Tender For Erection Of 3 Phase 11Kv Line 3.60 Km And S/S For New Connection Of Parwan Pariyojna Project Singola Along With11kv Bay Extension At 33/11Kvgss Ishwarpura Under Aen (Onm) Jpd Mangrol On Labour Rate Of Arc-2023 Basis Under In Baran Cir., baran-Rajasthan

Tender For Erection Of 3 Phase 11Kv Line 3.60 Km And S/S For New Connection Of Parwan Pariyojna Project Singola Along With11kv Bay Extension At 33/11Kvgss Ishwarpura Under Aen (Onm) Jpd Mangrol On Labour Rate Of Arc-2023 Basis Under In Baran Cir. - 1 Part-A 2 Conducting route survey as per approved route map and pegging of route with tee off point & double pole locations. 3 Trimming of tree branches/plants and preparing route approchases for proposed 4 9 Mtr./ 1.2mx0.6mx 1.50 m deep 5 12.8/12.6 Mtr/ 1.5mx1.5m x2.10 m deep 6 6x5/8-0.75x0.5x1.35 m 7 With in10 Kms. 8 With in10 Kms. 9 Within 10 Kms. 10 Within10 Kms. 11 With in 10 Kms. 12 LatticeStructure 13 PCC Poles 9 Mtr. Long (200 Kg) 14 PCC Poles 9 Mtr. Long 200 Kg 15 6x5/8 with 7/10 SWG stay wire 16 Providing and laying of cement concret in ratio 1:3:6: using 43 grad cement river sand and 12mm to 20 graded bleasted crusher broken pit foundation according to the size/ type of supports / stay set including compation cunning fou 21 day in steel plate sh 17 Supplying and laying of randum rubble stone boulder having weight not less than 20 Kgs. 18 Fixing of all type of fabricated material on erected supports with nut & bolt as per approved design & drawing of Sub-Station 19 11 KV Line 20 11 KV Line 21 Fixing of 11 KV Disc insulator for 11 KV lines (each unit consiting of 1 Nos. disc & 1 Set of H/W) on terminal point including fixing of hardware and strips. The Nut 7 Bolts will be supplied by the contractor for which the payment will be made at the prev 22 Fixing of 11 KV pin insulator with pins 23 11KV G.O. switch 24 11KV Horn Gap fuse set 25 11 KV LA set 26 Fixing of PG clamp of weasal/rabbit conductor 27 Fixing of PG clamp of Dog/ Racoon conductor 28 Errection of 11 KV RMU complete with accessories on existing foundation including use of special tool and condusting all pre commissioning test before anergization. 29 ACSR Rabbit Conductor 30 Earthing of Line for all type of supports as per REC Constructions standreds using stay wire/ G.I. wire with 1 piece of M.S. rod of 20 mm dia each 3 meter long and driving them in to earth by mechenical means at a distance as per approved design and drawi 31 Hard soil 32 Laying of MS flat/MS rod in 0.65 mtrs deep excavated trench and welding of MS flat/rod continuosly with 100mm overlaping for straight joint including coaling of MS flat joints with molten bitumen and covering joint with bitumen impregnated tape to protect from rust. 33 Shaping of MS flat for connecting the equipments with earthmesh. The work including the welding of MS flat with equiments/strcture and also includes coating of MS flat jints withmoltem bitumen and covering joints with bitumen imperegnated tape to protect from rust. 34 Where drilling is not required 35 supply and errection of maintenance free gel earthing with pipe in pipe/pipe in strip technology filled with anti corrosive conductive compound (CPRI tested) below the ground in 150-200 mm dia earth pit and surounding field with required minural filling compound. 36 ACSR DOG/RABBIT 37 11KV VCB (Outdoor) 38 Installation of metering oint on 11 KV Out going feeder at 33/11 KV S/S The installation work to be carried out as per drawing / design under the supervision of concermed Assistant Engineer. 39 Other steel item 40 13/16 dia holes (20.63mm dia) 41 11/16 dia holes (17.46mm dia) 42 a) 3x35Sqmm to 3x185 Sqmm. 43 Note :- Rs. 50.43 per Mtr. Shall be paid extra for excavation of puccka road. 44 (i) 3x35 Sqmm to 3x185 Sqmm 45 (i) 3x35 Sqmm to 3x185 Sqmm 46 A) With in 10 Km 47 installation testing as per Nigams norm & commissioning of new CT/PT set on ercted supports including jumpering wring crimping of lugs clamping earth connection of body and conducting per commissioning test before energistion and stisfactory operation in 48 Supply and fixing the nuts and bolts are to be provided by the contractor as per Nigam specification for which payment will be made as per prevaling Discom store issue rates.

INR 2950 /-

INR 12400.0 /-

INR 6.20 Lakhs /-