|
| 1 | Supply of following configuration415V, 3-phase, 4 wire, double door,with R Y B Phase indication and mcb position indication through glass front, IP-54,Prewired with HFFR copper wires, horizontal type, metallic Double Door, Phase Segregated three pole and neutral MCB Distribution Board fabricated out of 2 mm thick ,powder coated with RAL7035 shade , pre-galvanised G.I. sheet steel, suitable for surface mounting/ installation in existing enclosure complete with appropriate rating of tinned copper bus bar/ Cu wire, neutral bus bar, earth bar, din bar,brass neutral link, brass earthing studs, phase distribution drawing, danger board, name plate, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes , neoprene gasket, etc as as per drawing, specifications & generally as per relevant IS & as per instructions of Engineer-in-charge. |
| 2 | 14 way having 1 no. main incomer of 25A TPN MCB, Isc=10kA, Type C with 1 no. of25A, Isc=10kA, DP RCBO (100mA) as incomer for each phase and 42 nos. outgoing of 6A SPN MCB suitable for 240V rating, Type \"C\" curve, 10 kA breaking capacity and as per tender technical specifications. |
| 3 | 8 way having 1 no. main incomer of 40A TPN MCB, Isc=10kA, Type C with 1 no. of40A, Isc=10kA, DP RCBO (100mA) as incomer for each phase and 24 nos. outgoing of 16A SPN MCB suitable for 240V rating, Type \"C\" curve, 10 kA breaking capacity and as per tender technical specifications. |
| 4 | 8 way having 1 no. main incomer of 25A TPN MCB, Isc=10kA, Type C with 1 no. of25A, Isc=10kA, DP RCBO (100mA) as incomer for each phase and 24 nos. outgoing of 16A SPN MCB suitable for 240V rating, Type \"C\" curve, 10 kA breaking capacity and as per tender technical specifications. |
| 5 | 8 way having 1 no. main incomer of 16A TPN MCB, Isc=10kA, Type C with 1 no. of16A, Isc=10kA, DP RCBO (100mA) as incomer for each phase and 24 nos. outgoing of 6A SPN MCB suitable for 240V rating, Type \"C\" curve, 10 kA breaking capacity and as per tender technical specifications. |
| 6 | 6 way having 1 no. main incomer of 25A TPN MCB, Isc=10kA, Type C with 1 no. 25A, Isc=10kA, DP RCBO (100mA) as incomer for each phase and 18 nos. outgoing of 16A SPN MCB. suitable for 240V rating, Type \"C\" curve, 10 kA breaking capacity and as per tender technical specifications. |
| 7 | Installation, Testing and Commissioning of following configuration415V, 3-phase, 4 wire, double door,with R Y B Phase indication and mcb position indication through glass front, IP-54,Prewired with HFFR copper wires, horizontal type, metallic Double Door, Phase Segregated three pole and neutral MCB Distribution Board fabricated out of 2 mm thick ,powder coated with RAL7035 shade , pre-galvanised G.I. sheet steel, suitable for surface mounting/ installation in existing enclosure complete with appropriate rating of tinned copper bus bar/ Cu wire, neutral bus bar, earth bar, din bar,brass neutral link, brass earthing studs, phase distribution drawing, danger board, name plate, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes , neoprene gasket, etc as as per drawing, specifications & generally as per relevant IS & as per instructions of Engineer-in-charge. |
| 8 | 14 way having 1 no. main incomer of 25A TPN MCB, Isc=10kA, Type C with 1 no. of25A, Isc=10kA, DP RCBO (100mA) as incomer for each phase and 42 nos. outgoing of 6A SPN MCB suitable for 240V rating, Type \"C\" curve, 10 kA breaking capacity and as per tender technical specifications. |
| 9 | 8 way having 1 no. main incomer of 40A TPN MCB, Isc=10kA, Type C with 1 no. of40A, Isc=10kA, DP RCBO (100mA) as incomer for each phase and 24 nos. outgoing of 16A SPN MCB suitable for 240V rating, Type \"C\" curve, 10 kA breaking capacity and as per tender technical specifications. |
| 10 | 8 way having 1 no. main incomer of 25A TPN MCB, Isc=10kA, Type C with 1 no. of25A, Isc=10kA, DP RCBO (100mA) as incomer for each phase and 24 nos. outgoing of 16A SPN MCB suitable for 240V rating, Type \"C\" curve, 10 kA breaking capacity and as per tender technical specifications. |
