Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-07-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-07-2025 |
| Sl. No. | Item Description |
| 1 | Taking down existing chowkats or frames of any description and in any position exceeding 1.5 sqm n-exc 4.0 sqm each with shutter (w/o taking off shutter from the frames) complete all as specified and directed. |
| 2 | Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from frames), complete all as specified. |
| 3 | Taking down shutters of any description n. exc 1 Sqm each complete all as specified and directed. |
| 4 | Taking down shutters of any description and in any positionexceeding 1 sqm & not exceeding 2 sqm each complete all as specified and directed. |
| 5 | Resecuring or easing & adjusting of shutters without taking down of any description exc 1.0 Sqm each but n. exc 2.0 Sqm each complete all as specified and directed. |
| 6 | Resecuring or easing & adjusting of shutters without taking down of any description n. exc 1.0 Sqm each complete all as specified and directed. |
| 7 | S&F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 8 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 9 | M & L forPowder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 10 | M & L forPowder coated (minimum thickness of powder coating 50 micron) aluminium sliding windowwith aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware i.e.. handles, barrel tower bolts, hinges etc, powder coatedaluminium snap beading, screws etc. complete all as specified and directed Note : Panel filling i.e.. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately. |
| 11 | M & L forPowder coated (minimum thickness of powder coating 50micron) aluminiumwindow & Ventilator shutters side hung type aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware i.e.. handles, barrel tower bolts, hinges etc, powder coatedaluminium snap beading, screws etc. complete all as specified and directed Note : Panel filling i.e.. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately. |
| 12 | S&F 4.8 mm thick tinted glassof selected qualityin square not exceeding 0.5 sqm in each pane, fixed to aluminiumframe with and including suitablerubber beadingcomplete all as specified and directed |
| 13 | S & F 3mm thick figured glass ,pin head type and glazing with oil putty in square n.exc 0.5 Sqm in each pane etc all as specified. |
| 14 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with steel wire staples, complete all as specified and directed. |
| 15 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directedincluding taking down old one. |
| 16 | S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen & Cabinets. |
| 17 | S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbmhaving good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2and esistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen and Cabinets. |
| 18 | S&F factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS-1003(Part - I) kiln seasoned and chemically pressure treated (35 mm thick with 2nd class HW rail and style) complete all as specified and directed. |
| 19 | S&F factory made 2nd class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats |
| 20 | S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides compete all as directed. |
| 21 | S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 45 x 70 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and nontoxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr incharge. Note: -For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made”. |
| 22 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headedcounter sunk S.S screws, all as per direction of EngineerIn- Charge.(Note: stainless steel butt hinges shall be paid separately under relevant item). |
| 23 | S&F double rebated, Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr incharge.Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 24 | S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 50x 100 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr incharge.Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 25 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges shall be paid separately under relevant item). |
| 26 | Providing 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof,fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardwares shouldbe fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer\"s specification & drawings.” Note: Fixture/fittings shall be measured & paid under relevant item |
| 27 | S&F Stainless steel 304 grade dash fastenersas in hold fast min length should not less than 125 mm of dia 12mm complete all as specified and as directed. |
| 28 | S&F 100 mm long(size) butt hinges, stainless steel, complete all as specified. |
| 29 | S&F in repair 75 mm long L Bihari concealed type hydrauilc hinges incl stainless screw complete all asspecified. |
| 30 | S&F in Soft closing ball bearing telescopic channel of size 20 inch long fixed with screws in cupboards incl all fittings complete all as spd and directed by Engr in charge.Note : Runner/ Channel should be SS 304 grade and load capacity should not be less than 45 kgs |
| 31 | S & F 150mm size double action spring, hinge, mild steel with steel wire spring, stove enamelled black, complete all as specified. |
| 32 | S&F in repair 300mm long, stainless steel of AISI 304 grade,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed, complete all as specified and directed. |
| 33 | S&F in repair 250mm long, stainless steel of AISI 304 grade,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed, complete all as specified and directed. |
| 34 | S&F in repair 150mm long stainless steel barrel tower boltofextruded section, complete all as specified. |
| 35 | S&F in repair 200mm long stainless steel barrel tower boltof extruded section, complete all as specified. |
| 36 | S&F in repair 200mm size stainless steel AISI 304 grade fancy type handlecomplete all as specified and directed. |
| 37 | S&F in repair stainless steel AISI 304 grade floor door stopper with hard drawn steel spring 140mm long complete all as specified and directed. |
| 38 | S & Fin repair aluminium anodised floor door stopper 140 mm long |
| 39 | S&F in repair100mm long, extruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts , screw and washer of mild steel bright finished , complte all as specified. |
| 40 | S&F in repair mild steel 150mm ordinary rat tail , rod pattern springs including roller and roller plate complete all as specified |
| 41 | S&F in repair MS roller with \"C\" shape staple, chromium plated for 5.5mm thick sheet glass complete allas specified |
| 42 | S&F in repair 300 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed. |
| 43 | S&Fin repair 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 44 | S&F in repair Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed . |
| 45 | Hacking out old broken glass (any thickness size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clip and providing and fixing new ones complete all as specified and directed. |
| 46 | S&F sheet glass 3 mm thick ordinary quality and glazing with oil putty or wooden beads in square, rectangle n.exc 0.5 Sqm in each pan all as specified and as directed. |
| 47 | M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 48 | Dismantling wrought iron or mild steel work of any description not otherwise provided forcomplete all as specified and as directed |
| 49 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as directed. |
| 50 | S & F in repair Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified |
| 51 | M&L for PCC (1:2:4)type B-0 (using12.5 mm graded stone aggregate) as in holdfast block etc complete all as specified and directed. |
| 52 | M&L preparation of new or previously untreatedsteel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 53 | Taking down cement plaster of any description and in any position of brick or stone wall/concrete surfaces on walls ,ceiling etc including raking out joints ,hacking for key scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed |
| 54 | M&Lfor rendering 10 mm thickin CM (1:6) on fair faces of brick work or concrete surfaces/stone masonryand finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 55 | M&L for preparation of the newly plastered surfacesof walls & applying two coatsdistemper oil- emulsion , white or tintedover a coat of primer surfaces of wall complete all as specified and directed. |
| 56 | M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 57 | M&L for preparation of the newly plastered surfacesof ceiling & applying3 coats of white wash on ceiling surfaces complete all as specified and directed. |
| 58 | M&L rendering 10 mm thick in CM 1:4 on brick/concrete wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed . |
| 59 | M&L Providing and applying cement base plaster of Paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as directed. |
| 60 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 61 | Supply onlywater proofing compound (WPC- ISI Mark) |
| 62 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar |
| 63 | Machine cut kota stone slab flooring 18-22mm thick over 15 mm thick screed bed or bedding layer of cement mortar (1:6)laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 64 | M&L for machine cut kota stone slab 18-22 mm thick as in riser/skirtinglaid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including, grinding, rubbing and polishing over 10 mm thick bedding in cement mortar(1:4) complete all as specified and directed. |
| 65 | M&L for 16-18mm thick Udaipurgreen marble laid over and including 15mm thick screed bed in CM 1: 6 as in floors /treads/risers of steps in one piece including cutting, jointing, moulding and granite polishing, laid in designed complete all as specited and directed |
| 66 | Dismantling asbestos cement corrugated or semi corrugated sheet in roof coverings complete all as directed. |
| 67 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws all as specified and as directed |
| 68 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as directed |
| 69 | S & F for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 all as specified and as directed. |
| 70 | M&L for Glazed ceramic tiles in vertical surface 600x 300x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar (1:3) complete all as specified and as directed. |
| 71 | M&L for coloured ceramic tilesof size 400x400x 7 to 8mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm thick screed bed in CM 1:4 complete all as directed. |
| 72 | Taking up or down 15 mm dia GI tubing and connections including cleaning for re-fixing or removal to store in any position upto G+5 storey bldg complete all as specified. |
| 73 | S&F 15 mm dia GI tubing medium grade with all fitting and fixed to wall and ceiling or laid in floors etc as in horizontal or vertical surfaces upto G+5 storey bldg complete, all as specified. |
| 74 | Taking down steel window and fixing in same opening after making serviceable by welding , providing hinges and peg stay, PCC for holdfast etc including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete and making good the disturbed surface as directed by Engr-in-charge. |
| 75 | M & L forpowder coated aluminium grill of design No DG-104, 7.5mm thick sections of deco grill or of equivalent approved makewith 1 mm thick \"F\" sections of suitable size complete all as specified and directed by Engr in Charge. |
| 76 | S&F min wall thickness 1.65 mm Stainless steel drapery curtain rods gold or antique silver 25 mm nominal dia of approved quality with two number decorative brackets design as approved fixed in brick/concrete wall with same finished knobs/latto on each end of curtain rod incl taking down old pelmet complete all as required and directed. |
| 77 | Cutting shrubs, wild growth, plants not exc 30 cm girth grown on permanent structures and removingsame from roots and stopping the recurrence by injecting herbicide Glyphosphate 4+solution (04 % concentrate) into plant root to eliminate further growth. Application shall be as per manufacturer intructions. The disturbed area shall be repaired with PCC (1:2:4) Type B0 mix and surface finished even and smooth in cm 1:4 incl applying two coats of matching finish of adjacent area.Minimum plant in each block is 10 Numbers. |
| 78 | Dismantling of brick tiles or terracing tiles single layer on roof and removing the rubbish outside complex (MOD land),incl removal of vagitation if any complete all as specified. |
| 79 | Demolition of mud in roof, any thickness, including mud plastering and mud phuska under brick tiles at any situation and height, complete all as specified. |
| 80 | Roughening surfaces of old concretefloor by picking, sweeping clean andwashing down with water to removedust, etc |
| 81 | M &L for Brushing neat cement slurry with 3 Kg of cement per square metre complete all as specified and directed . |
| 82 | M&L for cement concrete 1:2:4 type B1 (using 12.5mm graded stone aggregate) on roof paddingsurface finished even and smooth without using extra cement complete all as spd & directed. |
| 83 | M&L for rendering 10mm thick on top of roof concrete in cement mortar 1:4 with water proofing compound at the rate of 3% by weight of cement to have a smooth surface for laying of water proofing membrane. Note: Water proofing compound will be measured and paid seprately. |
| 84 | M&L for APP based polymeric membrane plain finish minimum weighting 3 kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) over one coat of 85/25 bitumen @1.2 kg/sqm and paste the membrane with torching method and again apply a coat of 85/25 bitumen @ 1.2 kg/sqm at overlapping joints |
| 85 | Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1,complete, including providing skirting upto 150 mm height along the parapet walls in the same manner all as specified and directed. |
| 86 | M & L Cement concrete 1:2:4 type B0 (using 12.5 mm gradedstone aggregate) as in roof kerbs or mud stops etc including weathering slightly rounded or chamfered edges, finished even and smooth withoutusing extra cement complete all as specified. |
| 87 | M&L cleaningsurface and applying two coats of aluminium painton roof or vertical surfaces complete all as specified and directed. |
| 88 | Taking down care fully copper/aluminium point wiring from caping/casingor conduits (light, fan, socket or power) complete incl fittings such as switches, sockets, ceiling roses, pendents, regulators, light fittings any type etc to be measured seperately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed by Engineer in charge. |
| 89 | Taking down old MCCB , TPN DBs , SPN DBs,& main switch/ enclosure box of any make and type from the site and making good surface complete all as specified and directed. |
| 90 | Taking down old submain wiring of any size, including coduit and make from the site complete all as specified. |
| 91 | Taking down old unsv light fitting of any size and make from the site and making good surface complete all as specified. |
