Tender For Repairs To Ei And Fans At Cls Hutbay, A And N Island.; 1 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required a) 4x4 Sqmm +2x4 Sqmm 2 Supplying and fixing15 watt LED panel luminaires surface type, 230V, 50Hz, including making all electrical connections with suitable size PVC insulated copper conductor wire etc. as required (M/s Havells or SS make) 3 Supplying and fixing36 watt LED panel luminaires recessed type, 230V, 50Hz, including making all electrical connections with suitable size PVC insulated copper conductor wire etc. as required (M/s Havells or SS make) 4 Supplyingof ceiling fan 1200 mm sweep, suitable for 230V, 50 HZ, ac supply and installation, testing and commissioning ofthe same includingdisconnecting all electrical connections and dismantling the existing fan, connectionsetc. as required (Make M/s Havells/Anchor or SS make) 5 Supplying and fixing LED lamp 9 watt lamp, 230 V etc. as required 6 Supplying and fixingLED type 4 ft light fitting of20 Watt, 230V, 50HZ,including making all electrical connections with suitable size PVC insulated copper conductor wire etc. as required (M/s Havells or SS make) 7 Supplying and fixing PVC batten/ angle holder, connection etc. as required 8 Pdg & fixing of 20 watt LED Street light luminaires with polycarbonate cover and driver in the existing brackets of pole, i/c connection, as reqd. 9 Supplying and fixing following accessories in the existing Modular enclosure including connections etc as required a) 10 A 1 way modular switch 10 b) 10 A modular Socket Outlet 11 Supplying & fixing of exhaust fan 300 mm sweep, with 900 rpm, 230V, 50Hz,including making openings on walls and properly fastening with fastners and GI strips , i/cmakingconnection, testing, commissioning, sealing the leaks for preventing entry of rain water, etc. as required. ( MakeHavells or SS) 12 Supplying and fixing 40 W LED type Post Top fitting on existing support along with all accessories, fixing, connections etc as required (M/s Crompton Greaves LPTO-40-CDL or ss make) 13 Supplying of PVC insulated and sheathed armoured 2 core 1.5 sq.mm copper conductor 1.1 KV grade cable and laying the same on surface or in recess as reqd.(BSNL approved make). 14 Supplying and making end termination with brass compression gland for PVC insulated and sheathed copper conductor cable of 1.1 KV grade of size 2 core 1.5 sq.mm as reqd. 15 S/F of 2.5 MFD capacitor for ceiling fan as reqd 16 Supplying and fixing emergency LED lamp 10 watt lamp, 230 V etc. as required 17 Removing the Glow sigh board from the wall by making proper scaffolding arrangements, opening the cover, cleaning of dirt and dust from the display board,replacing the rusted fastners, damaged wires, sealant, and refixing the same at the designated location as per the direction of EIC. 18 Replacement of faulty unserviceable pumpset with following capacity open well monobloc submersible pump motor set in the existing sump suitable for operation on 230 V, 50 Hz, 1 Ph AC supply along with associated starter unit and standard length of cable, including dismantling the existing pumpset, minor civil works etc as required (i) 1 HP, Single phase, pipe dimension 25x25 mm (suctionxdelivery), discharge 1.8 LPS, head in mtrs 21 m (M/s Kirloskar KOSi-135 or similar superior make)
