|
| 1 | Earth work in Excavation by mechanical means /manual meansin foundation trenches or drains excavates soil anddisposal of surplusexcavates soilas directed, within a lead of 50 m& lift up to1.5 m i/c all as per DSR No- 2.8.1 |
| 2 | Earth work in excavation in foundation in o/s i/c lift up to 1.50 m and lead up to 50.00 m etc. all complete as per PWD-2.6.1+2.26.1 |
| 3 | P/Lin position inC.C specified grade excluding the cost of centering, shuttering ,finishing and reinforcement ( 1:4:8)with cement , coarse sand and 40mm gauge stone ballast i/c all as per DSR No- 4.1.8 |
| 4 | Brick work wthi common burnt clay (non modular) bricks of class -150 in foundation and plinth with(1:4) cement and C/ sand mortar i/c allas per DSR No-6.1.1 |
| 5 | Brick work with common burnt clay (non modular) bricks of class -150 in foundation and plinth with(1:6) cement and C/ sand mortar i/c allas per DSR No-6.1.2 |
| 6 | Providing and laying in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded Stone aggregate 20 mm nominal size) and curing complete, excluding cost of form- work, in foundation and floors.Dsr no-4.1.3 |
| 7 | R.C.C. work in wall (any thickness), i/cattached pilasters buttresses ,plinth and string courses , fillets, columns etcexcluding the cost of centering, shuttering ,finishing and reinforcement ( 1:1.5:3)with cement , coarse sand and 20mm gauge stone ballast i/c all as per DSR No- 5.2.2 |
| 8 | R.C.C. work in wall (any thickness), i/cattached pilasters buttresses ,plinth and string courses , fillets, columns etcexcluding the cost of centering, shuttering ,finishing and reinforcement ( 1:1.5:3)with cement , coarse sand and 20mm gauge stone ballast i/c all as per DSR No- 5.3 |
| 9 | Centering, shuttering i/c strulting propper etc and removal of from forfoundation ,footing,bases o columns etc for mass concretei/c all as per DSR No- 5.9.1 |
| 10 | Centering & shuttering including strutting, propping etc. and removal of form forAs perPWD Ch-5D.A.R.-5.9.3 |
| 11 | Centering, shuttering i/c strulting propper etc and removal of from forlintels, beam,plinth beamsetci/c all as per DSR No- 5.9.5 |
| 12 | M.S. or iron work in plan work such asR.C.C. work including cutting and bending etc. as per DSR NO-5.22.1 |
| 13 | Brick work with common burnt clay (non modular) bricks of class -150 in superstructure above plinth with(1:6) cement and C/ sand mortar i/c allas per DSR No-6.4.2 |
| 14 | P/F Stainless steel railing made of hollow tubes channeles, plates etc i/c all as per DAR No- 10.28 |
| 15 | Fabrication ofSteelDoor windows and ventilatoropenable etc. As per DAR-10.11.1 |
| 16 | S/F of flush doors commercial quality conforming to I.S. 2202 Part 1 (1983) including fixing of woodencleats and stoppers and including fixing and adjustment of hings bolts locks handles springs fitting with necessary screws complete. As per DAR-9.21.1 |
| 17 | Providing & fixing oxidized M.S. sliding door bolts ISI marked with nuts and screws etc complete (300mm x 16mm). As per DAR-9.62.1 |
| 18 | Providing & fixing oxidized M.S. tower bolts ISI marked with nuts and screws etc complete (300mm x 10mm). As per DAR-9.63.1 |
| 19 | Providing & fixing oxidized M.S. Door Handle ISI marked with nuts and screws etc complete (125mm). As per DAR-9.66.1 |
| 20 | Providing & fixing oxidized M.S. Pressed butt hinges bright finishedISI marked with nuts and screws etc complete (125x65x2.12mm). As per DAR-9.55.1 |
| 21 | 15 mm thick cement, sand plaster in 1:6 cement & C/sand mortar as per DAR-13.5.2 |
| 22 | 15 mm cement plaster in single coat on rough side of single or half brick wall finished with a floating coat of neat cement. (1) 1 cement : 3 Coarse sand DSR-13.10 |
| 23 | Supply & Laying of 40 mm gauge over burnt brick ballast including all materials, labour and T&P etc. for proper completion of the work. Ch-1, Mat-2a |
| 24 | Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design:(With 20x20mm square bar) DSR 19.15.1- |
| 25 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. As perPWD-11.37 A |
| 26 | Providing and laying rectified Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. As per PWD-11.40 |
| 27 | Providing and layingPolished granite stone flooring i/ c all as per DSR- 11.56.1 |
| 28 | Painting two coats on steel or other metal surfaceincl. material,labour and T&P etc. required for proper completion of work, as per DSR No-13.48.2 |
| 29 | Providing and Applying white cement based putty average thickness of 1 mm of approved brand over the plasterd wall surface i/c all DSR 13.80 |
| 30 | Finishing walls with two coat of acrylicsmooth exterior paint of best quality supply of all material, labour and T&P etc. requ. for proper comp.DSR 13.46.1 |
| 31 | Earth filling available excavated earth (excluding rock)in tranches, plinth,sides of foundation etc. in layars nat exceeding 20cm in depth , consolidating each deposited layer by ramming and watering,lead up to 50 m and lift upto 1.5 m i/call DSR No-2.25(a) |
| 32 | S/F inplinth with sand under floors i/c all as perDSR No- 2.27 |
| 33 | 40 mm thik CC Flooring (1:2:4) finished with a floating coat of neat cement i/c all DSR 11.3.1 |
| 34 | Providing and fixingprecoated galvanised iron profile .50 mm thickness with zink coating i/c all as per DSR-12.50 |
| 35 | Retro -refective type-11 with 4 mm thick ACM double sideproviding &fixing ofreflective signs with a corrosion resistanct 4 mm thick with. 4 to 0.5 mm both sidesaluminumskin aluminum compositepannel face to be fully covers with high intensity prismatic Sheeting type 5 as IRC 67 2012 retro reflective Sheeting with back frame MS angle of 35x35x5mm depends letters numerals borders etc should be as per morth sepec.no 801.3.7 the Sheetingshall have a prreessure sensitive addessive etc in comp.. ASTM sepectification (o 4956-09) |
