Supply, Installation, Testing And Commissioning Of Of New Ht Metering Cubical And Rmus As Per The Sanction Estimate From Msedcl Owned Water Treatment Plant (Wtp) Behind St Stand Panvel. And Also The Installation Commission As Per Tender- 1 Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (Round) cable 22 kV(E), 3 x 300 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT 2 Providing and erecting Heat shrinkable outdoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessary material as per specification no. CB-JT/HT 3 Providing and erecting Heat shrinkable indoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessary material as per specification no. CB-JT/HT 4 Supplying , erecting & terminating XLPE insulated galvanised steel formed wire armoured (Round) cable 22 kV(E), 3 x 95 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT 5 Providing and erecting Heat shrinkable out door termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessary material as per specification no. CB-JT/HT 6 Providing and erecting Heat shrinkable indoor termination kit for 11 kV (UE)/22 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessary material as per specification no. CB-JT/HT 7 Supplying, installing, testing and commissioning SF 6 Insulated 22kV, 630A, 16kA/3sec, 3 way outdoor, extensible motorised SCADA compatible RMU, internal arc tested as per electric supply company specification consisting of 2 nos. feeder with 2 LBS and 1 no. feeder with 1 VCB. compliant to IEC 62271 - 100, 200 and 102, as per specification no. SW-HTS/RMU SCADA 8 Supplying, installing, testing and commissioning SF 6 Insulated 22kV, 630A, 16kA/3sec, 4 way outdoor, extensible motorised SCADA compatible RMU, internal arc tested as per electric supply company specification consisting of 2 nos. feeder with 2 LBS and 2 nos. feeder with 2 VCB compliant to IEC 62271 - 100, 200 and 102, as per specification no. SW HTS/RMU SCADA 9 Supplying, erecting, testing and commissioning 22KV HT metering cubical (compact type) approved by MSEDCL / licensee fabricated with 2 mm (14SWG) M.S. sheets with supporting angle, painted with powder coating / epoxy paint of required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no. of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos. CT having required ratio between 25/5A to 200/5A, VA 10 or 15, Class 0.2S, epoxy casted 3 nos. PT having ratio 22000/V3/110/V3 VA 50, Class 0.2 suitable for provided trivector meter, and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation 10 Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI 11 Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose). 12 Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. 13 Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. 14 Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP. 15 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½core 400 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL 16 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL 17 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½core 240 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL 18 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 185 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL 19 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 120 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL 20 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 70 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL 21 Making trench in hard murum/Tar road having 0.9 m depth and minimum 0.3mtr width for laying provided cables of voltage range 3.3 kV to 11 kV complete as per specification No. CW-EXN-CTR 22 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. 23 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. 24 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 160 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. 25 Supplying & laying (including excavation) half round reinforced cement concrete pipe of IS 458:2003 NP-2 class of 150 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. 26 Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 100 mm height comprising all required standard accessories. 27 SITC of Main LT Panel at Water Treatment Plant, Panvel: Three phase outdoor type Main LT panel, pre-wired and ready to use, manufactured by an ISO certified company. It should have following specifications: Material: Outdoor type Panel with canopy Including standing arrangement, dust and vermin proof complete with hingedand double door with lockable arrangement madefrom 2 mm thick CRCA sheet steel, The panel shall be given one coat of red oxide primer and two coats of enamel paints. powder coatedwith off white color (inside & outside) : INCOMER (I/C - 1 & 2), R/Y/B Phase Indication Lamp 230V AC, Digital Multifunction Meter, 800/5A 15VA Class:1 , Tape Wound Ring Type CTs, 800A 4P ACB 50KA, EDO type ACB LSIG Release, Under Voltage Release (UVR), Key Lock used for Mechanical Inter Locking Arrangement for Incomer-1 & 2, Breaker Control Switch (TNC Switch), ON/OFF/TRIP Indication Lamp 230V AC, Auto/Manual Selector Switch : Three Position Type, ON Delay Timer 230VAC, Emergency Stop Push Button, Reset Push Button, Auxiliary Contactor 230V AC 2NO+2NC, 6A 10KA SP Control MCB, BUS COUPLER : 800A 4P ACB 50KA, EDO type ACB without Release, Key Lock used Mechanical Inter Locking Arrangement for Bus coupler, ON Indication Lamp 230V AC, 6A 10KA SP Control MCB, Busbar Type: Three phase, 4 wire Electrolytic high conductivity Copper three phase and neutral busbars insulated with heat shrinkable colored PVC sleeves & clip on shrouds for joints, Earth bus arrangement on panel: 1no.earth Copper stud on each side face, OUTGOING : 400A 4P 36KA MCCB - 6 Nos. (400A 4P 36KA Adjustable Thermal Magnetic type, Overload & Short Circuit Protection, Extended rotary handle, Spreader Link, Aux. + Trip Contact, ON/TRIP Indication Lamp 230V AC, 6A 10KA SP Control MCB) & 500A 4P 36KA MCCB - 2 Nos. (500A 4P 36KA Adjustable Thermal Magnetic type, Overload & Short Circuit Protection, Extended rotary handle, Spreader Link, Aux. + Trip Contact, ON/TRIP Indication Lamp 230V AC, 6A 10KA SP Control MCB) 28 SITC of 250KVAr Contactor Based, 7% Detuned Aluminium Reactor APFC Panel at Water Treatment Plant, Panvel: Three phase outdoor type 250KVAr Contactor Based, 7% Detuned Aluminium Reactor APFC Panel, pre-wired and ready to use, manufactured by an ISO certified company. It should have following specifications: Material: Outdoor type Panel with canopy Including standing arrangement, dust and vermin proof complete with hingedand double door with lockable arrangement madefrom 2 mm thick CRCA sheet steel, The panel shall be given one coat of red oxide primer and two coats of enamel paints. powder coatedwith off white color (inside & outside) : INCOMER : R/Y/B Phase Indication Lamp 230V AC, 0-500A AC Digital Ammeter with Inbuilt S/S, 0-500V AC Digital Voltmeter with Inbuilt S/S, 500/5A 15VA Class:1 CTs, 6A SP 10KA MCB, 500A 3P+N 36KA Adjustable Thermal Magnetic type, Overload & Short Circuit Protection , with ROHM, Spreader Link, APFC RELAY WITH ASS. : 8 Stage APFCR Relay, 3CT SENSING, ON-Delay Timer 230V AC, Auto/Manual Selector Switch, 4NO+4NC Auxiliary Contactor 230V AC WITH ADD ON BLOCK, 6A SP 10KA MCB, EXHAUST FAN : 6 Exhaust Fan, Thermostat for Cooling Fan, 6A DP 10KA MCB, OUTGOING : 50KVAr CAPACITOR BANK - 3 Nos. (125A TP 25KA MCCB TM Based Release O/L,S/C with ROHM, Spreader Link, 50KVAr Capacitor duty contactor 440V AC with Add on Contact Block & Spreader Link, 50KVAr- 7% Detuned Aluminium Reactor 440V, 33.1KVAr Capacitor Bank 525V (33.1*2), ON Indication Lamp 230V AC, Start Push Button (1NO), Stop Push Button (2NC)), 25KVAr CAPACITOR BANK - 2 Nos. (63A TP 25KA MCCB TM Based Release O/L,S/C with ROHM, 25KVAr Capacitor duty contactor 440V AC with Add on Contact Block & Spreader Link, 25KVAr- 7% Detuned Aluminium Reactor 440V, 33.1KVAr Capacitor Bank 525V, ON Indication Lamp 230V AC, Start Push Button (1NO), Stop Push Button (2NC)), 20KVAr CAPACITOR BANK - 1 Nos. (40A TP 10KA MCB, 20KVAr Capacitor duty contactor 440V AC with Add on Contact Block, 20KVAr- 7% Detuned Aluminium Reactor 440V, 26.5KVAr Capacitor Bank 525V, ON Indication Lamp 230V AC, Start Push Button (1NO), Stop Push Button (2NC)) , 15KVAr CAPACITOR BANK - 1 Nos. (32A TP 10KA MCB, 15KVAr Capacitor duty contactor 440V AC with Add on Contact Block, 20KVAr- 7% Detuned Aluminium Reactor 440V, 20KVAr Capacitor Bank 525V, ON Indication Lamp 230V AC, Start Push Button (1NO), Stop Push Button (2NC)), 10KVAr CAPACITOR BANK - 1 Nos. (25A TP 10KA MCB, 10KVAr Capacitor duty contactor 440V AC with Add on Contact Block, 10KVAr- 7% Detuned Aluminium Reactor 440V, 13.2KVAr Capacitor Bank 525V, ON Indication Lamp 230V AC, Start Push Button (1NO), Stop Push Button (2NC)), 5KVAr CAPACITOR BANK - 1 Nos. (16A TP 10KA MCB, 5KVAr Capacitor duty contactor 440V AC with Add on Contact Block, 5KVAr- 7% Detuned Aluminium Reactor 440V, 6.6KVAr Capacitor Bank 525V, ON Indication Lamp 230V AC, Start Push Button (1NO), Stop Push Button (2NC)) 29 Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. One Number : As directed by Engineer-in-charge. 30 Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt.total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND( R ) steel quality super durable polyester paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre (Make -Tata/Jindal/Essar ) 31 Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means 32 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. 33 Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 34 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for plain or molded sills, cornice, jambs, block in course, or architraves of required size and shapes including steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be nprovided,finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 35 Providing and fixing M.S. grill door 24 Kilogram/ One Square Metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc 36 Supplying and erecting rolled steel joist (girder) pole 152 x 152 mm (37.1 kg/m) with base plate in provided foundation as per specification no. OHPL/ RSJ 37 Supplying and erecting rolled steel joist (girder) pole 100 x 116 mm (23 kg/m) with base plate in provided foundation as per specification no. OH-PL/RSJ 38 Supplying and erecting G.I. self stay set for pole, including anchor plate 300x300x6mm straining screw, loop-insulator, G.l. stay wire 7/10 SWG, G.l. stay rod 20mmx1.8m long, erected with pole clamps along with angle iron bracket of 50x50x6mm and one meter long fixed to pole at suitable height with suitable MS clamps duly erected in provided C.C. foundations complete. 39 Making cement concrete foundation including excavation (60 x 60) cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal, 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and finishing complete. (for above 9 m poles) 40 Making cement concrete foundation including excavation (60 x 60 x 150) cm deep in 1:3:6 cement concrete, (20 to 25) mm stone metal with necessary curing and finishing complete.(for stay). 41 Supplying & erecting 100 x 50 x 6 mm with 4.7 mm thick web and 7.5 mm thick nflange channel iron cross arm of suitable length for 2.4 m wide DP structure nand erecting on DP with 50x6mm clamp complete as per specification no. OHPL/ BKT 42 Supplying & erecting pole bracket for OH conductor fabricated from ISM channel, 75x40x6mm 1100mm long for necessary nos. of provided insulators and erecting on pole with 50x6mmlamp complete as per specification no. OHPL/ BKT 43 Supplying and erecting V cross arm with ISM channel of 100x50x6mm or 22/33kV HT OH line with arrangement to fix insulator at 45mm from the end & horizontal distance between insulators 1530mm bent at angle of 60 degree keeping base 310mm and the total vertical height of V cross arm as 460mm, and fixed on pole with MS clamp of 80x10 mm, nut bolts, washers complete as per specification no. OH-PL/VCA 44 Supplying and erecting bracket for guarding of HT OH Line, made fromn nchannel iron 1600mm in length and 75x40x6mm. erected on pole complete as per specification no. OH-PL/VCA 45 Supplying and erecting pole clamp made from 50x6mm MS flat for pole or pipe, post erected with 15mm bolts and nuts duly painted with one coat of red oxide and two coats of aluminium paint complete. 46 Supplying and erecting C type (half) clamps for pole made from 50x6mm flat for fixing cross arms by means of 15mm bolts and nuts painted with one coat of red oxide and two coats of aluminium paint complete. 47 Supplying and erecting guarding lace for HT OH line with 8SWG G.l. wire to protect the HT OH line with binding wire of 20SWG G.l. wire for 75mm section on either side. 48 Supplying and erecting GI wire of high purity of required sizes used for earthingnor any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/conduit with screws complete. 49 Supplying and erecting porcelain disc type insulator 70KN with necessary hardware suitable for 22kV line, complete as per specification no. OH-INS/DI 50 Supplying and erecting porcelain pin type insulator suitable for 22kV line with GI pin, complete as per specification no. OH-INS/PN 51 Supplying and erecting ACSR conductor of size - 6/1-4.72 mm (Dog) complete. (394.00 kg/km) as per specification No. OH-CON/ACSR 52 Dismantling the existing pole above 6 m height with brackets, clamps, insulators, stay from the c.c. foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level. 53 Dismantling the existing overhead line including G.I. wires of all sizes without damaging & making the coils in suitable sizes. 54 Dismantling the existing lightning arrestor set, insulator from DP structure complete. 55 Dismantling existing DO / AB switch set complete from D.P. structure in an approved manner. 56 Credit for dismantling of PVC armoured/unarmoured cables and wires (Aluminium) 57 Credit for dismantling of PVC armoured / unarmoured cables and wires (Copper) 58 Credit for dismantling of HG / M.S / G.I. Materials / Poles etc. 59 Credit for dismantling of I.C. / M.C. switches / D.P. / D.B./ T.P. / feeder pillar etc. 60 Providing and erecting Heat shrinkable straight through joint kit for 11 kV (UE)/22 kV ( E ) XLPE HT cable 3x240 to 300 sq. mm. with necessary material as per specification no. CB-JT/HT 61 Providing and erecting Heat shrinkable straight through joint kit for 11 kV (UE)/22 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessary material as per specification no. CB-JT/HT 62 Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 400 sq mm., with necessary material as per specification No. CB-JT/LT 63 Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 300 sq mm., with necessary material as per specification No. CB-JT/LT 64 Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 240 sq.mm., with necessary material as per specification No. CB-JT/LT 65 Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 120 to 185 sq. mm., with necessary material as per specification No. CB-JT/LT 66 Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 70 to 95 sq mm., with necessary material as per specification No. CB-JT/LT