| 92 | Material and labour for point wiring for one light point or one fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed / surface PVC conduits as suitable of site(Medium grade) of size not less than 20 mm dia incl proper colour coding Phase -red/yellow/blue, neutral- black and earth green including making good disturbed surfaces with existing colour coding matchingall as directed with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, 3 mm thick hylem sheet cover for terminal boxespainted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories forPVC insulated & unsheathed cable as in earth wire connected to common earth dolly completeall as specified and directed. |
| 93 | All as per item No 92 above but one light/fanpoint controlled by one switch. |
| 94 | All as per item No 92 above but One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board |
| 95 | All as per item No 92 above butOne 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board. |
| 96 | All as per item No 92 above butOne bell point controlled by one bell push. |
| 97 | All as per item No 92 above but One light point controlled by two Nos two way switches |
| 98 | All as per item No.92 above but point wiring with two single core 4.0 sqmm size cables and one 4.0 sqmm green colour cable as earth continuity conductor for one 6 pin 15 Amps socket out let on independent board. |
| 99 | M&L switch piano flush type 5 Amp SP one wayISI marked complete all as specified. Make : Havells/Legrand/ Crabtree/Anchor |
| 100 | M&L switch piano flush type 5 Amp SP two way. |
| 101 | M&L switch piano flush type 15 Amp SP one wayISI marked complete all as specified. |
| 102 | M&L bell push,flush type,5 ampISI marked complete all as specified. |
| 103 | M&L socket outlet 5 pin 5 Amp flush typeISI marked complete all as specified. |
| 104 | M&L socket outlet 2 in 1,3 pin 5/15 AmpsISI marked complete all as specified. |
| 105 | M&L ceiling rose 3 phase PVCpolycorbonate,isolated body. complete all as specified. |
| 106 | S & F electronic fan regulator 5 stepISI markedconnecting complete all as specified. |
| 107 | M&L bell electric (ding dong) 230 volt, SPall as specified and directed. |
| 108 | M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including in and including concealed / surface PVC conduits as suitable of site Medium gradeofISI Marked not less than 20 mm dia and all conduit accessories concealed in wall on surface in ceiling/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated modular metal flush box, concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc, complete all as specified. |
| 109 | All as per item No 103 above but one light /Ceiling fan/exhaust fan point controlled by one switch. |
| 110 | All as per item No 103 above but one bell point controlled by one bell push. |
| 111 | All as per item No 103 above but one 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board. |
| 112 | All as per item No 103 above but one 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board |
| 113 | All as per item No 103 above but one light point controlled by two Nos two way switches |
| 114 | M&Lpoint wiring with PVC unsheathed multi stranded copper conductorcable 4.0 sqmm FRLS 1100 Volts inand including concealed / surface PVC conduits as suitable of site(Medium grade) ofISI Marked not less than 20 mm dia in new M S steel terminal boxes modular including one run of using 4.0 sqmm FRLS 1100 Volts copper conductor cableas earth continuityconnected to common earthfor one 15 A switch socket power point, all as specified |
| 115 | M&L switch Modular type 6 Amps one way ISI marked 230V AC complete all as specified. |
| 116 | M&L Modular socket outlet 5 pin 6 Amp socket 2 moduleISI marked complete all as specified. |
| 117 | M&L switch Modular type 16 Amps one wayISI marked 230V AC complete all as specified. |
| 118 | M&L Modular socket outlet 5 pin 6/16Amp universal socket 2 module complete all as specified. |
| 119 | M&L switch bell push Modular type 6 Amps 1W-1 module, ISI marked 230V AC complete all as specified. |
| 120 | M&Lswitch modular type 6amp SP two wayISI marked complete all as specified. |
| 121 | Supply & FixModular five stepped type electronic fanregulator 2 moduleISI marked230V AC complete all as specified. |
| 122 | M&L for submain wiring with two single core PVCinsulated FRLS 1100 Volts unseathed stranded copper conductor cable 4 Sqmm in and including in and including concealed / surface PVC conduits as suitable of site(Medium grade)not less than 20 mm dia,proper colour coding Phase -red/yellow/blue, neutral- black and earth green including making good disturbed surfaces with existing colour coding matching for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 4.0 Sqmm size stranded conductor as earthwire. |
| 123 | M&L for submain wiring with two single core PVCinsulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including concealed / surface PVC conduits as suitable of site(Medium grade) ofnot less than 20 mm dia, proper colour coding Phase -red/yellow/blue, neutral- black and earth green including making good disturbed surfaces with existing colour coding matching for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of6.0 Sqmm size stranded conductor as earthwire. |
