-Hss Ps Rough End Mil,Super End Mill And Slot Drill Hss Ps Rough End Mil,Super End Mill And Slot Drill , Procurement Of Tools , Hss Ps Roughingend Mill Dia 16Mm -- Hss M35 Parallel Shank Heavy Duty End Mills, Type A, Rh Cutting, Rh Helix, Sinosoidal Chip Breaker Grooves, As Per Is:6353-1991, Dia : 16Mm , Hss Ps Rough End Mill Dia 18Mm -- Hss M42 Parallel Shank Heavy Duty End Mills, Type A, Rh Cutting, Rh Helix, Sinosoidal Chip Breaker Grooves, Except Size All Other Details As Per Is:6353-1991, D(Dia) X D1 (Shank Dia) X L (Fl) X L1(Oal), 18 X 16 X 20 X 85Mm , Hss Ps Rough End Mill Dia 20Mm -- Hss M35 Parallel Shank Heavy Duty Long Series End Mills, Type A, Rh Cutting, Rh Helix, Sinosoidal Chip Breaker Grooves, As Per Is:6353-1991, Dia : 20Mm , Hss Ps Rough End Mill Dia 25Mm -- Hss M35 Parallel Shank Heavy Duty End Mills, Type A, Rh Cutting, Rh Helix, Sinosoidal Chip Breaker Grooves, As Per Is:6353-1991, Dia : 25Mm , Hss Ps Rough End Mill Dia 28Mm -- Hss M42 Parallel Shank Heavy Duty End Mills, Type A, Rh Cutting, Rh Helix, Sinosoidal Chip Breaker Grooves, Except Size All Other Details As Per Is:6353-1991, D(Dia) X D1 (Shank Dia) X L (Fl) X L1(Oal), 28 X 25 X 30 X 105Mm , Hss Ps Rough End Mill Dia 32Mm -- Hss M35 Parallel Shank Heavy Duty End Mills, Type A, Rh Cutting, Rh Helix, Sinosoidal Chip Breaker Grooves, As Per Is:6353-1991, Dia X Shank Dia X Shank Dia X Fl X Oal 32 X 25 X 53 X 133Mm , Hss Ps Rough End Mill Dia 40Mm -- Hss M35 Parallel Shank Heavy Duty End Mills, Type A, Rh Cutting, Rh Helix, Sinosoidal Chip Breaker Grooves, Except Size All Other Details As Per Is:6353-1991, D(Dia) X D1 (Shank Dia) X L (Fl) X L1(Oal), 40 X 32 X 63 X 155Mm , Hss Ps Long Rough End Mill Dia 16Mm -- Hss M35 Parallel Shank Heavy Duty Long Series End Mills, Type A, Rh Cutting, Rh Helix, Sinosoidal Chip Breaker Grooves, As Per Is:6353-1991, Dia : 16Mm , Hss Ps Long Rough End Mill Dia 18Mm -- Hss M35 Parallel Shank Heavy Duty Long Series End Mills, Type A, Rh Cutting, Rh Helix, Sinosoidal Chip Breaker Grooves, Except Size All Other Details As Per Is:6353-1991, D(Dia) X D1 (Shank Dia) X L (Fl) X L1(Oal), 18 X 16 X 63 X 123Mm , Hss Ps Long Rough End Mill Dia 20Mm -- Hss M35 Parallel Shank Heavy Duty Long Series End Mills, Type A, Rh Cutting, Rh Helix, Sinosoidal Chip Breaker Grooves, Except Size All Other Details As Per Is:6353-1991, D(Dia) X D1 (Shank Dia) X L (Fl) X L1(Oal), 20 X 20 X 75 X 141Mm , Hss Ps Long Rough End Mill Dia 25Mm -- Hss M35 Parallel Shank Heavy Duty Long Series End Mills, Type A, Rh Cutting, Rh Helix, Sinosoidal Chip Breaker Grooves, As Per Is:6353-1991, Dia : 25Mm , Hss Ps Long Rough End Mill Dia 26Mm -- Hss M42 Parallel Shank Heavy Duty Long Series End Mills, Type A, Rh Cutting, Rh Helix, Sinosoidal Chip Breaker Grooves, Except Size All Other Details As Per Is:6353-1991, D(Dia) X D1 (Shank Dia) X L (Fl) X L1(Oal), 26 X 25 X 110 X 225Mm , Hss Ps Long Rough End Mill Dia 32Mm -- Hss M35 Parallel Shank Heavy Duty Long Series End Mills, Type A, Rh Cutting, Rh Helix, Sinosoidal Chip Breaker Grooves, Except Size All Other Details As Per Is:6353-1991, D(Dia) X D1 (Shank Dia) X L (Fl) X L1(Oal), 32 X 25 X 106 X 186Mm , Hss