|
| 1 | Loading Carriage and unloading of PCC/ ST Poole from ESC store Unnao/Sub Station Store/ other site to site work as per required and vice versa. |
| 2 | Carriage all type Loose line material from ESC store Unnao/Sub Station Store/ other site to site work as per required and vice versa. |
| 3 | Dismantling of old damaged pole/ Double Pole and X-arms, brackets, Insulators, Channels and all hardware fittings. |
| 4 | Erection of new PCC/ST Pole fitting of X-Arms, brackets insulators and other hardware fittings. |
| 5 | Erection of double pole structure including digging of pit and fitting of all sccessories complete |
| 6 | Placement of 11/0.4 33 KV Transformer on Double pole and Installation and commissioning of 25/63/100 KVA transformer including dressing damaged cable, lugs, jumping & connecting Earthing of body & neutral as per required. |
| 7 | Dismantling re-usable Old Pole from site to site and their erection and fitting of X-Arms, brackets insulators and other hardware fittings etc. |
| 8 | Dismantling/ Laying / Repairing of Aerial Bunched Cable from L.T.O/H line (to be replaced/damaged) |
| 9 | Digging of cable trench approx. 1200x1200 mm by JCB/kachha road/Pakka Road for suitable size for damaged cable joints/new cable lying |
| 10 | Opening and reconnection of consumer connections for shifting or replacement of pole. |
| 11 | Re-sagging of conductor, on old line after erection/repair of pole, binding of conductor etc. |
| 12 | Opening of H.T. / LT Jumpers/ Re-Jumpering from the exiting H.T.O.H./ L.T. O.H. line for erection work. |
| 13 | Supply and Fixing Holding clamps for PCC/STP with Nuts & Bolts. |
| 14 | Supply and Fixing Stay clamps for PCC/STP with Nuts & Bolts. |
| 15 | Supply and Fixing F Clamps clamp for PCC/STP with Nuts & Bolts. |
| 16 | Excavation of foundation and taken out the damaged pole/pole to be shifted from the ground. Repairing of rotted bottom of STP by welding MS sheet /3 nos, MS angles of size 45X45X6 MM 750 MM long as per site condition. |
| 17 | Grouting of pole with cement brick ballast and coarse sand as per standard specifications. |
| 18 | Fabrication/ Modifications of MS Items/Nuts & Bolts as per requirement of site conditions. |
| 19 | Fixing of Stay Rod and its erection and grouting by fitting of stay clamp. Stay wire and its proper binding and tightening etc. |
| 20 | Repositioning of tilted PCC/ST pole. |
| 21 | Chopping of tree branches lying in the route of exiting line touching the tree branches to the phase line conductor as per requirement of site. |