| 11 | 8 way having 1 no. main incomer of 16A TPN MCB, Isc=10kA, Type C with 1 no. of16A, Isc=10kA, DP RCBO (100mA) as incomer for each phase and 24 nos. outgoing of 6A SPN MCB suitable for 240V rating, Type \"C\" curve, 10 kA breaking capacity and as per tender technical specifications. |
| 12 | 6 way having 1 no. main incomer of 25A TPN MCB, Isc=10kA, Type C with 1 no. 25A, Isc=10kA, DP RCBO (100mA) as incomer for each phase and 18 nos. outgoing of 16A SPN MCB. suitable for 240V rating, Type \"C\" curve, 10 kA breaking capacity and as per tender technical specifications. |
| 13 | Supply of following configuration240V, 1-phase, 2 wire, double door,with Phase indication and mcb position indication through glass front, IP-54,Prewired with HFFR copper wires, horizontal type, metallic Double Door, MCB Distribution Board fabricated out of 2 mm thick ,powder coated with RAL7035 shade , pre-galvanised G.I. sheet steel, suitable for surface mounting/ installation in existing enclosure complete with appropriate rating of tinned copper bus bar/ Cu wire, neutral bus bar, earth bar, din bar,brass neutral link, brass earthing studs, phase distribution drawing, danger board, name plate, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes , neoprene gasket, check nuts etc as required as per drawing, specifications & generally as per relevant IS & as per instructions of Engineer-in-charge. |
| 14 | MCB DB with Incomer of 16A, Isc=10kA, Type C, DP MCB and 8 nos. of 6A, Isc=10kA, Type C, SPN Outgoing MCB feeder as per SLD and technical specification. |
| 15 | MCB DB with Incomer of 25A, Isc=10kA, Type C, DP MCB and 4 nos. of 16A, Isc=10kA, Type C, SPN Outgoing MCB feeder as per SLD and technical specification. |
| 16 | Installation, Testing and Commissioning of following configuration240V, 1-phase, 2 wire, double door,with Phase indication and mcb position indication through glass front, IP-54,Prewired with HFFR copper wires, horizontal type, metallic Double Door, MCB Distribution Board fabricated out of 2 mm thick ,powder coated with RAL7035 shade , pre-galvanised G.I. sheet steel, suitable for surface mounting/ installation in existing enclosure complete with appropriate rating of tinned copper bus bar/ Cu wire, neutral bus bar, earth bar, din bar,brass neutral link, brass earthing studs, phase distribution drawing, danger board, name plate, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes , neoprene gasket, check nuts etc as required as as per drawing, specifications & generally as per relevant IS & as per instructions of Engineer-in-charge. |
| 17 | MCB DB with Incomer of 16A, Isc=10kA, Type C, DP MCB and 8 nos. of 6A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification. |
| 18 | MCB DB with Incomer of 25A, Isc=10kA, Type C, DP MCB and 4 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification. |
| 19 | Supply of following LED light fittings complete with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, suitable PVC terminal box as per tender specification. |
| 20 | 4ft Functional Batten (approx dim.140mm x 105mm x 1219mm)with 2x18W LED Tube (acid & corrossion proof) with a nominal system lumen output of 4320 lumens and a minimum system efficacy not less than 120lm/W.The luminaire should have a color temperature of 6500K and CRI>80. The luminaire shall meet IP65 rating with THD < 10% and PF > 0.95. The luminaire housing should made of • Body - glass reinforced polyester (GRP), RAL 7035 • Gasket - polyurethane • Diffuser - UV stabilised prismatic acrylic material. The total power consumption should not exceed 38W(including BIS Compliant integrated driver) and other requirements shall be as per tender technical specifications. |
| 21 | Industrial box type (approx dim.130mm x 95mm x 1219mm), surface mounted 4ft fixture along with two nos. of 18W, 2340 lm,minimum 130 lm/w system efficacy, CCT 6500K and CRI>80, THD<10%, PF>0.95, 4ftLED tube. The luminaire shall meet IP20 rating. The fixture shall have single piece construction made of white powder coated CRCA sheet steel suitable for above LED tube light. The LED shall be mounted on extruded aluminium box which acts as heat sink with extruded poly carbonate material which gives diffused light. The total power consumption should not exceed 38W (including BIS Compliant integrated driver) and other requirements shall be as per tender technical specifications. |
| 22 | LED 4ft Batten (approx dim. 75mm x 95mm x 1219mm) with a nominal system lumen output of 2500 lumens and a minimum system efficacy of 130 lm/W.The luminaire should have a CCT of 6500K and CRI>80. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The luminaire housing should made of Extruded Aluminium with extruded PC diffuser. The total power consumption should not exceed 20W (including BIS Compliant integrated driver) and other requirements shall be as per tender technical specifications. |
| 23 | LED peripheral luminaire with a nominal system lumen output of 4200 lumens and a minimum system efficacy of not less than 120 lumen/watt. The luminaire should have CCT of 5700K and a CRI>70. The luminaire shall meet IP66, IK 07 rating with THD<10% & Pf>0.9. The luminaire housing should be made of pressure die cast aluminium. The total power consumption should not exceed 35W (including BIS Compliant integrated driver) and other requirements shall be as per tender technical specifications. |
| 24 | LED Downlighter with a nominal system lumen output of 2400 lumens and a minimum system efficacy of 130 lm/W. The luminaire should have a CCT of 5700K and CRI > 80. The luminaire shall meet IP20 rating and IK06 rating, Lifetime (L70/B50): 50,000 h (at 25 °C), with THD < 10% and PF > 0.9. The luminaire housing should made of High pressure die cast Aluminium with high quality Polycarbonate diffuser. The total power consumption should not exceed 19W (including BIS Compliant integrated driver). Approx dimensions of downlighter shall be 250 dia and 125 height in mm and other parameters as per tender technical specifications. |
| 25 | LED Bulkhead with a nominal system lumen output of 700 lumens and a minimum system efficacy of 105 lm/W. The luminaire should have a CCT of 6500K and CRI > 70. The luminaire shall meet IP65 rating and IK 08 rating with THD < 20% and PF > 0.9. The luminaire housing should made of High pressure die cast Aluminium with high quality PMMA diffuser. The total power consumption should not exceed 6.5W (including BIS Compliant integrated driver) and other requirements shall be as per tender technical specifications. |
| 26 | Installation, Testing and Commissioning of following LED light fittings complete with light fitting accessories, fixing of light fittings using SS accessories, PVC conduit bushes, Cu cable lugs as per tender specifiction. |
| 27 | 4ft Functional Batten (approx dim.140mm x 105mm x 1219mm)with 2x18W LED Tube (acid & corrossion proof) with a nominal system lumen output of 4320 lumens and a minimum system efficacy not less than 120lm/W.The luminaire should have a color temperature of 6500K and CRI>80. The luminaire shall meet IP65 rating with THD < 10% and PF > 0.95. The luminaire housing should made of • Body - glass reinforced polyester (GRP), RAL 7035 • Gasket - polyurethane • Diffuser - UV stabilised prismatic acrylic material. The total power consumption should not exceed 38W(including BIS Compliant integrated driver) and other requirements shall be as per tender technical specifications. |
