Tender For Miscellaneous Civil Works At Bcpl Plant; 1 Short Text : Hydraulic Excavator Long Text : Hire charges for Hydraulic Excavator of 1 cum bucket (Not to be quoted by the Bidder) 2 Short Text : Motor Grader 3.35 me Long Text : Hire charges for Motor Grader 3.35 metre blade (Not to be quoted by the Bidder) 3 Short Text : Vibratory roller 8 t Long Text : Hire charges for Vibratory roller 8 to 10 tonne (Not to be quoted by the Bidder) 4 Short Text : Tandem Road Roller Long Text : Hire charges for Tandem Road Roller (Not to be quoted by the Bidder) 5 Short Text : Air compressor 250 cfm Long Text : Hire charges for Air compressor 250 cfm with two leads for pneumatic cutters /hammers (Not to be quoted by the Bidder) 6 Short Text : Hydraulic Excavator (3D Long Text : Hire charges for Hydraulic Excavator (3D) with driver and fuel (Not to be quoted by the Bidder) 7 Short Text : Tractor with trolley /ripper Long Text : Hire charges for Tractor with trolley /ripper attachment (Not to be quoted by the Bidder) 8 Short Text : Tipper Long Text : Hire charges for Tipper (Not to be quoted by the Bidder) 9 Facility management charges on equipment hiring items (Item No: 1 to item No 8) 10 Short Text : GSB Long Text : Construction of granular sub-base by providing close-graded material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed materials by tippers to work site, for all leads and lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-charge: with materials conforming to Grade-I ( size range 75mm to 0.075mm) having CBR value-30 (Not to be quoted by the Bidder) 11 Short Text : Scarifying WBM Long Text : Scarifying metalled (water-bound) road surface including disposal of rubbish, lead upto 50 m and consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity. (Not to be quoted by the Bidder) 12 Short Text : WBM Long Text : Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . (Not to be quoted by the Bidder) 13 Short Text : Surface dressing with bitumen emulsion Long Text : Surface dressing one coat on old surface with bitumen of specified grade at the rate of 1.22 kg/ sqm of surface area with 1.10 cum of stone chippings 11.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 tonne capacity etc.complete :Using bitumen emulsion (minimum 50% bitumen content-RS grade conforming to IS : 8887) (Not to be quoted by the Bidder) 14 Short Text : DBM Long Text : Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge: 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. (Not to be quoted by the Bidder) 15 Short Text : SDBC Long Text : Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge: 25mm compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. (Not to be quoted by the Bidder) 16 Short Text : Surface excavation Long Text : Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil (Not to be quoted by the Bidder) 17 Short Text : Excavation by mechanical means Long Text : Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge:All kinds of soil (Not to be quoted by the Bidder) 18 Short Text : Filling available earth Long Text : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (Not to be quoted by the Bidder) 19 Short Text : Excavating & Filling local earth Long Text : Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. (Not to be quoted by the Bidder) 20 Short Text : Sand filling Long Text : Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. (Not to be quoted by the Bidder) 21 Short Text : Surface dressing of ground Long Text : Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m: All kinds of soil (Not to be quoted by the Bidder) 22 Short Text : Ploughing Long Text : Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same: All kinds of soil (Not to be quoted by the Bidder) 23 Short Text : Clearing jungle Long Text : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared (Not to be quoted by the Bidder) 24 Short Text : Clearing grass Long Text : Clearing grass and removal of the rubbish up to a distance of 50m outside the periphery of the area cleared. (Not to be quoted by the Bidder) 25 Facility management charges on road repair and related works (Item No: 10 to item No 24) 26 Short Text : Steel reinforcement Fe500 or more Long Text : Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level:Thermo-Mechanically Treated bars of grade Fe-500D or more. (Not to be quoted by the Bidder) 27 Short Text : Structural steel work - single section Long Text : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete (Not to be quoted by the Bidder) 28 Short Text : Structural steel work - builtup section Long Text : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (Not to be quoted by the Bidder) 29 Short Text : Structural steel work - tubular section Long Text : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete:Hot finished seamless type tubes (Not to be quoted by the Bidder) 30 Short Text : Concertina coil fencing Long Text : Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) (Not to be quoted by the Bidder) 31 Short Text : Precoated GI profile sheets Long Text : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Not to be quoted by the Bidder) 32 Short Text : Precoated galvanised steel sheet ridges Long Text : Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm) (Not to be quoted by the Bidder) 33 Short Text : PCC upto plinth-1:1.5:3 Long Text : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (Not to be quoted by the Bidder) 34 Facility management charges on items involving Iron & Steel (Item No: 26 to item No 33) 35 Short Text : PCC upto plinth-1:2:4 Long Text : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (Not to be quoted by the Bidder) 36 Short Text : PCC above plinth-1:1.5:3 Long Text : Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (Not to be quoted by the Bidder) 37 Short Text : Shuttering - foundation, bases Long Text : Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns (Not to be quoted by the Bidder) 38 Short Text : Shuttering - walls, steps Long Text : Centering and shuttering including strutting, propping etc. and removal of form work for :Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. (Not to be quoted by the Bidder) 39 Short Text : Shuttering - columns, abutments Long Text : Centering and shuttering including strutting, propping etc. and removal of form work for :Columns, piers, abutments, pillars, posts and struts (Not to be quoted by the Bidder) 40 Short Text : RCC upto plinth-1:1.5:3 Long Text : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) (Not to be quoted by the Bidder) 41 Short Text : RCC above plinth-1:1.5:3 Long Text : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (Not to be quoted by the Bidder) 42 Short Text : Shuttering - suspended floors Long Text : Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform (Not to be quoted by the Bidder) 43 Short Text : RMC upto plinth M25 Long Text : Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.All works upto plinth level:Concrete of M25 grade with minimum cement content of 330 kg /cum (Not to be quoted by the Bidder) 44 Short Text : RMC above plinth M25 Long Text : Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.All works above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum (Not to be quoted by the Bidder) 45 Short Text : Full brickwork upto plinth (1:4) Long Text : Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) (Not to be quoted by the Bidder) 46 Short Text : Full brickwork above plinth (1:4) Long Text : Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) (Not to be quoted by the Bidder) 47 Short Text : Half brickwork upto plinth (1:4) Long Text : Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :Cement mortar 1:3 (1 cement : 3 coarse sand) (Not to be quoted by the Bidder) 48 Short Text : Half brickwork above plinth (1:4) Long Text : Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) (Not to be quoted by the Bidder) 49 Short Text : Anodised aluminium grill Long Text : Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). (Not to be quoted by the Bidder) 50 Short Text : Anodised aluminium sub-frame Long Text : Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). (Not to be quoted by the Bidder) 51 Short Text : Synthetic enamel paint Long Text : Painting with synthetic enamel paint of approved paint and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (Not to be quoted by the Bidder) 52 Short Text : Paver Blocks 60mm thick Long Text : Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. (Not to be quoted by the Bidder) 53 Short Text : Road marking Long Text : Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T<(>&<)>P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. (Not to be quoted by the Bidder) 54 Short Text : GI metal false ceiling Long Text : Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. (Not to be quoted by the Bidder) 55 Short Text : Polycarbonate roofing sheet Long Text : Providing & fixing 2mm thick polycarbonate sheet roofing up to any pitch, including fixing with polymer coated J or L hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins,rafters, trusses etc. The sheets shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. (Not to be quoted by the Bidder) 56 Short Text : Scaffolding Long Text : Supply, Erection & Removal of scaffold: Supply, erection & removal of well secured steel scaffolding material at BCPL plant, as and when required to construct platform at any position as per requirement of Eingineer-in-charge (scope of supply of complete scaffolding materials are under contractors scope of work) Note: This item shall be operational for critical scaffolding requirements above 8m height (Not to be quoted by the Bidder) 57 Short Text : Maintenance of roofing sheets Long Text : Repair maintenance of roofing sheets: Repair of roofing sheets installed in existing building by engaging skilled manpower on call basis (Not to be quoted by the Bidder) 58 Short Text : Maintenance of false ceiling Long Text : Repair maintenance of false ceiling, doors and false flooring installed in existing infrastructure by engaging skilled manpower (Not to be quoted by the Bidder) 59 Short Text : Civil works of CPWD DSR 2023 Long Text : Works corresponding to items of CPWD DSR 2023 schedule of rates Vol-I & II (other than the line items mentioned in this SOR) having estimated cost of INR 23,00,000.00 after applying correction factor 0.973 as per CPWD Office memorandum and deducting GST @18%. GST as quoted by the bidder shall be paid on the overall bill value. [For instance , if the item rate of DSR 2023 is Rs. 100, rates payable to the contractor against the item (excluding GST) shall be= [ Rs (100 x 0.973)/1.18= Rs. 82.46] (Not to be quoted by the Bidder) 60 Facility management charges on items general Civil works (Item No: 35 to item No 59) 61 Short Text : Epoxy flooring Long Text : Providing and Applying Pigmented (approved shade) chemical and Abrasion resistant ,solvent based self levelling floor coating based on epoxy resin with amine curing agent ,in 2 coats @ 125 gms/sqm (min) per coat by brush or spraying over a levelling screed (min. 3 mm thick) of a 3 part solvent free combination of epoxy resin ,amine hardeners and graded chemically inert aggregate filler ,laid over a coat of 2 part epoxy resin primer applied over existing flooring etc.all as per manufacturers specification . (Not to be quoted by the Bidder) 62 Short Text : Fire proofing- equipments/skirts Long Text : Fire Proofing Works:Supply and laying of vermiculite cementitious concrete coating as fire material on all equipment / vessel skirts ,saddles and supports,supplying ,placing and fixing in position welded wire fabric reinforcement of 3mm dia 50X50 mesh conforming to IS:1566 and the reinforcement with the are welded nuts by 16 SWG tying wire ,including straightening ,cutting ,bending of the reinforcement ,cleaning the steel surfaces ,vibrating tamping curing or providing a layer of approved membrane of curing compound ,rendering to achieve a smooth and even surface ,supplying and laying of 10mm thick bituminous mastic flashing conforming to IS:3037 for protection of top edges ,painting the surface with the coat of microporous exterior top coat ,including the cost of all labour, materials, shuttering ,staging ,scaffolding for all shapes and positions etc.All complete as per specifications and directions of engineer-in-charge .(ALL MATERIALS SHALL BE SUPPLIED BY THE CONTRACTOR) (Not to be quoted by the Bidder) 63 Short Text : Fire proofing- structural column/ beams Long Text : Supply and laying of vermiculite cementitious concrete coating as per proofing material around structural steel members (viz beams, columns…) including carrying out the design for the coating thickness and getting the same reviewed by the owner. Complete with supply and welding of MS nuts clearing the steel surfaces, applying primer paint compatible with the already applied paint to the nuts and effected surfaces of the members die to welding, supplying, placing and fixing in position welded wire fabric reinforcement 3 mm dia 50X50 mesh conforming to IS : 1566 and tying the reinforcement to the nuts with 16SWG tying wire, including straightening, cleaning, curing, bending, applying the self primer paint after cleaning of steel members, vibrating, tamping, curing or providing a layer of approved membrane of curing compound, rendering wherever required to achieve a smooth and even surface, providing chamfering at corners, supplying and laying of 10mm thick bituminous mastic flashing conforming to IS : 3037 for protection of top edges; painting the surfaces with 2 coats of micro porous exterior top coat including the cost of all labour, materials, shuttering, staging, scaffolding for all shapes and positions at all heights above pavment etc,all complete as per specifications and directions of Engineer-in-Charge. (ALL MATERIALS SHALL BE SUPPLIED BY THE CONTRACTOR) (Not to be quoted by the Bidder) 64 Short Text : Injection grout- cementitous Long Text : Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. Stirrer mixed SBR Polymer (of approved make) modified cement slurry made with shrinkage Compensating Cement in concrete/RCC work (Not to be quoted by the Bidder) 65 Short Text : Injection grout- epoxy Long Text : Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made based on actual weight of approved grout injected.) Epoxy injection grout in concrete/RCC work of approved make# (Not to be quoted by the Bidder) 66 Short Text : Flowable repair mortar Long Text : Providing and Applying flowable repair mortar for horizontal surface like Floarm Soloplan CMS or equivalent at an average thickness of 10mm which is based on carefully blended cement ,graded fillers and chemical additives and is polymer modified to provide a mortar with good handling characteristics,while minimizing water demand.The hardened product exhibits excellent thermal compatibility with concrete and outstanding water requirement ensures fast strength gain and long term durability .The flowable mortar should have a minimum compressive strength of 60MPA,Flexture strength 8 MPA (Not to be quoted by the Bidder) 67 Short Text : Bonding coat of repair mortar Long Text : Providing and Applying bonding coat before applying flowable repair mortar using Aquarm SBR 45/SBR Latex or equivalent primer as recommended by manufactures (Not to be quoted by the Bidder) 68 Short Text : Joint treatment Long Text : Construction Joint Treatment:-Providing and filling the Contraction joint of size 10mm X 10mm with Poly urethane sealant of approve manufacturers like Fosroc/Myk/STP etc as directed by Engineer in charge. (Not to be quoted by the Bidder) 69 Facility management charges on items involving construction chemicals (Item No: 61 to item No 68) 70 Short Text : Unforeseen supply items Long Text : Provision of unforeseen and non-schedule supply items: Items purchased through vouchers added by 10% on account of contractors profit & overhead for the items other than the tender items required under this contract. (Not to be quoted by the Bidder)