| 124 | M&L for submain wiring with four run of singlecore PVCinsulated FRLS 1100 Volts unseathed stranded copper conductor cable 10 Sqmm in and including concealed / surface PVC conduits as suitable of site(Medium grade) ofnot less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed one run of stranded copper conductor cable of 10 Sqmm size stranded conductor as earthwire. Note:- Four runof main wirePVC insulated FRLS 1100 volts unsheathed stranded copper conductorand one run of earth wire with one run of PVC conduit will be measured and paid in one length. |
| 125 | Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts with lifetime of 25000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.90, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1,Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 110 Lumens/watt andincluding connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete. |
| 126 | Supply and fix LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 900 lm system lumen output with life time of 25000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.90, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, system efficacy at luminarie level > 110 Lumens/watt andincluding connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete. |
| 127 | Supply and fix 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 100 lm/W with a life class of 25,000 burning hours at L70 criteria,Power Factor >0.90, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmmcopper conductor flexible wire fixed complete. |
| 128 | S& F in replacement recessed mounting LED FLAT panel 2\"x2\" made of crca sheet steel duly power coated with high efficient LED and glaire free full opal diffuser , IP 20, System level efficacy of the Luminary is > 100 lm/W with a life class of 25,000 burning hours at L70 criteria,Power Factor >0.90, driver with Voltage range 150-270V,Suitable for 36 watt,230 volts ,50 Hz AC Supply, Neutral White,with electronic driver and incluiding all fixing accessories complete all as specified and directed. |
| 129 | Supply and fix 35 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover.System level efficacy of the Luminarie > 100lm/W with a life class of 25,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70.The luminaire is IP:66 protected with IK05 impact resistance.It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete. |
| 130 | S & F in replacement of decorative type wall mounted luminaire (comet) with under take poly carbonate material suitable for 1 x 12 watts LED bulb B-22 base complete all as specified and as directed. |
| 131 | S&F angle Lamp holder with metallic ring, PVC/Polycorbonate type with back plate complete. |
| 132 | S & F LED bulb 12 watts, 900 lumens output, 6500K suitable for B-22 base . |
| 133 | Refixing of Ceiling fan / exhaust fan/ fresh airincluding taking down after necessary repairs/ replacement of unserviceable/ wornout part and testing the same as per entire satisfaction of Engr-in- Charge complete all as specified and directed. Note- Spare Parts shall be measured and paid separately under relevant item of supply only. |
| 134 | M&L for opening up the winding of ceiling fan 1200 mm sweep any make and type and rewinding with super enamelled copper winding wire,wraping insulating material, insertion and varnishing well including drying complete. Teating of the ceiling fan after refixing in position to the entire satisfaction of Engr-in-Charge. |
| 135 | S&F in replacement capacitor of3.15MFD. |
| 136 | S&F in replacement gun metal bush of any size and make sutiable for ceiling fans 1200 mm compete all as specified and directed. |
| 137 | S&F in replacement ball bearing No. 6202./6203 |
| 138 | S&F in replacement worn out shaft, beyond economical repair of existing ceiling fan any make, type or size as per original one ceiling/exhaust fan complete all as directed. |
| 139 | S&F Ceiling fan blade suitable for 1200mm sweep of any make with suitable size as per site requirement complete all as specified and directed. |
| 140 | M & L for painting of ceiling fans , in situ with synthetic enamel paint by spraying including filling cavities with filler, one or more coat to achieve even and smooth surface after cleaning all dustetc.and endorsement of fan no.with black synthetic enamel paint complete all as directed. |
| 141 | S&F in replacement exhaust fan motor capacity 1/4 HP 230 volts suitable for 300 mm size exhaust fan complete all as directed. |
| 142 | Taking down carefully geysers 25/35/50 ltrs capacity opening for inspection reassembling and re-fixing in position after carrying out repairs rates included for replacement of pressed rubber gasket nuts, bolts etc complete all as directed.Note- Spare Parts such as tank, apparatus plate, outer body shall be measured and paid separately under relevant item of supply only. |
