Tender For Supply And Installation Of Necessary Materials For Repair Of Musical Fountain With Supply And Laying Of Cable At Municipal Park In Ward No.- 20 Under Raiganj Municipality. - Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc inci. S & F 3 nos. DIN type HRC fuse as per rating. 200 Amp Make L&T [Page D-3, It.-4 (a)] Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 100 Amp Make L&T [Page D-3, It.-4 (a)] Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required(As per Drawing no. 470 of PWD Specification Book-May 1991) Dimension of Al. Bars [85mm long) 4 x 50x10mm mm Dimension of Sheet Metal Box-500x150mm 415 V, 315 A [Page D-12, It.-19(b)) Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required(As per Drawing no. 470 of PWD Specification BookMay 1991) Dimension of Al. Bars [85mm long) 4 x 40x5mm mm Dimension of Sheet Metal Box 100/125 A 500x150mm 415 V, [Page D-12, It.-19(b)) Supply & delivery of 415 V, 50 Hz,3 Ph.AC Fully Automatic Star Delta Starter of Continuous duty in sheet steel enclosure of the following capacity (make:L&T/ABB/SCHNEIDER): a) 12.5 HP (with Relay of Max Range in Amp 9-14) [UD & MA Schedule Page-15 item 14(a)] Supply & fixing R.G.B Light SPEC-12 V, 12 LED 36Watt including necessary fittings brands approved by EIC. [Annalysed Rate] Supplying and Drawing 1.1 KV single core stranded FR PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelald Gi fish wire and making necy, connection as required 3 x 36/0.3 (2.5 sqmm) [Page E-9, It.-1(e)] 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC. [Page E-9, It.-1(5)] Item Description 3x36/0.3 (2.5 sqmm) + 2x22/0.3 (1.5 sqmm) as ECC [Page E-9, It.-1(t)) Supplying & fixing medium gauge GI Pipe (ISI-Medium) Protection with necessary fittings and jointing metarials as required ISI-M. 180 mm dia. (Page F-6, It.-11(f)) Supplying & fixing medium gauge Gt Pipe (ISI-Medium) Protection with necessary fittings and jointing metarials as required ISI-M. 150 mm dia. [Page F-6, It.-11(d)] 150 Supply & delivery at site 4 core 35 sq.mm armoured Aluminium conductor cable (GLOSTER/HAVELLS) for submain wiring from Main to BAS Bar. UD & MA schedule Page 11,G-1] Supply & delivery at site 4 core 25 sq.mm armoured Aluminium conductor cable (GLOSTER/HAVELLS) for submain wiring from Main to BAS Bar. [UD & MA schedule Page 11,F-1] Supply & delivery at site 4 core 16 sq.mm armoured Aluminium conductor cable (GLOSTER/HAVELLS) from Main to Bus Bar. [UD & MA schedule Page 11,D-3] Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. (Page F-2, 1 (a)) Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy, mending good damages and painting [Page F-1, 2 (b)] Laying of cable from 3/3% core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes letc. as necy., mending good damages and painting [Page F-1, 2 (c)) Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below: 4 Core 25 sq.mm. [Page F-4, 7 (c)) Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials: 4 Core 25 sq.mm. (Page F-5, 8 (b)(xiii)] 50 Earthing with 50 mm dia Gl pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long Gi boits, double nuts, double washers incl. 5 & F 15 mm dia Gl pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA-Medium Gl pipe [Page G-1, 2 (a)]
