Tender For Strengthening Of Perimeter Wall (Bldg. No. 54) Including Allied Works In North And South Side Of Rifle Factory, Ishapore.
Tender Value
28.13 Lakhs
Estimated cost
Bid Submission
10 Jul 2025
0 days left
EMD
56300
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Strengthening Of Perimeter Wall (Bldg. No. 54) Including Allied Works In North And South Side Of Rifle Factory, Ishapore.
BOQ
| Sl. No. | Item Description |
| 1 | Removal of spoil: Labour only for removal of spoil mixed with excavated earth, damaged tarfelt, damaged plaster, broken bricks, concrete rubbish and debris, broken glasses etc. from work site to a distance of 1.50 km. outside the factory. (20% deduction in measurement will be made from the volume of spoil ) all complete |
| 2 | Earth work in excavation :Labour only for earth work in excavation in foundation in foundation trenches, not exceeding 1.5 m wide and not exceeding 1.5 min depth getting out in mud soil all complete |
| 3 | Timbering and Strutting : M & L for Use and waste of timbering as planking and strutting for excavations Exc. 1.5m & N. Exc. 3.00 Mt deep in trenches in soil, including wales, struts, open poling boards, etc. as may be necessary and fixing and removal from trenches all complete |
| 4 | P.C.C. (1:2:4) : M & L for providing plain cement concrete type-B1, 1:2:4 mix (using 12.5 mm graded stone aggregate ) as in sub-base, filling and mass concrete, topping of floor all complete |
| 5 | R.C.C. (1:1.5:3) :M & L for providing reinforced cement concrete type m-20, 1:1.5:3 mix (using 20 mm graded stone aggregate) as in foundation including footings plinth beams bases for column roof slab beam lintelsand excluding use and waste of necessary formwork all complete |
| 6 | Brick work(1:6): M & L for brick work with old size subclass\"b\" bricks, straight or curved on plan exc 6m mean radius with (1: 6) cement morter all complete |
| 7 | Glass Coping: M & L for fixing broken glass coping,in cement morter (1:3) on top of wall surfaces all complete. |
| 8 | Boulder filling: S & F of standard size Boulder filling dry, handpacked tightly, as in wire crate apron bunds, in vertical bunds with sloping face (Wire crate measured separately) all complete. |
| 9 | Form work : Use & waste of wooden form work to sides and soffits of beams, roof slabs, chajjas, columns, pillaretc. and the like, vertical or batter rough finished flat surfaces all complete |
| 10 | Bally piling : S & Ffor providing Bally piles fixed with nail or bolt, Type -3 hardwood, any class, 20 cm mean dia, cut to lengths required (n exc 9m) and planted in position ready for driving all complete. |
| 11 | Heading and Pointing Piles: M & L for heading and pointing Bally piles 20cm mean dia, including fixing only rings and deduct from foregoing items if pile shoes are not provided, cutting of heads after driving and taking off rings, removing cutoff portions to Store all complete. |
| 12 | Driving Bally Piles: M & L for driving Bally piles 20 cm mean dia (portion in ground only to be measured), n exc 6m in depth all complete. |
| 13 | Wooden framed work : S & F wooden framed work with 2nd class hard wood (sal) plain, solid, straight frames, wrough, framed rebated on the solid, rounded orchamfered put together with glue, pinned at joints etc, complete in all respect. |
| 14 | Pannel shutter 35 mm thick : S & F 35 mm thickpanel shutter, with plain, framed, panel shutter with panels of timber flat on both side (feather edged) of second class hard wood (bhola / gamari) & fitted to frames all complete |
| 15 | Butt Hinges :S & F 100 mm long butt hinges medium weight cold rolled mild steel and fixed all complete |
| 16 | Aluminium Tower Bolt 200 mm long :S & F 200 mm long aluminum anodised barrel tower bolts of extruded section and fixed all complete |
| 17 | AluminiumHandle : S & F 125 mm long extruded anodised aluminium handle fabricated typeand fixed all complete |
| 18 | Aluminium sliding door bolts: S & F 250 mm aluminium alloy,anodised,sliding door bolts with hasp,staple (bolt type) and fixing clips of sheet,cast or extruded sections or cast aluminum alloy and fixed,complete in all respect |
| 19 | Hinge Cleat :S & F hinge cleat made of 2nd class hard wood not exc 200 cu. cm. each including supply of 50 mm long butt hinges, medium weight, cold rolled mild steel etc, all complete. |
| 20 | Reinforcement : M & L for providing reinforcementwork with tmtmild steel bars 08 mm and over, cut to length, bent to shape required, including cranking, bending, hooking ends & binding with mild steel wire (annealed) not less than 0.9 mm dia. etc. complete. |
| 21 | M.S. framed work: S & F for framed work of trussed, purlins, joists etc. or others made of mild steel angle, tee etc. of approved sections including cutting, drilling, welding etc. as required complete in all respect. |
