|
| 1 | Tata / Eicher/Force 7/11ton/Swaraj Mazda |
| 2 | Engine Cylinder Block main line boring |
| 3 | Cy. Block main bearing brazing, body cap brazing & finishing |
| 4 | EngineCylinder Block Double Sleeve Providing & Fitting |
| 5 | Engine Cylinder Block sleeve/liners removing, refitting, boring & honing |
| 6 | Engine Cylinder Block surface grinding |
| 7 | Engine Cylinder Block Ultrasonic cleaning |
| 8 | Engine Cylinder Block stud removing, oversize tapping & replacing/refitting |
| 9 | Engine Cylinder head crack welding & finishing |
| 10 | Engine Cylinder head leakage testing by pneumatic pressure |
| 11 | Engine Cylinder head surface grinding |
| 12 | Engine Cylinder head valve seat removing & new fitting with material |
| 13 | Engine Cylinder head valve seat cutting with lapping |
| 14 | Engine Cylinder head decorbonizing |
| 15 | Engine Cylinder head rocker bushing replacing |
| 16 | Engine Cylinder head stud removing, oversizetapping & replacing/refitting |
| 17 | Cylinder head valve guide removing, fitting, remering |
| 18 | Engine Crank shaft gear removing & refitting |
| 19 | Engine Crank Shaft bend checking and bend removing |
| 20 | Engine Crank shaft crack testing |
| 21 | Engine Crank shaft floting |
| 22 | Engine Crank Shaft grinding(Main bearing pins & con. bearing pins) |
| 23 | Engine Crank Shaft oil seal seat cutting/seal sleeve fitting |
| 24 | Engine Crank Shaft thrust bearing seat repairing |
| 25 | Engine Crank Shaft case hardening / nytriding |
| 26 | Engine Connecting rod bend checking & removing |
| 27 | Engine Connecting rod parent boring, bush fitting and reaming |
| 28 | Engine Cam shaft bend checking and bend removing. |
| 29 | Engine Cam Shaft grinding |
| 30 | Engine Cam Shaft bush fitting and boring |
| 31 | Engine Air compressor block sleeving,boring and honing. |
| 32 | Engine Air compressor crank grinding |
| 33 | Engine Air compressor crank oil seal portion welding & maching |
| 34 | Engine Cylinder Block crack welding & finishing (major & minor) |
| 35 | Cylinder block water jacket sleeve fitting& pressure testing (tikali with material) |
| 36 | Cylinder head water jacket sleeve fitting & pressure testing (tikali) |
| 37 | Cylinder head injector protectivesleeve removing fitting ‘O’ ring fitting |
| 38 | Engine Cylinder Liner removing & refiting finishEngine Cylinder liner atVehicle depot.Workshop |
| 39 | Engine Cylinder Block Welding Reparing |
| 40 | Tata / Eicher/ Leyland 16.2 ton |
| 41 | Engine Cylinder Block main line boring |
| 42 | Cy. Block main bearing brazing, body cap brazing & finishing |
| 43 | EngineCylinder Block Double Sleeve Providing & Fitting |
| 44 | Engine Cylinder Block sleeve/liners removing, refitting, boring & honing |
| 45 | Engine Cylinder Block surface grinding |
| 46 | Engine Cylinder Block Ultrasonic cleaning |
| 47 | Engine Cylinder Block stud removing, oversize tapping & replacing/refitting |
| 48 | Engine Cylinder head crack welding & finishing |
| 49 | Engine Cylinder head leakage testing by pneumatic pressure |
| 50 | Engine Cylinder head surface grinding |
| 51 | Engine Cylinder head valve seat removing & new fitting with material |
| 52 | Engine Cylinder head valve seat cutting with lapping |
| 53 | Engine Cylinder head decorbonizing |
| 54 | Engine Cylinder head rocker bushing replacing |
| 55 | Engine Cylinder head stud removing, oversizetapping & replacing/refitting |
| 56 | Cylinder head valve guide removing, fitting, remering |
| 57 | Engine Crank shaft gear removing & refitting |
| 58 | Engine Crank Shaft bend checking and bend removing |
| 59 | Engine Crank shaft crack testing |
| 60 | Engine Crank shaft floting |
| 61 | Engine Crank Shaft grinding(Main bearing pins & con. bearing pins) |
| 62 | Engine Crank Shaft oil seal seat cutting/seal sleeve fitting |
| 63 | Engine Crank Shaft thrust bearing seat repairing |
| 64 | Engine Crank Shaft case hardening / nytriding |
| 65 | Engine Connecting rod bend checking & removing |
| 66 | Engine Connecting rod parent boring, bush fitting and reaming |
| 67 | Engine Cam shaft bend checking and bend removing. |
| 68 | Engine Cam Shaft grinding |
| 69 | Engine Cam Shaft bush fitting and boring |
| 70 | Engine Air compressor block sleeving,boring and honing. |
| 71 | Engine Air compressor crank grinding |
| 72 | Engine Air compressor crank oil seal portion welding & maching |
| 73 | Engine Cylinder Block crack welding & finishing (major & minor) |
| 74 | Cylinder block water jacket sleeve fitting& pressure testing (tikali with material) |
| 75 | Cylinder head water jacket sleeve fitting & pressure testing (tikali) |
| 76 | Cylinder head injector protectivesleeve removing fitting ‘O’ ring fitting |
| 77 | Engine Cylinder Liner removing & refiting finishEngine Cylinder liner atVehicle depot.Workshop |
| 78 | Engine Cylinder Block Welding Reparing |
| 79 | Tata / Eicher/ Leyland25 ton |
| 80 | Engine Cylinder Block main line boring |
| 81 | Cy. Block main bearing brazing, body cap brazing & finishing |
| 82 | EngineCylinder Block Double Sleeve Providing & Fitting |
| 83 | Engine Cylinder Block sleeve/liners removing, refitting, boring & honing |
| 84 | Engine Cylinder Block surface grinding |
| 85 | Engine Cylinder Block Ultrasonic cleaning |
| 86 | Engine Cylinder Block stud removing, oversize tapping & replacing/refitting |
| 87 | Engine Cylinder head crack welding & finishing |
| 88 | Engine Cylinder head leakage testing by pneumatic pressure |
| 89 | Engine Cylinder head surface grinding |
| 90 | Engine Cylinder head valve seat removing & new fitting with material |
| 91 | Engine Cylinder head valve seat cutting with lapping |
| 92 | Engine Cylinder head decorbonizing |
| 93 | Engine Cylinder head rocker bushing replacing |
| 94 | Engine Cylinder head stud removing, oversizetapping & replacing/refitting |
| 95 | Cylinder head valve guide removing, fitting, remering |
| 96 | Engine Crank shaft gear removing & refitting |
| 97 | Engine Crank Shaft bend checking and bend removing |
| 98 | Engine Crank shaft crack testing |
| 99 | Engine Crank shaft floting |
| 100 | Engine Crank Shaft grinding(Main bearing pins & con. bearing pins) |
| 101 | Engine Crank Shaft oil seal seat cutting/seal sleeve fitting |
| 102 | Engine Crank Shaft thrust bearing seat repairing |
| 103 | Engine Crank Shaft case hardening / nytriding |
| 104 | Engine Connecting rod bend checking & removing |
| 105 | Engine Connecting rod parent boring, bush fitting and reaming |
| 106 | Engine Cam shaft bend checking and bend removing. |
| 107 | Engine Cam Shaft grinding |
| 108 | Engine Cam Shaft bush fitting and boring |
| 109 | Engine Air compressor block sleeving,boring and honing. |
| 110 | Engine Air compressor crank grinding |
| 111 | Engine Air compressor crank oil seal portion welding & maching |
| 112 | Engine Cylinder Block crack welding & finishing (major & minor) |
| 113 | Cylinder block water jacket sleeve fitting& pressure testing (tikali with material) |
| 114 | Cylinder head water jacket sleeve fitting & pressure testing (tikali) |
| 115 | Cylinder head injector protectivesleeve removing fitting ‘O’ ring fitting |
| 116 | Engine Cylinder Liner removing & refiting finishEngine Cylinder liner atVehicle depot.Workshop |
| 117 | Engine Cylinder Block Welding Reparing |
| 118 | JCB/Tata/ Escorts |
| 119 | Engine Cylinder Block main line boring |
| 120 | Cy. Block main bearing brazing, body cap brazing & finishing |
| 121 | EngineCylinder Block Double Sleeve Providing & Fitting |
| 122 | Engine Cylinder Block sleeve/liners removing, refitting, boring & honing |
| 123 | Engine Cylinder Block surface grinding |
| 124 | Engine Cylinder Block Ultrasonic cleaning |
| 125 | Engine Cylinder Block stud removing, oversize tapping & replacing/refitting |
| 126 | Engine Cylinder head crack welding & finishing |
| 127 | Engine Cylinder head leakage testing by pneumatic pressure |
| 128 | Engine Cylinder head surface grinding |
| 129 | Engine Cylinder head valve seat removing & new fitting with material |
| 130 | Engine Cylinder head valve seat cutting with lapping |
| 131 | Engine Cylinder head decorbonizing |
| 132 | Engine Cylinder head rocker bushing replacing |
| 133 | Engine Cylinder head stud removing, oversizetapping & replacing/refitting |
| 134 | Cylinder head valve guide removing, fitting, remering |
| 135 | Engine Crank shaft gear removing & refitting |
| 136 | Engine Crank Shaft bend checking and bend removing |
| 137 | Engine Crank shaft crack testing |
| 138 | Engine Crank shaft floting |
| 139 | Engine Crank Shaft grinding(Main bearing pins & con. bearing pins) |
| 140 | Engine Crank Shaft oil seal seat cutting/seal sleeve fitting |
| 141 | Engine Crank Shaft thrust bearing seat repairing |
| 142 | Engine Crank Shaft case hardening / nytriding |
| 143 | Engine Connecting rod bend checking & removing |
| 144 | Engine Connecting rod parent boring, bush fitting and reaming |
| 145 | Engine Cam shaft bend checking and bend removing. |
| 146 | Engine Cam Shaft grinding |
| 147 | Engine Cam Shaft bush fitting and boring |
| 148 | Engine Air compressor block sleeving,boring and honing. |
| 149 | Engine Air compressor crank grinding |
| 150 | Engine Air compressor crank oil seal portion welding & maching |
| 151 | Engine Cylinder Block crack welding & finishing (major & minor) |
| 152 | Cylinder block water jacket sleeve fitting& pressure testing (tikali with material) |
| 153 | Cylinder head water jacket sleeve fitting & pressure testing (tikali) |
| 154 | Cylinder head injector protectivesleeve removing fitting ‘O’ ring fitting |
| 155 | Engine Cylinder Liner removing & refiting finishEngine Cylinder liner atVehicle depot.Workshop |
| 156 | Engine Cylinder Block Welding Reparing |
| 157 | TATA 1112 BSVI, 1918 BSVI SIGNA, 1923 BSVI SIGNA |
| 158 | Engine Cylinder Block main line boring |
| 159 | Cy. Block main bearing brazing, body cap brazing & finishing |
| 160 | EngineCylinder Block Double Sleeve Providing & Fitting |
| 161 | Engine Cylinder Block sleeve/liners removing, refitting, boring & honing |
| 162 | Engine Cylinder Block surface grinding |
| 163 | Engine Cylinder Block Ultrasonic cleaning |
| 164 | Engine Cylinder Block stud removing, oversize tapping & replacing/refitting |
| 165 | Engine Cylinder head crack welding & finishing |
| 166 | Engine Cylinder head leakage testing by pneumatic pressure |
| 167 | Engine Cylinder head surface grinding |
| 168 | Engine Cylinder head valve seat removing & new fitting with material |
| 169 | Engine Cylinder head valve seat cutting with lapping |
| 170 | Engine Cylinder head decorbonizing |
| 171 | Engine Cylinder head rocker bushing replacing |
| 172 | Engine Cylinder head stud removing, oversizetapping & replacing/refitting |
| 173 | Cylinder head valve guide removing, fitting, remering |
| 174 | Engine Crank shaft gear removing & refitting |
| 175 | Engine Crank Shaft bend checking and bend removing |
| 176 | Engine Crank shaft crack testing |
| 177 | Engine Crank shaft floting |
