Withdrawing And Lowering Of Lowlift Submersible Pumping Machineries And Replacement Of Damaged Lighting Luminaries At Bhaburia Head Works Site Under Gourbazar-Ichapur Water Supply Scheme., Paschim Bardhaman-West Bengal

Withdrawing And Lowering Of Lowlift Submersible Pumping Machineries And Replacement Of Damaged Lighting Luminaries At Bhaburia Head Works Site Under Gourbazar-Ichapur Water Supply Scheme. 1 Submersible Pump withdrawing portion:- 2 Withdrawing of submersible pumping machineries from old river bed Tube Well along with Column pipe after disconnection of all pipe line and power line connection with the help of Derrick and Chain Pulley arrangement by engaging skilled technician as per direction of EIC. 3 Making a bamboo trap (Just like tripod) approx height= 20 Mtr, for withdrawing of submersible pump-motor set, making this arrangement for sand errosion from river bed due to this caused height of casing is increased, old river bed Tube Well along with Column pipe after disconnection of all pipe line and power line connection with the help of Derrick and Chain Pulley arrangement by engaging skilled technician as per direction of EIC. 4 Making straight through joint between 1.5 mm2 or 2.5 mm2(motor cable) and 3 core X 4/6 mm2 submersible flat copper cable for extension of motor cable up to required lengh by supplying necessary seal kit to make joints leak proof all complete as per direction. (Without Kit). 5 Lighting luminaries Portion:- 6 Dismantling and lowering of the indoor lighting luminaries and after disconnection of electrical connection etc as per direction. 7 Dismantling and lowering of the outdoor lighting luminaries from the top of the pole as well as outside of pump house and OHR by using of scaffolding arrangement after disconnection of electrical connection etc as per direction. 8 Supply of 250 Watt High efficiency High-efficiency IP66 innovative LED floodlight with pressure die-cast aluminium housing and toughened glass in the front with unique flood optics to ensure uniform distribution and savings upto 50% as compared to conventional system. (Make-Approved Make) 9 Supply of 2 ft. long 18 Watt LED Tubelight Slim LED batten with aluminium housing and polycarbonate diffuser is an ideal replacement solution for existing battens/fluorescent lamps with elegantly designed end caps. (Make-Approved Make) 10 Supply of 90 Watt. LED Highly efficient IP-66 LED street-light with aluminium pressure die-cast housing, toughened glass in the front and peanut lens for batwing light distribution, higher spacing between poles and maintenance-free system. (Make:-Approved Make) 11 Supply of 4 ft. long 36 Watt LED Tubelight Slim LED batten with aluminium housing and polycarbonate diffuser is an ideal replacement solution for existing battens/fluorescent lamps with elegantly designed end caps. (Make:-Approved Make) 12 Supply of 12 Watt Ultra slim surface-mounting square LED downlighter designed with excellent thermally managed aluminium pressure die-cast housing with heat-dissipating fins for larger surface area finished in epox powder-coated white to deliver high efficacy light output and uniformity utilising edge-lit technology. (Make:-Approved make) 13 3 Core X 1.5 Sqmm industrial flexible copper cable wire/dia-30/0.25 PVC insulated with PVC sheathed. (Make:-Approved Make) (For Panel feeder to switch board) 14 Fixing only Single LED Batten light fitting complete with all accessories directly on wall by screws etc. 15 Fixing only Flood light Fitting with suitable tie clamps and MS Plate for mounting on Tower. 16 Fitting & fixing of the outdoor lighting luminaries along with new & old accessories to the pole and sub-station building etc as per direction of EIC. 17 Fitting & fixing of the indoor lighting luminaries along with new & old accessories to the pole etc as per direction of EIC. 18 Add GST @ 18% 19 Add CESS @ 1%

Refer document

Refer document