| 28 | Industrial box type (approx dim.130mm x 95mm x 1219mm), surface mounted 4ft fixture along with two nos. of 18W, 2340 lm,minimum 130 lm/w system efficacy, CCT 6500K and CRI>80, THD<10%, PF>0.95, 4ftLED tube. The luminaire shall meet IP20 rating. The fixture shall have single piece construction made of white powder coated CRCA sheet steel suitable for above LED tube light. The LED shall be mounted on extruded aluminium box which acts as heat sink with extruded poly carbonate material which gives diffused light. The total power consumption should not exceed 38W (including BIS Compliant integrated driver) and other requirements shall be as per tender technical specifications. |
| 29 | LED 4ft Batten (approx dim. 75mm x 95mm x 1219mm) with a nominal system lumen output of 2500 lumens and a minimum system efficacy of 130 lm/W.The luminaire should have a CCT of 6500K and CRI>80. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The luminaire housing should made of Extruded Aluminium with extruded PC diffuser. The total power consumption should not exceed 20W (including BIS Compliant integrated driver) and other requirements shall be as per tender technical specifications. |
| 30 | LED peripheral luminaire with a nominal system lumen output of 4200 lumens and a minimum system efficacy of not less than 120 lumen/watt. The luminaire should have CCT of 5700K and a CRI>70. The luminaire shall meet IP66, IK 07 rating with THD<10% & Pf>0.9. The luminaire housing should be made of pressure die cast aluminium. The total power consumption should not exceed 35W (including BIS Compliant integrated driver) and other requirements shall be as per tender technical specifications. |
| 31 | LED Downlighter with a nominal system lumen output of 2400 lumens and a minimum system efficacy of 130 lm/W. The luminaire should have a CCT of 5700K and CRI > 80. The luminaire shall meet IP20 rating and IK06 rating, Lifetime (L70/B50): 50,000 h (at 25 °C), with THD < 10% and PF > 0.9. The luminaire housing should made of High pressure die cast Aluminium with high quality Polycarbonate diffuser. The total power consumption should not exceed 19W (including BIS Compliant integrated driver). Approx dimensions of downlighter shall be 250 dia and 125 height in mm and other parameters as per tender technical specifications. |
| 32 | LED Bulkhead with a nominal system lumen output of 700 lumens and a minimum system efficacy of 105 lm/W. The luminaire should have a CCT of 6500K and CRI > 70. The luminaire shall meet IP65 rating and IK 08 rating with THD < 20% and PF > 0.9. The luminaire housing should made of High pressure die cast Aluminium with high quality PMMA diffuser. The total power consumption should not exceed 6.5W (including BIS Compliant integrated driver) and other requirements shall be as per tender technical specifications. |
| 33 | Supply of the following Industrial MCB and metal clad plug sockets with suitable industrial plug tops (3-pin) alongwith pre-Galvanized powder coated GI sheet steel box suitable for surface mounting, suitable DIN-rail, face plate, suitable copper lugs, with chained metal cover for the socket outlet, complete with connections, SS screw/nut bolts for surface mounting including all accessories and mounting arrangement for completing installation. |
| 34 | 1 nos. of 6/10A and 1 nos. of 16A/20A, Single phase Industrial Socket with Isc=10kA, Type C-Curve, Industrial type MCB for each Socket in pre- Galvanised powder coated 2mm thick GI sheet steel Box, suitable for surface mounting, Industrial plug tops with chained metal cover for the socket outlet, suitable din-rail, face plate, suitable copper lugs, plug-tops, SS screw/nut bolts for surface mounting. |
| 35 | 1 nos. of 6/ 10A, Single phase Industrial Socket with Isc=10kA, Type C-Curve, Industrial type MCB for each Socket in pre- Galvanised powder coated 2mm thick GI sheet steel Box, suitable for surface mounting, Industrial plug tops with chained metal cover for the socket outlet, suitable din-rail, face plate, suitable copper lugs, plug-tops, SS screw/nut bolts for surface mounting. |