| 178 | Engine Crank Shaft grinding(Main bearing pins & con. bearing pins) |
| 179 | Engine Crank Shaft oil seal seat cutting/seal sleeve fitting |
| 180 | Engine Crank Shaft thrust bearing seat repairing |
| 181 | Engine Crank Shaft case hardening / nytriding |
| 182 | Engine Connecting rod bend checking & removing |
| 183 | Engine Connecting rod parent boring, bush fitting and reaming |
| 184 | Engine Cam shaft bend checking and bend removing. |
| 185 | Engine Cam Shaft grinding |
| 186 | Engine Cam Shaft bush fitting and boring |
| 187 | Engine Air compressor block sleeving,boring and honing. |
| 188 | Engine Air compressor crank grinding |
| 189 | Engine Air compressor crank oil seal portion welding & maching |
| 190 | Engine Cylinder Block crack welding & finishing (major & minor) |
| 191 | Cylinder block water jacket sleeve fitting& pressure testing (tikali with material) |
| 192 | Cylinder head water jacket sleeve fitting & pressure testing (tikali) |
| 193 | Cylinder head injector protectivesleeve removing fitting ‘O’ ring fitting |
| 194 | Engine Cylinder Liner removing & refiting finishEngine Cylinder liner atVehicle depot.Workshop |
| 195 | Engine Cylinder Block Welding Reparing |
| 196 | LEYLAND 4225 HAV AVATAR/ EICHER 5016 PRO/ SML PRESTIGE BSVI |
| 197 | Engine Cylinder Block main line boring |
| 198 | Cy. Block main bearing brazing, body cap brazing & finishing |
| 199 | EngineCylinder Block Double Sleeve Providing & Fitting |
| 200 | Engine Cylinder Block sleeve/liners removing, refitting, boring & honing |
| 201 | Engine Cylinder Block surface grinding |
| 202 | Engine Cylinder Block Ultrasonic cleaning |
| 203 | Engine Cylinder Block stud removing, oversize tapping & replacing/refitting |
| 204 | Engine Cylinder head crack welding & finishing |
| 205 | Engine Cylinder head leakage testing by pneumatic pressure |
| 206 | Engine Cylinder head surface grinding |
| 207 | Engine Cylinder head valve seat removing & new fitting with material |
| 208 | Engine Cylinder head valve seat cutting with lapping |
| 209 | Engine Cylinder head decorbonizing |
| 210 | Engine Cylinder head rocker bushing replacing |
| 211 | Engine Cylinder head stud removing, oversizetapping & replacing/refitting |
| 212 | Cylinder head valve guide removing, fitting, remering |
| 213 | Engine Crank shaft gear removing & refitting |
| 214 | Engine Crank Shaft bend checking and bend removing |
| 215 | Engine Crank shaft crack testing |
| 216 | Engine Crank shaft floting |
| 217 | Engine Crank Shaft grinding(Main bearing pins & con. bearing pins) |
| 218 | Engine Crank Shaft oil seal seat cutting/seal sleeve fitting |
| 219 | Engine Crank Shaft thrust bearing seat repairing |
| 220 | Engine Crank Shaft case hardening / nytriding |
| 221 | Engine Connecting rod bend checking & removing |
| 222 | Engine Connecting rod parent boring, bush fitting and reaming |
| 223 | Engine Cam shaft bend checking and bend removing. |
| 224 | Engine Cam Shaft grinding |
| 225 | Engine Cam Shaft bush fitting and boring |
| 226 | Engine Air compressor block sleeving,boring and honing. |
| 227 | Engine Air compressor crank grinding |
| 228 | Engine Air compressor crank oil seal portion welding & maching |
| 229 | Engine Cylinder Block crack welding & finishing (major & minor) |
| 230 | Cylinder block water jacket sleeve fitting& pressure testing (tikali with material) |
| 231 | Cylinder head water jacket sleeve fitting & pressure testing (tikali) |
| 232 | Cylinder head injector protectivesleeve removing fitting ‘O’ ring fitting |
| 233 | Engine Cylinder Liner removing & refiting finishEngine Cylinder liner atVehicle depot.Workshop |
| 234 | Engine Cylinder Block Welding Reparing |
