Providing Walking Track, Gym Items And Water Supply In Shivalayam Street East Side Park In 42Nd Division, In Circle - I Area-Engaging 110 hp / Hydraulic Excavator Excavator for removing of high berms,waste materials ,tree trunks,sectioning ,lifting material including cost and conveyance of material as directed by the departmental authorities. Engaging of Tractor for removing the debris including cost loading, transportation and unloading charges, labour charges and any other incidental charges etc., complete as directed by the departmental authorities Providing Gravel spreading in layers not more than 150 mm thick, sectioning to required camber and gradient, watering and compacting each layer to protors density with OMC compaction using 80 to 100 KN capacity vibratory roller including cost and conveyance of all materials, water etc., to site, hire and operational charges of power roller and other T&P etc., complete duly maintaining the required camber and gradient in the formation as directed by Engineer-in charge . Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational incidentalm labour charges such as shoring, sheeting, planking, struting, etc, complete for finished item of work including seigniorage exclduing dewatering charges etc, as per SS - 20 B (APSS 308) Collection and Supply of Dust for filling including Cost and coneyance, Spreading, Sectioning etc., complete. Providing concrete for plain concrete (M10) using 220 Kgs Cement ,40 mm nominal size hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH Providing concrete for plain concrete (M20 Design mix) using 343 Kgs Cement 40mm,20 mm,10mm nominal size Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH Supplying, fitting and placing HYSD bar reinforcement as per drqwings and technical specifications clauses 1000 and 1202 MORD & 1100, 1600 MORTH for bars below 36mm dia including over laps and wastage, where they are not welded including cost and conveyance of binding wire and preparation and tying grills and fixing in position and labour charges etc., complete Supply and placing of the RCC M20 (Design Mix) concrete corresponding to IS 456 using 60% of mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) 40% of 12mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, cement 350Kgs including cost and conveyance of all materials like cement, fine aggrregate (sand) coarse aggregate, water etc., to site and all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work. Supply and fixing of C.C. Kerb not less than M35 strength of size 600 X 450 X 110 mm thick with bottom thickness of 110 mm upto height of 300 mm and top width of 50 mm thick chamfering with 45° at starts at 300 mm height to 375 mm height as selected by the Engineer-in-charge from approved source/ factory which is laid on existing CC Bed in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and including cost and conveyance of all materials & labour charges including transportation from approved source, loading & unloading charges including contractor profit & overhead charges complete for finished item of work Filling with gravel & sand mix of 70% and 30% respectively including cost and conveyance, spreading, sectioning etc., consolidation with mechanical plate vibrated / mini hand driven power roller. Brick Masonry work in CM (1:6) proportion with manufactured Fal-G Blocks of size 290 x 200 x140mm using flyash of 80kgs, cement of 15kgs. Gypsum of 5kgs. And stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compresive strength not less than 50kg/sqm for walls for Superstructure walls. Plastering for walls in CM (1:4) 12mm thick including cost and conveyance of all materials, labour charges for mixing of mortor watering curing etc. complete Supply . Delivery, laying and jointing of precast concrete blocks for paving of M-35 grade and thickness not less than 60 mm for Medium traffic areas conforming to IS 15658:2006 as per drawings and technical specifications as directed by departmental authorities Painting, priming coat on new plastered surface to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS Painting with Priming Coat to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS Painting with Synthetic Enamel Paints -Two coats -for New Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS). Supply and delivery of RCC design benches with length 1.5 mts, width 0.45 mts, heigth 0.60 mts with arms and back rest including cost of bench, making charges, unloading and unloading charges, transportation to the site etc as directed by the departmental authorities Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. 160 mm dia PVC pipe 8 Kgs/cm2 Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. 250 mm dia PVC pipe 6 Kgs/cm2 Labor charges for providing of filter point by cutting slots to 160mm PVC pipe but excluding cost of pipe etc., complete as directed by the departmental authorities Supply and delivery of 160mm dia PVC dummy including cost and conveyance of work site etc., complete as directed by the departmental authorities Providing Solvent Cement / Gum 1000ml for the pipe joints and as directed by the departmental authorities.