|
| 1 | C.I.E.L Diaphragm valve as per specifications at Annexure-I &sketch -III offollowing sizes:- |
| 2 | 25 mm |
| 3 | 32 mm |
| 4 | 40 mm |
| 5 | 50 mm |
| 6 | 65 mm |
| 7 | 100 mm |
| 8 | 125 mm |
| 9 | 150 mm |
| 10 | Nylon impregnated neoprene rubber Diaphragm having hardness 60º ± 5º shore A, for CIEL Diaphragm valve to resist 30% HCL + 47% Caustic lye operating pressure and temp. 100 PSI and 16º-60º as per sketche -I & II of following sizes:- |
| 11 | 40 mm |
| 12 | 125 mm |
| 13 | M.S.Rubber lined pipe with flanges on both ends confirming to IS:1239 & IS:4682as per sketches -IV offollowing dimensions:- |
| 14 | dia 40 mm, length 510mm |
| 15 | dia 40 mm, length 350 mm |
| 16 | dia 50 mm, length 500 mm |
| 17 | dia 50 mm, length 980 mm |
| 18 | dia 65 mm, length 500 mm |
| 19 | dia 65 mm, length 2000 mm |
| 20 | dia 100 mm, length 1000 mm |
| 21 | dia 65 mm, length 1000 mm |
| 22 | MSRL Bend 900 confirming to IS:1239 & IS:4682 as per sketche- V of following dimensions:- |
| 23 | dia 50 mm, length ‘a’ 100 mm, length ‘b’ 100 mm |
| 24 | dia 50 mm, length ‘a’ 120 mm, length ‘b’ 120 mm |
| 25 | dia40 mm, length ‘a’ 120 mm, length ‘b’ 120 mm |
| 26 | dia 80 mm, length ‘a’ 160 mm, length ‘b’ 302 mm |
| 27 | dia80 mm, length ‘a’ 160 mm, length ‘b’ 160 mm |
| 28 | dia 65 mm, length ‘a’ 120 mm, length ‘b’ 120 mm |
| 29 | Dia 100 mm length a 150 mmlength b 1200 mm |
| 30 | Dia 65 mm length a 165 mmlength b 285 mm |
| 31 | dia 50 mm, length ‘a’ 290 mm, length ‘b’ 110 mm |
| 32 | dia 125 mm, length ‘a’ 220 mm, length ‘b’ 220 mm |
| 33 | dia 100 mm, length ‘a’ 160 mm, length ‘b’ 160 mm |
| 34 | M.S.R.L. TEE confirming to IS:1239 & IS:4682 asfollowing assketche-IV of following dimensions:- |
| 35 | Dia50 mm, length ‘L1’ 130 mm, length ‘L2’ 130 mm and length L3 130 mm |
| 36 | Dia40 mm, length ‘L1’ 120 mm, length ‘L2’ 840 mm and length L3 240 mm |
| 37 | Dia50 mm, length ‘L1’ 940 mm, length ‘L2’ 140 mm and length L3 140 mm |
| 38 | Dia50 mm, length ‘L1’ 1440 mm, length ‘L2’ 130 mm and length L3 140 mm |
| 39 | Dia100 mm, length ‘L1’ 500 mm, length ‘L2’ 150 mm and length L3 200 mm |
| 40 | Dia 40 mm, length ‘L1’ 125 mm, length ‘L2’ 125 mm and length L3 130mm |
| 41 | MSRL Tee With Reducer confirming to IS:1239 & IS:4682 as per sketches -V of following dimensions:-: |
| 42 | Dia 50 mm length ‘L1’ 125 mm,Dia 50 mm length ‘L2’ 175 mm,Dia 40 mm length ‘L3’ 240 mm |
| 43 | Dia 50 mm length ‘L1’ 160 mm,Dia 50 mm length ‘L2’ 150 mm,Dia 40 mm length ‘L3’ 240 mm |
| 44 | Dia 50 mm length ‘L1’ 155 mm,Dia 50 mm length ‘L2’ 140 mm,Dia 40 mm length ‘L3’ 240 mm |
| 45 | MSRL Bend with reducer confirming to IS:1239 & IS:4682 as per sketche -IV of following dimensions:-: |
| 46 | 100mm x 80 mm length 500 mm |
| 47 | 100mm x 80 mm length 1300 mm |
| 48 | Rubber suction hose pipe as per sketch-VIIof following specifications &dimensions:-: |
| 49 | Rubber suction hose forunloadingof acid and alkali as per IS 7654-1987 of nominal bore 50 mm & length 5mtr having MS rubber lined flange as per ASA 150 on both sides. |
