Tender For Jackal Enclosure In Arignar Anna Zoological Park, Chengalpattu-Tamil Nadu

Tender For Jackal Enclosure In Arignar Anna Zoological Park; 1 PART - A - NIGHT SHELTER 2 Earth work excavating and depositing on bank with initial lead of 10mt. And initial lift of 2mts in hard stiff clay, stiff block cotton hard red earth and earth mixed with small size boulders and hard gravelly soil SS20B for foundation 3 Supply and filling M-sand in foundation 4 Providing Plain cement concrete 1:4 :8 using 40mm metal jelly for foundation 5 Random Rubble Masonry with cement mortafor 1:5 for foundation and basement 6 Rodent Proof on foundation up to Plinth + Half of the Above RR 7 Supply and erection of steel centering for plane surface of plinth Beams,column,roof beam, slab 8 Supplying, fabricating and placing in position of MS/RTS roads for RCC plinth beam 9 Supplying the MS/RTS roads for Grills 10 Suppling Mild Steel L Angle size50x50x6mm 11 Supplying Mild Steel Flat Bar size 50x6mm 12 Supplying and fixing SS Rods, Frames for Grills 13 labour Charge for Fixing Rods,L angel and Flat bars 14 Supply of Chain Link - 1” x 1” using 10 Gauge Galvanised Iron Wire (of all sizes) 15 Labour Charge for fixing of Chain Link 16 Reinforced cement concrete 1:2:4 using 20mm size hard broken stone excluding cost of reinforcement and centering charges asper standard specification for plinth beam 17 Refilling of Msand 18 Solid block masonry in cement mortar 1:5 using solid concrete block of 40x20x20cm size. (Solid Block 1:3:6), using 6mm granite chips. 19 PlasteringCM 1:512 mmthick for flooring surface 20 Colour washing two coats Shell lime using 21 Finishing the top of roof with on course of machine pressed tiles ( 23 cmx23cmx20mm) in cement mortar1:3 (one cement and three sand)12mm thick with crude oil 10 %by weight of cement used and pointed neatly with the same oiled mortar. 22 Painting two coats with ready mixed paint of approved brand and colour over one primer on new iron work 23 Supply and fixing 60x60x4mm SS Equal Angle 304 24 Supply and fixing 50x50x4mm SS Equal Angle 304 25 Supply and fixing of 20mm dia SS 304 26 Railing wheel 27 SS Shutter guide channel 75x40x4.8 28 Providing and fixing of polyurethane foam for Sloped roof as thermal insulation panels 50mm thickness along with necessary flashings such as L flashing, C flashing etc& accessories such as screws, fastners, sealants etc for fixing the panel etc., complete complying with standard specification. 29 Plain cement concrete 1:2:4 using 20mm size hard broken stone excluding cost of reinforcement and centering charges asper standard specification for Drain 30 Crystal glass LED Tube light fitting 31 PVC Pipe 32 Supplying and fixing in position best quality approved make of Jaquar or equivalent under counter oval type wash hand basin of size 560 x 450mm with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia B class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). 33 Supplying and fixing in position 15mm dia following taps made of Jaquar or equivalent (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)Swan neck tap 34 Angle cock 35 PART - B - MOAT WALL 36 Dismantling PCC in old structure 37 Engaging Mazdoor Category-I class Mazdoor for collection and stacking the random rubble masonry 38 Earth work excavating and depositing on bank with initial lead of 10mt. And initial lift of 2mts in hard stiff clay, stiff block cotton hard red earth and earth mixed with small size boulders and hard gravelly soil SS20B for foundation 39 Supply and filling M-sand in foundation 40 Providing Plain cement concrete 1:4 :8 using 40mm metal jelly for foundation 41 Supply and erection of steel centering for plane surface of plinth Beams 42 supplying, fabricating and placing in position of MS/RTS roads for RCC plinth beam 43 Reinforced cement concrete 1:2:4 using 20mm size hard broken stone excluding cost of reinforcement and centering charges asper standard specification for plinth beam 44 Random Rubble Masonry with cement mortafor 1:5 for foundation and basement 45 Random Rubble Masonry with cement mortafor 1:5 for foundation and basement using 80% of Departmental material 46 RCC 1:2:4 for coping 47 Painting one coat for old iron works 48 12mm Toughened Glazing (saint goblin) Glass size (5mx1.5m)

Refer document

INR 50000.0 /-

INR 49.99 Lakhs /-