Bids Are invited for 1 Supplying, Installing, Testing and Commissioning of Inverter Split Air Conditioning Unit of 1.0 TR Capacity suitable for operation on 230V, 50Hz, single phase AC supply, comprising indoor and outdoor units, pre-charged with eco-friendly green refrigerant R-32, with following features: Inverter compressor technology for high energy efficiency 3-Star rated as per latest BEE norms Anti-Corrosive Blue Fins on condenser and evaporator coil for protection against corrosion Wide louvre movement ensuring uniform air distribution 5-in-1 Convertible Mode for adjustable cooling performance Turbo Cool function for quick cooling operation 100% Copper Condenser and connecting pipe Inclusive of 3 Mtr Copper Refrigerant Piping, Power Cable Complete with MS powder-coated Outdoor Unit Stand, 4 KVA Voltage Stabilizer, and other necessary supports/accessories The unit shall carry 1-year comprehensive warranty and additional 9-year warranty on compresso Including all accessories, tools, labor, material, transportation, installation, and commissioning at site as directed by Engineer-in-Charge Pieces 2 Supplying, Installing, Testing and Commissioning of Inverter Split Air Conditioning Unit of 1.5 TR Capacity suitable for operation on 230V, 50Hz, single phase AC supply, comprising indoor and outdoor units, pre-charged with eco-friendly green refrigerant R-32, with following features: Inverter compressor technology for high energy efficiency 3-Star rated as per latest BEE norms Anti-Corrosive Blue Fins on condenser and evaporator coil for protection against corrosion Wide louvre movement ensuring uniform air distribution 5-in-1 Convertible Mode for adjustable cooling performance Turbo Cool function for quick cooling operation 100% Copper Condenser and connecting pipe Inclusive of 3 Mtr Copper Refrigerant Piping, Power Cable Complete with MS powder-coated Outdoor Unit Stand, 4 KVA Voltage Stabilizer, and other necessary supports/accessories The unit shall carry 1-year comprehensive warranty and additional 9-year warranty on compressor Including all accessories, tools, labor, material, transportation, installation, and commissioning at site as directed by Engineer-in-Charge Pieces 3 Supplying, Installing, Testing and Commissioning of Inverter Cassette Type Air Conditioning Unit of 4.0 TR Capacity suitable for operation on 230V, 50Hz, single phase A.C. supply, comprising indoor unit with decorative panel and outdoor condensing unit factory charged with eco-friendly green refrigerant R-32, complete in all respects with the following specifications: High energy efficient Inverter Compressor2-Star rated as per latest BEE guidelines 100% Copper Condenser Coil for long life and efficient heat transfer Anti-corrosive Blue Fin coating on condenser coil for enhanced protection Supplied with 3.0 Rmt copper refrigerant piping, insulation, drain piping, power cable, and all necessary interconnections MS powder-coated Outdoor Unit Stand for wall/floor mounting Unit shall be supplied with all standard accessories, including hanging rods, vibration isolation pads, fasteners, etcThe unit shall carry a 1-year comprehensive warranty and additional 4 years warranty on compressor The scope includes transportation, installation, testing, commissioning and handing over in working condition at site as directed by Engineer-in-Charge Pieces 4 Supplying & placing in High Back Chair Seat / Back Assembly :- The seat and back are made up of 1.2 + / - 0.1 cm thick hot –pressed plywood measured as per QA method described in OCP-QLTA-PA 14-18 and upholstered with fabric upholstery covers and moulded polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area.The chair is available in three models:- High Back Size :- 47.5 cm (W) x 69.5 cm (H), Seat Size :- 47.0 cm (W) x 48.0 cm (D) High Resilience (HR) Polyurethane Foam: - The HR polyurethane foam is moulded with density = 45+ /- kg/m3 and hardness load 16 + /- kgf as per IS: 7888 for 25% compression. Armrests: - The one Piece armrest are injection moulded from black Co-polymer Polypropylene. Centre Tilt Synchro Mechanism: - The mechanism is designed with following feature:- 360 revolving type, Upright position locking, Tilt tension adjustment, Seat / Back tilting ratio of 1:3. Tubular Frame: - The powder coated (DFT 40-60 microns) tubular frame is cantilever type & made of 0 2.54 + / - 0.03 cm x 0.2 +/- 0.016 cm thk. M.S. ERW Tube. Pneumatic Height Adjustment: - The pneumatic height adjustment has an adjustment stroke of 12.0 + / - cm. Telescopic bellow Assembly:- The bellow is 3 piece telescopic type and injection moulded in black polypropylene. Pedestal Assembly:- The pedestal is injection moulded in black 33% glass-filled Nylon – 66 and fitted with 5 nos. twin wheel castors. The pedestal is 66.3 + /- 0.5 cm. Twin Wheel Castors:- The twin wheel castors are injection moulded in Black Nylon. Pieces 5 Supplying & placing in Mid Back Chair Seat / Back Assembly :- The seat and back are made up of 1.2 + / - 0.1 cm thick hot –pressed plywood measured as per QA method described in OCP-QLTA-PA 14-18 and upholstered with fabric upholstery covers and moulded polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area.The chair is available in three models:- Mid Back Size 47.5 cm (W) x 58.0 cm (H) Seat Size :- 47.0 cm (W) x 48.0 cm (D) High Resilience (HR) Polyurethane Foam: - The HR polyurethane foam is moulded with density = 45+ /- kg/m3 and hardness load 16 + /- kgf as per IS: 7888 for 25% compression. Armrests: - The one Piece armrest are injection moulded from black Co-polymer Polypropylene. Centre Tilt Synchro Mechanism: - The mechanism is designed with following feature:- 360 revolving type, Upright position locking, Tilt tension adjustment, Seat / Back tilting ratio of 1:3. Tubular Frame: - The powder coated (DFT 40-60 microns) tubular frame is cantilever type & made of 0 2.54 + / - 0.03 cm x 0.2 +/- 0.016 cm thk. M.S. ERW Tube. Pneumatic Height Adjustment: - The pneumatic height adjustment has an adjustment stroke of 12.0 + / - cm. Telescopic bellow Assembly:- The bellow is 3 piece telescopic type and injection moulded in black polypropylene. Pedestal Assembly:- The pedestal is injection moulded in black 33% glass-filled Nylon – 66 and fitted with 5 nos. twin wheel castors. The pedestal is 66.3 + /- 0.5 cm. Twin Wheel Castors:- The twin wheel castors are injection moulded in Black Nylon. Pieces 6 Supplying & placing in Visitor Chair Seat / Back Assembly :- The seat and back are made up of 1.2 + / - 0.1 cm thick hot –pressed plywood measured as per QA method described in OCP-QLTA-PA 14-18 and upholstered with fabric upholstery covers and moulded polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. .The chair Back Size 47.5 cm (W) x 58.0 cm (H) Seat Size :- 47.0 cm (W) x 48.0 cm (D) High Resilience (HR) Polyurethane Foam: - The HR polyurethane foam is moulded with density = 45+ /- kg/m3 and hardness load 16 + /- kgf as per IS: 7888 for 25% compression. Armrests: - The one Piece armrest are injection moulded from black Co-polymer. Tubular Frame: - The powder coated (DFT 40-60 microns) tubular frame is cantilever type & made of 0 2.54 + / - 0.03 cm x 0.2 +/- 0.016 cm thk. M.S. ERW Tube.Total Quantity : 220