Ps Long Rough End Mill Dia 36Mm -- Hss M35 Parallel Shank Heavy Duty Long Series End Mills, Type A, Rh Cutting, Rh Helix, Sinosoidal Chip Breaker Grooves, As Per Is:6353-1991, Dia: 36Mm , Hss Ps Long Rough End Mill Dia 40Mm -- Hss M42 Parallel Shank Heavy Duty Long Series End Mills, Type A, Rh Cutting, Rh Helix, Sinosoidal Chip Breaker Grooves, Except Size All Other Details As Per Is:6353-1991, D(Dia) X D1 (Shank Dia) X L (Fl) X L1(Oal), 40 X 32 X 125 X 200Mm , Hss Ps Super End Mill Dia 7Mm -- Hss T42 Super End Mill Standars Series As Per Bhel Drg.No:4-Tr-0450, Dia : 7Mm , Hss Ps Super End Mill Dia 8Mm -- Hss T42 Super End Mill Standars Series As Per Bhel Drg.No:4-Tr-0450, Dia : 8Mm , Hss Ps Super End Mill Dia 10Mm -- Hss T42 Super End Mill Standars Series As Per Bhel Drg.No:4-Tr-0450, Dia : 10Mm , Hss Ps Super End Mill Dia 12Mm -- Hss T42 Super End Mill Standard Series As Per Bhel Drg.No:4-Tr-0450, Dia : 12Mm , Hss Ps Super End Mill Dia 13Mm -- Hss T42 Super End Mill Standars Series As Per Bhel Drg.No:4-Tr-0450, Dia : 13Mm , Hss Ps Super End Mill Dia 14Mm -- Hss T42 Super End Mill Standars Series As Per Bhel Drg.No:4-Tr-0450, Dia : 14Mm , Hss Ps Super End Mill Dia 16Mm -- Hss T42 Super End Mill Standars Series As Per Bhel Drg.No:4-Tr-0450, Dia : 16Mm , Hss Ps Super End Mill Dia 18Mm -- Hss T42 Super End Mill Standars Series As Per Bhel Drg.No:4-Tr-0450, Dia : 18Mm , Hss Ps Super End Mill Dia 20Mm -- Hss T42 Super End Mill Standars Series As Per Bhel Drg.No:4-Tr-0450, Dia : 20Mm , Hss Ps Super End Mill Dia 25Mm -- Hss T42 Super End Mill Standars Series As Per Bhel Drg.No:4-Tr-0450, Dia : 25Mm , Hss Ps Super End Mill Dia 32Mm -- Hss T42 Super End Mill Standars Series As Per Bhel Drg.No:4-Tr-0450, Dia : 32Mm , Hss Ps Super End Mill Dia 36Mm -- Hss T42 Super End Mill Standars Series As Per Bhel Drg.No:4-Tr-0450, Dia : 36Mm , Hss Ps Super End Mill Dia 40Mm -- Hss T42 Super End Mill Standars Series As Per Bhel Drg.No:4-Tr-0450, Dia : 40Mm , Hss Slot Drill Dia 3Mm -- Hss M2 Slot Drills With Parallel Shank Type Awith Flat Face, Straight Flutes, Rh Cutting, Tool Type H, Except Size All Other Details As Per Is:6352-1971, D(Dia) X D1(Shank Dia), 3 X 6Mm , Hss Slot Drill Dia 4Mm -- Hss M2 Slot Drills With Parallel Shank Type Bwith Flat Face, Straight Flutes, Rh Cutting, Tool Type H, Except Size All Other Details As Per Is:6352-1971, D(Dia) X D1(Shank Dia), 4 X 6Mm , Hss Slot Drill Dia 5Mm -- Hss M2 Slot Drills With Parallel Shank Type Awith Flat Face, Straight Flutes, Rh Cutting, Tool Type H, Except Size All Other Details As Per Is:6352-1971, D(Dia) X D1(Shank Dia), 5 X 6Mm , Hss Slot Drill Dia 6Mm -- Hss M2 Slot Drills With Parallel Shank Type Bwith Flat Face, Straight Flutes, Rh Cutting, Tool Type H, Except Shank All Other Details As Per Is:6352-1971, Dia(D) X Sahnk Dia(D1) 6 X 6Mm , Hss Slot Drill Dia 8Mm -- Hss M2 Slot Drills With Parallel Shank Type Bwith Flat Face, Straight Flutes, Rh Cutting, Tool Type H, As Per Is:6352-1971, Dia: 8Mm , Hss Slot Drill Dia 9Mm -- Hss M2 Slot Drills With Parallel Shank Type Awith Flat Face, Straight Flutes, Rh Cutting, Tool Type H, As Per Is:6352-1971, Dia: 9Mm , Hss Slot Drill Dia 10Mm -- Hss M2 Slot Drills With Parallel Shank Type Bwith Flat Face, Straight Flutes, Rh Cutting, Tool Type H, As Per Is:6352-1971, Dia: 10Mm , Hss Slot Drill Dia 12Mm -- Hss M2 Slot Drills With Parallel Shank Type Bwith Flat Face, Straight Flutes, Rh Cutting, Tool Type H, Except Size All Other Details As Per Is:6352-1971, D(Dia) X D1(Shank Dia), 12 X 12Mm , Hss Slot Drill Dia 14Mm -- Hss M2 Slot Drills With Parallel Shank Type Bwith Flat Face, Straight Flutes, Rh Cutting, Tool Type H, Except Size All Other Details As Per Is:6352-1971, D(Dia) X D1(Shank Dia), 14 X 12Mm , Hss Slot Drill Dia 16Mm -- Hss M2 Slot Drills With Parallel Shank Type Bwith Flat Face, Straight Flutes, Rh Cutting, Tool Type H, As Per Is:6352-1971, Dia: 16Mm , Hss Slot Drill Dia 18Mm -- Hss M2 Slot Drills With Parallel Shank Type Bwith Flat Face, Straight Flutes, Rh Cutting, Tool Type H, As Per Is:6352-1971, Dia: 18Mm , Hss Slot Drill Dia 20Mm -- Hss M2 Slot Drills With Parallel Shank Type Bwith Flat Face, Straight Flutes, Rh Cutting, Tool Type H, As Per Is:6352-1971, Dia: 20Mm , Hss Slot Drill Dia 22Mm -- Hss M2 Slot Drills With Parallel Shank Type Bwith Flat Face, Straight Flutes, Rh Cutting, Tool Type H, As Per Is:6352-1971, Dia: 22Mm , Hss Slot Drill Dia 30Mm -- Hss M2 Slot Drills With Parallel Shank Type Awith Flat Face, Straight Flutes, Rh Cutting, Tool Type H, Except Size All Other Details As Per Is:6352-1971, D(Dia) X D1(Shank Dia), 30 X 25Mm , Hss Slot Drill Dia 32Mm -- Hss M2 Slot Drills With Parallel Shank Type Bwith Flat Face, Straight Flutes, Rh Cutting, Tool Type H, As Per Is:6352-1971, Dia: 32Mm , Hss Slot Drill Dia 36Mm -- Hss M2 Slot Drills With Parallel Shank Type Bwith Flat Face, Straight Flutes, Rh Cutting, Tool Type H, Except Size All Other Details As Per Is:6352-1971, D(Dia) X D1(Shank Dia), 36 X 25Mm , Hss Ts Tngd End Long Endmil Dia 50X325mm -- Hss M2 Morse Taper Shank End Mills Type A, Tanged End Long Series Tool Type N, Rh Cutting, Rh Helical Flutes, As Per Is:6354-1971, With Cotter Slots On The Shank As Per Is:13776-1993, D(Dia) Xmorse Taper, 50 X Mt5 , Hss Ts Tngd End Long Endmil Dia 63X450mm -- Hss M42 Morse Taper Shank End Mills Type A, Long Series Tool Type N, Rh Cutting, Rh Helical Flutes, Except Size All Other Details As Per Is:6354-1971, With Cotter Slots On The Shank As Per Is:13776-1993, D X L X L1 X Taper, 63 X 250 X 450 X Mt5 , Hss Ts Tngd Rough Endmil Dia 40X265mm -- Hss M42 Taper Shank Type A Heavy Duty Rough End Mill, Rh Cuuting, Rh Helical Flutes, Sinosoidal Form With Chip Breaker Grooves In Ground Relieved Other Details As Per Is:6354-1971 With Cotter Slots On The Shank As Per Is:13776-1993, Dia X Morse Taper, 40 X Mt4. , Hss Shell End Mill Dia 100Mm -- Hss M42 Shell End Mill As Per Is:6257-1982, Dia : 100Mm , Hss Shell End Mill Dia 125Mm -- Hss M42 Shell End Mill As Per Is:6257-1982, Dia : 125Mm , Hss Rough Shell End Mill Dia 100Mm -- Hss M2 Shell End Mill With Profile R, Chip Breaker Grooves Radially Ground And Relieved As Per Is:6257-1982, Dia : 100Mm , Hss Rough Shell End Mill Dia 125Mm -- Hss M2 Shell End Mill With Profile R, Chip Breaker Grooves Radially Ground And Relieved As Per Is:6257-1982, Dia : 125Mm
