Tender For Comprehensive Repair And Rewiring Of Md Accn And Misc Works At Bakloh Cantt Under Age (I) Dalhousie
Tender Value
25 Lakhs
Estimated cost
Bid Submission
08 Jul 2025
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dalhousie → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Comprehensive Repair And Rewiring Of Md Accn And Misc Works At Bakloh Cantt Under Age (I) Dalhousie
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully copper / aluminium point wiring (light, fan, socket or power)complete, includingfixture andfittings such asswitches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all asspecified and directed. |
| 2 | Point wiring for one light/fan/call bell point controlled by one 5/6 Amp switch with 1.5 Sqmm two single core multistranded copper conductor FRLSH, PVC insulated (unsheathed) heavy duty cable 1100 volts including continuous earth wire of size 1.5 Sqmm copper conductor multistrand FRLSH, PVC insulated (unsheathed) drawn into concealed rigid non-metallic PVC conduit Med Grade ISI marked not less than 20mm wide of 1.8mm wall thickness ISI marked including modular GI sunken flush box (Modular GI sunken flush boxese of any way i.e. 1 to 8 way as per site requirement) for mounting switches, sockets, fan regulators etc & making good to disturbed surfaces as well as matching with existing whitewash colour/surface complete all as specified and as directed for the following:- (a)Wiring shall be done by using proper colour coding(b)Earth wire shall be of green colour(c)On RCC roof/ceiling PVC conduit shall be provided on surface with proper fixing clamps all as directed. |
| 3 | All as per the description of serial item No 2 here-in-before but one 5 pin socket outlet, 5 amps on the same board complete all as specified and directed. |
| 4 | All as per the description of Serial itemNo. 2 above but one 5 pin socket outlet, 5/6 Amp on independent board complete all as specified and directed. |
| 5 | All as per the description of Serial itemNo. 2 above but for one light point controlled by two two wat switches complete all as specified and directed. |
| 6 | All as per the description of Serial Item No. 2 above but for 16 Amps socket point on independent board with 2.5 Sqmm PVC insulated FRLS-H multi-stranded copper conductor with 2.5 Sqmm PVC insulated FRLS-H multi-stranded copper conductor as earth wire,complete all asspecified and directed. |
| 7 | Modular switch 1 way 6A, 1 module complete all as specified and directed. |
| 8 | Modular switch 2 way 6A, 1 module complete all as specified and directed. |
| 9 | Modular switch 1 way 16A, 1 module complete all as specified and directed. |
| 10 | Modular socket, 6A-2/3 pin combined 2 module complete all as specified and directed. |
| 11 | Modular socket, 6A and 16A, 2/3 pin combined 2 module complete all as specified and directed. |
| 12 | Ding dong bell musical type AC 230 volt single pole complete all as specified and directed. |
| 13 | Modular bell push 5/6A switch, complete all as specified and directed. |
| 14 | Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area , two single core, PVC insulated and unsheathed FRLS-H cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including medium grade, PVC casing caping and accessories on wall/roof/floor etc, ISI marked with mild steel/pressed steel sunken box duly painted with two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally,covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, including PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS-H cable as earth continuity conductor for one light/ fan/bell point controlled by one switch & making good to distubed surfaces as well as matching with existing whitewash colour/surface complete all as specified and directed. |
| 15 | All as per the description of serial itemNo. 14 above but one 5 pin socket outlet, 5/6 Amp on the same board complete all as specified and directed. |
| 16 | All as per the description of serial itemNo. 14 above but one 5 pin socket outlet, 5/6 Amp on independent board complete all as specified and directed. |
| 17 | All as per the description of serial item No. 14 above but for 16 Amps socket point on independent board with 2.5 Sqmm PVC insulated FRLS-H multi-stranded copper conductor with 2.5 Sqmm PVC insulated FRLS-H multi-stranded copper conductor as earth wire & making good to disturbed surfaces as well as matching with existing whitewash colour/surface complete all asspecified and directed. |
| 18 | Switch piano 6 Amp flush type single pole one way with ISI marked,complete all as specified and directed. |
| 19 | Bell push , flush type, 5 Amp, complete all as specified and directed. |
| 20 | Socket outlets 2-in-1, 3 pin 6 Ampflush type, complete all as specified and directed. |
| 21 | Socket outlet 16 Amps, 3 pinflush type, complete all as specified and directed. |
| 22 | Switch piano 16 Amp flush type single pole one way with ISI marked,complete all as specified and directed. |
| 23 | Ceiling rose, 3 phase / PVC / Polycarbonate, isolated body complete all as specified anddirected. |
| 24 | Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver., 10 watt LED,6500k, two feet long, with all acessoreis internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable sizeincluding dismantling of unserviceable tube light all as specified and directed.Make: Havell\"s Cat Part No. LUMILINEBS10WLED865SPCWH of\"Havells\" or equivalent in makes mentioned in Appendix |
| 25 | Decorative ultra slim square profile LED lighting fixture , 20 Watt, 6500K,with extruded polycarbonate, environmental friendly, energy efficient ready to use pack, including connecting up with twin core twisted flexible copper conductor cable with suitable sizeincluding dismantling of unserviceable tube light all as specified and directed.Make: Havell\"s Cat Part No. LHEXAWP7IN1W020 of\"Havells\" or equivalent in makes mentioned in Appendix |
| 26 | Decorative, wall mounting fixture, in durable plastic body & designer mesh in gold finish including 9 Watt LED lamp including connecting up with threecore twisted flexible copper conductor cable with suitable sizeincluding dismantling of unserviceablelight all as specified and directed.Make: Havells cat part No. LHFOECE1TZ1B014 or equivalent in Appx |
| 27 | Replacement of 35Watt New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08. connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting including bracketmade up of 32mm dia GI pipe light grade 1.5 metre long and bent to shape required, complete all as specifiedMake: Havells cat part No. ENDURASUNDOWNSL35WLED765PASYBOPC or equivalent in Appx |
| 28 | LED Luminaire 600mmx600mm, 36 watt, 6500K, Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting withArmstrong/Grid ceiling, complete all as specifiedMake: Havells cat part No. LHEBAEP7IW1W036 or equivalent in Appx |
| 29 | Meter box consisting space to fix MCCB as incomer and 04 Nos meter and providing 05 Nos MCB SPN 40 Amps 100mA, METER box double door fixed type wall mounted CRCA approved FACTORY MADE, 2 mm thick sheet enclosure outdoor type. The rates including taking down old DB and connecting in new panel with required wires with out any extra cost complete all as specified and directed. The panel should consists of the following :-INCOMING :-(1) MCCB 63 AMP 4 P 16 kA thermal magnetic based with o/c, s/c protection & ROH-01 No (2) Indicatinglamps RYB -03 NosOUTGOING :-(1) 40 Amp MCB SPN 100mA with enclosure -04 Nos (2) Space for refixing existing electrical meter -04 Nos. The internal wiring of panel should be of 6 sqmm from busbar to electric meter and electric meter to RCBO including a suitable size of thimbles NOTE:- (i) Contractor should visit the site and to prepare panel as per size required to fit below staircase of the bldg complete all as specified and directed by Engr-in-Charge.(ii) The rate also includes for taking down existing meter and refixing the same in Meter Panel |
| 30 | LED 12 W , rechargeableINVERTER BULB, B22 V2 , white,Lumen Output (1200lm), Color (6500K), upto 4 hours backup and auto cutoff after full charge , complete. all as specified and directed.Make: HavellsCat Part No. LHLDDDEAIB5R012 or its equivalent make in Appendix |
| 31 | Factory made DB TPN 4 way double door with suitable size of copper bus bar concealed in wall IP 43 protection,415 V,3 phase 50 Hz for fixing MCB & making good to disturbed surfaces as well as matching with existing whitewash colour/surface complete all as specified and directed.Note:- Distribution board and MCB\"s should be same make. |
| 32 | Factory made VTPN 4 way double door with suitable size of copper bus bar concealed in wall IP 43 protection,415 V,3 phase 50 Hz for fixing MCCB & making good to disturbed surfaces as well as matching with existing whitewash colour/surface complete all as specified and directed.Note:- Distribution board and MCB\"s should be same make. |
| 33 | S&F factory made DB SPN8 way double door with 200 Amps rated bus bar concealed in wall IP 42/43 protection,240V for fixing MCB & making good to disturbed surfaces as well as matching with existing whitewash colour/surface complete all as specified and directed.Note:- Distribution board and MCB\"s should be same make. |
| 34 | Single pole and neutral enclosure witha two pin and earth plug and socket complete with one single pole MCB, 20 Amp & making good to disturbed surfaces as well as matching with existing whitewash colour/surface complete all as specified and directed. |
| 35 | MCCB 4 pole with Adjustable Thermal & Fixed Magnetic ,160 Amps , 50 Hz 415 Volts, having rupturing capacity 36 KA, including taking down old MCCB all as specified and directed. |
| 36 | MCB SP ‘B’ curve, 10KA, 240V,6 to 32 amps, in the MCB DB including necessary connectioncomplete all as specified and directed. |
| 37 | MCB SPN ‘B’ curve, 10KA, 240V,6 to 32 amps, in the MCB DB including necessary connectioncomplete all as specified and directed. |
| 38 | MCB SPN ‘B’ curve, 10KA, 240V,40 to 63 amps in the MCB DBincluding necessary connection complete all as specified and directed. |
| 39 | MCB TPN ‘B’ curve, 10KA, 415V,63 ampsin the MCB DB including necessary connectioncomplete all as specified and directed. |
| 40 | M&Lsub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS-H, cable of 2 run 6 Sq mm for phase and neutral and one run of 6 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS-H, cable drawn through non metallic rigid PVC conduit not less than 20mmdia ISI marked including all conduit and fixing accessories complete. Two runs of cable for phase/neutral, one run of cable for earth and one run PVC conduit will be measured and paid as one unit length complete all as specified and directed.Note:- Wiring shall be done in proper colour coding. |
| 41 | Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate not less than 1.5 metre below ground level, connecting to galvanised iron strip 25x 4mm dia (as earth lead), by means of bolt, nuts, check nuts and washer of galvanised and earth wire protected by provision of galvanised iron pipe light grade, 15mm bore including provn of concrete pit in PCC M-15, type B-I using 20mm graded crushed stone aggregates with 40mm thick precast cover of size 550 mm X 550 mm X 75 mm of RCC M-15, type B-I, reinforced with XPM (weight not less than 4 kg/ Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia mild steel bar handle made to shape, galvanised iron medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixingarrangement, funnel, wire mesh and including earth work in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metre, all as per electricalplate No. 3 of SSR 2009 Part-I and connection to earth test point all as specified and testing on completion. |
| 42 | Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 22 of tender doucments. |
AI Tender Summary
Tender Timeline
Jun 17, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJul 08, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 15, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender