}

Tender For Welcome Maintenance And Misc Br Reapir Works At Old Rs Colaba Under Age Br Ii Nw Navy Nagar, mumbai-Maharashtra

Military Engineer Services has published Tender For Welcome Maintenance And Misc Br Reapir Works At Old Rs Colaba Under Age Br Ii Nw Navy Nagar. Submission Date for this Tender is 11-07-2025. Kitchen Equipment Tenders in mumbai Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

49770028
Tender For Welcome Maintenance And Misc Br Reapir Works At Old Rs Colaba Under Age Br Ii Nw Navy Nagar
Tender
Indian
Maharashtra
Mumbai
11-07-2025

Tender Documents

Tender Details

Welcome Maintenance And Misc Br Reapir Works At Old Rs Colaba Under Age Br Ii Nw Navy Nagar; 1.00 M & L for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and directed by Engr-in-Charge. 2.00 M&L applying one coat of oil bound distemper on old decorated surfaces of wall and filling the surface inperfections such as holes, dirt, fine cracks including preparation of surface complete all as specified. 3.00 M&L for Preparation of old painted surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying two coat of synthetic enamel paint, complete all as specified and as directed by EIC. 4.00 M&L for Preparation of old painted surfaces of steel or steel based materials of any description not other wise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of antirush paint/red oxide primer, complete all as specified and as directed by EIC. 5.00 M & L for preparation of wall surface and applying two coat of distemper oil emulsion over 1mm thick wall care putty complete all as specified and directed by Engr-in-Charge. 6.00 S & F in repairs Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to wooden doors / windows shutter with wooden beading (any size) and fixed aluminium window / vent with aluminium wire staples complete all as specified and directed by Engr-in-Charge. 7.00 S & F for in repair powder coated aluminium serrated finish 20/25mm dia curtain rod including fancy types domes cum brackets suitable for 20/25mm dia curtain rod fixed with C/P screws & rovel plugs and fixed to both ends of the curtain rod etc complete all as specified and directed by Engr-in-Charge. 8.00 Taking down cement plaster of any discription including racking out joints hacking for key scrubbing down with water complete all as specified and directed by Engr-in-Charge. 9.00 M & L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed by Engr-in-Charge. 10.00 M & L for rendering 5mm thick in CM 1:3 on ceilling surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. 11.00 M & L for preparing newly plastered surfaces of wall, priming with alkali-resistant priming paint and applying two coats of distemper oil emulsion, white or tinted over 1mm thick wall care putty complete all as specified and directed by Engr-in-Charge. 12.00 M & L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-Charge. 13.00 M & L in repairs CI Nahani trap dia of outlet 75mm with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) including jointing to waste pipe in runlead complete all as specified and directed by Engr-in-Charge. 14.00 M & L for dismantling floor, hearth, or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge. 15.00 M&L non skid coloured ceramic tiles 7 to 8mm thick and area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including bedding layer of 20mm thick in CM 1:6 complete all as specified and directed by Engr-in-Charge. 16.00 M & L for coloured glazed ceramic tiles size 300x200x7mm on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match of the shade over and incl 10mm thick backing coat in C:M 1:4 complete all as specified and directed by Engr-in-Charge. 17.00 M&L machine cut granite (of any type) slab 18 to 20mm thick as in like kitchen plateform etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over 10 mm thick in CM 1:6 including grinding, polishing and making necessary hole for gas pipe and necessary bull nosing etc complete all as specified and directed. 18.00 Dismantling of stone slabs, bedded and pointed in any mortar of any description or thickness in floors, approns, skirting, jamb/cill etc including removal of debries out of defence land complete all as specified and directed. 19.00 S&F in repair sink with drain board made of stainless steel 1mm thick kitchen or laboratry with plugs, washers and wastes coupling fitting, including beading in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge. 20.00 S & F in repair PVC valveless, syphonic action type, flushing cristern, low level, white, 10 ltr capacity with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engr-in-Charge. 21.00 S & F in repair vitreous china ware wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed by Engr-in-Charge. 22.00 S & F 32 mm dia Waste fittings, brass chromium plated suitable for glazed ware sinks, wash basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-Charge. 23.00 S & F LDPE PVC pipes of pressure rating 6 kgf/Sq.cm of 32/40 mm bore fixed complete to walls, ceiling or in floors including bend and sockets etc; any type of pipe complete all as specified and directed by Engr-in-Charge. 24.00 S & F in repair pillar tap 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge. 25.00 S & F chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engr-in-Charge. 26.00 S & F 600 mm x 450 mm bevelled edge mirror of selected quality glass decorative type, mounted on 6 mm thick BWP grade plywood, fixed to wooden plugs with CP brass screws and cup washers complete all as specified and directed by Engr-in-Charge. 27.00 S&F in repair 100mm size stainless steel medium weight butt hinges complete all as specified and directed by Engr-in-Charge. 28.00 S&F in repair 125 mm extruded aluminium handles, fabricated type anodised fixed complete all as specified and directed by Engr-in-Charge. 29.00 S&F in repairs 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge. 30.00 S&F in repairs 300 mm long aluminium alloy , anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed by Engr-in-Charge. 31.00 S&F in repairs 140 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all complete as specified and as directed by Engr-in-Charge. 32.00 Repair to wooden joinery works such as resecuring or easing and adjusting of door , window, kitichen cabinet, cupboard of any size , refixing hings, tower bolt, handle by providing nails/screw etc complete as directed by engr-in-charge. Note: Works shall be carried out upto G+14 storey bldg. 1 Old Aluminium wire cloth Sqm 950.00 10.00 9500.00 2 Old Curtain Rod incl bracket RM 700.00 5.00 3500.00 3 CI Nahani/floor trap any size Each 100.00 10.00 1000.00 4 Old stone slabs & Tiles any type Sqm 530.00 5.00 2650.00 5 Old kitchen sink incl cupling fitting and waste pipe Each 10.00 250.00 2500.00 6 Old PVC flushing cistern incl flush pipe Each 30.00 50.00 1500.00 7 Old Wash Hand Basin incl cupling fitting and waste pipe Each 30.00 50.00 1500.00 8 Old Pillar taps, , Towel Rail Each 60.00 30.00 1800.00 9 Old Alu Door Handle, Towel Bolt, Sliding Bolt Each 220.00 5.00 1100.00 10 Old Door Stoper Each 400.00 5.00 2000.00

Key Value

Document Fees
INR 500 /-
EMD
INR 90000.0 /-
Tender Value
INR 45 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail