Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #49674284

Tender For Repairs To Hardstanding, Path, Interlocking Tiles, Chequered Tiles, Perimeter Compound Wall, Security Fencing, Barbed Wire, Security Gates, Baby Wall, Temproary Sheds At Various Loc Of Nad Expl, Non Expl And Tunir Area Under Age B/R-Ii At

Issued by Statutory Bodies & Commissions/Committees · karanja, Maharashtra
Tender Value
90 Lakhs
Estimated cost
Bid Submission
12 Jul 2025
0 days left
EMD
1.60 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
karanja → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Repairs To Hardstanding, Path, Interlocking Tiles, Chequered Tiles, Perimeter Compound Wall, Security Fencing, Barbed Wire, Security Gates, Baby Wall, Temproary Sheds At Various Loc Of Nad Expl, Non Expl And Tunir Area Under Age B/R-Ii At Ns Karanja

BOQ

NAME OF WORK : REPAIRS TO HARDSTANDING, PATH, INTERLOCKING TILES, CHEQUERED TILE, PERIMETER COMPOUND WALL, SECURITY FENCING, BARBED WIRE, SECURITY GATES, BABY WALL, TEMPORARY SHEDS AT VARIOUS LOCATIONS OF NAD EXPLOSIVE, NON EXPLOSIVE AND TUNIR AREA UNDER AGE B&R-II AT NAVAL STATION KARANJA
Sl. No. Item Description
1Demolition of stone/brick masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings dressed stone work and pre cast concrete articles, complete all as specified and directed by Engr-in-Charge.
2Material and Labour for walling of random rubble, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.
3-Ditto- all as peritem No 2.00 hereinbefore but except stone. Note:- Stone obtained from item No 1.00 shall be reused.
4Material and Labour for brickwork with sub class \"B\" bricks , straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.
5-Ditto- all as peritem No. 4.00 here-in-before but except bricks.
6Material and Labour forraisedpointing to random or polygonal rubble masonry uncoursed or brought upto course in CM (1:4), complete all as specified and directed by Engr-in-Charge.
7Demolition of stone/brick masonry, built in cement mortar including all quoins, arches, pillars etc. including ashlar facings dressed stone work and pre cast concrete articles andprecastconcrete block walling, complete all as specified and directed by Engr-in-Charge.
8Material and Labour for pre-cast cement concrete block masonry with solid blocks in 10cm in width in type B1 (1:2:4) and setting in mortar (1:6), complete all as specified and directed by Engr-in-Charge.
9Material and Labour for Raking out joints/ pointing random rubble or polygonal rubble uncoursed or brought up to courses and Raised pointing to randomor polygonal rubble, uncoursed or brought upto courses in CM (1:4), complete all as specified and directed by Engr-in-Charge.
10Material and Labour for Providing, cement concrete in Type B1 1:2:4 (20 mmgraded aggregate) as in copings, including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed by Engr-in-Charge.
11Taking down cement plaster on brick walls orstone walls etc includingraking out joint, hacking for key, scrubbing down with water etc including removing debris directed for a distance max upto 500m, complete all as specified and directed by Engr-in-Charge.
12Material and Labour for rendering 15 mm thick on fair faces of brick/concrete surfaces with two coats i.e. (10 mm thick backing coat in CM (1:4) and 5mm thick finishing coat in CM (1:4)) , finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.
13Material and Labour for Preparing surfaces plastered orunplastered on walls and applying two coats of colour wash, complete all as specified and directed by Engr-in-Charge.
14Material and Labour for rendering 15 mm thick on fair faces of brick/concrete surfaces in CM (1:4) , finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.
15Material and Labour for preparation of new or previously untreated plastered surfaces of wallsand applying two coats of acrylic antifungal paint exterior grade paint plain or camouflage patternon one coat of primer, complete all as specified and directed by Engr-in-Charge.
16Material and Labour for preparation of new or previously untreated plastered surfaces of wallsand applying two coats of oil bound distemper over one coat of primer complete all as specified and as directed by Engr-in-Charge.
17Demolition of cement concrete in ground floor and paving not exceeding 15cm thick (below or above ground level) unreinforced, complete all as specified and directed by Engr-in-Charge.
18Material and Labour for cement concrete1:2:4 type B2 (using 40mm graded stone aggregate) as in surface channel or drain, complete all as specified and directed by Engr-in-Charge.
19Material and Labour for cement concrete1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations, fillings & Mass concrete, complete all as specified and directed by Engr-in-Charge.
20Material and Labour for PCC 1:2:4 type B2 using (40mm graded aggregate), thick as in flooring / hardstanding, complete all as specified and directed by Engr-in-Charge.
21Material and Labour for PCC 1:3:6, type C2 (using 40 mm graded aggregate) 75 mm thick without using extra cement as in plinth protection, complete all as specified and directed by Engr-in-Charge.
22Dismantling of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar, complete all as specified and directed by Engr-in-Charge.
23Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed by Engr-in-Charge.
24Material and Labour for Chequered cement concrete tiles 30cm x 30cm x 25mm thick set jointed and pointed in neat cement slurry in floors with in equal proportions & pigments with red and yellow colour over including 20mm thick screed bed in CM 1:6 , complete all as specified and directed by Engr-in-Charge.
25Material and Labour for PCC 1:2:4 type B1 using (20 mm graded aggregate) as in kerbing all around of chequered tile/paver block, complete all as specified and directed by Engr-in-Charge.
26Demolition of reinforced (reinforcement cut as required to facilitate demolition) cement concrete in ground floors and paving not exceeding 15 cm thickness( below or above ground level) , complete all as specified and directed by Engr-in-Charge.
27Material and Labour for precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) set in cement mortar (1:6) work for landings, cover slabs, manholes, chajjas, water troughs, manger shelves and similar articles with plain faces, complete all as specified and directed by Engr-in-Charge.
28Material and Labour for mild steel TMT bars 6 to 8mm dia and over cut to length bent shape as required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S, complete all as specified and directed by Engr-in-Charge.
29Material and Labour for Formwork to flat chullah hoods, chajjas, troughs and similar items including edges, complete all as specified and directed by Engr-in-Charge.
30Dismantling structural steel work including doors, gates but excluding framed truss etc, complete all as specified and directed by Engr-in-Charge.
31Supply and Fix Framed work such as grills, gratings, sun shed etc with ends of bars shouldered and/or riveted or welded, or forged into spikes, framed guard bars, fencing angle including cutting top to shape as directed, barred iron doors, ladders, farmed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290-0 or E-165 , complete all as specified and directed by Engr-in-Charge.Note:- Posts/struts of angle iron made to shape shall be welded to existing angle iron bracket of security wall, contractor shall make his own arrangement for welding for boundary wall by using gen sets or any alternative arrangement all as specified and directed by Engr-in-Charge.
32Supply and Fix Steel work in tubular trusses, pillars and purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240, complete all as specified and directed by Engr-in-Charge.
33Supply and Fix of Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks, heavy, for large gates, hook and pintle hinges; large hasps and stables; chains; hand made sliding bolts; clamps; hold fasts; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde -165. complete all as specified and directed by Engineer-in-charge.
34Supply and Fix premoulded cast iron gate of FE-150 confirming to IS ornamental type in cast iron cum mild steel of 6.20 span, 3.0m to 4.065m in height two leaves and wicket gate in cast iron cum mild steel of 1.5m span, 2.1m heightin single leaf, including necessary welding, pintol hinges, steel ball bearing plates and locking arrangement, complete all as specified and directed by Engr-in-Charge. Notes:- (a) Frame of cast iron gate shall be mild steel pipe frame of size 50mm x 50mm x 4.5mm thick conforming to grade Fe-410 or Fe-310.(b) RCC pillar/ brick pillar and painting to steel surface including all connected items shall be measured and paid separately under relevant items. (c)Design as per directed by Engr-in-Charge.
35Supply and Fix mild steel works as in doors, gates in ornamental of angle or other sections with gusset plates, rails, braces etc complete drilled, welded etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing confirming to Fe-410 (Gde E-250 Quality-A), complete all as specified and directed by Engr-in-Charge.
36Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed by Engr-in-Charge.
37Taking down and refixing for mild steel gate & wicket gate area not exc 10 Sqm each at any size including welding/cutting and fixing in RCC Column, complete all as specified and directed by Engr-in-Charge.
38Material and Labour for Preparation of new steel surface of anydescriptionnot otherwise described, over10 cm widthor girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-Charge.
39Material and Labour for Preparation of old painted steel surface of anydescriptionnot otherwise described, over10 cm widthor girth and applying one coat of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.
40Supply and Fix in repair Galvanized 2 stand Steel Barbed wire 2.24mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel pins, etc including taking down of existing barbed wire as directed (each line wire to be measured) complete all as specified and directed by Engr-in- Charge
41Restrainingresecuringincluding making good staples or tightening of cross wire galvanised barbed wire in any dia of wire or any spacing all as specified and directed by Engr-in-Charge.
42Taking down existing angle iron from wall embedded in PCCand refixing in the same opening/position complete all as specified and as directed by Engr-in-Charge.
43Providing and fixing in repair concertina coil fencing with punched tape concertina coil 600 mm diahaving 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 1.5m to 3.00 m apart and stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, complete all as specified and directed by Engr-in-Charge.
44Taking down and refixing in same position after repairing of damage of fencing postconcertina coil any dia reinforced punched(chrome razor or blade wire with barbed top of 0.5mm thick galvanised sheet and core wire of dia 2.5mm of high tensile steel wire including galvanised MS staples/Clips for tying at crossing, complete all as specified and directed by Engr-in-Charge.
45Supply and Fix mild steel security chain link fencing 50 mm x 50 mm with PVC coated mesh made out of 3mm dia MS wire and 1.00mm thick PVC coating throughout fixed to RCC post including binding wire complete and including taking down of existing chain link fencing, complete all as specified and directed by Engr-in-Charge.
46Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, complete all as specified and directed by Engr-in-Charge.
47Supply and Fix mild steel screw bolts 10mm dia with hexagonal or square heads at one end and screwed at other ends dia of shank 5 to 10 mm and length of bolt exc. 5cm but not exc 10cm, complete all as specified and directed by Engr-in-Charge.
48Supply and Fix mild steel round bars 10mm dia and over, in horizontal support for chain link straining of fencing including cut to length, bent to shape required including cranking, bending spirally for hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E-250) , complete all as specified and directed by Engr-in-Charge.
49Cleaning of open drains having inner girth width upto 0.60m and depth upto 1.2 metre by removing mud, sludge silt, garbage, debris, sludge, vegetation etc and 1 metre both side of drain also clear as vegetation and levelling the earth work and removing debris by manually or mechanically form out of MoD land complete all as specified and directed by Engr-in-Charge
50Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed by Engr-in-Charge.
51Supply and Fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws , complete all as specified and directed by Engr-in-Charge.
52Supply and Fix pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge.
53Material and Labour for Pre-Cast Factory made RCC 1:1.1/2:3 (20mm Graded crushed stone aggregate) as in cover slab of manholes, septic tanks, drainage,flooring, bedded, and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 with edges of slab covered with MS angle sections or flat iron or similar articles with plain faces and set in Cement Mortar 1:4, including form work & reinforced with 8mm dia TMT steel 100mmc/c both way, size and shape and pattern as approved by Engr-in-Charge including dismantling of all as specified and directed by Engr-in-Charge
54Material and Labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage wherever required, complete all as specified and directed by Engr-in-Charge.
55Dismantling of cast iron or reinforced concrete drain pipes , jointed in cement mortar and taking out of trenches, if required of following sizes :-
56(a)300mm dia
57(b)200mm dia
58Material and Labour for Reinforced concrete pipes 300mm dia, class NP2, laid and jointed complete with collars , complete all as specified and directed by Engr-in-Charge.
59Material and Labour for Reinforced concrete pipes 200mm dia , class NP2, laid and jointed complete with collars, complete all as specified and directed by Engr-in-Charge.
60Material and Labour for PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipe 300 mm dia after they are laid and tested, complete all as specified and directed by Engr-in-Charge.
61Material and Labour for PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipe 200 mm dia after they are laid and tested, complete all as specified and directed by Engr-in-Charge.

