Tender for Supply of materials including annual electrical maintenance and repairsaa - LED Hyalogen 30 Watt only materialonly Supplying* LED Flood light fitting of 30-40W, including lamp, with PF > 0.95, class IP 65 and above class IP 65 and above housing of pressure die cast aluminum alloy and heat sink extruded aluminum complete per specification No FG-ODF/FLS-23 LED Light 5 Watt Supplying5W-7W, 230V integral type LED Lampsuitable for B-22/E-27 base.4 LED Light 10 WattSupplying 10-12W, 230V integral type LED Lampsuitable for B-22/E-27 base.5 LED Light 14 WattSupplying & erecting 14W, 230V integral type LED Lamp suitable for B-22/E-27 base.6 LED flood light 50 Watt Supplying LED Flood light fitting of 50W,including lamp, with PF > 0.95,class IP 65 and above class IP 65 and above housing of pressure die cast aluminum alloy and heat sink extruded aluminum complete per specification No FG-ODF/FLS-27 2x1.5 sq.mm FRLSH copperPVC insulated wire8 2x2.5 sq.mm F.R copper PVC insulated wire9 2x4 sq.mm F.R copper PVC insulated wire10 2x6 sq.mm F.R copper PVC insulated wire11 2x10 sq.mm F.R copper PVC insulated wire12 Supplying and erecting PVC insulated PVC round sheathed 1 sq.mm (32 no. x 0.20mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV13 SupplyingPVC insulated PVC round sheathed 2.5sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV14 SupplyingPVC insulated PVC round sheathed 4sq.mm (56 no. x 0.30 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV15 Service Wire 2.5 mm16 Service wire 4 mm17 Service wire 6 mm18 Modular Switch Board 18 Supplying PVC Surface modular switch box with double mounting plate for 16 / 18 module duly erected.19 Modular Switch Board 12Supplying PVC Surface modular switch box with double mounting plate for 12 modules duly erected.20 Modular Switch Board 6Supplying PVC Surface modular switch box with double mounting plate for 6 modules duly erected.21 Modular Switch Board 422 Sanmica boards 8x1023 Wooden Board 8x10 Lakhdipati24 Kg Bars 1 Inch25 Kg Bar 3 Inch26 Kg Bar 4 In27 PVC Pipe 20mm28 PVC Pipe 25mm29 PVC Ceiling Rose30 PVC pipe accessories(coubpling ,bend,T ETC)31 Steel saddle clamp32 wooden guji pocket/ballast33 3/4 inchx5 Ft earthing pipe34 GItar Nos. 6 to 1435 GI wire 18 no36 PVC Gujje pocket ballast37 flexible conduit hose 1 inch38 Supplying power strip with one switch 6A and 4 sockets each 6A, 230 V combination with surge and spike protection unit complete.39 Switch 6 amp SupplyingISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.40 Switch 16 ampSupplying ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete.41 socket 6 amp SupplyingISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.42 socket 16 amp Supplying ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.43 Supplying and erecting two pole metal clad changeover switch 240 V, 32 A erected on angle iron/GI frame and duly connected with suitable wire leads complete44 63amp mains Supplying pole metal clad switch and fuse 415V, 63A on angle iron / GI frame as per specification no. SW-SWR/MTP.45 100A Mains Supplyingtriple pole metal clad switch and fuse 415V, 100A on angle iron / GI frame as per specification no. SW-SWR/MTP.46 32 amp mains Supplying triple pole metal clad switch and fuse 415V, 32A on iron / GI frame as per specification no. SW-SWR/MTP.47 Supplying, marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB48 Supplying, SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB49 SupplyingSPMCB 40A to 63A C-series(for motor/power) in provided distribution board as per specification no. SW-SWR/MCB50 Supplying, SPMCB 40A to 63A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB51 Supplying, DPMCB 6 A to 32 A B-series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB52 Supplying, DPMCB 40A to 63A, Bseries (for lighting) in provided distribution board as per specification no. SW-SWR/MCB53 Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB54 Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB55 Supplying double pole isolator only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc. in provided distribution board complete56 Supplyingtriple pole isolators only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc. in provideddistribution board complete.57 Supplying triple pole isolators only switch version of miniature circuit breaker of 63A with required wiring connections and lugs etc. in provideddistribution board complete58 Supplying triple pole isolators only switch version of miniature circuit breaker of 100A with required wiring connections and lugs etc. in provided distribution board complete.59 Supplying erecting and marking four pole isolators only switch version of miniature circuit breakers of 80/100A in provided distribution board complete.60 Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB61 Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB62 Supplying, erecting & commissioning 4 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB63 Providing, 4 pole RCCB of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 63A complete as per specification no. SWRCCB/RCCB64 simple bulb 200 watt65 simple bulb 100 watt66 Ponted / Angle bulb holder Supplying Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendent holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box.67 Ceiling fan Supplying and erecting regular/standard model ceiling fan of 1400mm. Sweep complete erected in position as per specification no. FG-FN/CF68 Ceiling fan Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. Energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/ compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF69 Wall fan Supplying cabin fan of A.C. 230 V. 50 cycles 400mm. sweep complete with necessary brackets for fixing cabin fans, wire etc.70 LED tube light 20 WattSupplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty.71 Sinlig Fan Capacitor Supplying condenser 2.5 micro farad for ceiling fan72 Sinlig Fan RegulatorSupplying electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete erected on provided switch board.73 32 amp kitkat grip Supplying HC pattern porcelain fuse bridges with base & HC type fuse links 240V 32A erected on polished wooden block complete.74 63 amp kitkat grip Supplying fuse bridges with base HC type fuse links 240V 63A erected on polished wooden block complete75 100 amp kitkat grip Supplying fuse bridges with base HC type fuse links 415V 100A erected on polished wooden block complete.76 Drill Machine 300 Watt77 Drill Machine 500 Watt78 Drill Bit 6 No.79 Drill Bit 8 No.80 Angle Cutter Machine81 Angle Cutter Machine Blade82 Rubber Gloves (Pair)83 Cooler Fan for 4 to 5 Feet84 Cooler Fan for 7 to 10 Feet85 Submersible Pump for 4 to 5 Feet86 Submersible Pump for 7 to 10 Feet87 Cooler Khas (Sukha)88 Cooler Water Tank for 4 to 5 Feet89 Cooler Capacitor90 Cooler Water Tank for 7 to 10 Feet91 Tab Bundle Box92 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.93 Power Plug Complete Set94 fuse wire 16 no95 fuse wire 18 no96 Screwdriver Set (Small Big)97 LN KEY SET98 wooden hammock99 Extension board 4 or 6 way (3-5 meter wire)100 Supplying and erecting Gate/garden light fitting with 300mm dia. glass bowl suitable for upto 12W LED lamp on provided pipe as per specification no. FG-ODF/GLT101 Supplying and erecting LED Strip light 5m Length Max. 95 W IP20 class having minimum lumens output of 1600 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50 including driver with 1 year warranty.102 Supplying and erecting LED Strip light 5m Length Max. 45 W IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating rangeof 230-270V, Life class of 30,000 Hrs. at L70B50, including driver with 1 year warranty.103 Supplying and erecting integrated LED Bollard Cylindrical/Cubical shaped 500mm 8W IP65 & IK10 class having extrusion aluminum housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with 2 Year warranty as per specification No FG-ODF/FLS2.104 Supplying and erecting integrated LED Post Top 45W IP65 & IK10 class having die cast aluminum housing with UV protected polycarbonate diffuser, having system lumens output of Min.4500 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 30,000 Hrs. at L50B50, including driver complete with 2 Year warranty as per specification No FG ODF/FLS2.105 Supplying and erecting integrated LED round burial light 6W IP65 & IK10 class having pressure die-cast housing, having system lumens output of Min. 500 Lumens, min. efficacy of 85 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 100-240V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L50B50, including driver, salt spray tested for 500 Hrs. including making of recess of appropriate size for flushing into surface with 2 Year warranty as per specification No FG-ODF/FLS2.106 Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.107 Supplying and erecting LED square / circular Max. 25 W down lighter/ Panel Light having pressure die-cast aluminum housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.108 Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminum housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.109 Providing and erecting air circulator 600 mm. sweeposcillating type, wall mounting 1440 RPM without speed regulator, overheat protection unit, totally enclosed, flame proof motor suitable for 230/250 volts single phase, 50 cycles A.C. supply, core lead wire and with moisture proof treatment to winding and with E class insulation.110 Supplying and erecting Electronic type cordless call bell erected on T.W. Board having portable bell push working on 9V D.C. battery and (effective range upto 45 meter) bell on 250 V A.C. supply111 32 amp DP SwitchSupplying double pole switch surface type/ flush type 240V, 32A with indicator lamp & fuse as per specification no. SW-SWR/BDP.112 Digital Multimeter TRMS 6000 Counts Ohmmeter Auto-Ranging Fast Accurately Measures Voltage Current Amp Resistance Diodes Continuity Duty-Cycle Capacitance Temperature (without battery)113 screw 3/4 inch114 skr 1 in115 skr 1.5 in116 skr 2 in117 skr 3 in118 PVC Box 4x4119 MS earthy plate120 Raincoat121 Service Angle (L Type) Nut Bolt Sign122 saw set123 saw blade124 m. Seal packet125 Cutter126 Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete.127 Supplying triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP / TP MCBs of 36 poles / 12 ways on iron / GI frame (vertical busbar type) as per specification no. SW SWR/MCBDB128 MCB box 8 waySupplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-WR/MCBDB129 MCB Box 12 way Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 12 ways /phase (36 poles), with door, 1.2mm thicknesssurface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB130 Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 2 ways (2 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB131 Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB132 Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB133 Hand Dryer machine134 Supplying and erecting electronic type Driver for Outdoor LED Fittings upto 25W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%.135 Supplying and erecting electronic type Driver for Outdoor LED Fittings 26W 45W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%.136 Supplying and erecting electronic type Driver for Outdoor LED Fittings 46W 75W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%.137 Supplying and erecting electronic type Driver for Outdoor LED Fittings 76W 100W suitable to operate on 230V A.C. 50 Hz. Having p138 Supplying and erecting electronic type Driver for Outdoor LED Fittings 101W 150W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and T139 Supplying 230/250V, 50Hz, evaporative air cooler (desert cooler) duct type having normal cooling capacity of 100cu.m per minute, with 15 exhaust, min 75 to 80 liters water capacity tank with galvanized steel sheet with grade 350 minimum, leak or drip free, front grill shall be made of non-corrosive material, circular shall be more than fan sweep opening but not exceeding more than 25mm, filter pads shall be made of wood wool or any other substitute placed in non-corrosive wire mesh and tightened at places with side panels, noise level should not be more than 65dBA at 1m distance, 3 core copper cable minimum 2m length & metal casing of the electrical components, metal frame or chassis of cooler cabinet and all exposed metallic parts, shall be provided with proper earthling complete as per specification no. AP-WCR/DAC140 Supplying 230/250V, 50Hz, evaporative air cooler (desert cooler) duct type having normal cooling capacity of 120cu.m per minute, with 17 exhaust, min 75 to 80 liters water capacity tank with galvanized steel sheet with grade 350 minimum, leak or drip free, front grill shall be made of non-corrosive material, circular opening shall be more than fan sweep but not exceeding more than 25mm, filter pads shall be made of wood wool or any other substitute placed in non-corrosive wire mesh and tightened at places with side panels, noise level should not be more than 65dBA at 1m distance, 3 core copper cable minimum 2m length & metal casing of the electrical components, metal frame or chassis of cooler cabinet and all exposed metallic parts, shall be provided with proper earthling complete as per specification no. AP-WCR/DAC141 Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps, storage capacity of purified water 7 to 8 liter with activated carbon filter and softener operating on 230 V single phase A.C 3-5-1142 Supplying and erecting 12V/180Ah tubular battery with battery terminal wire, duly charged with 36 months warranty complete143 Providing annual comprehensive maintenance contract for 1.5TR split/window air conditioning unit complete as per terms and conditions. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. The job excludes sheet metal work and plastic material144 Providing replacement of existing unserviceable rotary/scroll compressor of air conditioner 1.5 TR by new one of same capacity with guarantee for one year with provided refrigerant complete.145 Providing brazing pipes and checking leakages in the split/window unit duly with dry nitrogen pressure in an approved manner.146 Providing vaccumising the air conditioner system to 200 micron and charging with R32 refrigerant for 1.5TR window/split AC unit.147 Supplying and erecting candle filter with filter pot for water cooler.148 Supplying and erecting connector Pipe for candle filter of water cooler149 Providing replacement of base tray of water cooler of any capacity.150 electronic type 600 W dimmer151 driver for indoor LED upto 9W152 driver for indoor LED upto 10W-18W153 driver for indoor LEDupto 19W-24W154 anchor type fastener fan hook,155 fan hook of 10 mm. M.S. Round bar grouted in RCC slab156 Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. Note: Add Rs 57/- for additional two module box with double mounting plate if required. (only material)157 Providing temporary illumination consisting of white/colour series lights with 8mm LED miniature lamps of 2 to 3.4V [1000nos] with cap with required switchgears erected and dismantled with rotor effect as approved with scaffolding up to three days.158 Providing and fixing temporary electronic rotating machine to give running effect to strips lights and miniature lights up to a load of 5000 W 230v, 50Hz, complete with mains and required switchgears with continuous earth wire and dismantling up to three days.159 Providing, maintaining and operating temporary public address system on hire consisting of 02 Nos. solid state heavy wattage amplifier 250 watts (one for working and another for stand by emergency) working on AC / generator and 24 volt car battery supply, 06 Nos. of matching of 100 volt line (200 watts) box type speakers/sound column, 02 Nos super sensitive microphone with suitable size of microphone holding stand. The system shall be in a fully automatic change over operation in case of failure of supply for one day.160 Providing, maintaining and operating temporary PA audio mixing consoles - stereo with built-in MP3 player, 48V phantom supply on all channels professional mixer with 24 digital effects, 2 group outputs. Mixer shall have 12 MIC and 10 line balanced mono inputs with enhanced headroom & each input channel has a gain control, 4 band active EQ controls, AUX1, AUX2, AUX3/EFX, AUX4/FX and PAN control with channel mute switch, with easy and accurate monitoring of left & right output levels through individual 12 segment LED array, 11 preset EQ settings & headphone output with level control for output monitoring. The system shall be in a fully automatic change over operation in case of failure of supply for one day161 Providing temporary illumination consisting of LED flood light fitting 100w, having color temp up to 6500k, IP65, housing of pressure die cast aluminum alloy and heat sink extruded aluminum complete erected with mains, switchgears with continuous earth wire erected and dismantled with using scaffolding up to three days162 Providing temporary illumination consisting of water proof LED Par Light, 54 pieces x 3W, 230v, 50Hz, with RGBW controller complete erected with mains, switchgears with continuous earth wire erected and dismantled with using scaffolding up to three days163 Providing, commissioning and maintaining temporary CCTV system with 8 channel NVR, IP video/audio input - 1 no, IP based 2.0 MP, Full HD, IR IP dome camera - 2 nos, IP based 2.0 MP, Full HD, IR IP PTZ camera - 2 nos, 2TB Hard Disk - 2 no, 32 Full H D professional Display - 1 no, 8 port PoE Switch - 1 no, Power supply unit to camera - 1 no, On Line UPS UPS - 1 no with necessary mains, switchgears on hire basis for one day 14-1-56164 Providing temporary digital projector having Full HD 1080p resolution with White and Color Brightness at range of 3000-4000lm, HDMI port, USB port, AV port, computer port with spring loaded white screen connected with necessary mains, required switchgears and maintaining the same during the function including dismantling.165 Providing temporary illumination consisting of LED rope light having 4 to 6 W capacity per meter [multi colour] and consisting of suitable power adapter with mains, switchgears erected and dismantled with using scaffolding and maintaining the same up to 3 days166 Providing temporary illumination consisting of flood light fitting 200 W complete LED fitting having color temp up to 6500k, IP65, housing of pressure die cast aluminum alloy and heat sink extruded aluminum complete required switchgear erected and dismantled with using scaffolding up to three days.167 Hiring charges for supplying and maintaining temporary 415V, 50 cycles AC generating set 11 to 25 kVA (excluding 25 kVA) capacity with necessary fuel, mains, switchgears and accessories complete with continuous running on load/no load as per requirements complete with self certification. 14-2-3168 1) Above rates are applicable for first day. For subsequent five days, the above rate shall be reduced by 10% 2) The above rates are inclusive of transportation. 3) The above note does not include preparatory and testing period, and no additional amount shall be paid for that. 4) The above rates are with on load working of DG setupto 5 hours per day. For additional working hours exceeding average 5 hours per day cost of diesel shall be considered as per actual. 5) Lumpsum provision for the additional fuel (if DG set is to be used for more than five hours) shall be made as a separate item in the estimate of temporary D G Set. (Fuel payment shall be made on the basis of actual consumption and invoice produced by Contractor.169 Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP170 Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP171 Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LAONLY Materials172 Ladder on rent for street maintenance of at least 9 meter pole173 ENGINEER /ELECTRICIAN SAFETY JACKETS174 DURACELL ULTRA ALKALINE 9V BATTERIES175 DURACELL ULTRA ALKALINE AAA BATTERIES176 LED Torch Portable Rechargeable Led Lamp Cum Torch with Upto 4hrs Backup177 Supplying and erecting quartz electronic time switch having 24 hour dial to work on 250 V 50 cycle AC having built in rechargeable nickel cadmium batteries to run the time switch on failure of supply having switch contact rating up to 16A to use independently or in conjunction with contactor.178 Supplying and erecting two pole power contactor 230 V, 12 A for time switch complete erected on provided wooden block/ box, with necessary materials.179 Supplying and erecting two pole power contactor 230 V, 32 A for time switch complete erected on provided wooden block/ box, with necessary materials.180 Supplying and erecting four pole power contactor 430 V, 16 A for time switch complete erected on provided wooden block/ box, with necessary materials.181 Supplying and erecting four pole power contactor 430 V, 40 A for time switch complete erected on provided wooden block/ box, with necessary materials.182 Supplying and erecting programmable digital almanac timer microcontroller based with real time clock to operate on derived switching “ON” and switching “OFF” street light as per daily sunset and sunrise respectively automatically having 4 digit LED continuous time display, relay output 230 V / 10A with 10 hrs. battery backup and manual over drive facility capable of driving different capacity contactors timer erected in provided M.S. box.183 Supplying and erecting G.I. stay set for poles, including loop insulators at inaccessible height with anchor plate 300x300x6mm., straining screws, G.l. stay wire 7/10 SWG, G.l. stay rod 20mmx1.8m length and pole clamps duly erected in provided cement concrete foundation complete.184 Supplying and erecting pipe post made from G.I. pipe 40mm dia 3m overall length, with two bends, fixed to pipe at the top & bottom, round bent erected with MS flat welded MS bolts 15cm long duly grouted in wall with necessary clamps, nuts and bolts etc. Duly painted with two coats of aluminum paint complete.185 Supplying and erecting guarding loop using G.l. wire no. 8SWG for LT OH line of horizontal formation erected with 20SWG G.l. wire as binding wire and 50mm section on each side complete.186 Supplying and erecting fibre/PVC spacers for LT overhead line 3 to 5 conductors complete erected.187 Supplying and erecting pole clamp made from 50x6mm MS flat for pole or pipe, post erected with 15mm bolts and nuts duly painted with one coat of red oxide and two coats of aluminum paint complete188 Supplying and erecting pole clamp made from 50x10mm MS flat for pole or pipe, post erected with 15mm bolts and nuts duly painted with one coat of red oxide and two coats of aluminum paint complete.189 Supplying and erecting D type pole clamps, fabricated from 50x6mm MS flat with 15mm bolts and nuts fixed to steel tubular pole duly painted with one coat of red oxide and two coats of aluminum paint complete.190 Supplying and erecting C type (half) clamps for pole made from 50x6mm flat for fixing cross arms by means of 15mm bolts and nuts painted with one coat of red oxide and two coats of aluminum paint complete.191 Dismantling the existing pole up to 6 m height with brackets, clamps, insulators, stay from the c.c. foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level.192 Dismantling the existing pole above 6 m height with brackets, clamps, insulators, stay from the c.c. foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level.193 Dismantling the existing overhead line including G.I. wires of all sizes without damaging & making the coils in suitable sizes.194 Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP195 Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/conduit with screws complete.196 Making cement concrete foundation including excavation (60 x 60 x 150) cm deep in 1:3:6 cement concrete 20 x 25 mm stone metal, (45 x 45 x 45) cm /45 cm dia. x 45 cm height plinth duly plastered, with necessary curing and finishing complete. (above 6 m to 9 m poles)197 Making cement concrete foundation including excavation (60 x 60) cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal, 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and finishing complete. (for above 9 m poles)198 Making cement concrete foundation including excavation (60 x 60 x 150) cm deep in 1:3:6 cement concrete, (20 to 25) mm stone metal with necessary curing and finishing complete.(for stay).199 Painting of pipe pole up to 6 m length along with street light / pole brackets / clamps etc by scrapping the existing paint complete as per specification no CW -PTG/PTP.200 Painting of steel tubular / rail / RSJ pole above 6.0 m length along with street light pole brackets, clamps etc by scrapping the existing paint complete as per specification no CW -PTG/PTP.201 Painting of feeder pillar / switchgears and frame of panel board with single coat of red oxide & two coats of approved quality enamel paint by scrapping existing paint painting the same complete. (while calculating square meter area, area of angle iron frame on which the switchgears are erected shall be considered if required202 Painting identification number by indelible ink marker / enamel paint on fittings / equipment with the help of ladders if necessary by dismantling and refitting the enclosures, tubes etc if required the same and refitting complete.203 Supplying, erecting, testing and commissioning 120 W amplifier suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply complete as per specification no. FF-PA/AFR204 Supplying, erecting, testing and commissioning 15 to 30 Watts sound column or ceiling mounted complete as per specification no. FF-PA/SOC205 Supplying, erecting, testing and commissioning stand mounted/handheld type wired microphone having 2 mV/Pa sensitivity, impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to +55 deg C with min. 7 meter shielded cable and 3 Pin Professional XLR Connector, stereo jack complete as per specification no. FF-PA/MIC206 Supplying, erecting, testing and commissioning rust free microphone floor stand of chrome plating/powder coating or S.S. material, 500 mm to 1500 mm height and sturdy mechanism ensuring trouble free movement complete.207 Supplying, erecting, testing and commissioning of 2 core shielded cable complete as per specification no. FF-PA/MCC208 Supplying, erecting, testing and commissioning of 1.5 sq. mm speaker wire complete.209 Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conforming to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.210 Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conforming to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.211 D.E.OpenJawfixspanner12 piece set - 6 -32 mm212 Bi-hexagon Ring spanner 12 piece set - 6-32mm213 Ballpenhammerwithhandle 800 gm214 Combination side cutting plier 200 mm KDPE coated215 Adjustable wrench chrome vanadium 250 mm - 30 mm216 Pipe wrench stillson pattern carbon steel 450 mm - 60 mm217 Pipe wrench stillson pattern carbon steel 600 mm - 76 mm218 Screw driver Engineering pattern 6 X 300 mm219 Screw driver Engineering pattern 8 X 200 mm220 Screw driver Engineering pattern 5 X 200 mm221 Screw driver Engineering pattern 5 X 300 mm222 Screwdriverwithgreenneon bulb line tester 3.6 X 60 mm223 Hacksawframe 300mmsize with heavy duty blade224 Toolbox fabricated from MS sheet of 18 SWG of size 50 X 30 X 30 cm with locking arrangement225 Coldchisels chromevanadium hexagonal 19/14 - 200 mm226 ChainpipewrenchIS54123-- 210 - 4227 ChainpipewrenchIS54123-- 210 - 6228 25mmdia heavy duty1.2m long crow bar229 12 mmsize 2NTcapacity wirerope3mlongwithdogbolt2 Nos.230 50 mm size G.I. B class pipe 1.5 m long with coupling on both sides, for use as lever231 Central punch Chrome Vanadium steel 175 mm232 Triangularfile300mmsizeof Standard make233 Half round file of 300 mm size Standard make234 Bearing puller three legs -- 8235 Bearing puller three legs -- 10236 Bearing puller three legs -- 12237 Hydraulic flip flop crimping tool suitable for 6 to 500 sq mm size cable lugs (Usha-Ismail or similar make)238 Hand operated crimping tool with set of dies ranging from 6 to 185 sqmm cable lug, in pairs of hand ratchets239 Insulator tester (Megger) cranking type having metal body of range 100 Volts 1000 Ohms.240 Earth Tester - 4 terminals of range 0-10-100-1000-10000 Ohms241 Tong Tester ( Clip on meter ) of range 0-10-30-100-1000Amps and 0-300-600 Volts242 Engineer precision steel level of size 300 mm243 Precisionstainlesssteelrules 500 mm244 Allen Head Wrench Chrome Vanadium 10 piece - 6-10mm245 Tubler box spanner set with Tommy bar 8 piece- 6-22mm246 Diagonal cutting pliers 150mm PVC coated247 Longnose pliers carbon steel 200 mm PVC coated248 Water pump pliers chrome vanadium 259 mm - 40 mm249 Supplying, erecting & terminating FR XLPE insulated, galvanized steel formed wire armored (strip) cable 1100 V, 4 core 10 sq. mm. Aluminum conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/AL250 Supplying and erecting rolled steel joist (girder) pole 125 x 70 mm (13.3 kg/m) with base plate in provided foundation as per specification no. OH-PL/RSJ251 Supplying and erecting M.S. pipe pole B class 80 mm dia 6 m long with pole cap, base plate in provided foundation as per specification no. OH-PL/GIP252 Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no.EA-EP253 Supplying and erecting all aluminum stranded Conductors 7/2.21 mm. complete. (Gnat) (73.77kg/km) as per specification no. OH-CON/AAC254 Supplying and erecting all aluminum stranded conductors 7/3.10 mm. complete. (Ant.) (145.0 kg/km) as per specification no. OH-CON/AAC255 Supplying and erecting 3 phase 5 core 16 sq.mm. (3x16+1x25+1x16) Aerial bunched aluminum cable along with necessary accessories for LT distributionon provided LT pole as per specification no. OH-CBL/ABC256 Supplying and erecting 6 Way AB cable distribution box on provided pole with necessary accessories as per specification no. OH-ABC/JBS257 Supplying and erecting integrated LED street light fitting 23 to 25W IP65 & IK08 class having single piece pressure die-cast aluminum housing, having system lumens output of Min. 2300 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3Years warranty as per specification NoFG-ODF/FLS2.258 Supplying and erecting integrated LED street light fitting 26 to 30W IP65 & IK08 class having single piece pressure die-cast aluminum housing, having system lumens output of Min. 2600 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification NoFG-ODF/FLS2.259 Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminum housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification NoFG-ODF/FLS2.260 Supplying and erecting integrated LED street light fitting 70-75W IP65 & IK08 class having single piece pressure die-cast aluminum housing, having system lumens output of Min. 7700 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification NoFG-ODF/FLS2.261 Supplying and erecting integrated LED street light fitting 100-110W IP65 & IK08 class having single piece pressure die-cast aluminum housing, having system lumens output of Min. 11000 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification NoFG-ODF/FLS2.262 Supplying and erecting integrated LED flood light fitting Max. 70W IP65 & IK07 class having pressure die-cast aluminum housing, having system lumens output of Min. 8400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification NoFG-ODF/FLS2.263 Supplying and erecting integrated LED flood light fitting Max. 120W IP65 & IK07 class having pressure die-cast aluminum housing, having system lumens output of Min.14500 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge Protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification NoFG-ODF/FLS2.264 Supplying and erecting integrated LED flood light fitting Max. 155W IP65 & IK07 class having pressure die-cast aluminum housing, having system lumens output of Min. 18600 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification NoFG-ODF/FLS2.265 Excavating hard Rock or bituminous road by chiselling for preparing pit forpole / stay/earth plate / for laying cable/ pipe & clearing the site by removingdebris & making the site as required complete.266 Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing orange other purpose).
