Tender For P6a1y41913-Procurement of HSS PS END MILL,TANGED END MILL AND SLOT DRILL, Tanged End Mill And Slot Drill , Procurement Of Tools , Hss Ts Tngd End Long Endmil Dia 63X355mm -- Hss M42 Morse Taper Shank End Mills Type A, Tanged End Long Series Tool Type N, Rh Cutting, Rh Helical Flutes, As Per Is:6354-1971, With Cotter Slots On The Shank As Per Is:13776-1993, D(Dia) Xmorse Taper, 63 X Mt5 , Hss Ts Tngd Rough Endmil Dia 63X450mm -- Hss M35 Taper Shank Type A Heavy Duty Rough End Mill, Long Series, Rh Cuuting, Rh Helical Flutes, Sinosoidal Form With Chip Breaker Grooves In Ground Relieved, Except Size All Other Details As Per Is:6354-1971 With Cotter Slots On The Shank As Per Is:13776-1993 D(Dia) X L(Fl) X L1(Oal) X Shank: 63 X 250 X 450 X Mt5. , Hss Ts Tngd Rough Endmil Dia 63X325mm -- Hss M35 Taper Shank Type A Tanged End Heavy Duty Rough End Mill, Long Series, Rh Cuuting, Rh Helical Flutes, Sinosoidal Form With Chip Breaker Grooves In Ground Relieved, Except Size All Other Details As Per Is:6354-1971 With Cotter Slots On The Shank As Per Is:13776-1993, Dia X Morse Taper, D(Dia X L (Fl) X L1 (Oal) X Shank, 63 X 150 X 325 X Mt5 , Hss Ts Tngd Rough Endmil Dia 50X375mm -- Hss M35 Taper Shank Type A Tanged End Heavy Duty Rough End Mill, Long Series, Rh Cuuting, Rh Helical Flutes, Sinosoidal Form With Chip Breaker Grooves In Ground Relieved, Except Size All Other Details As Per Is:6354-1971 With Cotter Slots On The Shank As Per Is:13776-1993, Dia X Morse Taper, D(Dia X L (Fl) X L1 (Oal) X Shank, 50 X 200 X 375 X Mt5 , Hss Ts Tngd Rough Endmil Dia 50X300mm -- Hss M35 Taper Shank Type A Tanged End Heavy Duty Rough End Mill, Long Series, Rh Cuuting, Rh Helical Flutes, Sinosoidal Form With Chip Breaker Grooves In Ground Relieved, Except Size All Other Details As Per Is:6354-1971 With Cotter Slots On The Shank As Per Is:13776-1993, Dia X Morse Taper, D(Dia X L (Fl) X L1 (Oal) X Shank, 50 X 125 X 300 X Mt5 , Hss Ts Tanged End Endmill Dia 63Mm -- Hss M42 Morse Taper Shank End Mills Type A, Tanged End Standard Series Tool Type N, Rh Cutting, Rh Helical Flutes, As Per Is:6354-1971, With Cotter Slots On The Shank As Per Is:13776-1993, Dia X Shank, 63Mm X Mt5 , Hss Ts Tngd End Long Endmil Dia 40X265mm -- Hss M42 Morse Taper Shank End Mills Type A, Tanged End Long Series Tool Type N, Rh Cutting, Rh Helical Flutes, As Per Is:6354-1971, With Cotter Slots On The Shank As Per Is:13776-1993, D(Dia) X Morse Taper, 40 X Mt4 , Hss Ts Tngd End Long Endmil Dia 25X202mm -- Hss M2 Morse Taper Shank End Mills Type A, Tanged End Long Series Tool Type N, Rh Cutting, Rh Helical Flutes, As Per Is:6354-1971, D(Dia) X Morse Taper, 25 X Mt3 , Hss Ts Tngd End Long Endmil Dia 40X375mm -- Hss M42 Morsetaper Shank End Mills Type A, Long Series Tool Type N, Rh Cutting, Rh Helical Flutes, Except Size All Other Details As Per Is:6354-1971, With Cotter Slots On The Shank As Per Is:13776-1993, D X L X L1 X Taper, 40 X 200 X 375 X Mt5 , Hss Ts Tanged End Endmill Dia 50Mm -- Hss M42 Morse Taper Shank End Mills Type A, Tanged End Standard Series Tool Type N, Rh Cutting, Rh Helical Flutes, As Per Is:6354-1971, With Cotter Slots On The Shank As Per Is:13776-1993, Dia X Shank, 50Mm X Mt5 , Hss Ts Tanged End Endmill Dia 40Mm -- Hss M42 Morse Taper Shank End Mills Type A, Tanged End Standard Series Tool Type N, Rh Cutting, Rh Helical Flutes, As Per Is:6354-1971, With Cotter Slots On The Shank As Per Is:13776-1993, Dia X Shank, 40Mm X Mt4 , Hss Ts Tanged End Endmill Dia 32Mm -- Hss M42 Morse Taper Shank End Mills Type A, Tanged End Standard Series Tool Type N, Rh