|
| 1 | Taking down chowkhats or frameswith shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Taking down chowkhats or frameswith shutters (without taking off shutters from the frames) of size exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Taking down shutters of any description, areaexc 1.00 sqm and n.exc 2.00 sqm each complete all as specified and as directed by Engineer-in-Charge. |
| 4 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ®Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 5 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed by Engineer-in-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 6 | S&F Second class hard wood, glazed and skelleton shutters 30mm thick, open rebated and prepared to receive glass, gauze, etcwithout sash bar, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauze etc, size of members including two caot of synthetic enemel paint 10 cm width or girthover a coat of red pink primer and staineless steelwire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as directedsupplied and fixed to chowkats complete all as specified and as directed by Engineer-in-Charge. |
| 7 | S&F to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer complete all as specified and as directed by Engineer-in-Charge. |
| 8 | Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete all as specified and as per the manufacturer. |
| 9 | S& F in repairs stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed withstainless steel wire staples complete all as specified and as directed by Engineer-in-Charge. |
| 10 | M&L for Preparation of Oldor previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying onecoats of Synthetic enamel paint (Ordinary tint) complete all as specified and as directed by Engineer-in-Charge. |
| 11 | S&F 100 mm long,Butt hinges, medium weight, cold rolled mild steel, complete all as specified and as directed by Engineer-in-Charge. |
| 12 | S&F 150 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 13 | S&F 150 mm long Mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed by Engineer-in-Charge. |
| 14 | S&F 250mm long Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 15 | S&F inof floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of cover plate 150 mm complete all as specified and as directed by Engineer-in-Charge. |
| 16 | Taking down old rusted and demaged steel window/vent incl. guard bar and grill where exist of size not exc 1.5 sqm each complete all as specified and as directed by Engineer-in-Charge. |
| 17 | S&F Anodised aluminium frame / for doors,windows, ventilators with one or morerebates including joining cleat for fixing etc. complete all as specified and as directed by Engineer-in-Charge. |
| 18 | S&F Anodised aluminium window andventilator shutters,/ sliding shutter ,fixed typewithout sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, wire mesh and grills etc. complete all as specified and as directed by Engineer-in-Charge. |
| 19 | S&F 4.8mm thick sheet glass, ordinary quality and glazing with oil putty/rubber gasket in square of any thicknessin each pane for metal frames complete all as specified and as directed by Engineer-in-Charge. |
| 20 | S&F Neoprene/ EPDM rubber gasket complete all as specified and as directed by Engineer-in-Charge. |
| 21 | S&F inSteel ventilators with top hung shutter including hinges, steel peg stay complete all as specified and as directed by Engineer-in-Charge. |
| 22 | M&L for Painting to new steel surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with red oxide zinc chrome primer (one coat) and finishingwith two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 23 | M&L for Painting to old steel surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces,one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 24 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone or concrete or bricks surrounds glazesd with putty complete all as specified and as directed by Engineer-in-Charge. |
| 25 | S&F Sheet glass 3mm thick, ordinary quality & glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and as directed by Engineer-in-Charge. Note - scaffolding and security arrangement will be of contractor. |
| 26 | S & F Figured glass, pin head type,4mm thick and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed by Engineer-in-Charge. |
| 27 | Taking down cement or cement lime plaster/ grit, terrazo finish of any description from brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc completeall as specified and as directed by Engineer-in-Charge. |
| 28 | M&L for Rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 finished even & smooth without using extra cement and applying two coat of Acrylicdistemper on wallshaving VOCcontentless than 50 gms/liter of required shadeand colourcompleteas per manufactures over a layer of wall care putty 3mm and primertwo or more coat on new work after preparation of newly plastered surfaces complete all as specified and as directed by Engineer-in-Charge. (Note: Contractor shall have no claim on if plaster is carried out in patches irrespective of any height ) |
| 29 | M&L for Rendering 15mm thick on fair faces of brick in cement mortar 1:4 finished even & fair without using extra cement with using liquid water proofing compound as per manufacturer instructionsand applying two coats of cement based paint, white or tinted over a coat of alkali resistant priming paint complete all as specified and as directed by Engineer-in-Charge.(Note :- Water proofing compound shall be measured and paid separately) |
| 30 | Supply only liquid integral water proofing compound ISI Marked complete all as specified and as directed by Engineer-in-Charge. |
| 31 | M&L for Preparation of old /untreated surfaces of wall including cornices, pillasters etc and applying two coats of cement based paint, white or tinted over a coat of alkali resistant priming paint complete all as specified and as directed by Engineer-in-Charge. |
| 32 | M&L for preparation of old surfacesof walls incl paillars etc. by mechanical equipment like electric wall sander and applying one coats of Acrylicdistemper VOCcontentless than 50 gms/liter of required shadeand colour using rollers over a coat of primer incl two coats/layer complete all as specified and as directed by Engineer-in-Charge. |
| 33 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above GL) complete all as specified and as directed by Engineer-in-Charge. |
| 34 | M&L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm gradedstone aggregate) in plinth protections/hardstanding, finished even and smooth w/o using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 35 | Demolition of Brickwork , built in cement mortar including all quoins, arches, pillars etc, complete all as specified and as directed by Engineer-in-Charge. |
| 36 | M&Lfor Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 37 | S&F anodized snap grid frame work of size 605mm x 605 mm for false ceiling including necessary notching. The snap grid shall consist of anodized aluminium main & cross tee of size 36.5 x 25 x 1.4 mm weighing 0.24 Kg/RM and 23.5 x 26.4 x 1.40 mm weighing 0.191 Kg/RM respectively. The main and cross tee shall be jointed at junction crossing with anodized aluminum angle bracket of size 15mm x 15mm x 1.5 mm weighing 0.12 Kg/RM fixed with suitable MS bolts, nuts and washer. The snap grid (main/cross tee section) shall besupported at ends all along the wall with anodized aluminum angle of size 35 x 25 x 2 mm weighing 0.36 Kg/RM fixed to wall with suitable arrangement and providing 12 mm thick mineral gypsemboard fixed in grid support with 2.50 mm dia plain mild steel wire galvanised class 3 fixed in detached works etc to support snap grid, made of aluminum including dismantling of old ceiling boards as per specification complete all as specified and as directed by Engineer-in-Charge. |
| 38 | S&F12 mm thick Gypsum board of any size for ceiling/walling all necessary fittings including dismantling of old ceiling boards complete all as specified and as directed by Engineer-in-Charge. |
| 39 | S&F in repair 600 mm x 450 mm bevelled edge mirror 5 mm thick of selected quality glass , mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed by Engineer-in-Charge. |
| 40 | Taking down or up, 15 mmboregalvanisedsteel tubing and connections including cleaning for refixing or removalcomplete all as specified and as directed by Engineer-in-Charge. |
| 41 | Refixing oldGI tubingwith all new fitting and fixedto walls & ceilings or laid in floors, bore of pipe 15 mmcomplete all as specified and as directed by Engineer-in-Charge. |
| 42 | S&F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mmcomplete all as specified and as directed by Engineer-in-Charge. |
| 43 | Taking down or up, 20 mmboregalvanisedsteel tubing and connections including cleaning for refixing or removal complete all as specified and as directed by Engineer-in-Charge. |
| 44 | Refixing oldGI tubingwith all new fitting and fixedto walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed by Engineer-in-Charge. |
| 45 | S&F GI tubing medium grade with all fitting and fixedto walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and as directed by Engineer-in-Charge. |
| 46 | S&F in repairs Vitreous china Squatting pan , \"Orissa pattern, size 580x440 mm white, with integral foot restexcluding flushing cistern and flush pipe including connection to trap, to flushing pipe, anti-syphonage pipe, etc complete including Floor trapmaking good to floor complete all as specified and as directed by Engineer-in-Charge. |
| 47 | Rotational moulded polyethylene water storage tanks of capacity2000 litres, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including dismantling of old water tank complete all as specified and as directed by Engineer-in-Charge.Notes :-(i) The water storage tanks shall be 2 layers,ISI Marked tanks moulded to seem-less perfection of rotational moulding process. The tanks shall be manufactured only from FDA approved special grade of polyethylene and shall be certified fit for potable water. (ii) The tanks shall be white coloured and ISI marked. Also refer paras 18.60 and 18.60 A of MES Schedule Part-I. (iii) Payment for inlet, outlet and over flow pipes shall be made separately. However cost of providing necessary GI fittings such as nipples with check nuts for inlet and outlet pipes, GI plug with check nut for over flow pipe and 30 cm long wash out pipe, GI 20mm nominal bore, medium grade and check nut for wash out pipes of size as per actual requirements and ball valve as directed by the Engineer-in-Charge shall be deemed to be included in the unit rate of this item. |
| 48 | M&L for Cleaning of Rotational Moulded plyethyelene water storage tank of capacity 500 ltrs upto 2000 litrecomplete all as specified and as directed by Engineer-in-Charge. |
| 49 | Supply and fixin replacementPVC Copper conductor cable 2.5 Sqmm x 02 core forsuitable service coonection complete all as specified and as directed by Engineer-in-Charge. |
| 50 | Supply and fix in replacementPVC Copper conductor cable 4.0 Sqmm x 03 core forsuitable service coonection complete all as specified and as directed by Engineer-in-Charge. |
| 51 | Supply and fix in replacementRigid non-metallic PVC conduit of size20/25 mm dia ( as per site requirement) inclusive of all tees, bends,elbows,juction box,reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. all as specified and as directed by Engineer-in-Charge. |
| 52 | Supply and fix in replacement PVC casing caping 20X12 mm( as per site requirement) inclusive of all tees, bends,elbows and fixing accessories such as couplers, lock nails,etc. all as specified and as directed by Engineer-in-Charge. |
| 53 | Supply and fixin replacement PVC casing caping25X16 mm( as per site requirement) inclusive of all tees, bends,elbows and fixing accessories such as couplers, lock nails,etc. all as specified and as directed by Engineer-in-Charge. |
| 54 | Supply and fix in replacement PVC casing caping 30X15 mm( as per site requirement) inclusive of all tees, bends,elbows and fixing accessories such as couplers, lock nails,etc. all as specified and as directed by Engineer-in-Charge. |
| 55 | Supply and fix in replacement PVC casing caping 38X20 mm( as per site requirement) inclusive of all tees, bends,elbows and fixing accessories such as couplers, lock nails,etc. all as specified and as directed by Engineer-in-Charge. |
| 56 | Supplyand fix in replacement PVC casing caping50X20mm( as per site requirement) inclusive of all tees, bends,elbows and fixing accessories such as couplers, lock nails,etc. all as specified and as directed by Engineer-in-Charge. |
| 57 | Supplyand fix in replacement PVC box/ wooden box with sunken box of anysize and make as per site requirement \" includng3 mm thick newbakelite laminated sheet top cover ‘Hylam’ suitable for one switch and socket of capacity 5/15Amps all as specified and as directed by Engineer-in-Charge. |
| 58 | Supplyand fixin replacementPVC flexible pipe of size upto 40 mm dia ( as per site requirement) including PVC clamp etc. complete all as specified and as directed by Engineer-in- Charge. |
| 59 | Supplyand fixin replacementSwitch socket combination 2 in 1,6 A flush type complete all as specified and as directed by Engineer-in- Charge. |
| 60 | Supplyin and fix replacementSwitch socket combination 5 in 1, 6/16 Amp flush type universal complete all as specified and as directed by Engineer-in- Charge. |
| 61 | Supplyand Fixing in replacement MCB single pole, 240 volts of rating 6-32 Amps of C curvebreaking capacity of 10 KA complete all as specified and as directed by Engineer-in-Charge. |
| 62 | Supply and Fixing in replacementMCB suitable for 6 to 32 Amps, 240 Volt AC supply C Curve single pole and neutral(SPN) with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed by Engineer-in-Charge. |
| 63 | Supplyand fixingmultistranded copper conductor of size 1.5 Sqmm single core complete all as specified and as directed by eng-in-charge. |
| 64 | Supplyand fixingmultistranded copper conductor of size 2.5 Sqmm single corecomplete all as specified and as directed by eng-in-charge. |
| 65 | Supply and fixingmultistranded copper conductor of size 4 Sqmm single core complete all as specified and as directed by eng-in-charge. |
| 66 | Supply and fixing in replacement PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and as directed by eng-in-charge. |
| 67 | Supply and fixing in replacement PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 mm x 100 mm and 50 mm deep complete all as specified and as directed by eng-in-charge. |
| 68 | Supply and fixing in replacement PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 200 mm x 150 mm and 50 mm deep complete all as specified and as directed by eng-in-charge. |
| 69 | Supply and fixing in replacement PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 250 mm x 200 mm and 50 mm deep complete all as specified and as directed by eng-in-charge. |
| 70 | Supply and fixing in replacement PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 350 mm x 300 mm and 50 mm deep complete all as specified and as directed by eng-in-charge. |
| 71 | Supply & fix in replacement plastic laminated top sheet cover 3 mm thick of size 5\"x5\" all as required at site including Cutting/drilling holes and fixing screws/Switches/socketes etcas per existing complete all as specified and as directed by eng-in-charge. |
| 72 | Supply & fix in replacement plastic laminated top sheet cover 3 mm thick of size 8\"x5\" all as required at site including Cutting/drilling holes and fixing screws/Switches/socketes etc as per existing complete all as specified and as directed by eng-in-charge. |
| 73 | Supply & fix in replacement plastic laminated top sheet cover 3 mm thick of size 11\"x9\" all as required at including Cutting/drilling holes for fixing of screws/Switches/socketes etc complete and providing 4 Nos screws with washers for fixing the sheet to sunken box /PVC box complete all as specified and as directed by eng-in-charge. |
| 74 | Supply & fix in replacement plastic laminated top sheet cover 3 mm thick of size 13\"x11\" all as required at site including Cutting/drilling holes for fixing of screws/Switches/socketes etc complete and providing 4 Nos screws with washers for fixing the sheet to sunken box /PVC box complete all as specified and as directed by eng-in-charge. |
| 75 | M&L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by mean of GI wire 4 mm dia by means of bolts, nuts check nuts and washers of GI or steel and connecting tomain switch board, testing on completion includingGI pipe 20 mm dia light grade for watering and bringing the same upto 30 cm above normal ground level with plug at top including pipe fittings etc complete and GI pipe 15 mm dia light grade for the protection of GI wire from earth pit to earth point complete including necessary excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance n.exc 50 m all as specified as shown in electrical plate No 3 SSR Part-I complete all as specified and as directed by eng-in-charge. |
| 76 | M&L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by mean of GI strip 25mm x 4 mm by means of bolts, nuts check nuts and washers of GI or steel and connecting tomain switch board, testing on completion includingGI pipe 20 mm dia light grade for watering and bringing the same upto 30 cm above normal ground level with plug at top including pipe fittings etc complete and GI pipe 40 mm dia light grade for the protection of GI strip from earth pit to earth point complete including necessary excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance n.exc 50 m all as specified as shown in electrical plate No 3 SSR Part-I complete all as specified and as directed by eng-in-charge. |
| 77 | Taking down any size and any capacity Exhaust fan, ceiing fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed by Engineer-in-Charge. |
| 78 | Refixing of exhaust fan, taking down vide item ser No-77 and connecting up with 3 core of flexible cable of size 1.5 sqmm after complete rewinding ,over hauling, minor repair as required and to make it serviceable with replacement of bearing/ capacitor etc. complete all as specifiedand as directed by Engr-in-charge. |
| 79 | Refixing of Ceiling fan, taking down vide item ser No 77 and connecting up with 3 core of flexible cable of size 1.5 sqmm after complete rewinding ,over hauling, minor repair as required and to make it serviceable with replacement of bearing/ capacitor etc. complete all as specifiedand as directed by Engr-in-charge. |
| 80 | Taking down carefully Geyser 25 Ltr Cap from wall after unscrewing nuts/bolts, incoming outgoing water pipes, elect connections etc for carry out necessary repair work and repacement of parts like thermal cutout/safetycutoff,anode rod,insulation layer,PRV,drain valve,indicator light ete as per site requirement and cleaning of gyeser by removing of calicium carbonate and refixing to its original position and making reconnections and testing complete all as specified and as directed (spare parts shall be measured and paid under respective items. |
| 81 | Supply and fixing in replacement heating element any type 1.5/2 KW 240 Volts,ISI marked for water heater storage type complete all as specifiedand as directed by Engr-in-charge. |
| 82 | Supply and fixing in replacement thermostat switch 0 to 100°C , 240 volts suitable for water heater storage type any existing make/suitable size complete all as specifiedand as directed by Engr-in-charge. |
| 83 | Supply and fix in replacement syphon assy any type for water heater storeage type 25 ltr cap complete all as specifiedand as directed by Engr-in-charge. |
| 84 | Supply and fixingin replacement inner tank made of copper/stainless steel for water heater storeage type25 ltr cap complete all as specifiedand as directed by Engr-in-charge. |
| 85 | Supply and fixing in Replacement inlet and outlet PVC connection 15 mm size with PTM nuts of length 450 mm (Hot & Cold) complete all as specifiedand as directed by Engr-in-charge. |
| 86 | Supply, install, test and commissioning of factory made floor mounted LT cubical panel confrming to CPRI specification board out type (double door) made out of 3.15mm thick CRCA sheet totally enclosed with necessary ventilations, weather, dust and vermin proof IP-53 minium with front and rear opening and locking arrangement 415Volts, 3 phase, 50 Hz having aluminium bus bar of capacity 110Amps and of suatable size to house all LT switch gears and accusories as mentianed below and full neutral duly colour coded and for neutral supported with DMC/SMC insulators colour codedcomplete connection from bus bar to MCCB with suitable copper cable, panel board shall be grouted in the ground with suitable size of foundation in PCC 1:2:4 type B1, MS channels for base frame 50x50x6 mm and supports, GI nut, bolts, washers etc.The panel board shall be powder coated and red oxided primed :- (a)The following items are provided in one compartment :-(i)Digital Voltmeter - 01 No, (ii)Digital Ameter - 01 No (iii)Three Indication LED LampIncomming - (i) MCCB 4P, 63AMP, 25 KA -01 No Out going :-(i)RCCB with MCB of 2 pole , 40 Amp -06 Nos |
