|
| 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 2 | Removing dry or oil bound distemper water proofing cement paint and the like y scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc complete . |
| 3 | Dismantling of cement concrete or brick or granolithic floors I/C base concrete and I/C stacking of dismanted materials as directed by engineer in charge within a distance of 60 meters. |
| 4 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos cement sheet |
| 5 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres |
| 6 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below |
| 7 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 8 | Dismantling W.C Pan of all sizes including disposal of dismantles materilas including malba all complete as per direction of Engineer -in- charge. |
| 9 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1stquality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4(1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 10 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 11 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 12 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m* |
| 13 | Providing ridges or hips of width 60cm overall wridth plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I limpet and bitumen washers complete..63mm thick with zinc coated not less than 275gm/sqm |
| 14 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece |
| 15 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 16 | Supply & fixing of 24 gauge alluminium sheet on tiolet door shutters bottom I/C fixing with aluminium graves labour etc I/C labour T&P required for proper completion of wirk |
| 17 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. |
| 18 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 19 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with : 4.0 mm thick glass panes. |
| 20 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 150 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 21 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 150 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) |
| 22 | 12 mm thick cement plaster of mix 1:6 (1 cement: 6 coarse sand) |
| 23 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 24 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterrior primer applied @ 0.90 ltr/10 sqm) |
| 25 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade and colour: New work (Two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/ltr (Interrior) Two coats |
| 26 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 27 | E/W in filling or in embankmentin foundatrion or plinth in ordinary soil including lift up to 1.5m and lead up to 30m and including filling waqtering ramming of excavated earth including cartage earth up to 3km distance. |
| 28 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 29 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 30 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 150 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 31 | construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface. Mixing by mix in place method with rotavator at OMC and compacting with smooth wheel roller to achieve the desired density complete. |
| 32 | Providing laying, spreading and compacting graded stone aggregates two wet mixmacadem specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase/basecourse on well prepared surface an campacting with vibratory roller to achieve the desire density !!! as per technical specification clause 406 |
| 33 | Providing and laying of Rubber amoulded Reflective Zig-Zag 80mm thick of precost compressed CC passing minium 30 mpa compressive strength- ISI Marked concrete block pavements having thickness 80 mm as per technical specification clause 1504 Grey colour |
| 34 | Providing and laying of 2.50 cm thick PCC 1:2:4 ( Without Base Concrete) With cement coarse sand and 20 mm gauge stone grit |
| 35 | Electriefication workWiring for light piont/ fan pint/ ehaust fan pint/ call bell pint with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVCconduct, with modular switch, modular plate,uitable GI box and earthing the pint with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc, as required. |
| 36 | Supplying and fixing brss batten/ angle holder including connecdtion etc as required. |
| 37 | Supply & fixing following way horizontal type three pole and neutral sheet steel MCB distrbution board, 415 v, on surface/recess, complete with tinned copper bus bar, interconnections, power painted including earthing etc. as required 4 way (4+12) Double door |
| 38 | Supplying and fixing 5A to 32A rating 240/415 V, 10KA \"C\" curve miniature circuit breaket suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc. as required single pole |
| 39 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surcface/ recessed medium class PVC conduict as requierd 2x1.5 sqm mm+ 1x1.5 ssq. Mm earth wire. |
| 40 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess. Including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch connections etc as required. |
| 41 | Supply, installation Testing and commisioning of 1200mm sweep, BEE 5 star rated Ceiling fan with fan with BLDC motor class of insulation B , 3 nos blades 30cm long down fod 2 nos conopies in all complete suitable for 230 V 50 Hz single phade AC supply earetrhing etc complete as required. |
| 42 | Water supply & Sanitary workProviding and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm dia |
| 43 | Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 44 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap. |
| 45 | Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete semi rigid pipe of 32mm dia |
| 46 | Providing & fixing PVC pipes conforming to IS make witkinh pressure 6 kg/cm2 including testing labour T&P and all complete fittings 75mm dia |
| 47 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes. |
| 48 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes. |
| 49 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: 15 mm nominal bore. |
| 50 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : 15mm nominal bore. |
| 51 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