Cutting, Rh Helical Flutes, As Per Is:6354-1971, Dia X Shank, 32Mm X Mt3 , Hss Slot Drill Dia 26Mm -- Hss M2 Slot Drills With Parallel Shank Type Awith Flat Face, Straight Flutes, Rh Cutting, Tool Type H, Except Size All Other Details As Per Is:6352-1971, D(Dia) X D1(Shank Dia), 26 X 25Mm , Hss Ps End Mill Dia 4Mm -- Hss M2 Parallel Shank Endmills, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aas Per Is:6353-1991, Dia : 4Mm , Hss Ps End Mill Dia 6Mm -- Hss M2 Parallel Shank Endmills, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aas Per Is:6353-1991, Dia : 6Mm , Hss Ps End Mill Dia 7Mm -- Hss M2 Parallel Shank Endmills, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aas Per Is:6353-1991, Dia : 7Mm , Hss Ps End Mill Dia 8Mm -- Hss M2 Parallel Shank Endmills, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aas Per Is:6353-1991, Dia : 8Mm , Hss Ps End Mill Dia 9Mm -- Hss M42 Parallel Shank Endmills, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aas Per Is:6353-1991, Dia : 9Mm , Hss Ps End Mill Dia 10Mm -- Hss M42 Parallel Shank Endmills, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aas Per Is:6353-1991, Dia : 10Mm , Hss Ps End Mill Dia 11Mm -- Hss M2 Parallel Shank Endmills, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aexcept Size All Other Details As Per Is:6353-1991, D(Dia) X D1 (Shank Dia), 11 X 10Mm , Hss Ps End Mill Dia 12Mm -- Hss M2 Parallel Shank Endmills, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aas Per Is:6353-1991, Dia : 12Mm , Hss Ps End Mill Dia 14Mm -- Hss M2 Parallel Shank Endmills, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aas Per Is:6353-1991, Dia : 14Mm , Hss Ps End Mill Dia-- Hss M2 Parallel Shank Endmills, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aas Per Is:6353-1991, Dia : 16Mm , Hss Ps End Mill Dia 18Mm -- Hss M2 Parallel Shank Endmills, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aas Per Is:6353-1991, Dia : 18Mm , Hss Ps End Mill Dia 20Mm -- Hss M2 Parallel Shank Endmills, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aas Per Is:6353-1991, Dia : 20Mm , Hss Ps End Mill Dia 22Mm -- Hss M2 Parallel Shank Endmills, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aas Per Is:6353-1991, Dia : 22Mm , Hss Ps End Mill Dia 25Mm -- Hss M2 Parallel Shank Endmills, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aas Per Is:6353-1991, Dia : 25Mm , Hss Ps End Mill Dia 32Mm -- Hss M2 Parallel Shank Endmills, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aas Per Is:6353-1991, Dia : 32Mm , Hss Ps End Mill Dia 36Mm -- Hss M2 Parallel Shank Endmills, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aas Per Is:6353-1991, Dia : 36Mm , Hss Ps End Mill Dia 40Mm -- Hss M2 Parallel Shank Endmills, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aas Per Is:6353-1991, Dia : 40Mm , Hss Ps Long End Mill Dia 3X12x44mm -- Hss M2 Parallel Shank Endmills, Long Series, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aas Per Is:6353-1991, Dia : 3Mm , Hss Ps Long End Mill Dia 4X19x51mm -- Shank Endmills, Long Series, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aas Per Is:6353-1991, Dia : 4Mm , Hss Ps Long End Mill Dia 5X24x58mm -- Hss M2 Parallel Shank Endmills, Long Series, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aas Per Is:6353-1991, Dia : 5Mm , Hss Ps Long End Mill Dia 6X24x68mm -- Hss M2 Parallel Shank Endmills, Long Series, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aas Per Is:6353-1991, Dia : 6Mm , Hss Ps Long End Mill Dia 7X30x74mm -- Hss M2 Parallel Shank Endmills, Long