| 36 | 2 nos. of 6/10A , Single phase Industrial Socket with Isc=10kA, Type C-Curve, Industrial type MCB for each Socket in pre- Galvanised powder coated 2mm thick GI sheet steel Box, suitable for surface mounting, Industrial plug tops with chained metal cover for the socket outlet, suitable din-rail, face plate, suitable copper lugs, plug-tops, SS screw/nut bolts for surface mounting. |
| 37 | 1 nos. of 6/ 10A, Single phase Industrial Socket in pre- Galvanised powder coated 2mm thick GI sheet steel Box, suitable for surface mounting, Industrial plug tops with chained metal cover for the socket outlet, suitable din-rail, face plate, suitable copper lugs, plug-tops, SS screw/nut bolts for surface mounting. |
| 38 | Installation, Testing and Commissioning ofthe following Industrial MCB and metal clad plug sockets with suitable industrial plug tops (3-pin) alongwith pre-Galvanized powder coated GI sheet steel box suitable for surface mounting, suitable DIN-rail, face plate, suitable copper lugs, with chained metal cover for the socket outlet, complete with connections, SS screw/nut bolts for surface mounting including all accessories and mounting arrangement for completing installation. |
| 39 | 1 nos. of 6/10A and 1 nos. of 16A/20A, Single phase Industrial Socket with Isc=10kA, Type C-Curve, Industrial type MCB for each Socket in pre- Galvanised powder coated 2mm thick GI sheet steel Box, suitable for surface mounting, Industrial plug tops with chained metal cover for the socket outlet, suitable din-rail, face plate, suitable copper lugs, plug-tops, SS screw/nut bolts for surface mounting. |
| 40 | 1 nos. of 6/ 10A, Single phase Industrial Socket with Isc=10kA, Type C-Curve, Industrial type MCB for each Socket in pre- Galvanised powder coated 2mm thick GI sheet steel Box, suitable for surface mounting, Industrial plug tops with chained metal cover for the socket outlet, suitable din-rail, face plate, suitable copper lugs, plug-tops, SS screw/nut bolts for surface mounting. |
| 41 | 2 nos. of 6/10A , Single phase Industrial Socket with Isc=10kA, Type C-Curve, Industrial type MCB for each Socket in pre- Galvanised powder coated 2mm thick GI sheet steel Box, suitable for surface mounting, Industrial plug tops with chained metal cover for the socket outlet, suitable din-rail, face plate, suitable copper lugs, plug-tops, SS screw/nut bolts for surface mounting. |
| 42 | 1 nos. of 6/ 10A, Single phase Industrial Socket in pre- Galvanised powder coated 2mm thick GI sheet steel Box, suitable for surface mounting, Industrial plug tops with chained metal cover for the socket outlet, suitable din-rail, face plate, suitable copper lugs, plug-tops, SS screw/nut bolts for surface mounting. |
| 43 | 2 nos. of 16A, Single phase Modular Decorative Type three pin Socket with Polycarbonate box, accordingly rated Switches for each Socket and heavy duty polycarbonate Face Plate, plug tops, SS screws for surface mounting and suitable mounting arrangements as per technical specification. |
| 44 | Supply |
| 45 | Installation, Testing and Comissioning on concrete/ brick wall |
| 46 | Supply of the following Surface mounted switches with pre-galvanized powder coated GI Box, all accessories and mounting arrangement as per Technical specifications. |
| 47 | 2 nos. of 6A, Single Pole, Isc=10kA, Type C-Curve, MCB along with pre- Galvanised powder coated GI sheet steel box, suitable din-rail, face plate, suitable copper lugs, SS screw/nut bolts for surface mounting. |
| 48 | Installation and commissioning of the following Surface mounted switches with pre-galvanized powder coated GI Box, all accessories and mounting arrangement as per Technical specifications. |
| 49 | 2 nos. of 6A, Single Pole, Isc=10kA, Type C-Curve, MCB along with pre- Galvanised powder coated GI sheet steel box, suitable din-rail, face plate, suitable copper lugs, SS screw/nut bolts for surface mounting. |
| 50 | 2 nos. of 6A, Single Pole, Modular type Decorative Switch with Polycarbonate box, heavy duty polycarbonate face plate suitable for surface mounting provided with SS screws and mounting arrangement as technical specification |
| 51 | Supply |
| 52 | Installation, Testing and Comissioning on concrete/ brick wall |
| 53 | Supply of heavy duty Class-B Galvanised steel (G.I.) ERW conduit pipe of following sizes along with all accessories such as inspection bends, junction box, socket, check nut, etc. including making threads, removing burrs, connection of accessories, cleating with heavy duty GI spacer saddles or suit to site clamps on RCC wall, column, steel structural, etc., as required under the instruction of Engineer-in-incharge. SS screws shall be supplied for fixing of spacer saddles. Surface type junction box shall be provided. |
| 54 | 25 MM |
| 55 | 40 MM |
| 56 | Fixing by surface conduiting of heavy duty Class-B Galvanised steel (G.I.) ERW conduit pipe of following sizes along with all accessories such as inspection bends, junction box, socket, check nut, etc. including making threads, removing burrs, connection of accessories, cleating with heavy duty GI spacer saddles or suit to site clamps on RCC wall, column, steel structural, etc. as required under the instruction of Engineer-in-incharge. Spacer saddles shall be fixed using SS screws. Surface type junction box shall be provided. |
| 57 | 25 MM |
| 58 | 40 MM |
| 59 | Supply of following size flexible GI conduit pipe including cleating with heavy duty GI saddles or suit to site clamps on RCC wall, column, steel structure, SS screws etc. as required under the instruction of Engineer-in-charge and as per tender specification. |
| 60 | 25 MM |
| 61 | 50 MM |
| 62 | Installation of following size flexible GI conduit pipe including cleating with heavy duty GI saddles or suit to site clamps on RCC wall, column, steel structure, etc. as required under the instruction of Engineer-in-charge and fixing with SS screws and as per tender specification. |
| 63 | 25 MM |
| 64 | 50 MM |
| 65 | Supply and laying of 14 SWG tinned solid copper conductor throughout along the conduit including fixing with ties, brazing etc as required. |
| 66 | Supply |
| 67 | Installation |
| 68 | Supply of Single Core flexible HFFR wires (Copper) of size mentioned below in voltage grade 1100V as per the IS:3961- part V, IS 17048: 2018 (latest edition) and as per conductor class 2 of IS: 8130/1984 as per technical specification |
| 69 | 1.5 Sq.mm |
| 70 | 2.5 Sq.mm |
| 71 | Installation/drawing through concealed/ surface conduit and wiring and termination at both ends of Single Core HFFR wires (Copper) of size mentioned below in voltage grade 1100V as per the IS 17048: 2018, IS 732 as per conductor class 2 of IS:8130/1984 as per technical specification. |
| 72 | 1.5 Sq.mm |
| 73 | 2.5 Sq.mm |
| 74 | Supply and laying of 10 sq. mm tinned copper conductor, connection with earth pad at one end using Brass nut bolt and DBs at other end clamping, brazing etc. and as tender technical specifications. |
| 75 | Supply |
| 76 | Laying of conductor after chasing floor or wall and finishing the same. |
| 77 | Supply and installation of test link box for earth pit connection and interconnection of down conductor from lightning protection system to lightning earth pit and should consist of 2mm thick powder coated pre-galvanised G.I. weather proof sheet enclosure with cover, having2 parallel paths of 50 mm x 3mm copper strip link, teflon sealing after connection, earthing stud, suitable for connecting of 8 nos. of 95sqmm earthing conductors etc as required. |
| 78 | Supply |
| 79 | Installation of test link box on wall using Anchor Fastners and termination of earthing conductor using lugs |
| 80 | Supply and Installation of 25 mm X 3 mm thick copper strip including connection/ terminating with brass nut, brass bolt, spring, washer etc. as required. |
| 81 | Supply |
| 82 | Installation, Testing and connection |
