Tender For Patch Repair And Road Repair Work (Annual Rate Contract) For Pwd Sub Division Raniwara
Tender Value
30 Lakhs
Estimated cost
Bid Submission
18 Jun 2025
0 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhinmal → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Patch Repair And Road Repair Work (Annual Rate Contract) For Pwd Sub Division Raniwara
BOQ
| Sl. No. | Item Description |
| 1 | Cutting of trees ,including cutting of trunks,branches and removal of stumps & roots ,refilling, compaction of back filling and stacking of serviceable material by manual means with all lifts as per MoRTH Specification Clause201. .Lead up to 100 M(i) Girth from 300 mm to 600 mm |
| 2 | Cutting of trees ,including cutting of trunks,branches and removal of stumps & roots ,refilling, compaction of back filling and stacking of serviceable material by manual means with all lifts as per MoRTH Specification Clause201..Lead up to 100 M . (ii) Girth from 600 mm to 900 mm |
| 3 | Cutting of trees ,including cutting of trunks,branches and removal of stumps & roots ,refilling, compaction of back filling and stacking of serviceable material by manual means with all lifts as per MoRTH Specification Clause201. .Lead up to 100 M (iii) Girth from 900 mm to 1800 mm |
| 4 | Clearing and grubbing road landincluding uprooting rank vegetation, grass, bushes, shrubs, saplingsand trees girth upto 300 mm, removal of stumps of trees cut earlierand disposal of unserviceable materials and stacking of serviceable material upto a lead of 1000m including removal and disposal of top organic soil not exceeding in 150 mm thickness as per MORTH specification clause 201 By mechanical Means .In area of thorny jungle |
| 5 | Restoration of rain cuts with soil, moorum, gravel or a mixture of these including all leads and lifts and cost of arrangement of land, clearing the loose soil, benching for 300 mm width, laying fresh material in layers not exceeding 250 mm and compacting with plate compactor or power rammer to restore the original alignment levels & slopes complete as per MORTH specification Clause 3002.B Mechanical Means |
| 6 | Construction of granular sub-base by providing well graded material, spreading in uniforml ayers with TractorMount Grader on prepared surface ,mixing by mix in place method with rotavatorat OMC, and compacting with smooth wheel roller to achieve the desired density,complete as per MoRTH Specification Clause 401. For Grading IIIMaterial |
| 7 | Carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete.Lead20 KM |
| 8 | Maintenance of gravel road including making up the loss of profile,rectifying corrugated surface,filling up of depressions, pot holes and erosion gullies by adding fresh material and compacting it with appropriate equipment or tostrip excess of material from the road surface as per drawings and MoRTH specification Clause 401 |
| 9 | Maintenance of WBM road including filling up of pot holes,ruts and rectifying corrugated surface, damaged edge sand ravelling as per MoRTH specification Clause 404 |
| 10 | Repair to pot hole sand removal of loose material, trimming of sides,cleaningof surface by providing tack coat,20mm thick pre-mix carpet and seal coat type B as per MoRTH specification Clause 3004.2 |
| 11 | Construction of un-reinforced, plain cement concrete pavement M30 (Grade),thickness as per design,over a prepared subbase,with 43/53 grade cement as per Clause 602.2.2,coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25mm,mixed in a in fully automatic Batching Plant and ransported to site in tansit mixer for having continous agitated mixer, manufactured as per approved mix design including pumping of n R.M.C.from transit mixer to site of laying,with all lead and lift including cost ofadmixtures in recommended portion as per IS9103 to accelerate /retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer incharge laid in approved fixed side form work (steel channel,laying and fixing of 125 micron thick polythene film,wedges,steel plates including levelling the formwork as per drawing) ,spreading the concrete with shovels,rakes, compacted using Fixed Form Paver and finished in continuous operation including provision of contraction and expansion,construction joints,applying debonding strips ,primer,sealant near approaches to bridge / culvert and construction joints,admixturesas approved,c uring of concrete slabs for14-daysusing water finishing to lines and grade as per drawing and MoRTH Specification Clause 602 including vaccum de watering process with all required equipments (Dowel Bars will be paid seprately). |
AI Tender Summary
Tender Timeline
Jun 13, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJun 18, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 19, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender