Tender For P/F Modular Kitchen Shelf, Almirah And Door At Flat No. 7, Type Iii, Sdc, University Of Delhi., delhi-Delhi

Tender For P/F Modular Kitchen Shelf, Almirah And Door At Flat No. 7, Type Iii, Sdc, University Of Delhi.; 1 Providing woodworkin frames of doors,windows,clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood 2 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 3 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 4 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10 mm 5 Providing and fixing bright finished brass handles with screws etc. complete:125 mm 6 Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge. 7 Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensilbasket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) 8 Providing and fixing a cupboard with maximum depth of 450mm, constructed using 18mm thick HDHMR board (Action Tesa, Green Ply. Century) for the shelves, sides, top, bottom, and shutters.lThe back panel shall be made of 5.5mm thick ply(Action Tesa, Green Ply. Century) and laminated with 1mm thick sunmica (merino make) as required.The work includes all necessary fittings and fixtures, completed as per direction of Engineer-in-charge. ( Front area measurement will be made for face / front of cupboard taken for payment). 9 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Refer document

Refer document

INR 1.08 Lakhs /-