| 83 | Supply and fixing vertical air termination made up of 20mm dia, 1 mtr long copper rod attached to 145 mm dia. Copper sphere having drilled and tapped holes for fixing 5 nos. of 390mm long spikes and square copper base plate of 150 mm length and 10 mm thickness as per technical specification and approved drawing. |
| 84 | Supply |
| 85 | Installation and Testing |
| 86 | Supply of tinned Cu Lugs , ring type, of following sizes as per attached technical specification |
| 87 | 95sqmm stranded bare tinned copper conductor |
| 88 | 10sqmm stranded bare tinned copper conductor |
| 89 | Supply of Busbar Insulator of size M8 x 40mm, MOC: Epoxy as per tender specification. |
| 90 | Installation of Busbar Insulator of size M8 x 40mm, MOC: Epoxy for fixing of downcomer conductor from lightening arrestor as per tender specification. |
| 91 | Supply, Installation and Commissioning ofCopper Earth Plate 600 mm x 600 mm x 3 mm thick of high grade quality including accessories and providing PCC enclosure with Chequered cover plate hot dip galvanised having lifting lug and locking arrangement and watering pipe of 2.7 metre length with charcoal / coke and salt as per IS 3043 standard, technical specification and drawing. |
| 92 | Supply, Installation and Commissioning of Copper Earthing rod with 25mm diameter and 3000mm long including accessories, and providing PCC enclosure with cover plate hot dip galvanised having lifting lug and locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as per IS 3043 standard, technicals specification and drawing |
| 93 | Supply and installation of 6.6KV termination kit suitable for 6.35/11KV, 3Cx400Sq.mm, XLPE insulated Aluminium conductor, armoured Power cable. |
| 94 | Supply of required material and making of straight exothermic braze joints of copper conductors (95 sqmm) as per technical specification. |
| 95 | Junction box/Cable pull box of size 100mm x 100mm x 50mm fabricated out of 2mm thick GI sheet, cable gland plate at the bottom, punched hole for conduit entry on all sides, suitable to terminate 2nos. of 3 core x 2.5 Sq.mm Cu conductor, 8 nos. of terminals, etc. as required. |
| 96 | Supply |
| 97 | Installation |
| 98 | Supply, Fabrication and Installation of Standard steel sections as per IS 2062 Grade BR for equipment supports, base frame for panels, wall frames and brackets for installation of lights/ equipments, earth pit cover plates, Anchor Fastners etc. Fabrication shall include drilling, entiling, welding wire brush cleaning, testing DPT etc., supply of all consumables like gas, approved welding rods, Zinc coating paint finish during installation as per EIC and tender tech spec. After fabrication two coats of epoxy based primer and two coats of finish paints shall be applied. |
| 99 | Supply and installation of GI anchor fastener of size M8x100 mm by drilling through concrete block as per site requirement for fixing plate EP\"s or other structure as per tender tech spec. |
| 100 | Supply |
| 101 | Installation |
| 102 | Ceiling Rose for PA Point as per tender specifications. |
| 103 | Supply |
| 104 | Installation |
| 105 | Two Modular PVC Box Including Face plate with 02Nos of RJ 11(4Pin) with Shutter Telephone Socket as per tender specifications. |
| 106 | Supply |
| 107 | Installation |
| 108 | 50+ 50 Pair Indoor Type TTB as per tender specifications. |
| 109 | Supply |
| 110 | Installation |
| 111 | 20 + 20 Pair Indoor Type TTB as per tender specifications. |
| 112 | Supply |
| 113 | Installation |
| 114 | 10 Terminal Junction Box For PA System as per tender specifications. |
| 115 | Supply |
| 116 | Installation |
| 117 | 2Pair 0.6mm copper conductor Telephone cable as per tender specifications. |
| 118 | Supply |
| 119 | Installation |
| 120 | Twisted Armoured cable 1pair X 1.5Sqmmas per tender specifications. |
| 121 | Supply |
| 122 | Installation |
| 123 | Supply, Fabrication and Installation of Pre-Galvanized Powder Coated dome shaped cover of 1.6mm sheet thickness, 1220mm long for LED Tube light fittings as per specifications and instructions of Engineer-in-charge. |
