|
| 1 | Description |
| 2 | Item no.01 Removing old paint from steel andother metal surfaces and making thesurfaces even with hand scrapping,scaffolding etc. complete. |
| 3 | Item No.02 Providing and applying priming coatover new/old steel and other metalsurfaces including preparing thesurface by thoroughly cleaning oil,grease, dirt and other foreignmatter and scoured with wirebrushes, fine steel wool, scrappersand sand paper, scaffolding etc.complete. |
| 4 | Item No.03 Providing and applying two coats ofsynthetic enamel paint of approvedcolour to new /old structural steelwork and wood work in buildings,including scaffolding if necessary,cleaning and preparing the surface(excluding primer coat) etc.complete |
| 5 | Item no.04 Painting (CW-PTG)4.1Painting of pipe pole up to 6 mlength along with street light/ polebrackets/ clamps etc by scrapping theexisting paint complete as perspecification no CW -PTG/PTP |
| 6 | 4.2 Painting of steel tubular/ rail/ RSJ pole above 6.0m length along withstreet light pole brackets, clamps etcby scrapping the existing paintcomplete as perspecification no CW -PTG/PTP |
| 7 | 4.3 Spray painting of distribution transformer above 200 kVA capacitycomplete as per specification no.CW-PTG/PDT |
| 8 | 4.4 Painting fencing of transformersubstation including all supports, ironwork and doors from both sides byscraping existing paint, with one coatof red oxide & two coats of aluminiumpaint complete |
| 9 | 4.5 Painting of feeder pillar/ switchgearsand frame of panel board with singlecoat of red oxide & two coats ofapproved quality enamel paint byscrapingexisting paint complete. (whilecalculating square meter area, areaof angle iron frame on which theswitchgears are erected shall beconsidered if required) |
| 10 | Item No.05 Providing and applying white-wash intwo coats on old / new plastered ormasonry surfaces and asbestoscement sheets including scaffoldingand preparing the surface bybrushing and brooming down etc.complete. |
| 11 | Item No.06 Providing and applying two coatsof exterior acraylic emulsion paintconfirming to corresponding I.S. ofapproved manufacture and ofapproved colour to the plasteredsurfaces includingcleaning ,preparing the plastersurface, applying primercoat ,scaffolding if necessary , andwatering the surface for two days etccomplete. |
| 12 | Item No.07 Providing and applying 2 coats ofalluminium paint of approved make tonew structural steel work in buildingsand workshops including scaffolding ifnecessary, cleaning and preparing thesurface (excluding primer coat)etc.complete |
| 13 | Item no.08 Providing and fixing in position,Double shuttered aluminiumextruded powder coated openabledoor of specified size with aluminiumdoor frame of powder coated section101.60 x 44.75mm , 3.18 mm thickand shutter comprising of powdercoated section having bottom andlock rail of size 150 mm x 44.5 mm x3.00 mm thick top rails 47.62 x 44.45mm x 3.00 mm thick , vertical style47.62 x 44.45 mm, 3.00 mm thickand for shutter plain glass panes 5mm thick for top panels and 12mmthick both side laminated phenolbonded particle board panels forbottom panels etc. , I.S.I.mark , heavy duty, Hydraulicfloor spring of150Kilogramcapacity , having heavyduty concealed lock, necessarybeading, glazing clips, PVC gaskets,250mm length aluminium towerbolts, 150mm dia. pad handle,etc. as per detailed design anddrawing or as directed byengineer in charge including allmaterials , labours, and equipmentetc.complete |
| 14 | Item No.09 Providing and fixing collapsible steelgate in one / two leaves with hotrolled vertical channels of 18 x 9 x 3mm minimum size, crossings of M.S.flats of size 18 x 5 mm T or E sectionfor runner of minimum 40 x 6 mmsize for flange, M.S. flat for toprunner of minimum size 40 x 12 mmwith roller wheels confirming tograde F.G. 150 fitted with snapheaded rivets of minimum size 6mm max. spacing of vertical channelsbe 100 mm enclosed gate positionand clear space of 150 mmbetween two sets of crossingswith hold fasts, stoppers, spaces,handles, locking arrangement andone coat of red lead primer and oilpainting etc. complete. (I.S.105211983). |
| 15 | Item No.10 Providing and fixing 900mm highS.S.304 Grade Stainless steel railingwith 40mm diameter and 1.5mmthick at top, 40mm diameter and1.5mm thick vertical supportsspaced at 1.5m center to centerand 8mm thick toughened glassincluding fabricating ,fixtures,errecting , necessary welding ,grinding , finishing, buffing tostainless steel pipe etc. complete |
| 16 | Item No.11 Providing and fixing rolling shutterfabricated from steel laths ofminimum thickness 0.9 mm with lockplate of 3.15 mm thickness reinforcedwith 35 x 35 x 5 mm angle sectionfitted with sliding bolts and handlesfor both sides, deep M.S. channelsection of depth and thickness notless than 65 mm and 3.15 mmrespectively with hold fastarrangements, M.S. Bracket plate 300x 300 x 3.15 mm minimum size andshape with square bar, suspensionshaft of minimum 32 mm diameter,hood cover of M.S. sheet not lessthan 0.9 mm thickness and of anysize at top and safety devicesincluding mechanical gear operationarrangement consisting of worm gearwheels and worms of high grade castiron or mild steel and one coat of redlead primer etc. complete. (I.S.62481979) (With mechanical gear) |
