Jhotwara Civil Work - Kota Stone Flooring Making Work Of Installation Of Bot Plant At Rc Jhotwara, Providing And Laying In Position Cement Concrete Including Curing, Compaction Etc. Complete In Specified Grade Excluding The Cost Of Centering And Shutterin, Jaipur-Rajasthan

Jhotwara Civil Work - Kota stone flooring making work of installation of BOT plant at RC Jhotwara, Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering plinth level. All work up to M10 grade Nominal Mix 1: 2: 4 (1 cement: 2 stone aggregate 20mm nominal size). coarse sand 4 graded Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement: 4 coarse sand) For area of each slab from 901 to 2000 Sq. Cm : Random rubble dry stone Kharanja under floor. Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. 1:3: 6 or richer mix. Colour paint work of installation of BOT plant at RC Jhotwara Colour washing of all shades to give an even shade including all scaffolding : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches by sandla/loi. (only for colour changing). Distempering with dry distemper of approved brand and shade (two or more coats) and of required shade on new work, over and including, priming coat of whiting to give an even shade including all scaffolding Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : One or more coats on old work. Roof water proofing treatment work of installation of BOT plant at RC Jhotwara Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. Bird net work (Iron frame with jali) of installation of BOT plant at RC Jhotwara Providing and fixing welded mesh/expanded metal mesh in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, crews, clips etc. complete (excluding frame work) of size. Welded mesh 50 mmx 50 mm x 2.1 mm Door opening & rolling shutter work of installation of BOT plant at RC Jhotwara Supplying and fixing rolling shutters of approved make, made of 80 x 1.25mm. M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including cost of spring hooks, providing and fixing necessary 25.3cm long wire springs grade No. 2 and M.S. top cover 1.25mm thick for rolling shutters as per design & IS 6248-1979. (Clear openable area to be measured for payment). Providing & fixing ball bearing for rolling shutters Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 16.80 Sqm in the area. Removing of existing cabin work of installation of BOT plant at RC Jhotwara Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead : Above 2.52 Sqm to 3.84 SqmPlate form for PVC tank work (5x10x10) of installation of BOT plant at RC Jhotwara Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete. P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 5000 litres capacity.

Refer document

Refer document

INR 9.84 Lakhs /-