| 22 | Steel plates : S & F mild steel plates (plain or chequered) channels, square cut or notched ordinary and counter sunk with riveted, bolted or welded attachment all complete |
| 23 | M.S. Small articles :S & F for providing mild steel straps, clamps, hold fasts etc, as small articles, to be fixed in position as required |
| 24 | Steel window : S& F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all complete |
| 25 | Barbed wire : S & F galvanised 2 strand steel barbed wire, 2.24 mm dia. barbed wire 2mm dia. barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc. all complete |
| 26 | Mild Steel Sheet Covering: S & F for mild steel pain black sheet 1.25 mm thick in hearths covering wooden surfaces cut to size edges beaded if directed holes punched including round headed screws etc. with 40mm lap joints or welded etc.as required complete in all respect. |
| 27 | Supply only chain link fencing : Supply only chain link fencing 4.0 mm dia. of mesh 100mm x 100mm galvanised iron wire mesh all complete. |
| 28 | Fixing of chain link fencing : Fixing only chain link fencing including line wires any mash, size and type to any type of standards , rails, straining bolts etc. including provision of binding wires and fixing to fencing post all complete. |
| 29 | Non-skid flooring : S & F for providing non skid joint free ceramicfloor tiles of size of each tiles not exc 0.18 sqm, 8mm thickness, approved colour ofKajaria , Jhonson, Orient or substantially equivalent make to be set and jointed in neat cement slurry and pointed in colour cement to match complete in all respect. |
| 30 | Cement plaster(1:4): M & L for providing 12 mm thick cement plaster 1:4 mix on fair faces of brick work or concrete surfaces at any height all complete. |
| 31 | Ceiling plastering (1:4) : M & L for rendering 10 mm thick cement plaster 1:4 mix in ceiling or concrete surfaces of any description all complete. |
| 32 | Bedding layer (1:4) :M & L for rendering average 20 mm thick cement plaster 1:4in screed bed over existing concrete surface, brick wall etc. of any description. |
| 33 | Exterior surface painting : M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having with [make: of 1st quality of Asian/Berger/ICI or substantially equivalent] VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm after necessary preparation of new surfaceall complete. |
| 34 | Washable distempering on wall :M & L for applying two coats of washable distemper of 1st quality make- Asian / Berger / ICIor substantially equivalent make after necessary preparatory workwithprimer to distempering of wall all complete |
| 35 | Sheet glass : M & L for providing 3 mm thick sheet glass, ordinary quality tinted or plane as required and glazing with oil putty in squares not exc. 0.5 sqm. in each panel all complete |
| 36 | Steel painting two coat: M & L for applying two coats of synthetic enamel paint finished glossy of 1st quality; Make: Asian / Berger / ICI or substantially equivalent make,over a coat of priming with red lead primerafter necessary preparation of new decorated steel surfaces of any description over 10 cm width or girth all complete |
| 37 | Wood painting two coat : M & L for applying two coats of synthetic enamel paint finished glossy of 1st quality; Make: Asian / Berger / ICI or substantially equivalent make, over a coat of primer after necessary preparation of new wood surfaces of any description over 10 cm width or girth all complete. |
| 38 | Coal Tar Paint : M & L for applying one coat of coal tar black paint of wooden scantlings of wooden framed work of any girth any description and any height all complete |
| 39 | R.C.C. Pipe :- M& L for providing reinforced concrete pipes, 750 mm dia class NP 3 with one collar per length of pipe all complete |
| 40 | Single brick flat soling : M & L for providing single brick flat soling with well burnt soling brick including filling of interstices with white sand all complete. |
| 41 | Demolition of brick work: Demolition of brick work or stone/boulder masonry of any typebuilt in cement morter including all quoins, arches, pillars etc all complete |
| 42 | Demolition of PCC: Labour only for demolition of cement concrete of any description and in any position and removing the same out off the work site all complete |
| 43 | Concertina Fencing: S & F concertina coil fencing with punched tape concertina coil 600 mm dia, having 50 nos rounds per 6 metre length,with existing angle iron ‘y’ shapedand with 9 horizontal R.B.T. reinforced barbed wire, stud tied with GI staples and GI clips to retain horizontal, including necessary bolts or GI barbed wire tied to angle iron, with reinforced barbed tape(R.B.T) / spring core (2.5mm thick) wire of high tensile strength of 165 kg/sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre all complete |
| 44 | Removal of old wiring: Taking down carefully by unscrewing from boards / outlets boxes, fittings and fixtures such as switch socket,ceilling roses, lamp holders, brackets,ceilling fittings,regulators, related wiring,etc. and carrying to scrap area. |