| 17 | Item No.12 Providing and fixing in position. (asper I.S.1868 / 1982) Aluminiumsliding window of two tracks withrectangular pipe having overalldimension 63.50 x 38.10 x 1.02mm at weight 0.547 Kilogram/R. M..and window frame bottom tracksection 61.85 x 31.75 x 1.20 mm atweight 0.695 Kilogram/R. M.. Topand side track section 61.85 x31.75 x 1.30 mm at weight 0.659Kilogram/R. M.. The shutter shouldbe of bearing bottom 40 x 18 x 1.25mm at weight 0.417 Kilogram/R. M..Inter locking section 40 x 18 x 1.10mm at weight 0.469 Kilogram/R. M..And handle section 40 x 18 x 1.25mm at weight 0.417 Kilogram/R. M..and top section 40 x 18 x 1.25 mm atweight 0.417 Kilogram/Runningmetre. As per detailed drawingsand as directed by Engineer incharge with all necessary Aluminiumsections fixtures and fastenings suchas roller bearing in nylon casting andself locking catch fitted in verticalsection of shutter including 5 mmthick plain glass with all requiredscrews and nuts etc, complete. Withcolour Anodising with box |
| 18 | Item No.13 Providing and fixing informatory sign boards in square or rectangular shapeof size 1.80m x1.20m made out of3mm Aluminum composite panelbonded with IRC Specified colour ofretro reflective sheeting of Type IVHigh Intensity Micro-Prismatic GradeSheeting (HIP) having pressuresensitive / heat activated adhesive,IRC Specified colour retro reflectivecutout border & messages havingpressure sensitive adhesive havingborder & messages in IRC Specifiedcolour background including M. S.angle iron frame of size 35 mm X 35mm X 5 mm & two M.S. angle ironpost of size 65 mm X 65 mm X 6mm, 3.65 m long, duly painted withflat oil paint having alternate blackand white bands of 25 cm widthincluding G.I. fixtures etc; fixing theboards in M-20 concrete block of size60cm X 60cm X 75cm includingtransportation etc; complete.Aluminum composite panel with TypeIV High Intensity Micro-PrismaticGrade Sheeting. |
| 19 | Item No.14 Providing and fixing informatory sign boards of size 60 cm x 80 cm madeout of 14 guage Aluminum sheetbonded with IRC Specified colour ofretro reflective sheeting of Type IVHigh Intensity Micro-Prismatic GradeSheeting (HIP) having pressuresensitive / heat activated adhesive,IRC Specified colour retro reflectivecutout border & messages havingpressure sensitive adhesive havingborder & messages in IRC Specifiedcolour background including M.S.angle iron post of size 65 mm X 65mm X 6 mm, 3.65 m long, dulypainted with flat oil paint havingalternate black and white bands of 25cm width including G.I. fixtures etc;fixing the boards in 1:4:8 concreteblock of size 60cm X 60cm X 75cmincluding transportation etc;complete. Alluminium sheet Type IVHigh Intensity Micro-Prismatic GradeSheeting |
| 20 | Item No.15 Providing and fixing cautionary / warning sign board of size 60 cm.having shape of equilateral trianglewith apex point upwards. prepared on16 gauge M.S. sheet includingpainting with one coat of zinccromate stoving primer and two coatseach of white back ground, redborder and backside gray stoveenamelled, bonded with cut out ofRetro reflective sheet Engineeringgrade, symbol / letters / numerals /border / arrow, coated with nonpealable crystal clear protectivetransparent coat retaining 100%reflection including one Nos. of M.S.Angle iron post of size 50 x 50 x 5mm of 3.65 m. long inflated atbottom drilled on top in one piecewithout joint painted with white andblack bands of 30 cm. fixing boardand post with 2 Nos. high strengthG.I. bolts and nuts of size 10 mm dia.and 20 mm long including all taxes,conveying, fixing in ground withcement concrete 1:4:8 block of 60cm x 60 cm x 75 cm sizeetc.complete. 60 cm. equilateraltriangle M.S. sheet with Engineeringgrade, |
| 21 | Item No.16 Providing, fabricating and erectingat site of work the tubular steelstructure (shed) as per standarddesign and specifications havingvarious spans in between trusses andin multiples of standard length ofbays as specified as per standardspecifications, inclusive of cost ofsteel tubular trusses, tubular columnspurlins, tie runners, foundation bolts,base plates, nuts and bolts, weldingwherever required etc. as perdetailed drawing inclusive of onecoat of anticorrosive paint and twocoats of oil painting of approvedquality and shade etc. complete.Spec. Nos. : As directed byEngineer-in-charge. |
| 22 | Item No.17 Providing and fixing 4 mm thickAluminum Composite Sheet contains0.5 mm thick Aluminium alloy coil intop and bottom along with 3.0 mmLDPE or Mineral core cover with PVDPcoat in 3 layers and protective film .The work includes cutting, fabricatingACS sheet to require size and shape,fixing sheet to steel structure usingrivets or screws and sealing joint andedge with silicone or polyurethaneetc. complete. as per colour anddesign approved by Engineer incharge. The item includes all labour,transportation and loading unloadingcharges etc complte |
| 23 | Item No.18 Supplying fixing 5 mm thick Acrylicsheet font in 3D for front ElevationEntrance gate. The work includescutting and fabrication of acrylicsheet to required size and shape offont with letter illuminationarrangement. The Fixing of font usingstuds ensuring proper alignment andleveling of font as per direction ofEngineer in charge |
| 24 | Item No.19 Providing and erecting FRP Security Cabin having size: 10 feet x 15 Feet x7 Feet including 01 No of Door, 02Nos of Sliding Windows, 02 Nos ofCeiling Fans, 02 Nos of LED TubeLights, 01 No of Internal TelephoneConnection, 3 Pin Socket etccomplete |
| 25 | Item No.20 Credit for Dismantled Material20.1 Aluminum materials |
| 26 | 20.2 H.G. / M.S. / G.I. Materials / Poles kilogrametc. |