(BMW-G.149) Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 200/225/300 /350/450 mm hole (for insertion of 110/140/160/180/200mm PVC Pipe / 175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burried channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebullied pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, clamps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per ISI specification used for rotary tube well. The 117 pebbled gravel packing should be carried out in such a way that the theoritical quantity consumed completely.The entire work to be carried out as per I.S. 2800 Part - I & II of 1979 and including cost of all materials and all labour charges and excluding all taxes etc.,Drilling of Bore well 350/450mm dia for insertion of pipe dia of 160/175/200 mm Supply and delivery of Bentonite powder including cost and conveyance of all materials as per SS M-071, MAT-00235 Supply and Transportation of ………..,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding, pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 240V ± 10% , Single Phase 50 Hz AC supply, etc complete for 4 Bore well.Makes: As per list of recommended brands as category II.MAT-03647 Supply of ……...ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990.Makes: As per list of recommended brands as category I 3 core, 2.5 Sq mmMAT-02773 Supply and Fixing of 20mm dia. 1.40 to 1.55mm thick surface P.V.C. pipe (ISI MARK) with all accessories fixing on chromium plated metallic base saddles including Hot Dip galvanized 20/18 SWG 12 Module box for switches for Light, Fan and separate plug point including all labour charges etc., complete. Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) OD 40 mm 10.0 kg/ sqcm MAT-07310 Supply and fixing of MS clamp set (2 Nos) suitable for 32mm dia pipe with 8Nos nut & bolts S& F31.75mm dia GI bend Ist quality MAT-01840, BMW-F.09 S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 40 mm NB Size MAT-01849, BMW-F.25 Supplying & fixing Gunmetal (GM) Horizontal Check (Non return) Valve as per IS-778 I-class heavy duty - 40 mm NB Size MAT-01855, BMW-F.37 S& F 40 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete. MAT-05247, BMW-F.87 Fabrication , transportation and supply of suitable size panel board for single phase submersible motor 2 to 3HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of complete.,.Makes: As per list of recommended brands Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length. OD 50 mm, 10.0 kg/ sqcm, MAT 07311 OD 50 mm, 6.0 kg/ sqcm, MAT 07261 Laying, jointing of PVC/HDPE pipes as per BIS No.7634 part II/75 for PVC and BIS No.7634 part-II/75 for HDPE pipes including trench excavation and refilling. LAB-00606 Providing Water Tap With Garden Faucet - GI 1/2 Outside Garden Tap Easy Turn On/Off Lever Handle Water Supply Faucet, with required GI/PVC Specials Like Saddles, Nipples, Elobws Etc., and Laying concrete around the outlet of size 0.23x0.23mts with depth of 0.45mts (approx. as per site condition) including cost of all materials charges, skilled plumber wages, labour charges or any other incidental charges etc., complete as directed by the departmental authorities Sky Walker Double*Dimensions: 1700 mm (L) X 830 mm (W) X 1650 mm (H). Supply, Delivery and Commissioning of SKY WALKER with main frame shall be minimum of 80mm NB dia of thickness not less than 4.50mm & Handle pipes shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of C class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded with Plastic/Rubber grips at handle grip hold. The handle pipes are hinged over 80NB main frame with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Pins should be case hardened and centreless grinded finish for life long durability. The handle pipes shall be further extended to the 32mm NB dia on both sides. Paired rectangular tubes with four foot rests are linked to main frame. Foot rest shall be made of Aluminum material - LM26 grade. Total footrest structure is supported on base frame shall be made up of rectangular pipe of 48 X 48 X 2.9 mm and side frames shall be made up of 32mm NB dia GI Pipes. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick M.S. plate with Kakinada Smart City Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity. Air Walker Double*Dimensions: 2115 mm (L) X 390 mm (W) X 1420 mm (H)Supply, Delivery and Commissioning of DOUBLE AIR WALKER with three prime stand pipes shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Pedestal frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Handle frame shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of C class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The two pedestal frames are hinged over 100NB prime stand pipes with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Foot rest shall be made of Aluminum material - LM26 grade.All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with Kakinada Smart City Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity. Seated Puller Double **Dimensions: 1740 mm (L) X 740 mm (W) X 1850 mm (H)Supply, Delivery and Commissioning of SEATED PULLER DOUBLE with prime stand pipe shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Handle frame & Seat frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Connecting links shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of C class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The two handle frames are hinged over 100NB prime stand pipe with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Seat & Back rests are made with the GI Sheet of 1.8 mm thickness with dip drawn pressed with uniform bending of 20mm to have free from sharp edges & burrs. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750 mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with Kakinada Smart City Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity. Chest Press Double*Dimensions: 1600 mm (L) X 710 mm (W) X 2150 mm (H)Supply, Delivery and Commissioning of CHEST PRESS DOUBLE with prime stand pipe shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Handle frame & Seat frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Connecting links shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of C class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The two handle frames are hinged over 100NB prime stand pipe with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Seat & Back rests are made with the GI Sheet of 1.8 mm thickness with dip drawn pressed with uniform bending of 20mm to have free from sharp edges & burrs. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750 mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with Kakinada Smart City Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity. Cross Trainer*Dimensions:1200 mm (L) X 500 mm (W) X 1500 mm (H)Supply, Delivery and Commissioning of CROSS TRAINER with prime stand pipe shall be minimum of 80mm NB dia of thickness not less than 4.50mm, pedal link pipe shall be minimum of 40mm NB dia of thickness not less than 4.1mm, handle frame pipes shall be minimum of 25mm NB dia of thickness not less than 3.60mm and handle grips shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of C class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The pedal frame are hinged over 80NB prime stand pipe with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Foot rest shall be made of Aluminum material - LM26 grade. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750 mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with Vijayawada Municipal Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity. Triple Standing Twister*Dimensions: 1570 mm (L) X 1570 mm (W) X 1350 mm (H)Supply, Delivery and Commissioning of STANDING TRIPPLE TWISTER with prime pipe shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Standing twister plate support pipe shall be minimum of 80mm NB dia of thickness not less than 4.5mm, Bottom frame support shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Handle ring shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of C class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The twister plate is hinged over 80NB standing pipe with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750 mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with Kakinada Smart City Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity. Horse Rider*Dimensions:1000 mm (L) X 695 mm (W) X 1000 mm (H)Supply, Delivery and Commissioning of HORSE RIDER with main frame shall be minimum of 100mm NB dia of thickness not less than 5.00mm, handle frame & Seat frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Connecting link pipes shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of C class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The handle frame are hinged over 100NB main frame with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Seats are made with the GI Sheet of 1.8 mm thickness with dip drawn pressed with uniform bending of 20mm to have free from sharp edges & burrs. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of bearings and bushes shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750 mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with Kakinada Smart City Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity. Rower*Dimensions : 1200 mm (L) X 1000 mm (W) X 800 mm (H)Supply, Delivery and Commissioning of ROWER with base link pipe shall be minimum of 100mm NB dia of thickness not less than 5.00mm, upper link pipe shall be minimum of 50mm NB dia of thickness not less than 4.1mm & Connecting links & handle links pipes shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of C class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns ionized coated and zinc dipped joint with robotic welded. The handle frame are hinged over 100NB base link pipe with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Seats are made with the GI Sheet of 1.8 mm thickness with dip drawn pressed with uniform bending of 20mm to have free from sharp edges & burrs. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All bearings and bushes shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750 mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with Vijayawada Municipal Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity Single Sit Up Board Dimensions:1800 mm (L) X 450 mm (W) X 900 mm (H)Supply, Delivery and Commissioning of SIT UP BOARD SINGLE with footrest support & sit up board pipe shall be of 50 mm NB dia of thickness not less than 4.1mm. Handle frame & seat frame support shall be minimum of 32mm NB dia of thickness not less than 3.6mm are of C class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. Sit Up Board frame is made with high quality FRP / SS 304 perforated material. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. The foundation pipe with anchoring shall be 750 mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with Kakinada Smart City Corporation emblem and your company emblem at two sides Thaichi Spinner 4 Wheel *Dimensions: 1230 mm (L) X 520 mm (W) X 1500 mm (H)Supply, Delivery and Commissioning of THAI CHI SPINNER 4 WHEEL with center pipe shall be of minimum 100mm NB dia of thickness not less than 5.00 mm, support frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & THAI CHI SPINNER rings shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of C class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded with Handle knobs are made from high quality nylon material. The rings are hinged over 32NB support frame with the help of specially heavy-duty bearings should be reputed SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8 mm. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with Kakinada Smart City Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity.
