Drinking Water Supply and Sanitation Government Departments Closing in 0 days TDR #49707928

Tender For Special Repair And Maintenance Of Service Gate, Emergency Gate And Painting Of Lower Rajghat Canal (Lrc) At Rajghat Dam

Issued by Government Departments · rajghat, Uttar Pradesh
Tender Value
16.87 Lakhs
Estimated cost
Bid Submission
24 Jun 2025
0 days left
EMD
33750
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
rajghat → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Special Repair And Maintenance Of Service Gate, Emergency Gate And Painting Of Lower Rajghat Canal (Lrc) At Rajghat Dam

BOQ

Name of Work: Special Repair and Maintenance of service gate, Emergency gate and painting of Lower Rajghat Canal (LRC) at Rajghat Dam.
Sl. No. Item Description
1Part A
2Opening & fitting of 2 nos service gate, all damaged part, bolt nut, old rubber seal, cutting by gas cutter, lifting of gate on crust including cost of trained mechanical person and helper as required T&P with cost of oxygen and DA gas cylinder ,diesel gen. set and transportation charges and halting at site etc. complete (As per market rate) excluding of GST
3Providing and making casting C.I. roller including cost of casting, turning, boring and collar making as required. (220x220x25)/4000000/115=34.78x6 no. (As per sanction rate of SE, IV Circle, Jhansi vide letter no.-1014. Dt. 13.02.2019) excluding of GST
4Providing, casting and making G.M. bush for roller including cost of casting, turning, bearing and collar making as required. (Dia 60x60x25)/4000000x120=2.70x6 no.(As per sanction rate of SE, IV Circle, Jhansi vide letter no.-1014. Dt. 13.02.2019) excluding of GST
5Providing and making S.S. pin for roller including cost of turning, and collar making as required.Dia 70x240x29.20kg./Mtr.=7.008x6no.+10%cutting/wastage(Dia 60x60x25)/4000000x120=2.70x6 no. (As per sanction rate of SE, IV Circle, Jhansi vide letter no.-1014. Dt. 13.02.2019) excluding of GST
6Providing,casting and making guide shoe including, turning, boaring sharpening, drilling as required. 1 no. 20.00 kg.x4 no.=80.00 kgs.(Dia 60x60x25)/4000000x120=2.70x6 no. (As per sanction rate of SE, IV Circle, Jhansi vide letter no.-1014. Dt. 13.02.2019) excluding of GST
7Providing of rubber seal including cost of seal flate and countre sunk screw as required. (1500x2=3.00)+(1500x2=3.0)= 6.0 mtr.(Dia 60x60x25)/4000000x120=2.70x6 no. (As per sanction rate of SE, IV Circle, Jhansi vide letter no.-1014. Dt. 13.02.2019) excluding of GST
8Providing of bolt nut and washer off size. (Dia 60x60x25)/4000000x120=2.70x6 no. (As per sanction rate of SE, IV Circle, Jhansi vide letter no.-1014. Dt. 13.02.2019) excluding of GST
9Providing, casting and making C.I. wire rope pulley including cost of casting, boring, groove cutting as required.275x275x25)/4000000x100=47.26x4 no.(Dia 60x60x25)/4000000x120=2.70x6 no. (As per sanction rate of SE, IV Circle, Jhansi vide letter no.-1014. Dt. 13.02.2019) excluding of GST
10ADD GST 18% PART A
11Part-B-Repair & mantenance of Emergency gate of URC 1 nos gate size (1500x1500) mm
12Opening & fitting of 2 nos emgergency gate, all damaged part, bolt nut, old rubber seal, cutting by gas cutter, lifting of gate on crust including cost of trained mechanical person and helper as required T&P with cost of oxygen and DA gas cylinder ,diesel gen. set and transportation charges and halting at site etc. complete (As per market rate)
13Providing and making casting C.I. roller including cost of casting, turning, boring and collar making as required.(220x220x25)/4000000/115=34.78x6 no.
14Providing, casting and making G.M. bush for roller including cost of casting, turning, bearing and collar making as required.2.50x6 no.
15Providing and making S.S. pin for roller including cost of turning, and collar making as required. Dia 70x240x29.20kg./Mtr.=7.00x6no.
16Providing,casting and making guide shoe including, turning, boaring sharpening, drilling as required.1 no. 20.00 kg.x4 no.=80.00 kgs.
17Providing of rubber seal including cost of seal flate and countre sunk screw as required. (1500x2=3.60)+(2100x2=4.2)= 7.80 mtr.
18Head stock worm and wheel type complete set suitable for 63 mm dia model ww-90 two ton capacity wt. approximate 322 kg. each (As per rate MPUCSR item no.-8.22.1)
19Providing of screw shaft 63 mm dia including cost of turning, threading and seal making 4.00 mtr. Long.
20Providing, casting and making G.M. nut for shaft 63 mm dia including cost of casting, turning, boring threading and collar making.
21Providing of bolt nut and washer off size.
22ADD GST 18% PART B
23Part-C:- Maintenance and painting work of head regulator steel structurework in head regulator of URC at Rajghat
24Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
2520 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand)
26Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
27Painting with synthetic enamel paint of approved brandand manufacture to give an even shade : Two or more coats on new work
28Painting on old rusted steel surface of gates and appurtenances after prepearation of surface properly by sand blasting process and applying two coat of zinc rich primer and two coat solvent less epoxy paint including cost of all material labour T&P and scaffolding required for proper completion of work . as per IDUP Mechanical SOR [email protected] per sqm.(including gst rate = 1232+221.76=1453.76)

AI Tender Summary

OUR REF NO 49707928
AUTHORITY Government Departments
TENDER VALUE 16.87 Lakhs
LAST DATE 24-06-2025
Authority
Authority Name betwa river board
Work Description Special Repair And Maintenance Of Service Gate, Emergency Gate And Painting Of Lower Rajghat Canal (Lrc) At Rajghat Dam
Basic Detail
Tender No 02/25-26/EE, Raj Dam Env. L.A. Division,Rajghat
Bidding Type Tender
Location
City rajghat
State Uttar Pradesh
Key Dates
Publish Date 17 Jun 2025
Submission Date 24 Jun 2025
Open Date 25 Jun 2025
Finance
Tender Value 16.87 Lakhs
Tender Fee 2360
EMD 33750
Exemption Not Available
Document List
170_TenderDocument.pdf
BOQ_909297.xls
Tendernotice_1.pdf
2e850a85-23d8-4d5f-84ff-dda67e820c48.html

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jun 17, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Jun 24, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jun 25, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

170_TenderDocument.pdf

xls

BOQ_909297.xls

pdf

Tendernotice_1.pdf

html

2e850a85-23d8-4d5f-84ff-dda67e820c48.html

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender