testing and Commissioning of 24VDC operated RGBW LED floodlight made of die cast aluminium , system wattage in the range of 20-25 Watts having lumen efficacy of 55 lm/W (± 5%) with all channel ON and SDCM ≤5 for white LED. Luminaire should be capable of producing dynamic color changing light by DMX/Ethernet based control. Luminaire can be tilted ±90°. Luminaire shuld have a choice of architectural floodlighting optics with asymmetric beam angles of 12°, 25°, 30°, 45°, 60°, 20°X55° (± 10%). Lifeclass should be at least 50,000 burning hours at L70@25deg C. LED make shall be CREE/NICHIA/OSRAM/LUMILEDS only. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16 million plus colours. Lens should be anti ageing and anti-UV high optical efficiency PMMA lenses covered with clear tempered glass. Luminaire should comply IP66 and Mechanical Impact of IK07. The fixtures shall be have Quick installation and self-locking waterproof connectors on all data lines and DC line. Luminairies should have Coastal Environment protection and vibration tested. Operating temperature should be in the range of -30degC to 50deg C. Luminaire and DMX controller should be of same make. Complete in all respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handiling, Loading/unloading, security, upkeep and operation & maintenance for 5 yearsincluding replacement, rectification, programming of faulty luminaires etc.Make: Regarding Brand/ Makes The offered product (Technical specification mention in BOQ) should be of Indian make: Philips/Havells/Crompton/Wipro/Equivalent Etc. , European, Australian, American or any other region subject to GFR 144, of government of India.The cost is inlcusive of preparation of Shop drawing for the fixture location and its approval based on the idea communicated by Engineer Incharge of Department/Architect . The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by EngineerIncharge of Department/Architect.Test Reports to be provided by successfull bidder after the release of work order: LM 80, TM 21, Photobiological safety report, Thermal test report, vibration test report, BIS certificate for drivers and luminaires. Only LM 79 (from NABL accrediated lab) can be provided at the time of supply. 7 Supply, Installation, Testing and Commissioning of 24VDC operated RGBW LED floodlight made of die cast aluminium , system wattage in the range of 24-30 Watts having lumen efficacy of 55 lm/W (± 5%) with all channel ON and SDCM ≤5 for white LED. Luminaire should be capable of producing dynamic color changing light by DMX/Ethernet based control. Luminaire can be tilted ±90°. Luminaire shuld have a choice of architectural floodlighting optics with asymmetric beam angles of 12°, 25°, 30°, 45°, 60°, 20°X55° (± 10%). Lifeclass should be at least 50,000 burning hours at L70@25deg C. LED make shall be CREE/NICHIA/OSRAM/LUMILEDS only. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16 million plus colours. Lens should be anti ageing and anti-UV high optical efficiency PMMA lenses covered with clear tempered glass. Luminaire should comply IP66 and Mechanical Impact of IK07. The fixtures shall be have Quick installation and self-locking waterproof connectors on all data lines and DC line. Luminairies should have Coastal Environment protection and vibration tested. Operating temperature should be in the range of -30degC to 50deg C. Luminaire and DMX controller should be of same make. Complete in all respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handiling, Loading/unloading, security, upkeep and operation & maintenance for 5 yearsincluding replacement, rectification, programming of faulty luminaires etc.Make: Regarding Brand/ Makes The offered product (Technical specification mention in BOQ) should be of Indian make: Philips/Havells/Crompton/Wipro/Equivalent Etc. , European, Australian, American or any other region subject to GFR 144, of government of India.The cost is inlcusive of preparation of Shop drawing for the fixture location and its approval based on the idea communicated by Engineer Incharge of Department/Architect . The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by EngineerIncharge of Department/Architect.Test Reports to be provided by successfull bidder after the release of work order: LM 80, TM 21, Photobiological safety report, Thermal test report, vibration test report, BIS certificate for drivers and luminaires. Only LM 79 (from NABL accrediated lab) can be provided at the time of supply. 8 Supply, Installation, Testing and Commissioning of 220V-240VAC operated RGBW LED floodlight made of die cast aluminium , system wattage in the range of 45-50 Watts having lumen efficacy of 55 lm/W (± 5%) with all channel ON and SDCM ≤5 for white LED. Luminaire should be capable of producing dynamic color changing light by DMX/Ethernet based control. Luminaire can be tilted ±90°. Luminaire shuld have a choice of architectural floodlighting optics with asymmetric beam angles of 12°, 25°, 30°, 45°, 60°, 20°X55° (± 10%). Lifeclass should be at least 50,000 burning hours at L70@25deg C. LED make shall be CREE/NICHIA/OSRAM/LUMILEDS only. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16 million plus colours. Lens should be anti ageing and anti-UV high optical efficiency PMMA lenses covered with clear tempered glass. Luminaire should comply IP66 and Mechanical Impact of IK07. The fixtures shall be have Quick installation and self-locking waterproof connectors on all data lines and DC line. Luminairies should have Coastal Environment protection and vibration tested. Operating temperature should be in the range of -30degC to 50deg C. Luminaire and DMX controller should be of same make. Complete in all respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handiling, Loading/unloading, security, upkeep and operation & maintenance for 5 yearsincluding replacement, rectification, programming of faulty luminaires etc.Make:Regarding Brand/ Makes The offered product (Technical specification mention in BOQ) should be of Indian make: Philips/Havells/Crompton/Wipro/Equivalent Etc. , European, Australian, American or any other region subject to GFR 144, of government of India.The cost is inlcusive of preparation of Shop drawing for the fixture location and its approval based on the idea communicated by Engineer Incharge of Department/Architect . The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by EngineerIncharge of Department/Architect.Test Reports to be provided by successfull bidder after the release of work order: LM 80, TM 21, Photobiological safety report, Thermal test report, vibration test report, BIS certificate for drivers and luminaires. Only LM 79 (from NABL accrediated lab) can be provided at the time of supply.. 9 Supply, Installation, Testing and Commissioning of 220V-240VAC operated RGBW LED floodlight made of die cast aluminium , system wattage in the range of 50-60 Watts having lumen efficacy of 55 lm/W (± 5%) with all channel ON and SDCM ≤5 for white LED. Luminaire should be capable of producing dynamic color changing light by DMX/Ethernet based control. Luminaire can be tilted ±90°. Luminaire shuld have a choice of architectural floodlighting optics with asymmetric beam angles of 12°, 25°, 30°, 45°, 60°, 20°X55° (± 10%). Lifeclass should be at least 50,000 burning hours at L70@25deg C. LED make shall be CREE/NICHIA/OSRAM/LUMILEDS only. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16 million plus colours. Lens should be anti ageing and anti-UV high optical efficiency PMMA lenses covered with clear tempered glass. Luminaire should comply IP66 and Mechanical Impact of IK07. The fixtures shall be have Quick installation and self-locking waterproof connectors on all data lines and DC line. Luminairies should have Coastal Environment protection andvibration tested. Operating temperature should be in the range of -30degC to 50deg C. Luminaire and DMX controller should be of same make. Complete in all respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handiling, Loading/unloading, security, upkeep and operation & maintenance for 5 yearsincluding replacement, rectification, programming of faulty luminaires etc.Make: Regarding Brand/ Makes The offered product (Technical specification mention in BOQ) should be of Indian make: Philips/Havells/Crompton/Wipro/Equivalent Etc. , European, Australian, American or any other region subject to GFR 144, of government of India.The cost is inlcusive of preparation of Shop drawing for the fixture location and its approval based on the idea communicated by Engineer Incharge of Department/Architect . The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by EngineerIncharge of Department/Architect.Test Reports to be provided by successfull bidder after the release of work order: LM 80, TM 21, Photobiological safety report, Thermal test report, vibration test report, BIS certificate for drivers and luminaires. Only LM 79 (from NABL accrediated lab) can be provided at the time of supply. 10 Supply, Installation, Testing and Commissioning of 220V-240VAC operated RGBW LED floodlight made of die cast aluminium , system wattage in the range of 150-180 Watts having lumen efficacy of 55 lm/W (± 5%) with all channel ON and SDCM ≤5 for white LED. Luminaire should be capable of producing dynamic color changing light by DMX/Ethernet based control. Luminaire can be tilted ±90°. Luminaire shuld have a choice of architectural floodlighting optics with asymmetric beam angles of 12°, 25°, 30°, 45°, 60°, 20°X55° (± 10%). Lifeclass should be at least 50,000 burning hours at L70@25deg C. LED make shall be CREE/NICHIA/OSRAM/LUMILEDS only. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16 million plus colours. Lens should be anti ageing and anti-UV high optical efficiency PMMA lenses covered with clear tempered glass. Luminaire should comply IP66 and Mechanical Impact of IK07. The fixtures shall be have Quick installation and self-locking waterproof connectors on all data lines and DC line. Luminairies should have Coastal Environment protectionand vibration tested. Operating temperature should be in the range of -30degC to 50deg C. Luminaire and DMX controller should be of same make. Complete in all respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handiling, Loading/unloading, security, upkeep and operation & maintenance for 5 yearsincluding replacement, rectification, programming of faulty luminaires etc.Make: Regarding Brand/ Makes The offered product (Technical specification mention in BOQ) should be of Indian make: Philips/Havells/Crompton/Wipro/Equivalent Etc. , European, Australian, American or any other region subject to GFR 144, of government of India.The cost is inlcusive of preparation of Shop drawing for the fixture location and its approval based on the idea communicated by Engineer Incharge of Department/Architect . The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by EngineerIncharge of Department/Architect.Test Reports to be provided by successfull bidder after the release of work order: LM 80, TM 21, Photobiological safety report, Thermal test report, vibration test report, BIS certificate for drivers and luminaires. Only LM 79 (from NABL accrediated lab) can be provided at the time of supply. 11 Supply, Installation, Testing and Commissioning of 2700K/3000K LED non-integral IP67flexible silicon extruded strip luminaire of 5m length with system wattage in the range of 10-13W/m having lumen efficacy not less than 80 lm/W and CRI of 80 with SDCM ≤5, diffused optics and beam angle 120deg and Lumen maintenance should be at least 50,000 burning hours at L70@25deg C. Size of luminaire should be 16mm x 15mm with various mounting channel. Luminaire should have dimming compatibility with protocol DALI, PWM, 0-10V, 1-10V, DMX2PWM Dimmer, Radio Frequency. Operating temperature should be in the range of -30degC to 50deg C. Complete in all respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handiling, Loading/unloading, security, upkeep and operation & maintenance for 5 years including replacement, rectification, programming of faulty luminaires etc.Make: Regarding Brand/ Makes The offered product (Technical specification mention in BOQ) should be of Indian make: Philips/Havells/Crompton/Wipro/Equivalent Etc. , European, Australian, American or any other region subject to GFR 144, of government of India.The cost is inlcusive of preparation of Shop drawing for the fixture location and its approval based on the idea communicated by Engineer Incharge of Department/Architect . The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by EngineerIncharge of Department/Architect.Test Reports to be provided by successfull bidder after the release of work order: LM 80, TM 21, Photobiological safety report, Thermal test report, vibration test report, BIS certificate for drivers and luminaires. Only LM 79 (from NABL accrediated lab) can be provided at the time of supply. 12 SITC of master controller (DMX controller along with slaves) with capability to control minimum 10 DMX512 universes, playback scenes and animations stored in its SD card, and it can be used for offline scenes scheduling, setting brightness, white balance and playback speed adjustments. It should be able to amplify the DMX signal in cascaded connection & support automatic playback scheduling. It should support power-on startup and scheduled timing start along with capability of unattended operation and remote scene triggering if needed. Master controller shall be supplied with 8inch touch screen for controlling the scenes manually. The Input voltage shall be 24V-48VDC & shall have RJ45 ports on Input side. It should operate on DM512 protocol. The master controller power consumption shall be 12W (±10%). The Content Program Controller shall have one SD card slot for maximum 32GB card & the SD card being used shall be FAT32 format. The Content Program Controller shall come with 220-240V to 24V DC power supply. The IP rating of content program controller shall be IP20 & shall comply to CE, RoHS, FCC, UKCA, ETL certifications. The DMX controller/content program controller shall be from the same make/brand/manufacturer as that of façade lighting luminaires. The working temperature range shall be -20°C to +40°C. The successful bidder shall submit the technical data sheet for approval before supply of material.Make: Regarding Brand/ Makes The offered product (Technical specification mention in BOQ) should be of Indian make: Philips/Havells/Crompton/Wipro/Equivalent Etc. , European, Australian, American or any other region subject to GFR 144, of government of India.Product datasheets of quoted item model shall be provided by bidder/OEM at the time of bidding and same datasheet and IES files shall be available to download from brand’s website, even if it is customised items.The cost is inlcusive of preparation of Shop drawing for the fixture location and its approval based on the idea communicated by Architect in charge. The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by Architect in charge/Engineer Incharge of Department 13 Planning, Designing, Programming of all the light fixtures with integration into controller and making multiple, programming in total of 5 different occasion. Synchronizing all fixtures into one.The bidder is expected to prepare simulations for each occasion in Visualisations, 3D walkthrough with atleast 3 varied options for all 5 occasions as per the idea communicated by Architect in charge and Facade Consultant in charge.Synchronizing all fixtures into one.The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by Architect in charge/Engineer Incharge of Department 14 SITC and fixing of RDM-6 Wall DMX Splitter & Booster is a 6-output DMX/RDM splitter with DMX/RDM, passthrough supporting bi-directional communications Input power DC 12-24V input, 100-240V, 24VDC plug-in power adaptor included power consumption 4.5W max, housing made of polycarbonate, surface mount or DIN-rail mountable, operation temperature 10C- +35C, output six 3- pin terminal socket, connection two piece compression screw terminal, protection Rating IP20, Interior application. The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by Architect in charge/Engineer in charge of Department 15 Supply, Installation, Testing and Commissioning ofDMX Addressing required for programming, addressing of the fixtures. The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by Engineer Incharge of Department/ Architect in charge 16 Supply installation commissioning of following sizes of power and data cable as mentioned: 3 x 2.5 sqmm Cu unarmored multistrand 17 3 x 4 sqmm Cu unarmored multistrand 18 5 x 6 sqmm Cu unarmored multistrand 19 4 x 16 sqmm Al armoured 20 3.5 x 95 sqmm Al amrd 21 Data cable Cat 6 22 Supply installation commissioning of following sizes PVC Codute Pipe25MM 23 Supply installation commissioning of following sizes PVC Codute Pipe 32MM 24 Supply installation commissioning of Corrigoted flexible Pipe 25 mm- 40mm for jointing of turnings. 25 Supply installation commissioning of 2.5-3.5 OD DWC Pipe 26 IP-67/68 2way/3Way Junction Box for Fixture connection 27 Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. 28 Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity 29 Supply, installation, testing and commissioning of cages for protection of light fixtures of suitable size made of MS grade having wire meshwith spacing of 1.5 - 2 inches and sturdy to avoid ohysical damage with base frame being made of thick strip. 30 Supply, installation, testing and commissioning of Electrical panel with Servo Bypass swith on incomer having63 A MCCB with Surge Protection Device for all phases with minimum 6 No outgoing of 6 A DP MCCBA compartment having two switches for safekeeping the controller and other necessary equipments 31 Supply, installation, testing and commissioning of Oil Cooled Servo Stabilizer of 75 KVA Three Phase with Enclosure and connection to the main panel. with rating of 180-250 V stabilizong and maintaining a fixed voltage output of 220Volt for the entire system. 32 Supplying, fabricating, transporting, hoisting and fixing in position good quality of approved thickness Ornamental Stone (Mirzapur Pink/ Yellow or as found on site and approved by Architect in charge) in various elements for all levels. Stone shall be free from cracks, lines stains and even in shade for each element. The stone shall be fine grained and reddish or buff-colored (locally available). The work shall be carried out as per attached drawings with different process of i.e carving (manual/ by machine), ornamental work, traditional work, figure work (any type, any size), CNC cutting, moulding. The carving and molding work shall be of very good quality. The stones to be fixed in line, level and plumb in all respect with the use of brass clamps, pins, (to be paid separetely) dowels, cement slurry with matching pigment and Epoxy of Akemi Germany, Ardex Endura, MYK laticrete or approved make as required and as approved by the Architects. The cost is inclusive of preparation of shop drawing as per the design and idea approved by the Architect in charge and sample preparation and approval from the Architect in charge. 33 GST Extra as applicable
