Tender For Providing New Borewell With Sintex Tank Arrangements Atsathyavanimuthunagar In Panpolitown Panchayat; 1 Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum 2 Supplying and filling in foundation andbasement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. 3 Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification 4 Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 5 slab 6 Column 7 Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part M.Sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc.Complete with std.Specifications.(Using Vibrator)TNDSS NO: 30 V, VI (S3), VII-3. 8 Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors. 9 BRICK WORK in cement mortar 1:5 (One cement and five sand) using best quality of country bricks of size 8 3/4 X 4 1/4 X 2 3/4 for the following including curing etc., complete complying with standard specifications. 10 PLASTERING walls with cement mortar 1:5 (One cement and five sand) 12mm thick in all floors and all exposed surfaces including cost and conveyance of materials to site and all labour charges etc. complete. 11 Painting the new wallsin twocoats with Emulsion paintof approved colour and quality over one coat of primer including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by departmental officers 12 Supply and delivery of MS Kiosk of size 0.75m X 0.50m X 0.75M made up of MS angle of size 50mm X 50mm X 4mm alround covered with 16 gauge MS sheet and Kiosk door made up of MS plates of size 25mm X 3mm including cutting, welding, grinding,locking arrangements and labour charges etc complete 13 Painting new iron works such as steel doors, windows, rolling shutters, ventilators, window bars, balusters etc., with two coast best approved fresh quality and colour of synthatic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc complying with standard specification 14 Supply and delivery of 32mm HDPE hose etc., complete. 15 Conducting the geological survey including cost and all labour charges etc., complete 16 Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc.By first taking a pilot bore of 115mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs fuel, labour and drilling bentonite and water required for drilling at site( Site will be shown by the Engineers) including construction of mud pit. 17 Supply and fixing of 160 mm dia 6ksc/cm2Outer casing Pipeincluding all cost and conveyance of materials to site and all labour charges etc, complete. 18 Supply and fixing of 140 mm dia 6ksc/cm2Outer casing Pipeincluding all cost and conveyance of materials to site and all labour charges etc, complete. 19 Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996including loading, unloading, transportation,and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixingcharges etc., complete (1000 litre) 20 Supply and delivery submersible pump set with ISI mark IS 8034/2002including all cost and conveyance of materials to site and all labour charges etc, complete. (15 *125m 1.5 HP Motor ) 21 Supplying and delivery ofPVC Insulated and sheathed 2.5 Sq mm3 core Flat type copper cable confirming to IS 694 /1990 including cost of materials etc., complete 22 Towards labour charges for the erection of 1.5HP submersible pumpset in borewell/open well including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps pressure gauges upto the exterior wall of pump room and erection of panel board consiting of TPICN switches starter, volmeter, ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc, complete and testing the pumpset and trail run for 10 days 23 Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1 x 1/8 Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1 thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. SD 127. 24 Supply and run of 2 of 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains SD 64 25 Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC.unsheathed Cu. Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable Colourfor open PVC light point / fan point (For electronic regulator) (5 points per coil)SD 18 26 Supply and fixing of 25W LED Street Light Fitting with LED etc., complete. 27 Supply and laying of nylon rope as per standard specification
