Tender For 1 Road Safety Work At Various Places In District Shamli In The Financial Year 2024-25 - Providing And Erecting A W Metal Beam Crash Barrier Comprising Of 3 Mm Thick Corrugated Sheet Metal Beam Rail, 70 Cm Above Road/Ground Level, Fixed On Is, shamli-Uttar Pradesh

Tender For 1 Road Safety Work At Various Places In District Shamli In The Financial Year 2024-25 - Providing and erecting a W metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 of MOR&TH. I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST. LKO SOR No. 26 Ch. 26 2 Providing and fixing of standard metal Delineators as per IRC 79 2019 consisting of minimum retro reflective unit exposed area of 330 square CM in white colour full cube corner microprosmatic nonmetallic retro reflective heating on each side confirming with IRC 67 2012 and meeting the coefficient of retro reflection values as per asdmd 4956 type 11 table specification the dailymated shall be painted with powder coat of minimum 40 micron thickness on top of which retro reflective heating Shelby pasted on both side the structure salary manufactured in role forming process and shall have height not less than 80 mm above the ground with not less than 100 mm and Shail extend not more than 300mm below the ground while being installed the front and back faces of delinator should be covered with the radius of not less than 200 mm and with delta angle or central angle of curve line between 200 degree and 30 degree to increase the visibility of delegator for vehicles moving in continuous curves that deleted shell have groups across the length to make the reflective heat wander Pro reflective heating shall be tested for 3 year outdoor weathering list in Indian condition as per IRC 67 2012 and proof of the same in the government report shall be uploaded in which coating tender if someone tender pre qualify condition do not ask for government report then the report shall be submitted to engineer in chief before finalization of Bill that ilinator is meant for application on gaps in median traffic Island dangerous band round about narrow bridge is desired by site engineer. I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST. LKO SOR No. 1 Ch. 26 3 Supply and fixing of reflective raised pavement marker with its body surface made of tough ASA (Acrylic styrene Acrylonitrile) or HIPS (Hi- impact Polystyrene) or acrytonitrile butadiens styrena (ABS). The marker shall supported a load of 1335 kg tested in accordance with ASTMD 4280 and its reflective panels shall consist of number of lenses containing single or dual prismatic cubes of providing total internal rellection of the light entering the lens face. Retro reflecting surface shall preferably be 35t 5° to base and area of each retro- reflecting surface shall not be less than 13.0 sqcm road studs shall be legibly marked with name trade mark or other means of identification of the manufacturer. Dimensions of road studs should not be less than 100mm x x100mm x10mm. I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST. LKO SOR No. 5 Ch. 26RPM (with shank) as per ASTM 4 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67:2012 made of high intensity grade sheeting vide clause 801.3, fried over aluminum sheeting type-IV 1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm below ground level as per approved drawing. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST. LKO SOR No. 17 Ch. 26a) 90 cm equilateral triangle with diffinitation plate size (20 cm x 60 cm) 5 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67:2012 made of high intensity grade sheeting vide clause 801.3, fried over aluminum sheeting type-IV 1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm below ground level as per approved drawing. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST. LKO SOR No. 17 Ch. 26x) 30 x 90 cm (Left/Right) Object Hazard

INR 667 /-

INR 24000.0 /-

INR 2.40 Lakhs /-