| 45 | MCB enclosure: Supply and fixingof Siemens / Legrand /Havells / Indo Asian or substantially equivalent makesheet metal enclosure suitable for fixing of DP/TP/TPN MCB along with earth connection point. |
| 46 | 40A TPN MCB: Supply and fixing and connecting completed ofSiemens / Legrand /Havells / Indo Asian or substantially equivalent makeTPN MCB/Isolator, upto 40A,415V. |
| 47 | 40A DP MCB:Supply and fixing and connecting completed ofSiemens / Legrand /Havells / Indo Asian or substantially equivalent makeDP MCB/Isolator, upto 40A,240V. |
| 48 | Calling Bell: Supply & fixing and connecting completedCalling Bell Ding Dong, 230VAC. |
| 49 | Bell Push: Supply and fixing & connecting complete one bell push of 5A rating. |
| 50 | Lamp holder: Supply & fixing of PVC/Polycarbonate type lamp holder with back plate suitable for batten fittings. |
| 51 | Ceilling rose: Supply, fixing and connecting completedAnchor / Rider / Havells / V-Guard or substantially equivalent make celling rose of pvc/polycarbonate isolated body suitable for 230VAC supply. |
| 52 | 2.5 sqmm Cu sub main: Supply and fixing of FRtype Finolex / Havells / Polycap or substantially equivalent make2 x (2.5 sq mm single core multistrand PVCinsulated copper wire) along with same make 1 x (2.5 sq mm single core multistrandcopper earth wire) along with pvc conduite or casing capingfor sub main. |
| 53 | 6A piano switch: Supply and fixing and connecting completed of Anchor / SSK / Standard / Havells / Pritam or substantially equivalent make 6 Amps piano switchflush type, single pole one way. |
| 54 | 6A socket outlet: Supply and fixing and connecting completed of Anchor / SSK / Standard / Havells / Pritam or substantially equivalent make 6 Amps socket outlet 3/5 pin flush type, single phase. |
| 55 | Ceilling fan regulator: Supply and fixing and connecting completed of Anchor / Rider /Havells/V-Guard or substantially equivalent make stepped electronic fan regulator flush type on existing laminated sheet of250VAC, single way. |
| 56 | Point wiring: M & L for point wiring of one light point or one plug point or one fan point controlled by one switch withFinolex / Havells / HPL / Polycab or substantially equivalent make pvc insulatedmultistrand copper conductor of 1.5 sqmm in pvc casing caping with same makeinsulated 1 sq mm copper earth wire. |
| 57 | Same board point wiring: M & L for point wiring of one 3 pin plug point 5 amps on the same board with other switcheswith 1.5 sqmm FR typeFinolex / Havells / Polycap makePVC insulated multistrand copper wire along with same make1 sq mmcopper earth wire. |
| 58 | Removal of cable,etc.: Labour only for dismantling and removal of existing embedded cables, pipes,tubes,etc. upto 20mm diaincluding taking out from site. |
| 59 | 150X100X60mmGI switch board: Supply and fixing & connecting complete GIsheet metal box of suitable thickness and size 150X75X60 mm withbakelite top cover. |
| 60 | 200x150x60mm GI switch board: Supply, fixing & connecting complete GIsheet metal box of suitable thickness and size 200X150X60 mm with bakelite top cover. |
| 61 | Kit kat fuse: Supply,fixing and connecting complete of one 15A kit kat fuse to be fixed oncover plate with other switches and socket. |
| 62 | Cable termination: M / Labourfor cable end terminal joints any type complete suitable forpvcinsulated4 core armoured aluminium conductor cable upto 25 sq. mm size. |
| 63 | Water tight JB: Supply & fixing on pole of water tight pvc junction box on wall/pole with the help of MS clampsbox size 350mm X 250mm X 100mm(approx) totally enclosed with hinged door with metric knock out at the bottom comprising of 4 terminal porcelain insulator block along with stud bolts & nuts, 1 no. kitkat fuse, including internal wiring with copper wires. |
| 64 | Supply and fixing of ceilling fan sweepsize: 1400mm, capacitor type, 230V, 50HZ of Bajaj / Havells / Crompton/ Ushaor substantially equivalent make BEE 5Star rated,IS-374. |
| 65 | Tube light with fitting: Supply and fixing ofPhilips / Bajaj / Havells / Crompton or substantially equivalent make single LED compact batten CRCA sheet steel powder coated, pre-wired rotor type lamp holder for G13 socket, with double LED T/L,colour temp. 6000K, 2x18W LED inbuilt electronic driver, including all fixing accessories. |
| 66 | 45W bracket fittings: Supply & fixingof Philips / Bajaj / Havells / Suryaor substantially equivalent make LED light fittings system wattage 45W-48W, die- cast Al. housing with power coated, IP65 LED, module LED chip lens, colour temp. 6000K(+/-10%), system efficacy>/=80 LM/W, in-built electronic driver, PF>/=0.9, THD |
AI Tender Summary
Tender Timeline
Jun 17, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJul 10, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 15, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender