Tender For Pulivelil Devaswom In Haripad Group New Wiring To The Newly Constructed Thidapally.Rewiring To The Anakkottil And Bhajakapura-Reg (Re-Tender)-- 1 Dismantling and removing the existing damaged electrical installations and stacking carefully. 2 Wireman 3 Wireman Helper 4 Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20mm with specials conforming to IS 9537 Part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50cm or concealed suitably and with 1.00Sq.mm FRLS PVC insulated stranded single core copper conductor cable 650V grade including providing switch board main and continuous earthing with No.14 SWG bare copper, required quantity of copper earth socket, brass bolt and nut crimping / soldering etc. complete with suitable size modular type metal switch boxes, modular type front plates (white), etc. up to and including 6A modular type SP switches and making good the surface of wall colour washing, etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts, etc. as required (ROHS complaint modular accessories). 5 Single control light point with 6A, 3 plate ceiling rose – short point. 6 Single control light point without 6A, 3 plate ceiling rose – short point. 7 Combined plug point with 6A, 5 pin plug socket controlled by 6A switch in the same switch board as that of light points 8 Single control light point with 6A 3 plate ceiling rose – medium point 9 Single control light point without ceiling rose – medium point. 10 Single control light point with 6A 3 plate ceiling rose – long point. 11 Single control point without ceiling rose – long point. 12 Supplying and fixing following size/ modules GI box along with modular base cover plate for modular switches in recess, etc. as required.4 Module (125mmx75mm) 13 Supplying and fixing following modular switch / socket on the existing modular plate and switch box including connections but excluding modular plate, etc. as required. 14 15/16 Amp switch 15 6 Pin 15/16 Amp socket outlet 16 Supply and fixing following size bulb to the existing points. 17 9W LED normal size bulb 18 50W LED Large size 19 Supply and Fixing 200 mm Plastic sill shade 20 Supplying and fixing PVC batten / angle holder including connection as required. 21 Supplying and fixing brass pendent holder to the existing points and giving connections, etc. as required. 22 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm 23 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required. 24 3 X 1.5 sq.mm 25 3 x 2.5 sq. mm 26 Supply and laying of DWC pipe in ordinary soil 0.75m below ground level including excavation. 50/38mm or nearest size 27 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 6Sq.mm 28 Supplying and making end termination with brass compression gland and aluminium lugs for followingssize of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1kv grade as required. 2 x 6 Sq.mm (19mm) 29 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 2 Core 6 Sq.mm with factory made clamp. 30 Earthing with GI earth pipe 2.5 meter long 40mm dia including accessories and providing masonry enclosure with cover plat having locking arrangement and watering pipe, etc. with charcoal / coke andsalt, as required. 31 Supply and drawing bare earthing conductors of the following sizes along with wiring / cables and giving connection as required. 2.65mm copper conductor (12 SWG) 32 Supply of superior quality copper earth socket for the following size of earth conductor including crimping, etc. as required. 2.65mm (12 SWG) 33 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing, etc. as required. (But without MCB / RCCB / Isolator) 8 Way Double Door 34 Supply and fixing following rating 4 Pole, 415V isolator in the existingMCB DB complete with connections, testing and commissioning, etc. as required 40A 35 Supply and fixing 5A rating 240/415V, C curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning, etc. as required. Single pole 36 Supplying and fixing following rating, double pole (single phase and neutral), 240V, residual current circuit breaker (RCCB), having a sensitivity current up to 30mA in the existing MCB DB complete with connections, testing and commissioning, etc. as required. 40A 37 Supply and fixing 5 amps to 32 amps rating240/415V, C curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning, etc. as required. Double pole 38 Supply, conveyance, installation, testing and commissioning of 400mm sweep wall mounting fan using mounting brackets supplied along with the fan 39 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required. 40 32A/415V Kit kat fuse unit 41 32A, 2 way neutral links mountedon DMC / SMC base. 42 Supply, conveyance, installation, testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps, etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire confirming to relevant ISS and giving connections as required. 1200mm 1x20W LED lamp with box type fixture. 43 Supply, conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105 lumen/W 4000-6000K with IP 66 protection LED chip make Crec / Lumilled / Nichea with power factor greater than 0.95 at full load, internal surge protection upto 8kV and aluminium pressure die cast powder coated housing acrylic cover complete with THD less than 10% power factor greater than 0.98, RoHs compliant, duly wired up for use on 230V A.C. supply. Driver compartment should be separately accessible for maintenance (LM 79 & 80 certificate from NABL accredited third party lab to be produced mentioning chip manufacturer) 44 Supply and providing PVC cable entry box / junction box having size of 24x19x11 cm with hinged front door construction consisting with channel suitable for fixing 4 pole isolator and 16A 2 way neutral link, etc. entire box fixing on the existing lamp pole with suitable clamp, nut and bolt, etc. as required. (SINTEX GSJB 2014) 45 Supply, installation, testing and commissioning of bulkhead fittings with 8W LED lamp complete with all accessories including connection etc.
