Tender For Kamla Bahuguna Market Main Road To Chandra Gas Service Work Of Cc Road And Railings. - Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. i/c welding, griding, buffing, polishing and making curvature (wherever required) and fiffing the same with necessary stainless steel nuts and bolts compl 2 Excavation in foundation in ordinary soil (loam clay or sand ) includig lift upto 1.50 metre and lead upto 30 metre . Including filling watering & ramming of excavated earth into the trenches of into the space between the building & the sides of foundatio 3 Concrete with 40mn gauge B/B, fine sand of 1.25 FM and Cement in proportion of 12:6:1 including supplyof all materials, labour and T&P etc. required for proper completion of the work. SI.N0.273 4 M-150 Brick work in 1:4 cement & fine sand (1.25 F.M.) mortar morter in foundation and plinth including supply of all materials, labour & tools & plants etc. required for proper completion of the work. Excluding GST. SI No. 305 5 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kN static roller in stages to proper grade and cam 6 Costruction of un-reinforce and Expansion joint construction joint only PCC pavement thickness as per design over a pre[paired subbase with 43 grade cement or any other type as clause 1501.2.2 M-30 grade coarse sand and fine aggregate confirming to IS 383 7 Provoiding and Laying of 2.50 cm thick PCC 1:2:4 (Without Base Concrete) With cement coarse sand and 20 mm gauge stone grit incluidng all. As per PWD Allahabad SOR SI. No. 601A 8 12mm thickplaster with 1:4 cement and find sand morter over brick or stone masonry workincludingsupply of all materials, labour ,T&P etc. required for proper completion of the work . Exculding GST. As per S.I. No. 597© 9 R.C.C work with with cement approved course sand and 2 cm approved stone grit in praportion of 1:1.5:3 in SLAB excluding supply of renforcement and its bending but including its fixing and binding the same with 24B.W.G.G.I. binding wire including necess 10 M.S. (tor steel or plain) in plain work such as Rcc or R.B. work including supply of steel & its wastage bend, hooks and authorised overlapping shall be measured and including cost of binding wire. Exculding GST. SI No. 504 11 Providingandfixing18mmthickGranite(gangsaw cut) mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, windowsills,faciasandsimilarlocations,ofrequired size,approvedshade,colourandtexturelaidover20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand),jointstreatedwith whitecement,mixedwith matching pigment, epoxy touch ups, including rubbing,curing,mouldingandpolishingtoedgesto givehighglossfinishetc.completeatalllevels. Granite stone slab of colour black, Cherry/Ruby red. (Slab area above 0.50 Sq.M.) As per SI no- 8.2.2.2 12 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. As per DSR Code No.8.31 13 Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) As per Code No-13.46.1 Two Coats 14 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle ironand 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, i/c applying a priming coat of approved steel primer. Using flats 36x6 mm for d 15 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shadeas per DSR Code 13.62 13.62.1two or more coats on new work over an under coat coatof suitable shade 16 boring with submersible pumpSupply and fixing of Submercible pump 17 6inch cpvc pipe chno 211 n0 108 18 P/F 2 GI pipe (b) class ch no 211 no 6 19 Nylon mess for filter 20 plastic dori 21 solvent cement 22 6 end cap 23 6 submersible cap 24 2 MS clamp 25 2 GI elbow 26 2*-6 GI nipple 27 2.50 sqm submercible cable 28 Drilling charge for 6 dia tubewell 29 pea gravel 30 2 ms socket 31 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the 32 Supplying and fixing brass batten/ angle holder including connection etc. as required. DSR-22 E&M Code no. 1.34 33 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole. DSR-2 34 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire. DSR-22 E&M Co 35 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. DSR-22 E&M Code no. 1.31 36 Providing & fixing PVC pipes conforming to IS make workinh pressure 6 Kg/cm² including testing, labour, T&P and all complete fittings. 110mm dia As per Code No.12.41.2 37 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, 38 Providing & fixing PVC pipes conforming to IS make workinh pressure 6 Kg/cm² including testing, labour, T&P and all complete fittings. 75mm dia As per Code No.12.41.1 39 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes 40 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes 41 Providing & fixing CP brass bib cock of approved quality conforming to IS 8931(a) 15mm nominal bore As per DSRCode No.18.49.1 42 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require . (a)White Vitreous China Flat 43 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. Semi rigid pipe(a) 32mm dia As per DSRCode No.17.28.1.1 44 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. As per DSR Code No. 17.23 45 Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and t 46 Suppply and fixing of sign board I/Call. 47 As per order of Joint Secretary G.O. No.G-1877 Dated 21-02-2025 and Director cum chief Engineer U.P.RED Lucknow Letter no. 801 dated 03-03-2025 Deduction 5% for Competitive Price Efficiency
