Tender For Miscellaneous Civil Work Such As Aluminum Partition , Internal Painting Etec In Csc Room In Te Campus At North Gate Under Tripura Ba, Tripura-Tripura

Miscellaneous civil work such as Aluminum Partition , internal painting etec in CSC room in TE campus at North Gate under Tripura BA; 1 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 2 Cement mortar 1:4 (1 cement :4 coarse sand) 3 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 4 Fixed to openings /wooden frames with rawl plugs screws etc. 5 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 6 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 7 250x16 mm 8 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 9 250x10 mm 10 Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 11 125 mm 12 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 13 For fixed portion 14 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 15 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). 16 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 17 Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 18 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. 19 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 20 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) 21 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 22 Upto 5mm depth and 5 mm width 23 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 24 12 mm cement plaster of mix : 25 1:6 (1 cement: 6 fine sand) 26 15 mm cement plaster on the rough side of single or half brick wall of mix : 27 1:6 (1 cement: 6 fine sand) 28 12 mm cement plaster finished with a floating coat of neat cement of mix : 29 1:4 (1 cement: 4 fine sand) 30 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. 31 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 32 Two or more coats on new work. 33 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 34 Two coats.

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	02-07-2025	MODIFICATION IN DATE IN THE NIT	Date	02-07-2025

INR 590 /-

INR 2.87 Lakhs /-