| 36 | Laying brick soling layer on prepared sub-grade with brick on end edging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolliing the same with threewheel road roller 80-100 kN as per Technical Specification Clause 412 |
| 37 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests i/c all as per DSR-17.1.1 |
| 38 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal asi of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushig cistern with stadard flush pipe ad C.P. brass spreaders with brass unions and G.I. clamps complete i.c paintig of fittings and brackets cutting IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required One urinal basin with 5 litre white P.V.C. automatic flushinng cisternn i/c all as per DSR-17.4.1 |
| 39 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tappillar tap.i/c all as per DSR-17.7.4 |
| 40 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 32MM dia i/c all as per DSR-17.28.1.1 |
| 41 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. i/c all as per DSR-18.48 |
| 42 | Supplying & Fixing of600x450 mm beveled edge mirror of superior glass as per complet DAR no- 17.31 |
| 43 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.(internal work)25mm dia nominal outer dia pipes i/c all as per DSR-18.7.3 |
| 44 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.15mm dia nominal outer dia pipesi/c all as per DSR-18.8.1 |
| 45 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20mm dia nominal outer dia pipes i/c all as per DSR-18.8.2 |
| 46 | Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. 15mm nominal bore 15mm nominal bore i/c all as per DSR-18.21.2.1 |
| 47 | Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 15mm nominal bore i/c all as per DSR-18.49.1 |
| 48 | Providing & fixing CP brass longbody bib cock of approved quality conforming to IS 8931 15mm nominal bore i/c all as per DSR-18.50.1 |
| 49 | Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 15mm nominal bore i/c all as per DSR-18.53.1 |
| 50 | Providing and fixing gun metal gate valve with wheel of approved quality. 25mm dia nominal bore i/c all as per DSR-18.17.1 |
| 51 | Providing and fixing brass stop cock of approved quality.20 mm nominal borei/c all as per DSR-18.16.2 |
| 52 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A at 110mm dia pvc Tee pipe as per kanpur sor ch no-1 item no-46 |
| 53 | P/f of submersible pump of approved make with 1.0 H.P oil field I.S.I. mark i.c with strater and 30mtr. cablecapacity. |
| 54 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineriesequired for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre depth below ground level. as per Lucknow DSR 23.1.1.1 |
| 55 | Supply assembling lowering and fixing in vertical position in bore well 100mm dia PVC pipe i/c hire and labour charges,fitting & accessries etc all complete ,for all depth as per DRS-23.3.1 |
| 56 | Supply assembling lowering and fixing in vertical position in bore well 100mm dia PVC screen/stainer pipe i/c hire and labour charges,fitting & accessries etc all complete ,for all depth as per DRS-23.4.1 |
| 57 | Supplying, assembling, lowering and fixing in vertical position in bore well 32mm cpvc pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. DSR No. 18.7.4 |
| 58 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of as per lucknow sor no-23.13.1: |
| 59 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.DSR no-23.14.1: |
| 60 | Providing and fixing Ball plug /Bottom plug of required dia to the bottom of pipe assembly of tube well as per lucknow sor -23.15.1 |
| 61 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.as per Lucknow DSR 23.8 |
| 62 | Development of tube well in accordance with IS: 2800 (part 1) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \"V\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tube well, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge as per Lucknow DSR No-23.12 |
| 63 | Wiring points for light with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. SI No. 138 (C) |
| 64 | Wiring point for Same as item No.(1) but for5amp plug point with piano type switch and socket etc. SI No. 141( C) |
| 65 | Supply and wiring of submain 2 number 2.5 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 1.5 sqmm FR PVC insulated multistranded copper conductor SI No. 1307(C) |
| 66 | Supply and wiring of submain with two number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in20mm dia heavy duty (2mm thick ) PVC conduitpartly concealed in wall and partly laid in slab along with reinforcement befor concreting with one number 2.5 Sqmm FR PVC Multistand copper earth contunity wire including colour wash etc. complete in all respects. SI No. 221(C) |
| 67 | Supply and wiring of submain with two number 1.5 sq. mm. FR PVC insulated 1100 V grade multi strand single core copper conductor cable in 20 mm dia. heavy duty (2 mm thick) PVC conduit with 1 number 1.5 sq. mm. FR PVC insulated 1100 V grade multi strand core copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect. SI No. 1313(C). |
| 68 | Supply and fixing of switch box made up of 16 SWG (1.5 mm ) thick M.S. sheet of Following size duly painted with red oxide primer and flushed in wall including cutting of brick work fixing it to the level with cement sand mortar,including matching colour wash supply of all material, labour and T & P etc. required for proper completion of the work.asdirected at site by the engineer in charge. SI No. 160 |
| 69 | Supply and fixing of 6 Amp to 32 Amp MCB(10KA)C Curve 5- 32 amps. As per s.i. no-1002 Cat. A |
| 70 | Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work. 600x480x200 mm. size as per s.i. no-1141B |
| 71 | Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. or as directed by the Engineer-Incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc.as per S.I. NO-501a6 sqmm 2 core |
| 72 | Supply and fixing of information sign board including letter writing and painting etcfor compelition of work |
| 73 | Add 18% GST |