Series, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aas Per Is:6353-1991, Dia : 7Mm , Hss Ps Long End Mill Dia 9X38x88mm -- Hss M2 Parallel Shank Endmills, Long Series, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aas Per Is:6353-1991, Dia : 9Mm , Hss Ps Long End Mill Dia 11X45x95mm -- Hss M2 Parallel Shank Endmills, Long Series, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aas Per Is:6353-1991, Dia : 11Mm , Hss Ps Long End Mill Dia 12X53x150mm -- Hss M2 Parallel Shank Endmills, Long Series, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aexcept Size All Other Details As Per Is:6353-1991, D(Dia) X D1 (Shank Dia) X L (Fl) X L1(Oal), 12 X 12 X 53 X 150Mm , Hss Ps Long End Mill Dia 12X60x100mm -- Hss M2 Parallel Shank Endmills, Long Series, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aexcept Size All Other Details As Per Is:6353-1991, D(Dia) X D1 (Shank Dia) X L (Fl) X L1(Oal), 12 X 12 X 60X 100Mm , Hss Ps Long End Mill Dia 14X53x110mm -- Hss M2 Parallel Shank Endmills, Long Series, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aas Per Is:6353-1991, Dia : 14Mm , Hss Ps Long End Mill Dia 16X63x150mm -- Hss M2 Parallel Shank Endmills, Long Series, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aexcept Size All Other Details As Per Is:6353-1991, D(Dia) X D1 (Shank Dia) X L (Fl) X L1(Oal), 16 X 16 X 63 X 150Mm , Hss Ps Long End Mill Dia 18X63x175mm -- Hss M2 Parallel Shank Endmills, Long Series, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aexcept Size All Other Details As Per Is:6353-1991, D(Dia) X D1 (Shank Dia) X L (Fl) X L1(Oal), 18 X 16 X 63 X 175Mm , Hss Ps Long End Mill Dia 20X75x200mm -- Hss M2 Parallel Shank Endmills, Long Series, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aexcept Size All Other Details As Per Is:6353-1991, D(Dia) X D1 (Shank Dia) X L (Fl) X L1(Oal), 20 X 20 X 75 X 200Mm , Hss Ps Long End Mill Dia 25X90x200mm -- Hss M2 Parallel Shank Endmills, Long Series, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aexcept Size All Other Details As Per Is:6353-1991, D(Dia) X D1 (Shank Dia) X L (Fl) X L1(Oal), 25 X 25 X 90 X 200Mm , Hss Ps Long End Mill Dia 32X90x250mm -- Hss M2 Parallel Shank Endmills, Long Series, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aexcept Size All Other Details As Per Is:6353-1991, D(Dia) X D1 (Shank Dia) X L (Fl) X L1(Oal), 32 X 25 X 90 X 250Mm , Hss Ps Long End Mill Dia 36X106x186mm -- Hss M2 Parallel Shank Endmills, Long Series, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aas Per Is:6353-1991, Dia : 36Mm , Hss Ps Long End Mill Dia 40X125x217mm -- Hss M2 Parallel Shank Endmills, Long Series, Tool Type N, Rh Helical Flutes, Rh Cuuting, Type Aexcept Size All Other Details As Per Is:6353-1991, D(Dia) X D1 (Shank Dia) X L (Fl) X L1(Oal), 40 X 32 X 125 X 217Mm , Hss Ps Roughingend Mill Dia 7Mm -- Hss M42 Parallel Shank Heavy Duty End Mills, Type A, Rh Cutting, Rh Helix, Sinosoidal Chip Breaker Grooves, As Per Is:6353-1991, Dia : 7Mm , Hss Ps Roughingend Mill Dia 8Mm -- Hss M42 Parallel Shank Heavy Duty End Mills, Type A, Rh Cutting, Rh Helix, Sinosoidal Chip Breaker Groovesas Per Is:6353-1991, Dia : 8Mm , Hss Ps Rough End Mill Dia 10Mm -- Hss M42 Parallel Shank Heavy Duty End Mills, Type A, Rh Cutting, Rh Helix, Sinosoidal Chip Breaker Groovesas Per Is:6353-1991, Dia : 10Mm , Hss Ps Roughingend Mill Dia 13Mm -- Hss M42 Parallel Shank Heavy Duty End Mills, Type A, Rh Cutting, Rh Helix, Sinosoidal Chip Breaker Grooves, Except Size All Other Details As Per Is:6353-1991, D(Dia) X D1 (Shank Dia) X L (Fl) X L1(Oal), 13 X 12 X 25 X 85Mm