| 143 | S&F in replacement only base plate assembly (confirming to ISI ) complete for25/35 Ltrs capacity copper tankgeyser including inlet, outlet and thermostat pipe with drain plug and screws for fixing the element inclusiveofclamps for holding the elements with nut, bolts & air release valve suitable for any type/make of geysers installed at site as directed. |
| 144 | S&F in replacement of thermostat for 25/35/50 ltrs capacityof geysers complete all as directed. |
| 145 | S&F in replacement heating element of 2 KW triangular type with nut bolt washercomplete all as directed. |
| 146 | M&L forsafety pressurevalve of size 15 mm dia, ISI marked for geysers complete all as directed by Engineer-in-charge. |
| 147 | M & L chromium plated copper connection pipe 60 Cm long with two brass adopters and connecting up complete all as directed. |
| 148 | Supply only inner still tank for geysers of capacity 25/35 ltr as per existing of approved make complete all as directed. |
| 149 | Supply and fixMCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCBSPN as incomer and SP MCBs as out going with tinned copper bus bar, neutral link earth link complet. |
| 150 | M&L MCB SPN 40 Amp \"C \" curve all as directed. |
| 151 | M&L MCB SP 6 to 32 Amp \"C\" curve all as directed. |
| 152 | Supply & fix in repair factory made epoxy powder coated Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 125/160 Amp as incomer and 40 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623. |
| 153 | M&L in replacement MCCB 125 Amps, 16 KA , 4P, complete all as specified & dirceted by Engineer-in-Charge |
| 154 | S&F sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 10 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall with sutable sand and cement, complete. |
| 155 | S&F sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 230 volts, 50 Hz, 10KA breaking capacity complete. |
| 156 | M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts,check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed. |
| 157 | Supply & Fix all accessories of PCB BLDC ceiling fanincluding remoteany type, any make & any capacityincluding taking down carefully ceiling fan & refixing the same as per requirement at site complete all as specified & directed by Engineer-in- Charge. |
| 158 | S & F PVC canopy upper & lower of ceiling fan of any size & make complete with nuts, bolts& washerscomplete all as specified & directed by Engineer-in-Charge. |
| 159 | Taking down old unsvdownrod and S &F 1.5/2 feet long Ceiling fan rod(as per sire requirement) duly made out of mildsteel incl taking down & refixing of existing ceiling fan of any sweep and make & making connection from ceiling rose of PVC connector complete all as specified& directed. |
| 160 | Taking down old unsvdown rod and S &F3 feet long Ceiling fan rod(as per sire requirement) duly made out of mildsteel incl taking down & refixing of existing ceiling fan of any sweep and make & making connection from ceiling rose of PVC connector complete all as specified& directed. |
| 161 | Taking down old unsvceiling fan rotor & S and F new rotor of ceiling fan of any sweep & make & making in good condition complete all as specified& directed. |
| 162 | S & F in replacement onlyof ceiling fan housing body partscomplete all as specified and as directedby Engineer-in-Charge. |
| 163 | S & F in replacement onlyspringof ceiling fan complete all as specified and as directedby Engineer-in-Charge. |
| 164 | S & F in replacement onlymotor screw of ceiling fan complete all as specified and as directedby Engineer-in-Charge |
| 165 | S & F in replacement onlycapacitor clamp of ceiling fan complete all as specified and as directedby Engineer-in-Charge |
| 166 | S & F in replacement onlyblade screw of ceiling fan complete all as specified and as directedby Engineer-in-Charge |
| 167 | S & F in replacement onlyrubber clamp of ceiling fan with nuts, bolts & washers & safety pincomplete all as specified and as directedby Engineer-in-Charge. |
| 168 | S & F in replacement PVC cable copper conductor multistranded flexible wire 23/0.0076 twin core & making connection from ceiling rose to fan complete all as specified and as directedby Engineer-in-Charge. |
| 169 | Taking down old unsvceiling fan starter& S and F new starter of ceiling fan of any sweep & make & making in good condition complete all as specified& directed by Engineer-in-Charge. |
| 170 | S&F against BER exhaust fansAC single phase 230/240 V of size 300 mm sweep,Air flow rate > 900cum/min, Bird screen for protection against birds, double ball bearing, heavy duty, metal body with blade, frame & louvers for fixing of exhaust fan complete. |
| 171 | S&F against BER fresh air fan PVC body air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete all as specified and directed by Engr-in-Charge. |
| 172 | S & F wall fan 400 mm 3 bladein replacement sweep metal typeincluding provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor, length as per requirement at site complete all as specified and directed by Engineer-in-Charge. |
| 173 | Schedule of Credit |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