AI Tender Summary

OUR REF NO 49674284
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 90 Lakhs
LAST DATE 12-07-2025
Authority
Authority Name Military Engineer Services
Work Description Repairs To Hardstanding, Path, Interlocking Tiles, Chequered Tiles, Perimeter Compound Wall, Security Fencing, Barbed Wire, Security Gates, Baby Wall, Temproary Sheds At Various Loc Of Nad Expl, Non Expl And Tunir Area Under Age B/R-Ii At Ns Karanja
Basic Detail
Tender No 84455-K/E8
Bidding Type Tender
Location
City karanja
State Maharashtra
Key Dates
Publish Date 14 Jun 2025
Submission Date 12 Jul 2025
Open Date 14 Jul 2025
Finance
Tender Value 90 Lakhs
Tender Fee 1000
EMD 1.60 Lakhs
Exemption Not Available
Document List
Tendernotice_1.pdf
BOQ_800018.xls
SOC84455.pdf
Tenderdocuments84455.pdf
315b1efb-aa33-4197-81c4-00341c57d261.html

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jun 14, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 12, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jul 14, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

Tendernotice_1.pdf

xls

BOQ_800018.xls

pdf

SOC84455.pdf

pdf

Tenderdocuments84455.pdf

html

315b1efb-aa33-4197-81c4-00341c57d261.html

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender